Google Groups no longer supports new Usenet posts or subscriptions. Historical content remains viewable.
Dismiss

Re: Sandisk fixed disk utility error #20

107 views
Skip to first unread message

Greg Martin

unread,
May 23, 2004, 8:45:14 AM5/23/04
to
I've received this utility from Sandisk.

I've found that it works great if the CF is the primary disk (using the
cable select, or jumpers), and fails if it is the secondary disk.

There are some options there for disk numbers, but I can't recall them.

Greg Martin.

DaveJones wrote:

> I received the utility from sandisk for marking CF cards as Fixed disks. The problems is I always get a error #20.
>
> Has anyone used this utility that can give me a clue?
>
> I'm using DOS 6.22 with the CF as the primary drive.

Greg Martin

unread,
May 23, 2004, 8:53:58 AM5/23/04
to
Dave,

I've used the utility on DOS 6.22 using the command:
(for a disk on the primary controller) atcfwchg /P /F
(for a disk on the secondary controller) atcfwchg /S /F

But in both instances, the disk is the master on that controller.

cybero2912

unread,
Dec 9, 2004, 3:35:37 AM12/9/04
to

DaveJones wrote:
> *Thanks
>
> The /P /F works good if the CF is on the primary IDE channel. *

Hello all,
could anyone be so kind and send me the ndcfwchg.com and/or
ATCFWCHG.COM utility to rob...@arcor.de
Thanks a lot Robert

--
cybero2912
------------------------------------------------------------------------
Posted via http://www.mcse.ms
------------------------------------------------------------------------
View this thread: http://www.mcse.ms/message701432.html

Simon Wilton

unread,
Dec 9, 2004, 6:53:13 AM12/9/04
to
You need to approach Sandisk direct and sign an NDA to get these.

The person that I contacted was Tuan Dinh Hoang (tdh...@sandisk.com)

HTH

Simon

"cybero2912" <cybero29...@mail.mcse.ms> wrote in message
news:cybero29...@mail.mcse.ms...

0 new messages