Working on the CNC tonight.

[Ben Eishen]

Just letting you guys now I'll be laying the ground work for the CNC tonight.

[Keith]

Ben if you or Kit can use them, I can donate 3 foot lead screws and follower nuts to the cause.

I don’t really have room for a larger CNC. Kit you mentioned building a plasma cutter at one time.

 

The website for the DIY spectrum analyzer is spectralworkbench.org

 

Take Care,

 

Keith  

--
You received this message because you are subscribed to the Google Groups "Midsouth Makers Public List" group.
To unsubscribe from this group and stop receiving emails from it, send an email to midsouth-make...@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.
 
 

[Ben Eishen]

That would be great Keith!

--
Ben S. Eishen
773.234.7436 | b...@eishen.com

[Keith]

I’ll drop them by the Space Saturday with your name on them.

They’re in a 4”x4”x3’ cardboard box.

 

Good luck with the CNC project!

[Ben Eishen]

Will be working on the CNC again tonight around 6:30. Tonight will be the finishing the gantry and starting on the z axis.

Keith:

Thanks again for dropping off the acme rods and nuts. They will work great for the X and Z axis!

--
Ben S. Eishen
773.234.7436 | b...@eishen.com

[claudio donndelinger]

I'll be up there to help and/or get in the way.

Claudio Donndelinger

323-963-3141