Is the problem gobal, everything onscreen, or just OE"
In OE, for just OE:
Try switching the OE Font to Verdana. It's a larger typeface in Tools;
Options; Compose tab.
And switch the fonts to Verdana in the "Read" tab. Now you've covered both
in/out going mails.
If you use HTML mails and stationary, the stationary can override settings
and have small print. Don't use stationary & see what happens.
If you receive HTML mails, it could be the Sender is simply using smaller
print that you can read easily. Remove the tick in Options to Reply in Kind.
Globally:
Try a lower screen resolution. Monitors always recommend a very high
resolution which can result in what you have.
At Control Panel, click the Display icon and select the Apperance tab. There
you can set the windows display screen font sizes.
Also in the same Display dialogs, usually in the Settings; Advanced (varies
with video card) you can set the DPI. Setting this larger will make
everything on the screen appear larger, including text. It's Normally set at
96 DPI. Set it to the 120% setting and see if that helps. If not, there is a
Custom Setting where you can enter larger numbers such as 150%, etc..
There might be other ways too; these are just off the top of my head.
HTH,
Twayne
--
--
Often you'll find excellent advice on a newsgroup.
Before you use that advice though, consider the
ramifications of it being wrong or even dangerous;
how important IS that to you?
ALWAYS verify and confirm ANY advice from a
newsgroup!
Control Panel | Display | Settings | Screen resolution: Is the slider all
the way over to the right?
steve
"walt" <wru...@optonline.net> wrote in message
news:7b1a59ff-8c12-4d44...@o28g2000yqh.googlegroups.com...