> "

> Arduino Libraries

> We have written a few libraries to enable extra functionality such as our
> packet system and SD card reading/writing. You will need these libraries in
> order to compile and upload the firmwares. This is very simple to
> accomplish. Just copy the folders in the libraries/ directory into the
> hardware/libraries/ folder contained in the Arduino software.

> To rephrase: Copy reprap-r3g-firmware-1.x/libraries/* to
> arduino-00xx/hardware/libraries/"

> On Tue, Aug 18, 2009 at 12:31 PM, Adam Mayer <pho...@gmail.com> wrote:

>> The instructions are up on the reprap wiki:
>> http://reprap.org/bin/view/Main/Generation3Firmware

>> It looks like you missed the step where you copy the libraries over to
>> the arduino installation.

>> -a

>> On Tue, Aug 18, 2009 at 1:25 PM, Conrad2468<robot.lig...@gmail.com> wrote:

>> > Can somebody give me (and everyone else who needs it) a step by step
>> > on how to install the firmware?
>> > I unzipped it and put the files into the correct spot in the arduino
>> > 15 software...there are tons of different files that open up along
>> > with the program i click on in the tabs!!....when i click upload, it
>> > gives me the error....

>> > "26: error: SimplePacket.h: No such file or directory In function
>> > 'void check_tool_version(byte)':
>> >  In function 'void get_tool_temp(byte)':
>> >  In function 'void set_tool_temp(byte, unsigned int)':
>> >  In function 'void set_motor1_pwm(byte, byte)':
>> >  In function 'void set_motor2_pwm(byte, byte)':
>> >  In function 'void toggle_motor1(byte, boolean, boolean)':
>> >  In function 'void toggle_motor2(byte, boolean, boolean)':
>> >  In function 'void toggle_fan(byte, boolean)':
>> >  In function 'void toggle_valve(byte, boolean)':
>> >  In function 'void get_motor1_pwm(byte)':
>> >  In function 'void get_motor2_pwm(byte)':
>> >  In function 'void set_servo1_position(byte, byte)':
>> >  In function 'void set_servo2_position(byte, byte)':
>> >  In function 'void get_filament_status(byte)':
>> >  In function 'void process_host_packets()':
>> >  In function 'void handle_query(byte)':
>> >  In function 'void handle_commands()':
>> >  In function 'bool ping_tool(byte)':
>> >  In function 'void init_tool(byte)':
>> >  In function 'void select_tool(byte)':
>> >  In function 'bool is_tool_ready(byte)':
>> >  In function 'void send_tool_query()':
>> >  In function 'void send_tool_command(CircularBuffer::Cursor&)':
>> >  In function 'void send_tool_simple_command(byte, byte)':
>> >  In function 'boolean send_packet()':
>> >  In function 'bool read_tool_response(int)':"
>> > can anyone help? I feel so close to completion!

> --
> 50 12'48.28" N  8 52'08.17" E
> elevation 489 ft