Google Groups no longer supports new Usenet posts or subscriptions. Historical content remains viewable.
Dismiss

Re: VPN on 2003 Sp1

2 views
Skip to first unread message

Robert L [MS-MVP]

unread,
May 10, 2005, 4:54:47 PM5/10/05
to
can you ping the IP?
For more and other information, go to http://howtonetworking.com.

Don't send e-mail or reply to me except you need consulting services. Posting on MS newsgroup will benefit all readers and you may get more help.

Bob Lin, MS-MVP, MCSE & CNE
How to Setup Windows, Network, Remote Access on http://www.HowToNetworking.com
Networking, Internet, Routing, VPN Troubleshooting on http://www.ChicagoTech.net
This posting is provided "AS IS" with no warranties.

Pre Sp1 VPN's work as desired - using RRAS and PPTP.  I'm using remote XP
clients.

After Sp1, I can create the VPN but no longer map a drive or ping.

Is there a setting I'm missing?

Thanks,
Steve.

Sawlmgsj

unread,
May 11, 2005, 2:21:08 AM5/11/05
to
Thanks Robert for the response.

I cannot ping the IP address of the server after Sp1.

Steve.

Robert L [MS-MVP]

unread,
May 11, 2005, 12:59:10 PM5/11/05
to
we need more information to help.
 
1. assuming you have just one NIC in the server, use ipconfig to find out PPTP IP and ping that ip from VPN client. If it doesn't work, check if any firewall blocking the ping.
2. If you have two NICs, have you enabled the NAT?
 
For more and other information, go to http://howtonetworking.com.

Don't send e-mail or reply to me except you need consulting services. Posting on MS newsgroup will benefit all readers and you may get more help.

Bob Lin, MS-MVP, MCSE & CNE
How to Setup Windows, Network, Remote Access on http://www.HowToNetworking.com
Networking, Internet, Routing, VPN Troubleshooting on http://www.ChicagoTech.net
This posting is provided "AS IS" with no warranties.

Sawlmgsj

unread,
May 11, 2005, 12:31:04 PM5/11/05
to
Thanks again Robert. I've tried it again and now it's working. I must have
been doing something daft at the time.

Regards,

0 new messages