Google Groups no longer supports new Usenet posts or subscriptions. Historical content remains viewable.
Dismiss
Suction cup grab bars
8 views
Skip to first unread message
greg lee
May 8, 2013, 6:22:41 AM5/8/13
to
Any recommendations?
j
May 8, 2013, 10:28:03 AM5/8/13
to
On 5/8/2013 6:22 AM, greg lee wrote:
> Any recommendations?
>
Not to seem too flippant, but "don't" springs immediately to mind.
If someone needs a grab bar, you want it to be secure. Use anchors and a
glass and tile bit (carbide tip) to drill the holes.
I've put up several of the basic safety type. Similar to this:
http://www.homedepot.com/p/Safety-First-36-in-x-1-1-2-in-Concealed-Screw-Grab-Bar-in-Stainless-Steel-S1F5636SS/202077928#.UYpgCqJ_7w0
Here is a no drill (adhesive) that reviews well:
http://www.homedepot.com/p/No-Drilling-Required-Gripp-24-in-x-1-1-2-in-Grab-Bar-in-Polished-and-Engraved-Stainless-GB38024-PPS-NDR/202819535#.UYpfAqJ_7w0
Test the placement first.
Jeff
> Any recommendations?
>
Not to seem too flippant, but "don't" springs immediately to mind.
If someone needs a grab bar, you want it to be secure. Use anchors and a
glass and tile bit (carbide tip) to drill the holes.
I've put up several of the basic safety type. Similar to this:
http://www.homedepot.com/p/Safety-First-36-in-x-1-1-2-in-Concealed-Screw-Grab-Bar-in-Stainless-Steel-S1F5636SS/202077928#.UYpgCqJ_7w0
Here is a no drill (adhesive) that reviews well:
http://www.homedepot.com/p/No-Drilling-Required-Gripp-24-in-x-1-1-2-in-Grab-Bar-in-Polished-and-Engraved-Stainless-GB38024-PPS-NDR/202819535#.UYpfAqJ_7w0
Test the placement first.
Jeff
BigDog811
May 8, 2013, 4:00:45 PM5/8/13
to
On Wednesday, May 8, 2013 4:22:41 AM UTC-6, greg lee wrote:
> Any recommendations?
Not if you want the person who needs them survive unscathed.
> Any recommendations?
Pay attention to what "j" said.
Jorge
May 21, 2013, 12:39:52 PM5/21/13
to
--
Karma ; what a concept!
j
May 21, 2013, 9:15:16 PM5/21/13
to
0 new messages