Account Options

  1. Sign in
The old Google Groups will be going away soon, but your browser is incompatible with the new version.
Google Groups Home
« Groups Home
MakerGear - Make Today, Change Tomorrow
Home
+ new post
About this group
Join this group
Message from discussion Marlin RC2 configured for Mosaic (and tested*)
The group you are posting to is a Usenet group. Messages posted to this group will make your email address visible to anyone on the Internet.
Your reply message has not been sent.
Your post was successful
 
From:
To:
Cc:
Followup To:
Add Cc | Add Followup-to | Edit Subject
Subject:
Validation:
For verification purposes please type the characters you see in the picture below or the numbers you hear by clicking the accessibility icon. Listen and type the numbers you hear
 
Richard Goodwin (rgoodwin on IRC)  
View profile  
 More options Mar 2 2012, 3:08 pm
From: "Richard Goodwin (rgoodwin on IRC)" <richa...@richardgoodwin.com>
Date: Fri, 2 Mar 2012 12:08:03 -0800 (PST)
Local: Fri, Mar 2 2012 3:08 pm
Subject: Re: Marlin RC2 configured for Mosaic (and tested*)
Print | View thread | Show original | Report this message | Find messages by this author
Hey Billy,

I just went with the RC2 build as it was a known quantity. As far as
Arduino, not sure, but on my Win7 machine here it works on 022 but not
1.0. I didn't bother with 023 since it works on 22 :) But that can
certainly vary by platform, etc.

You shouldn't have to modify pins.h as of RC2 when he fixed a bug that
had the fan on the wrong pin. Configuration.h you absolutely must
change, and of course you can just use mine as a guide if nothing
else. I always open the previous version and new version configs side
by side and compare/transfer where needed just to be safe (in case
format/arguments were changed for example).

On Mar 2, 10:38 am, Max Inux <maxi...@gmail.com> wrote:

> Hi Rich,

>   I use Marlin current from github using Arduino 1.0 and some other Mosaic users are using it as well so it does work in Arduino 1.0 (at minimum use 23) (PDE get's renamed INO). For anyone curious the two files that should be different from distributed are pins.h and configuration.h.. I will have to take a look at rich's and see if ours are different..

> Billy

> On Mar 1, 2012, at 12:25 , Richard Goodwin wrote:

> > *DISCLAIMER AS USUAL:
> > This works for ME on my printer. It SHOULD work on your Mosaic just fine, but there may be things you want to tweak (if you are familiar with them) or change (if something doesn't work) in your configuration files.

> >  The only thing I believe may truly vary is the INVERT_Y_DIR, because I may or may not have mine setup wrong :) Simple test: if Y+ or Y- sends the bed in the wrong direction, then reverse it!

> > USAGE:
> > Extract, use Arduino 22 (or maybe 1.0, though I had issues) to open Marlin.pde, and Upload to your Arduino. Verify the config files first if you want to be extra extra safe.

> > <Marlin_RC2_for_Mosaic_tested.zip>


 
You must Sign in before you can post messages.
To post a message you must first join this group.
Please update your nickname on the subscription settings page before posting.
You do not have the permission required to post.
Create a group - Google Groups - Google Home - Terms of Service - Privacy Policy
©2013 Google