Doesnt look like a 23 hour print to me (compared to similar sized prints I have done) but it really depends on your speeds, layer heights, and infill...
On Sunday, September 23, 2012 1:30:49 PM UTC+9, Claydiz wrote: > So I have never messed with the rep-g settings but when I went to estimate > the time for *http://www.thingiverse.com/thing:30166*<http://www.thingiverse.com/thing:30166>it said 23 hours. Is everyone else who printed it taking 23 hours or did > they speed it up?
23 hours is hard to imagine. Also, looking at the model, it does not look like you need very much detail, so you should be able to run a print at lower resolution to get it even faster.
1. what adhesive did you use to attach the magnets?
2. I look forward to the day when brushed stainless fridge doors will go
out of style. Boo, I say, boo to non-magnetic fridge doors! Just checked
with my fridge's co-owner, she says I'm not allowed to attach a powder
coated magnetically susceptible steel plate to the outside of our fridge.
Bummer!
On Sun, Sep 23, 2012 at 9:39 AM, Laird Popkin <la...@popk.in> wrote:
> I printed it - perhaps 14 hours, with acceleration. It's a big print -
> fills the Replicator print area! But very cool to have on the fridge.
> --
> You received this message because you are subscribed to the Google Groups
> "MakerBot Operators" group.
> To view this discussion on the web visit
> https://groups.google.com/d/msg/makerbot/-/VcsPpa1Y0U8J.
> To post to this group, send email to makerbot@googlegroups.com.
> To unsubscribe from this group, send email to
> makerbot+unsubscribe@googlegroups.com.
> For more options, visit this group at
> http://groups.google.com/group/makerbot?hl=en.
On Sun, Sep 23, 2012 at 12:15 PM, RocketSled <rscohen...@gmail.com> wrote:
> Suggest you're considering using sheet metal screws as an alternative.
> That might change her mind...
> To post to this group, send email to makerbot@googlegroups.com.
> To unsubscribe from this group, send email to
> makerbot+unsubscribe@googlegroups.com.
> For more options, visit this group at
> http://groups.google.com/group/makerbot?hl=en.
Most stainless refrigerator manufacturers either use a stainless that is magnetic or back it with a sheet of CR steel so magnets work. Not all but most. And almost no "professional" versions, just the ones for homes.
On Sunday, September 23, 2012 8:47:48 AM UTC-5, AdanA wrote:
> 1. what adhesive did you use to attach the magnets?
> 2. I look forward to the day when brushed stainless fridge doors will go > out of style. Boo, I say, boo to non-magnetic fridge doors! Just checked > with my fridge's co-owner, she says I'm not allowed to attach a powder > coated magnetically susceptible steel plate to the outside of our fridge. > Bummer!
> On Sun, Sep 23, 2012 at 9:39 AM, Laird Popkin <la...@popk.in <javascript:> > > wrote:
>> I printed it - perhaps 14 hours, with acceleration. It's a big print - >> fills the Replicator print area! But very cool to have on the fridge.
>> -- >> You received this message because you are subscribed to the Google Groups >> "MakerBot Operators" group. >> To view this discussion on the web visit >> https://groups.google.com/d/msg/makerbot/-/VcsPpa1Y0U8J. >> To post to this group, send email to make...@googlegroups.com<javascript:> >> . >> To unsubscribe from this group, send email to >> makerbot+u...@googlegroups.com <javascript:>. >> For more options, visit this group at >> http://groups.google.com/group/makerbot?hl=en.
Oh man, I'll feel dumb if I've just incorrectly assumed all this time it's
not magnetically susceptible... But I must have tested it. I always carry a
neodymium magnet around in my pocket; it's fun to test things. ZoeTheCat?
Not magnetic, mostly.
On Monday, September 24, 2012, GregY wrote:
> Most stainless refrigerator manufacturers either use a stainless that is
> magnetic or back it with a sheet of CR steel so magnets work. Not all but
> most. And almost no "professional" versions, just the ones for homes.
> Greg
> On Sunday, September 23, 2012 8:47:48 AM UTC-5, AdanA wrote:
>> 1. what adhesive did you use to attach the magnets?
>> 2. I look forward to the day when brushed stainless fridge doors will go
>> out of style. Boo, I say, boo to non-magnetic fridge doors! Just checked
>> with my fridge's co-owner, she says I'm not allowed to attach a powder
>> coated magnetically susceptible steel plate to the outside of our fridge.
>> Bummer!
>> On Sun, Sep 23, 2012 at 9:39 AM, Laird Popkin <la...@popk.in> wrote:
>>> I printed it - perhaps 14 hours, with acceleration. It's a big print -
>>> fills the Replicator print area! But very cool to have on the fridge.
>> --
> You received this message because you are subscribed to the Google Groups
> "MakerBot Operators" group.
> To view this discussion on the web visit
> https://groups.google.com/d/msg/makerbot/-/6zYUlCvcBzIJ.
> To post to this group, send email to makerbot@googlegroups.com<javascript:_e({}, 'cvml', 'makerbot@googlegroups.com');>
> .
> To unsubscribe from this group, send email to
> makerbot+unsubscribe@googlegroups.com <javascript:_e({}, 'cvml',
> 'makerbot%2Bunsubscribe@googlegroups.com');>.
> For more options, visit this group at
> http://groups.google.com/group/makerbot?hl=en.
Not all types of stainless steel are non-magnetic, as well. You've probably tested your fridge by now, but as a general rule don't assume that stainless steel isn't magnetic.
On Monday, September 24, 2012 2:08:02 PM UTC-5, AdanA wrote:
> Oh man, I'll feel dumb if I've just incorrectly assumed all this time it's > not magnetically susceptible... But I must have tested it. I always carry a > neodymium magnet around in my pocket; it's fun to test things. ZoeTheCat? > Not magnetic, mostly.
> On Monday, September 24, 2012, GregY wrote:
>> Most stainless refrigerator manufacturers either use a stainless that is >> magnetic or back it with a sheet of CR steel so magnets work. Not all but >> most. And almost no "professional" versions, just the ones for homes.
>> Greg
>> On Sunday, September 23, 2012 8:47:48 AM UTC-5, AdanA wrote:
>>> 1. what adhesive did you use to attach the magnets?
>>> 2. I look forward to the day when brushed stainless fridge doors will go >>> out of style. Boo, I say, boo to non-magnetic fridge doors! Just checked >>> with my fridge's co-owner, she says I'm not allowed to attach a powder >>> coated magnetically susceptible steel plate to the outside of our fridge. >>> Bummer!
>>> On Sun, Sep 23, 2012 at 9:39 AM, Laird Popkin <la...@popk.in> wrote:
>>>> I printed it - perhaps 14 hours, with acceleration. It's a big print - >>>> fills the Replicator print area! But very cool to have on the fridge.
>>> -- >> You received this message because you are subscribed to the Google Groups >> "MakerBot Operators" group. >> To view this discussion on the web visit >> https://groups.google.com/d/msg/makerbot/-/6zYUlCvcBzIJ. >> To post to this group, send email to makerbot@googlegroups.com. >> To unsubscribe from this group, send email to >> makerbot+unsubscribe@googlegroups.com. >> For more options, visit this group at >> http://groups.google.com/group/makerbot?hl=en.
