measureit

Got an answer - https://gitlab.com/lalelunet/measureit/-/releases Just seems confusing with all the

Hi all, Please can someone help. For some reason this month and last month it only shows the data

Hi Thomas, Many thanks for your reply. No problem, I'll look at the log when it stops again. Kind

Hi, you can look into the log to see if there are exceptions / errors. cat /tmp/measureit.log or to

Ah, glad I asked. Much easier and it works! The only thing I had to do was go into the code and

Sorry for the late answer. google claims the mail from the list as spam… It seems you do not use a

:) https://gitlab.com/lalelunet/measureit/-/releases/ Michael Suissa schrieb am Donnerstag, 4.

Which error message do you get? Warren schrieb am Samstag, 19. Dezember 2020 um 08:02:47 UTC+1: Hi I

I was able to install the 121 release from this page https://gitlab.com/lalelunet/measureit/-/

Hello, i just succeed to install measureit on my OrangePi, In Home tab i have the sensor displaying

Thanks again Thomas :) I'm hoping to experiment with that and see what happens. Unusually under

Hi, Just letting you know that I reinstalled the measureit image file onto a new micro SD card, and

:) I like your project. This is really nice. The TV status view is cool Measureit is dead because of

Hi Thomas, Thanks for the quick reply. I must have missed the info about where the system ID was on

https://forum.pvoutput.org/t/guide-for-currentcost-envir-on-pi-with-pvoutput-intergration-service/871

:) Nice to hear that everything is working. Am Samstag, 13. Oktober 2018 13:10:48 UTC+2 schrieb

It seems that this is a problem with the network. What is your IP, Gateway, Netmask you have at your

Hi all, I wasn't able to expand the cost data to show the years and month data of usage so

Hi Mick, you are right. The main sensor shows the sum of all clamps. If you want to have separate

PVoutput used to use Weather Underground api to get local weather station info for its graphs. But

If you have multiple clamps you can submit each clamp as a single sensor to PVOutput. https://gitlab.

I wanted to become root so i could log into Measureit via WINSCP and be able to change the files

Thanks both. On Fri, 3 Aug 2018, 15:01 Rob E, <robma...@gmail.com> wrote: Hi, I've had to

Hi, Here you go. Remove the rubber feet, remove 5 screws. No need to remove the board. From:

I don't know if this helps at all but when I ran the developer console in Chrome and clicked on

You had to be root to connect to mysql. Try first: sudo bash Am Donnerstag, 5. April 2018 07:56:55

Hi, Thanks for your thoughts on this. That's really helpful :) Best regards, Pravin On Monday, 2

thanks for your assistance anyway Thomas, at least we tried.. I have ordered a EnviR unit which I

Reg, my Rpi is connected to the router by cable and I assigned it a static address, so I can't

Hi, I will take a look when I am back from holidays end of next week :) Maybe the effort is not so