Basic SF43 Settings for Mosaic
	By Rick Pollack  - Oct 6 2011 - 5 new of 5 messages

	Sprinter for Mosaic
	This Sprinter is from the end of August but the configuration.h file can be used to get the configuration values for later Sprinter versions. By Rick Pollack  - Oct 6 2011 - 1 new of 1 message

	Sprinter For Prusa
	This version is configured to work with Pronterface. Comment out: Serial.println("start"); in the setup function in sprinter.pde to work with repsnapper for windows. By Rick Pollack  - Oct 27 2011 - 3 new of 3 messages

Slic3r settings for Mosaic

For those that have requested them, below is my config.ini. (One of the nice things about Slic3r is that there is so little to configure!) Now, I'm not saying it's the be-all end-all, drop Skeinforge/SFACT and run, but it does work really well in some situations, and Sound (on IRC) is very good about taking bug reports on github and addressing... more » By Richard Goodwin (rgoodwin on IRC)  - Nov 16 2011 - 26 new of 26 messages

	Getting Started Guide
	This was recently written and I have not even proofed it yet but it may still be helpful. Please post your comments. I'll be moving it to the MG website. Thank you Marcus!! By Rick Pollack  - Dec 5 2011 - 5 new of 5 messages

	Marlin 1.0 beta 1 and configuration.h for Mosaic (from me, not MG officially)
	May need Arduino 22 (vs 1.0) to compile, not sure. Downloaded the Marlin 1.0 beta 1 zip file from: [link] Applied my own config changes for Mosaic (minus enabling SD support), and including my configuration.h. You can either replace the one in the zip with mine, or open them side by side and change what you want :)... more » By Richard Goodwin  - Dec 28 2011 - 14 new of 14 messages

First Print - How To

Step 1: Manual Extrusion Terms: Hot-end - where the filament is melted (black insulator to the nozzle) Filament drive - contains the drive pulley and tensioning mechanism. The filament drive grips the plastic filament and forces the plastic through the hot-end (aka extrudes the plastic) Extruder - combination of hot-end, filament drive and stepper motor... more » By Rick Pollack  - Dec 30 2011 - 6 new of 6 messages

	Marlin for Mosaic
	marlin configured for mosaic. this is an older version of marlin but it has worked reliably. once you are comfortable with 3D printing you can upgrade or just wait for us to post a newer version. rick By Rick Pollack  - Apr 2 2012 - 15 new of 15 messages

	Sprinter for Prusa (5:1)
	This is Sprinter configured for a Prusa with a 5:1 extruder motor. By Rick Pollack  - Jun 2 2012 - 5 new of 5 messages

	Filament MSDS Files
	Attached are the MSDS files for the PLA and ABS we ship. This filament is extruded in NE Ohio from these resins. Thanks, Rick By Rick Pollack  - Nov 27 2012 - 1 new of 1 message

	First time I've seen an M2 on ebay
	[link] By mathisyourfriend  - May 18 - 1 new of 1 message

	M2 test prints with surface problems - G-code error?
	I'm a newbie with M2 and just got my first test prints - braslet, head, etc The braslet look good, but head have some perfect regions (as on 3.jpg) and some with surface problems (1,2 images). Please help to fix it. Bad G-code? By Ivan  - May 18 - 1 new of 1 message

	How to calibrate mendel prusa reprap.
	Alright guys im a student at garland county east and we need help re calibrating out reprap , i don't know how to calibrate so you may have to do a walk through of it with me. By bryce lucas  - May 17 - 1 new of 1 message

	Chamber for ABS Printing
	<[link]> I had curling with ABS regardless of how much hairspray I used. One of my guys here at the office fabbed this up for me with aluminum extrusions and acrylic. It's working perfectly now. Plate is at 105 and no detectable... more » By SMT Guy Austin, Texas  - May 17 - 7 new of 7 messages

	Heated Bed Power control
	Hi, I may seem to be slightly obsessive about the temperature control on the M2 heated bed but I come from a background of high performance controllers and electronics systems. Anyway, I thought the temperature control was PID but having tested my Rambo board it is a straightforward on/off controller with a huge... more » By Richard Holder  - May 17 - 7 new of 7 messages

	prusa bed problem
	I'had finished to assembly a prusa and I had two problem the first it's the max temperature of the bed is 77 celsius I try to set higher but nothing.then the plastic don't stick easy to the bed. The second problem it's related to the extruder: sometimes it dont pull the filament... I must push with the hand to restart to extrude... more » By grimforge  - May 17 - 1 new of 1 message

	Over-cured ceramic on HeatCore?
	Hi, I'm sorry for posting such a silly question but I feel pretty lost about how this is supposed to work. I am building the HeatCore for a MakerGear Prusa Mendel. I finished the step of adding the ceramic around the core to cover the wires and let it sit overnight ... only that I couldn't get back to it on the next day or... more » By Julian Cerruti  - May 15 - 5 new of 5 messages

M2 Bed heater power

Hi, I have tried printing ABS and started with a bed temperature of 100C. We are in the middle (almost) of the English Summer so the room where the M2 lives was a sultry 13C and it took 45 minutes to reach 100C and the ABS did not stick to the bed (Hair lacquer technique). Reading the forums there are posts suggesting that 108C works well so I upped the bed... more » By Richard Holder  - May 15 - 7 new of 7 messages

	Any M2 users in SF Bay Area ?
	Hi, I am waiting for my M2 and would like to connect with local M2 users. Is there anyone in San Francisco Bay Area ? By Yozhig  - May 15 - 1 new of 1 message

	Bought the M2, waiting for delivery - SF Bay Area. Any users here ?
	Hi, While I am waiting for my new black M2, would like to connect to users from the area - have some thoughts it may be not very straightforward to start working right away without any previous experience.. Anybody in SFBA ?? Thanks :) By Yozhig  - May 15 - 1 new of 1 message