> Sounds good... I'll just keep with the whole "in my locker when you need them" routine. :)
> PeteOn 10/31/12 10:02 AM, Shane wrote:

> I don't have any cash on hand, but if you order extras, I'll gladly buy them as needed.... On Oct 31, 9:47 am, Pete Prodoehl<ras...@gmail.com>wrote:As mentioned, I'm planning to order more of the 1/8" (3mm) wood that works well on the laser cutter:  http://www.woodcraft.com/Product/2004113/7913/Baltic-Birch-Plywood-3mm18-x- 12-x-12.aspxThose 12"x12" pieces are cheap, at $1.59 each, so a dozen is less than $20. Here's who will be ordering this time: Joseph Bozarth - 12 sheets of 1/8" 12"x12" Pete (Me!) - 12 sheets of 1/8" 12"x12" Collin Britt - 1 sheet of 3/4" 12" x 12"  (Assuming this is not for the laser cutter.) Shane - ??? If you want some, or some other wood from Woodcraft, let me know... (If you're not sure about ordering, I usually have some spare sheets in my locker, and if you toss $2 in, you can grab one.) PeteOn 10/18/12 1:11 PM, Joseph Bozarth wrote: Is there no good place to buy it in the area or is it just a lot more expensive? if either is the case I will be placing an order so if anyone wants to add in on that let me know. I was hoping to get this done this weekend is why I ask. (for clarification it is going to be something that sits on the ground. nothing wall mounted)On Thu, Oct 18, 2012 at 12:42 PM, Pete Prodoehl<ras...@gmail.com>wrote: Well, you can flex it... of course you can cut and layer multiple pieces with a bit of glue. PeteOn 10/18/12 12:24 PM, Joseph Bozarth wrote: How strong is the 1/8" stuff? It is for a shelf that isnt going to have to support that much weight (game consoles) but since it is fragile stuff I worry a bit.On Thu, Oct 18, 2012 at 10:04 AM, Pete Prodoehl<ras...@gmail.com>wrote: When the 25 watt was all the rage we found the 3mm (1/8") Baltic Birch plywood worked really well... With the 60 watt I think you can do 4mm or maybe 6mm wood. (Can anyone confirm?) I order sheets from Woodcraft. Order online though, don't go to the local store! And if you do plan on ordering some, others might want to get in on it. (I'd be one of them!) If you just need a few sheets of 3mm thick 300mm x 300mm I have some in my locker... just leave $2.00 per sheet you take. PeteOn 10/18/12 9:41 AM, Joseph Bozarth wrote: Hey, I am working on a design for a shelf and I wanted to cut it out on the 60w laser from that Baltic Birch Plywood that everyone seems to speak so highly of. I was just wondering how thick of wood you can cut and where to pick some of that plywood up. Thanks -- JosephBozarthboza...@gmail.com1(262)498-9762 -- JosephBozarthboza...@gmail.com1(262)498-9762 -- JosephBozarthboza...@gmail.com1(262)498-9762