A very strange problem ...
Dark Star
i am facing this problem that i dont understand ..
Well when working on the internet suddenly my internet "web browsing ,IM
services , nntp etc etc " stops although my lan keeps woking "network
neighbourhood , ping etc etc "
then when i disable my LAN connection in network connections then enable it
a few times over & over again it start working again ... then later on this
happens again .
what can be wrong ?
i have tried updating my NIC drivers from the vendor website , hell i have
even changed the brand of my NIC but still the problem remains ...
Robert L
any errors about browser or NIC in event viewer?
--
For more information, go to http://www25.brinkster.com/ChicagoTech
Please don't send e-mail or reply to me except you need consulting services.
Posting on MS newsgroup will benefit all readers and you may get more help.
Robert Lin, CNE & MCSE
Windows & Network Support, Tips and FAQs on
http://www25.brinkster.com/ChicagoTech
This posting is provided "AS IS" with no warranties.
"Dark Star" <fas...@yahoo.com> wrote in message
news:#N0nWQ0zCHA.2232@TK2MSFTNGP09...
Dark Star
tell me wat you think ..
here is the error
Event Type: Error
Event Source: Application Error
Event Category: (100)
Event ID: 1000
Date: 2/7/2003
Time: 2:50:49 PM
User: N/A
Computer: SERVERXX
Description:
Faulting application IEXPLORE.EXE, version 6.0.3718.0, faulting module
unknown, version 0.0.0.0, fault address 0x00000000.
For more information, see Help and Support Center at
http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 41 70 70 6c 69 63 61 74 Applicat
0008: 69 6f 6e 20 46 61 69 6c ion Fail
0010: 75 72 65 20 20 49 45 58 ure IEX
0018: 50 4c 4f 52 45 2e 45 58 PLORE.EX
0020: 45 20 36 2e 30 2e 33 37 E 6.0.37
0028: 31 38 2e 30 20 69 6e 20 18.0 in
0030: 75 6e 6b 6e 6f 77 6e 20 unknown
0038: 30 2e 30 2e 30 2e 30 20 0.0.0.0
0040: 61 74 20 6f 66 66 73 65 at offse
0048: 74 20 30 30 30 30 30 30 t 000000
0050: 30 30 00
"Robert L" <bobl...@hotmail.com> wrote in message
news:#QqMOM5zCHA.1132@TK2MSFTNGP10...
Robert L
sounds like routing issue. could you please post route table here by using
route print.
--
For more information, go to http://www25.brinkster.com/ChicagoTech
Please don't send e-mail or reply to me except you need consulting services.
Posting on MS newsgroup will benefit all readers and you may get more help.
Robert Lin, CNE & MCSE
Windows & Network Support, Tips and FAQs on
http://www25.brinkster.com/ChicagoTech
This posting is provided "AS IS" with no warranties.
"Dark Star" <fas...@yahoo.com> wrote in message
news:eWWtWK6zCHA.2916@TK2MSFTNGP09...
Dark Star
===========================================================================
Interface List
0x1 ........................... MS TCP Loopback interface
0x50002 ...00 50 bf 95 dc be ...... ADMtek AN983 10/100 PCI Adapter - Packet
Sch
eduler Miniport
===========================================================================
===========================================================================
Active Routes:
Network Destination Netmask Gateway Interface Metric
0.0.0.0 0.0.0.0 10.0.0.1 10.0.0.2 20
10.0.0.0 255.255.255.0 10.0.0.2 10.0.0.2 20
10.0.0.2 255.255.255.255 127.0.0.1 127.0.0.1 20
10.255.255.255 255.255.255.255 10.0.0.2 10.0.0.2 20
127.0.0.0 255.0.0.0 127.0.0.1 127.0.0.1 1
224.0.0.0 240.0.0.0 10.0.0.2 10.0.0.2 20
255.255.255.255 255.255.255.255 10.0.0.2 10.0.0.2 1
Default Gateway: 10.0.0.1
===========================================================================
Persistent Routes:
None
here you go man ... thanks for the help
"Robert L" <bobl...@hotmail.com> wrote in message
news:uxQ2D47zCHA.2552@TK2MSFTNGP12...
