M2 Sample Prints

[Rick Pollack]

FYI - if you are waiting for an M2 or have just received one, there are ready to print models on the sd-card. Please print at least one of these to insure your machine is working properly. The Sasquatch is always a fine choice.

Rick

[Ross Mosshart]

What a Sasquatch may look like.

[Jordan Miller]

now i've gotta see pics of these. what is this sasquatch?? has anyone actually photographed it?

jordan

[Rick Pollack]

it roams just east of us!
http://www.huffingtonpost.com/2012/08/23/bigfoot-encounter-in-ohio_n_1824633.html

--
Rick Pollack
MakerGear
23632 Mercantile Rd.
Unit D-Rear
Beachwood, OH 44122

[Jay Couture]

Specs (layer height, feed, material used, travel speed, and print time) please.

[Ross Mosshart]

PLA is the material I used (which, <3 for shipping it with that!). All the rest of that wizardry is whatever Rick has it set to when he generated the files.

[Joshua Wills]

Jay - the basic information is in the .g file, which you can download and print your own, and is at http://makergear.wikidot.com/m2-sample-prints .  The full sample profile.ini will be posted on the wiki soon.

[Jay Couture]

Is there a link to the gcode file?

[Joshua Wills]

http://makergear.wikidot.com/m2-sample-prints

[Jay Couture]

; layer_height = 0.2
; perimeters = 3
; solid_layers = 3
; fill_density = 0.2
; nozzle_diameter = 0.35
; filament_diameter = 1.75
; extrusion_multiplier = 1
; perimeter_speed = 70
; infill_speed = 90
; travel_speed = 300
; extrusion_width_ratio = 0
; scale = 1
; single wall width = 0.49mm

A really clean print and using a sane 0.2mm layer height. Is the M2 using Sprinter or Marlin?

And Ross what does this mean? "(which, <3 for shipping it with that!)"

-Jay

[Joshua Wills]

http://makergear.wikidot.com/m2-firmware

He means that he is happy, because we shipped a spool of PLA with his M2.

[Ross Mosshart]

It means I prefer PLA over other available plastics.

[Jay Couture]

Thanks Joshua, we were typing at the same time previously :)