MINIX 3.1.6 not work on the real computer!

[Roman Ignatov]

Hi All!

Releases MINIX 3.1.6, 3.1.7 r-2682, 3.1.7 r-6363 not work my computer!
MINIX 3.1.4 and 3.1.5 - worked!
My configuration:

roman@Server:~$ lspci
00:00.0 Memory controller: nVidia Corporation CK804 Memory Controller
(rev a3)
00:01.0 ISA bridge: nVidia Corporation CK804 ISA Bridge (rev a3)
00:01.1 SMBus: nVidia Corporation CK804 SMBus (rev a2)
00:02.0 USB Controller: nVidia Corporation CK804 USB Controller (rev
a2)
00:02.1 USB Controller: nVidia Corporation CK804 USB Controller (rev
a3)
00:04.0 Multimedia audio controller: nVidia Corporation CK804 AC'97
Audio Controller (rev a2)
00:06.0 IDE interface: nVidia Corporation CK804 IDE (rev f2)
00:07.0 IDE interface: nVidia Corporation CK804 Serial ATA Controller
(rev f3)
00:08.0 IDE interface: nVidia Corporation CK804 Serial ATA Controller
(rev f3)
00:09.0 PCI bridge: nVidia Corporation CK804 PCI Bridge (rev a2)
00:0a.0 Bridge: nVidia Corporation CK804 Ethernet Controller (rev a3)
00:0b.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3)
00:0c.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3)
00:0d.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3)
00:0e.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3)
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/
Opteron] HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/
Opteron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/
Opteron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/
Opteron] Miscellaneous Control
01:00.0 VGA compatible controller: ATI Technologies Inc Mobility
Radeon HD 3450
01:00.1 Audio device: ATI Technologies Inc RV620 Audio device [Radeon
HD 34xx Series]
05:07.0 Ethernet controller: D-Link System Inc DL10050 Sundance
Ethernet (rev 14)
05:08.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL-8139/8139C/8139C+ (rev 10)
roman@Server:~$

These releases not works on the real computer!
Check it!

[Fam]

Hi,
I think you should give more detailed information about your problem,
such as the when and how it fails, what is the output on the screen,
etc.

[Roman Ignatov]

The computer constantly reboot or "hangs".
From this CD-disk the virtual machine (QEMU) system work successful!

[Evgeniy Ivanov]

Did you try serial output to test what happens?

> --
> You received this message because you are subscribed to the Google Groups "minix3" group.
> To post to this group, send email to min...@googlegroups.com.
> To unsubscribe from this group, send email to minix3+un...@googlegroups.com.
> For more options, visit this group at http://groups.google.com/group/minix3?hl=en.
>
>

--
Evgeniy Ivanov

[Erik van der Kouwe]

Hi,

> The computer constantly reboot or "hangs".
> From this CD-disk the virtual machine (QEMU) system work successful!

How far does it get before rebooting? What gets printed to the
screen?

Is this after you upgraded using the SVN sources or re-installed using
the CD? In this first case, did you follow the instructions in doc/
UPDATING? In the second case, did the install CD itself boot?

If you use the r6363 boot CD (I have one here:
http://www.cs.vu.nl/~vdkouwe/minix3_1_7_ide_r6363.iso.bz2), try
hitting escape at the boot prompt, setting "verbose=2" and then typing
"boot". What is the last message that gets printed?

Also, it might be interesting to know what type of computer this is,
information such as brand, model and CPU (/proc/cpuinfo in Linux
IIRC).

With kind regards,
Erik