Doug Sherman
because the route table only shows one interface. Also, your problem may be
with the device functioning as your default gateway at 10.0.0.1.
Doug Sherman
MCSE Win2k/NT4.0 MCSA MCP+I
"Dark Star" <fas...@yahoo.com> wrote in message
news:OxG#5x$zCHA.2916@TK2MSFTNGP09...
Robert L
--
For more information, go to http://www25.brinkster.com/ChicagoTech
Please don't send e-mail or reply to me except you need consulting services.
Posting on MS newsgroup will benefit all readers and you may get more help.
Robert Lin, CNE & MCSE
Windows & Network Support, Tips and FAQs on
http://www25.brinkster.com/ChicagoTech
This posting is provided "AS IS" with no warranties.
"Dark Star" <fas...@yahoo.com> wrote in message
news:OxG#5x$zCHA.2916@TK2MSFTNGP09...
Dark Star
which server u want ? naat server ?
if yes then here is it
but non of the other clients of the naat server are having this problem ...
===========================================================================
Interface List
0x1 ........................... MS TCP Loopback interface
0x2 ...00 02 44 0e 9f 2e ...... NDIS 5.0 driver
(Microsoft's Packet Scheduler)
0x3 ...00 c1 26 10 b1 8f ...... NDIS 5.0 driver
(Microsoft's Packet Scheduler)
===========================================================================
===========================================================================
Active Routes:
Network Destination Netmask Gateway Interface Metric
0.0.0.0 0.0.0.0 192.168.1.1 192.168.1.2 1
10.0.0.0 255.0.0.0 10.0.0.1 10.0.0.1 1
10.0.0.1 255.255.255.255 127.0.0.1 127.0.0.1 1
10.255.255.255 255.255.255.255 10.0.0.1 10.0.0.1 1
127.0.0.0 255.0.0.0 127.0.0.1 127.0.0.1 1
192.168.1.0 255.255.255.0 192.168.1.2 192.168.1.2 1
192.168.1.2 255.255.255.255 127.0.0.1 127.0.0.1 1
192.168.1.255 255.255.255.255 192.168.1.2 192.168.1.2 1
224.0.0.0 224.0.0.0 10.0.0.1 10.0.0.1 1
224.0.0.0 224.0.0.0 192.168.1.2 192.168.1.2 1
255.255.255.255 255.255.255.255 192.168.1.2 192.168.1.2 1
Default Gateway: 192.168.1.1
===========================================================================
Persistent Routes:
None
"Robert L" <bobl...@hotmail.com> wrote in message
news:#QM8vdF0CHA.1636@TK2MSFTNGP12...
Robert L
server have two nics, one (10.0.0.1) connecting to the LAN and the second
one (192.168.1.2) connecting to another network or a router. I am also
assuming that the DG is a router which connecting to the Internet. if above
assuming is true, you should enable ip routing on the server, 192.168.1.2
NIC dg should be 192.168.1.1 and 10.0.0.2 should not have dg.
If the above assuming is incorrect, you need to provide details about your
network settings. also you may want to use pathping from a client, to find
out where it is going to.
--
For more information, go to http://www25.brinkster.com/ChicagoTech
Please don't send e-mail or reply to me except you need consulting services.
Posting on MS newsgroup will benefit all readers and you may get more help.
Robert Lin, CNE & MCSE
Windows & Network Support, Tips and FAQs on
http://www25.brinkster.com/ChicagoTech
This posting is provided "AS IS" with no warranties.
"Dark Star" <fas...@yahoo.com> wrote in message
news:e$fFJlG0CHA.2648@TK2MSFTNGP11...
Dark Star
i take out the 2nd nic in my server now it is single homed ..
1 nic DG = 10.0.0.1 "my Naat server which is connected to the internet "
ip = 10.0.0.2
a webserver also running on the server
thankx for the help
"Robert L" <bobl...@hotmail.com> wrote in message
news:#jJvwGK0CHA.1840@TK2MSFTNGP12...