> I could not make it tonite as I drove to Union Grove to pick up a table
> saw. Like new (looks never used - guy inherited it from a deceased uncle)
> Craftsman middle of the road aluminum table top saw. Direct drive. OK for
> me. A quality saw is much more and takes up more room so it is a nice
> compromise. $100. Bargain! On the way down on I-94 it rained terribly hard.
> On the way back we could see what looked like a multicar pile up in the
> south bound lanes. A plane ran off the runway and out onto the southbound
> lanes. This is the airport where many parachute west of racine. Looks like
> the pilot and any passengers probably survived. Plane was right across all
> 3 southbound lanes. Traffic was backed up several miles. They closed the
> freeway southbound and cars were turning around and getting off the freeway
> at the previous on ramp. I'm not sure what the semis will do. maybe turn
> them around one by one? Big mess for sure. We must have missed it by just a
> few minutes when we were going southbound. I'm sure it will be on the local
> news tonight.

> Rodney

> On Mon, Oct 22, 2012 at 4:12 PM, Tom Gralewicz <gralew...@gmail.com
> <mailto:gralew...@gmail.com>> wrote:

>     I'm getting an earlier start than I thought and am at lenox now.
>     So come on down!

>     On Oct 21, 2012 10:51 PM, "Tom Gralewicz" <m...@ieee.org
>     <mailto:m...@ieee.org>> wrote:

>         7 at the latest, I plan to try to get there earlier to
>         disconnect the stuff we will pull.

>         Tom

>         On Sun, Oct 21, 2012 at 2:28 PM, Shane <Impe...@hotmail.com
>         <mailto:Impe...@hotmail.com>> wrote:

>             Also, I'm going to try walking there from our current space.

>             Google Maps says it's about 1.2 miles, so it shouldn't be
>             much of a
>             stretch.

>             What time are you actually going to be there?

>             On Oct 21, 2:10 pm, Shane <Impe...@hotmail.com
>             <mailto:Impe...@hotmail.com>> wrote:
>             > I'll try to be there.

>             > Just remember: electricity is magic.  I don't know; I
>             don't wanna
>             > know.  Just point me to the grunt work and promise me
>             that I'll not
>             > turn into a Roman Candle....

>             > On Oct 21, 1:19 pm, Tom Gralewicz <m...@ieee.org
>             <mailto:m...@ieee.org>> wrote:

>             > > I plan to start the un-wiring of Lenox Monday night,
>             this will involve
>             > > pulling back the wiring from the underfloor circuits
>             so we can reuse it
>             > > when we put our wiring in.

>             > > I will disconnect and verify that there is no power to
>             the wires we are
>             > > pulling.

>             > > The fun starts about 7pm if anyone wants to join me.

>             > > Tom

>             > > --
>             > > Tom Gralewicz
>             > > Miller Electronics Recycling
>             > > (414) 380-1716www.deadcomputers.com
>             <http://380-1716www.deadcomputers.com>

>             --

>         --
>         Tom Gralewicz
>         Miller Electronics Recycling
>         (414) 380-1716 <tel:%28414%29%20380-1716>
>         www.deadcomputers.com <http://www.deadcomputers.com>

>     --

> --