Google Groups no longer supports new Usenet posts or subscriptions. Historical content remains viewable.
Dismiss

DirectX diagnostics results after upgrade to new ATI video card

8 views
Skip to first unread message

udidwht

unread,
Mar 15, 2009, 2:33:01 PM3/15/09
to
I upgraded my video card from an EVGA GeForce 7300Gt 512mb to a Gigabyte HD.
Radeon 4670 512mb DDR3. The upgrade and installation of the new card went
flawlessly. What I did however notice was that when I run DirectX diagnostics
with the new ATI card I end up with these results:


All of the sound, music, input etc...tests passed. Only the Direct draw and
D3D 7, 8 and 9 test results show failure. When I run the bouncing ball full
screen test the monitor goes black and says 'No video signal'. A few seconds
later windows reappears with the dialog box asking 'Did you see the bouncing
ball full screen. I select no. The same results occur when I try to run the
tests for the spinning DirectX logos for 7, 8 and 9. All other tests pass.

------------------
System Information
------------------
Time of this report: 3/13/2009, 17:45:10
Machine name: YOUR-4DACD0EA75
Operating System: Windows XP Professional (5.1, Build 2600) Service Pack
3 (2600.xpsp_sp3_gdr.080814-1236)
Language: English (Regional Setting: English)
System Manufacturer: HP Pavilion 061
System Model: EL412AA-ABA M7367C
BIOS: Phoenix - AwardBIOS v6.00PG
Processor: Intel(R) Pentium(R) D CPU 3.00GHz (2 CPUs)
Memory: 2046MB RAM
Page File: 366MB used, 4597MB available
Windows Dir: C:\WINDOWS
DirectX Version: DirectX 9.0c (4.09.0000.0904)
DX Setup Parameters: Not found
DxDiag Version: 5.03.2600.5512 32bit Unicode

------------
DxDiag Notes
------------
DirectX Files Tab: No problems found.
Display Tab 1: No problems found. DirectDraw test results: Failure at
step 7 (User verification of fullscreen bouncing): HRESULT = 0x00000000
(error code) Direct3D 7 test results: Failure at step 32 (User verification
of Direct3D rendering): HRESULT = 0x00000000 (error code) Direct3D 8 test
results: Failure at step 32 (User verification of Direct3D rendering):
HRESULT = 0x00000000 (error code) Direct3D 9 test results: Failure at step 32
(User verification of Direct3D rendering): HRESULT = 0x00000000 (error code)
Sound Tab 1: No problems found.
Music Tab: No problems found.
Input Tab: No problems found.
Network Tab: No problems found.


I had no issues running the DirectX test prior to the upgrade of the video
adapter. Also I'm not having any issues with any programs or games. I have
currently installed FSX, IL2 Sturmovik 1946, Joint Ops, Wings over Vietnam,
LOMAC and Company of Heroes all of which run and look great. The following is
my system specs:

Windows XP Media Center 2005 Serv. Pack3 (fully updated incl DirectX 9.0c
Nov08)
HP m7367c Media Center
Thermaltake Purepower 430watt PSU (replaced the OEM PSU)
Pentium D 930 3.0Ghz
2GB RAM PC2 DDR2 5300 667ghz
Gigabyte HD Radeon 4670 512mb DDR3 (Catalyst driver version 9.2)most current
Sound Blaster Audigy SE (drivers are current)
Maxtor SATA-150 300GB HDD 7200rpm
DVD/CD-RW DL
DVD-ROM
Airlink101 wireless PCI card

udidwht

unread,
Mar 17, 2009, 3:53:00 PM3/17/09
to
Anyone out there have info regarding this issue?
0 new messages