Google Groups no longer supports new Usenet posts or subscriptions. Historical content remains viewable.
Dismiss

Kodak EasyShare and KB954430...

148 views
Skip to first unread message

Ron

unread,
Nov 13, 2008, 2:45:37 PM11/13/08
to
Kodak's latest update for their EasyShare software, apparently breaks
the KB954430 update for XP SP3, again related to Microsoft XML Core
Services 4.0 Service Pack. Many of us went through the same thing with
EasyShare and KB936181. So if you are running XP and EasyShare, be aware
that you may experience similar problems with Kodak's software update.

Serge

unread,
Nov 16, 2008, 1:33:02 PM11/16/08
to

"Ron" wrote:

> It looks as we are back to square one. Did you find a solution to the KB954430 problem caused by the EasyShare upgrade.

Serge

dp

unread,
Nov 16, 2008, 11:12:01 PM11/16/08
to
I have the same problem I cannot upgrade either one now been working on this
with since the notification to upgrade.

let me know if you find anything I also went to windows live one care no luck.

dp

Serge

unread,
Nov 17, 2008, 2:17:01 PM11/17/08
to

"dp" wrote:

> I have the same problem I cannot upgrade either one now been working on this
> with since the notification to upgrade.
>
> let me know if you find anything I also went to windows live one care no luck.
>
> dp
>

Clarify "I can not upgrade.". Do you mean you can not download and install
the upgrade KB954430 or that the upgrade is being reoffered again and again
after being installed?

I have manage to find a solution for KB954430 in the case of when it is
reoffered.

Let me know which is which.

Serge


djowdji

unread,
Nov 18, 2008, 10:56:02 AM11/18/08
to
this is the same problem that i have experienced, the down load is prompted,
& after download is complete it is labeled successfully installed, however,
within a short period of time, usually 2 minutes, you are that important
downloads are available, if you look it up, it is the same download,
kb954430, i have kodak easy share software installed, in fact the latest &
greatest as we had a printer issue last week, if you could tell me how to
stop this, it would be greatly appreciated, thanx! djowdji
--
djowdji

Serge

unread,
Nov 18, 2008, 2:56:04 PM11/18/08
to

"djowdji" wrote:

> this is the same problem that i have experienced, the down load is prompted,
> & after download is complete it is labeled successfully installed, however,
> within a short period of time, usually 2 minutes, you are that important
> downloads are available, if you look it up, it is the same download,
> kb954430, i have kodak easy share software installed, in fact the latest &
> greatest as we had a printer issue last week, if you could tell me how to
> stop this, it would be greatly appreciated, thanx! djowdji
> --
> djowdji
>
>

1. Using Microsoft update I hid KB 954430 so that it was not reoffered
while I found a solution. I hid it because I do not like turning off
automatic update. Turning off the Automatic update would give the same
result. Make sure you remember to turn it back on. :-)

2. Downloaded MSXML4-KB954430-enu.exe from:

http://www.microsoft.com/downloads/details.aspx?FamilyID=96a4413c-5261-4f69-83d0-932c430abd14&DisplayLang=en

3. Deleted MSXML4-KB954430 using Add Remove program in control panel.

4. Installed MSXML4-KB954430-enu.exe by clicking on it.

KB954430 has not been reoffered ever since.

A word to the wise, the same problem might arise every time you repair or
upgrade Kodak Easyshare software. Keep the solution handy. It did happen to
me with KB936181.

It worked for me I hope it works for you. Let me know how it turns out.

Serge

Serge

unread,
Nov 19, 2008, 1:08:00 AM11/19/08
to

"Serge" wrote:

I just had to repair Kodak Easyshare software and KB936181 showed up its
ugly head again. I had to fix both KB936181 and KB954430.


If you ever have a problem with KB936181, apply the same solution. You will
find MSXML4-KB936181-enu.exe at:

http://www.microsoft.com/downloads/details.aspx?FamilyId=021E12F5-CB46-43DF-A2B8-185639BA2807&displaylang=en


Serge


djowdji,

I just had to repair Kodak Easyshare software and KB936181 showed up its
ugly head again. I had to fix both KB936181 and KB954430.


If you ever have a problem with KB936181, apply the same solution. You will
find MSXML4-KB936181-enu.exe at:

http://www.microsoft.com/downloads/details.aspx?FamilyId=021E12F5-CB46-43DF-A2B8-185639BA2807&displaylang=en

Serge

Striper6250

unread,
Nov 25, 2008, 2:29:07 PM11/25/08
to
After reading what Serge wrote, I removed KB954430 and then all I did was
close the AIO status monitor in the tray and then downloaded KB954430.
Rebooted and the problem was solved.

