problem with evc4 and stl and WM5.0 pocket pc emulator

[Ed]

I have an app developed by evc4 and stl,
I run the app in device, it worked ok, but runing in emulator
It said that "out of memory". I never raised any exception in app,
I search all sources, then I found "out of memory" in stl source list,
so I guess problem is in there, my stl download from
http://users.libero.it/g.govi/stlport_ce_en.html

Anybody has experience of stl in evc4, give me some suggestions,
be greatly appreciated.

[Bruce Eitman [eMVP]]

You don't say a word about having actually checked to see how much memory is
available on the emulator, or the device. Wouldn't that be important?

--
Bruce Eitman (eMVP)
Senior Engineer
Bruce.Eitman AT Eurotech DOT com
My BLOG http://geekswithblogs.net/bruceeitman

Eurotech Inc.
www.Eurotech.com

"Ed" <jian...@gmail.com> wrote in message news:u1viiv...@gmail.com...

[Ed]

The device and emulator are both 128m.
The app work ok in device, but why didn't in emulator

The emulator was downloaded from MS site.

[Bruce Eitman [eMVP]]

And how much of that RAM is available when your app is running?

--
Bruce Eitman (eMVP)
Senior Engineer
Bruce.Eitman AT Eurotech DOT com
My BLOG http://geekswithblogs.net/bruceeitman

Eurotech Inc.
www.Eurotech.com

"Ed" <E...@guess.com> wrote in message news:u3a2vb...@guess.com...

[Ulrich Eckhardt]

The remedy is simple:
1. Set a breakpoint, examine what is going on.
2. If you found a bug, notify the maintainer of the CE port of STL.
3. If that doesn't help, you could instead switch to a full implementation
of the standard C++ library, like e.g. STLport. Note that the STL is not
such an implementation.

Uli

--
Sator Laser GmbH
Geschäftsführer: Thorsten Föcking, Amtsgericht Hamburg HR B62 932