Received: by 10.58.145.227 with SMTP id sx3mr1781318veb.31.1349370328080;
        Thu, 04 Oct 2012 10:05:28 -0700 (PDT)
X-BeenThere: milwaukeemakerspace@googlegroups.com
Received: by 10.220.107.208 with SMTP id c16ls2461815vcp.3.gmail; Thu, 04 Oct
 2012 10:05:27 -0700 (PDT)
Received: by 10.52.71.38 with SMTP id r6mr1159310vdu.12.1349370327508;
        Thu, 04 Oct 2012 10:05:27 -0700 (PDT)
Date: Thu, 4 Oct 2012 10:05:26 -0700 (PDT)
From: "rod...@rodneydickman.com" <rod...@rodneydickman.com>
To: milwaukeemakerspace@googlegroups.com
Message-Id: <e5b87dd6-0382-4338-98a5-e56e39b08426@googlegroups.com>
In-Reply-To: <345ca748-92ba-4dcb-8f4c-3cf6557a2e2a@googlegroups.com>
References: <345ca748-92ba-4dcb-8f4c-3cf6557a2e2a@googlegroups.com>
Subject: Re: Can I ask a tech question on a heating-A/C unit here?
MIME-Version: 1.0
Content-Type: multipart/mixed; 
	boundary="----=_Part_42_16030399.1349370327094"

------=_Part_42_16030399.1349370327094
Content-Type: multipart/alternative; 
	boundary="----=_Part_43_14384216.1349370327094"

------=_Part_43_14384216.1349370327094
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 7bit


 I've been pondering this and I think I'll do the floor sensing type 
thermostat with a probe. We did not put in a tube to insert a probe into 
the cement floor but the tubing for the system is around 2 inches below the 
top of the cement slab. So I will grind out a valley maybe 3/8" to 1/2" 
deep part way into the room and set a tube so a probe can be inserted (and 
removed if it needs replacing). I've found it a bit hard to find a simple 
wall mount non programmable 24 volt thermostat. Just a simple on of and 
degrees setting is all I want. Many have multiple settings, set back times 
etc. But I found a couple. 

Thanks
Rodney

------=_Part_43_14384216.1349370327094
Content-Type: text/html; charset=utf-8
Content-Transfer-Encoding: 7bit

<br><div>&nbsp;I've been pondering this and I think I'll do the floor sensing type thermostat with a probe. We did not put in a tube to insert a probe into the cement floor but the tubing for the system is around 2 inches below the top of the cement slab. So I will grind out a valley maybe 3/8" to 1/2" deep part way into the room and set a tube so a probe can be inserted (and removed if it needs replacing). I've found it a bit hard to find a simple wall mount non programmable 24 volt thermostat. Just a simple on of and degrees setting is all I want. Many have multiple settings, set back times etc. But I found a couple. <br><br>Thanks<br>Rodney<br></div>
------=_Part_43_14384216.1349370327094--

------=_Part_42_16030399.1349370327094--