Google Groups no longer supports new Usenet posts or subscriptions. Historical content remains viewable.
Dismiss

Unplugged for move -- on power up, clock shows unplug date/time

0 views
Skip to first unread message

jfire7887

unread,
Nov 26, 2009, 12:24:01 AM11/26/09
to
PC disconnected 11/24 at 10pm for move on 11/25. Powered up 11/25 at 7pm,
but shows 11/24 10pm. Is this something that should not be, or did I just
not wait long enough before manually fixing it? It is a Dell Dimension L_r
that was originally shipped with ME but was upgraded to XP.

J. P. Gilliver (John)

unread,
Nov 26, 2009, 3:49:01 AM11/26/09
to
In message <EA0409DD-1F2F-442C...@microsoft.com>,

Assuming 11/24 and 11/25 really mean 25/11 and 24/11 (-:, then no, it
shouldn't be; suggests the internal clock stopped. Not sure what you
mean by "wait long enough before manually fixing it".

It's unusual for the clock just to stop - it usually reverts to Jan 1
1980 or something like that, depending on the clock chip.

The usual reason is it's not getting power from the internal cell. This
could be because it is failing - a PC originally shipped with Me will be
a fair few years old now, and I've heard a figure of five years for the
cells (though IME they usually last far longer than that), or because it
has jarred loose in the move. Have a look (and if you have a voltmeter,
measure it - it should be at least 3 volts - I think they start around
3.2, and the circuitry will work down to surprisingly low, approaching
1.5 or 1.7): it's almost certain to be a CR2032, a round flat cell.

If it is failing (cell running down or loose), the PC may start to lose
other important settings, so don't leave it long; at worst, it can
corrupt the settings for the HD (number of sectors and cylinders), which
_could_ cause the PC to corrupt the HD in a way which would be difficult
to recover from, though in most cases it'll just autofind the settings
correctly each boot.
--
J. P. Gilliver. UMRA: 1960/<1985 MB++G.5AL-IS-P--Ch++(p)Ar@T0H+Sh0!:`)DNAf
** http://www.soft255.demon.co.uk/G6JPG-PC/JPGminPC.htm for ludicrously
outdated thoughts on PCs. **

Are you sure your circuits are functioning correctly? Your ears are green!

Tim Meddick

unread,
Nov 27, 2009, 6:33:52 PM11/27/09
to

Mr Gilliver - May I suggest that the UK is not the only country in the world, and
that the OP was probably posting out of the USA where you may possibly realize that
they use the reverse of our notation for month/date, or should I say date/month?

You should expand your view on the world into a "world view"...

==

Cheers, Tim Meddick, Peckham, London. :-)


J. P. Gilliver (John)

unread,
Nov 28, 2009, 4:28:10 PM11/28/09
to
In message <#4vOZo7b...@TK2MSFTNGP04.phx.gbl>, Tim Meddick
I realised that, certainly; you may not have noticed the smiley. I was
just in effect saying the same thing as you, but from the other
perspective (-:

--
J. P. Gilliver. UMRA: 1960/<1985 MB++G.5AL-IS-P--Ch++(p)Ar@T0H+Sh0!:`)DNAf
** http://www.soft255.demon.co.uk/G6JPG-PC/JPGminPC.htm for ludicrously
outdated thoughts on PCs. **

There are more bits in a 32-ton lorry driving up the motorway than the whole BT
net carries in an hour. (Duncan Hine of the Post Office, in Computing
1997-4-10)

Tim Meddick

unread,
Nov 29, 2009, 8:35:54 PM11/29/09
to
Thankyou for the feedback......

==

Cheers, Tim Meddick, Peckham, London. :-)


"J. P. Gilliver (John)" <G6...@soft255.demon.co.uk> wrote in message
>
>
> <clipped>
>
>

0 new messages