Disable Usb host at runtime

[FmF via PocketPCJunkies.com]

Hi guys,

I have a camera and a device (PDA running windows mobile 5.0).
I developped an application to transfer files from the camera. The device see
the camera as a Mass Storage Device.

The problem is that I can´t use the camera (I mean takes photos) while it's
connected to the device. I know there exists PTP but I don´t wan´t to use it.

I need to disconnected or disable the usb interface so that i can use the
camera for a while and then connect or enable the usb interfae again.

device (usb host) <-------------------- Camera (Mass Storage device)

Any suggestion ?

Thanks,

FmF

--
Message posted via http://www.pocketpcjunkies.com

[FmF via PocketPCJunkies.com]

Ops I forgot to say "disconnect" doesn´t mean ¨unplug usb cable¨.

--
Message posted via PocketPCJunkies.com
http://www.pocketpcjunkies.com/Uwe/Forums.aspx/wince-pb/200911/1

[Jojje]

If you have the possibility to set the USB host port in suspend mode
setting or turn off the +5V in the host port I believe that the camera
will be disconnected.

Regards,
Jojje