Bob07731

unread,
Dec 20, 2008, 1:13:31 PM12/20/08
to
On Nov 18, 2:56 pm, Serge <Se...@discussions.microsoft.com> wrote:
> "djowdji" wrote:
> > this is the same problem that i have experienced, the down load is prompted,
> > & after download is complete it is labeled successfully installed, however,
> > within a short period of time, usually 2 minutes, you are that  important
> > downloads are available, if you look it up, it is the same download,
> > kb954430, i have kodak easy share software installed, in fact the latest &
> > greatest as we had a printer issue last week, if you could tell me how to
> > stop this, it would be greatly appreciated, thanx! djowdji
> > --
> > djowdji
>
>  1. Using Microsoft update I hid KB 954430 so that it was not reoffered
> while I found a solution. I hid it because I do not like turning off
> automatic update.  Turning off the Automatic update would give the same
> result.  Make sure you remember to turn it back on. :-)
>
> 2. Downloaded MSXML4-KB954430-enu.exe from:
>
> http://www.microsoft.com/downloads/details.aspx?FamilyID=96a4413c-526...

>
> 3. Deleted MSXML4-KB954430 using Add Remove program in control panel.
>
> 4. Installed MSXML4-KB954430-enu.exe by clicking on it.
>
> KB954430 has not been reoffered ever since.
>
> A word to the wise, the same problem might arise every time you repair or
> upgrade Kodak Easyshare software.  Keep the solution handy.  It did happen to
> me with KB936181.
>
> It worked for me I hope it works for you. Let me know how it turns out.
>
> Serge


I get these "results"
> 3. Deleted MSXML4-KB954430 using Add Remove program in control panel. <<<<<<<<<<<<<I don't see that option, while using Windows Vista.
>
> 4. Installed MSXML4-KB954430-enu.exe by clicking on it. I downloaded it 4 times, and get the same results. (Error opening istallation log file. Verify the the specified log file location exists and is writeable.)
>

Ron

unread,
Dec 20, 2008, 1:47:29 PM12/20/08
to
Bob07731 wrote:
> On Nov 18, 2:56 pm, Serge <Se...@discussions.microsoft.com> wrote:
<SNIP>

> I get these "results"
>> 3. Deleted MSXML4-KB954430 using Add Remove program in control
>> panel. <<<<<<<<<<<<<
>> I don't see that option, while using Windows Vista.

Instead of looking under the Windows Security Updates, look under the
Add/Remove Programs list beginning with the first letter of "M" and
you'll probably find it. I missed it the first time I looked for it, and
several other people have also.

Specifically, look for:

MSXML 4.0 SP2 (KB954430)

supiordude

unread,
Dec 25, 2008, 3:40:00 PM12/25/08
to
thats pretty sweet you guys can actually at least install the software mine
wont let me install it it gives me an error message 16x18x0x wtf

Ron

unread,
Dec 25, 2008, 6:45:40 PM12/25/08
to
supiordude wrote:
> thats pretty sweet you guys can actually at least install the
> software mine wont let me install it it gives me an error message
> 16x18x0x wtf

Try this fix for that particular error:

http://faqs.kodak.com/22_en/FAQ_13_410.shtm

mjboross

unread,
Jan 2, 2009, 3:50:09 PM1/2/09
to
I uninstalled easyshare and KB954430, and then reloaded the patch and it
stayed loaded and all is fine.
My question is: can I now reload easyshare?
I have xp and service pack 2.

mike
--
mike

Ron

unread,
Jan 3, 2009, 3:43:29 AM1/3/09
to
mjboross wrote:
> I uninstalled easyshare and KB954430, and then reloaded the patch and
> it stayed loaded and all is fine.
> My question is: can I now reload easyshare?
> I have xp and service pack 2.

Most likely, Easyshare will cause a rollback of that update, and set
Windows KB954430 back into update mode, and possibly KB936181 now that
you have uninstalled Easyshare all the way, depending on Kodak's program
removal methods. Install Easyshare and if Windows can't install
KB954430, follow the method quoted further below, and KB954430 should
stay updated. And if Windows won't successfuly update KB936181, you may
have to fix it too. To fix KB936181 have a look at the full message at
the link below:

http://groups.google.com/group/microsoft.public.windowsupdate/msg/9fe4edf7b2f3fde5?hl=en

98Toyota

unread,
Jan 27, 2009, 11:40:03 AM1/27/09
to

--
98Toyota

I have the same problem on Windows Vista Home Premium but don't have Kodak
EasyShare installed. I tried your solution with a little extra steps:

1. Installed sucessfully KB954430 one last time from Automatic Updates,
which also removed the Reminder Icon from the Sytem Tray.
2. Turned off Windows Updates before the Reminder came back on.


3. Deleted MSXML4-KB954430 using Add Remove program in control panel.

4. Restarted myPC.
5. Installed MSXML4-KB954430-enu.exe by clicking on it. (I had previously
downloaded it and savedit on my C: drive.)
6. Installation failed with a Windows Installer error: "Error opening
installation log file. Verify that the specified log file location exits and
is writable."
7. End of error message - no log file name provided nor its location.
8. I had similar results with other downloaded updates, but not all of them.
Some do install sucessfully (KB927978 and KB925672).

Any assistance will be greatly appreciated.

98Toyota

N!K

unread,
Apr 6, 2009, 3:22:04 PM4/6/09
to
@98Toyota: Did you solve the issue. Same problem here bro.

tinman11

unread,
May 28, 2009, 6:38:01 PM5/28/09
to

"Serge" wrote:

> >:TINMAN agrees it worked for me after 3&1/2 mths.

