New issue 111 in Magic Lantern: Bracketing stills
issues-...@bitbucket.org
http://bitbucket.org/hudson/magic-lantern/issue/111/bracketing-stills
Anonymous on Tue, 3 Nov 2009 15:06:24 +0100:
Description:
Have tried the bracketing feature and initially had great success after setting 'liveview' to 'stills only' Got perfect 7 shots exposures -3 to +3ev at 1ev intervals setting, using 8ev steps. Increasing the no of shots to 9 at 8ev steps gave me a perfect -4 to +4 sequence. 5 shots and 3 shot exposures at different intervals also worked perfectly. Increasing the number of shots to 13 however, caused some problems with 4 shots in the sequence at +3ev. Today I tried to repeat all these tests and got progressively poorer inconsistent results, all camera settings were as before. Negative ev shots are always fine but the camera seemed to have problems progressing the exposures sequence above 0ev, resulting in several shots at the same exposure in each set. Increasing the iso (2000!) helped so suspect it may be some sort of buffer issue but find it strange that my previous results had been good at iso 200 with results up to +5ev. Have tried all the liveview settings, removing battery, formatting cards etc but nothing worked today. Wonder if others have had consistent results. Will try again tomorrow.
Simon
--
This is an issue notification from bitbucket.org.
You are receiving this either because you are the
owner of the issue, or you are following the issue.