@discussions.microsoft.com Joyce S

unread,
Jun 22, 2009, 9:32:01 PM6/22/09
to

Thanks for fixing the KB954430 problem. Just wish someone could solve my
Kodak problem. My Kodak easyshare program stopped working last week. I
uninstalled it, used the Kodak clear utility program and then reinstalled it,
but it will not install. I get the error (1606x97x2103064800x). Talked to
Kodak by phone last week for one hour. They told me their technicans would
call me, but as of today they haven't. Chatted on-line today for an hour but
problem is still not fixed. He told me to shut off my firewall and
anti-virus program and try using the clear utility program and then download
easyshare again. I did as he said but it still will not install. Any help
you can give me will be appreciated.
--
Joyce


"Bob07731" wrote:

> On Nov 18, 2:56 pm, Serge <Se...@discussions.microsoft.com> wrote:
> > "djowdji" wrote:
> > > this is the same problem that i have experienced, the down load is prompted,
> > > & after download is complete it is labeled successfully installed, however,
> > > within a short period of time, usually 2 minutes, you are that important
> > > downloads are available, if you look it up, it is the same download,
> > > kb954430, i have kodak easy share software installed, in fact the latest &
> > > greatest as we had a printer issue last week, if you could tell me how to
> > > stop this, it would be greatly appreciated, thanx! djowdji
> > > --
> > > djowdji
> >
> > 1. Using Microsoft update I hid KB 954430 so that it was not reoffered
> > while I found a solution. I hid it because I do not like turning off
> > automatic update. Turning off the Automatic update would give the same
> > result. Make sure you remember to turn it back on. :-)
> >
> > 2. Downloaded MSXML4-KB954430-enu.exe from:
> >

> > http://www.microsoft.com/downloads/details.aspx?FamilyID=96a4413c-526....

PA Bear [MS MVP]

unread,
Jun 22, 2009, 11:11:11 PM6/22/09
to

How does your problem pertain to Windows Update?

Joyce S wrote:
> Thanks for fixing the KB954430 problem. Just wish someone could solve my
> Kodak problem. My Kodak easyshare program stopped working last week. I
> uninstalled it, used the Kodak clear utility program and then reinstalled
> it, but it will not install. I get the error (1606x97x2103064800x).
> Talked to Kodak by phone last week for one hour. They told me their
> technicans would call me, but as of today they haven't. Chatted on-line
> today for an hour but problem is still not fixed. He told me to shut off
> my firewall and anti-virus program and try using the clear utility program
> and then download easyshare again. I did as he said but it still will not
> install. Any help you can give me will be appreciated.

<snip>

szn1

unread,
Aug 22, 2009, 1:38:47 AM8/22/09
to

hi thanks for the info, i dont know about kodak software but i tried to
fix KB954430, uninstalled from control panel and downloaded from
microsoft site and when i tried to install I am getting this error
message.

"error opening installation log file.verify that the specified log file
location exist and writable"

any suggestions?


--
szn1
------------------------------------------------------------------------
szn1's Profile: http://forums.techarena.in/members/127323.htm
View this thread: http://forums.techarena.in/windows-update/1071250.htm

http://forums.techarena.in

Robert Aldwinckle

unread,
Aug 22, 2009, 9:23:52 AM8/22/09
to

"szn1" <szn1....@DoNotSpam.com> wrote in message news:szn1....@DoNotSpam.com...

11/13/2008 11:52 AM PST
http://www.microsoft.com/communities/newsgroups/en-us/default.aspx?&query=KB954430&lang=en&cr=US&guid=&sloc=en-us&dg=microsoft.public.windowsupdate&p=1&tid=a164e18b-b38c-4f07-ad57-12ad8d8a3d24

>
> hi thanks for the info, i dont know about kodak software


Then why are you reopening this old thread with your Me too! post?
There are plenty of other more recent discussions about this update
some which have even been marked as Answered Questions.


> but i tried to
> fix KB954430, uninstalled from control panel and downloaded from
> microsoft site and when i tried to install I am getting this error
> message.

>
> "error opening installation log file.verify that the specified log file
> location exist and writable"


Which doesn't even necessarily have anything to do with the update
you are referring to.


>
> any suggestions?


Search with your error message as a quoted string. Pick one:

http://www.microsoft.com/communities/newsgroups/en-us/default.aspx?query=%22error+opening+installation+log+file%22&dg=microsoft.public.windowsupdate&cat=en_US_2231886c-4c59-45b0-92e0-8881ddf5f40b&lang=en&cr=US&pt=&catlist=&dglist=&ptlist=&exp=&sloc=en-us

(Alt-7 search for
"error opening installation log file"
)

To refine your search you could try using the Answered Questions filter
but be aware that since few posters actually mark the answers they get
this is not a very reliable tool. A better filter for finding threads with
answers in them is to add the string MVP to your search expression.

BTW if this doesn't help please start your own thread with your own
details to prevent a further hijacking of this one.


Good luck

Robert Aldwinckle
---

0 new messages