--
You received this message because you are subscribed to the Google Groups "MakerBot Operators" group.
To post to this group, send email to make...@googlegroups.com.
To unsubscribe from this group, send email to makerbot+u...@googlegroups.com.
For more options, visit this group at http://groups.google.com/group/makerbot?hl=en.
On Dec 16, 9:30 pm, Todd Fleming <tbflem...@gmail.com> wrote:
> Or, I should say, there are only 4 U-shaped brackets for the build platform
> and 4 non-u-shaped for the top of the machine.
>
> Todd
>
> On Wed, Dec 16, 2009 at 10:29 PM, Todd Fleming <tbflem...@gmail.com> wrote:
> > A coworker of mine also just received one without the endstop cards. There
> > are only 4 Z brackets; the wiki is misleading.
>
> > Todd
>
> > On Wed, Dec 16, 2009 at 10:22 PM, beverageexpert <beermake...@gmail.com>wrote:
>
> >> anybody else have any parts missing in batch 9? All the endstops and 4
> >> of the 8 lasercut z brackets were not in my box. I sent a few emails
> >> yesterday and today and have not received any response yet so I figure
> >> I'd post something here. Its killing me that I have been waiting so
> >> long and dont know when I will ever get the rest of my makerbot. Sorry
> >> my 1st post is not something positive. I am really glad that there is
> >> a good group of people here to get me through my makerbot build.
> >> Anybody have any tips for when I get the rest of my parts and can
> >> start building my bot?
> >> So far I have seen a few posts on doing a heated build platform. I
> >> have a peltier tec and would like to know the optimal temp I should be
> >> aiming for. Anybody know?
> >> thanks
> >> Bryan
>
> >> --
>
> >> You received this message because you are subscribed to the Google Groups
> >> "MakerBot Operators" group.
> >> To post to this group, send email to make...@googlegroups.com.
> >> To unsubscribe from this group, send email to
> >> makerbot+u...@googlegroups.com<makerbot%2Bunsu...@googlegroups.com>
Got to love the growing pains of a new company :) Trust me they will
make everything right.
--
You received this message because you are subscribed to the Google Groups "MakerBot Operators" group.
To post to this group, send email to make...@googlegroups.com.
To unsubscribe from this group, send email to makerbot+u...@googlegroups.com.
Im so glad to see makerbot doing so well. I have to mention that you
have been a great inspiration to me. The build your own pcb vid that
you did made me jump for joy. I didnt know that tech was accessible to
me. Well thanks for the reply and good luck with your company
bryan
On Dec 17, 1:29 am, bre pettis <brepet...@gmail.com> wrote:
> Cool, so all good with the brackets and endstops needed, yes?
>
> Bre
>
> http://brepettis.comhttp://makerbot.com
> > makerbot+u...@googlegroups.com<makerbot%2Bunsu...@googlegroups.com>
What's a PITA?
On Dec 17, 2009 7:22 AM, "beverageexpert" <beerm...@gmail.com> wrote:
I was wondering why the adafruit kit was in there. Is it needed for
anything? I was going to buy 1 anyway but ended up going with the
sparkfun 1 based on the same design. Now I have 2 tinyusb avr
programmers. Sweet. After going through about 200 of the posts on this
forum I did see that the x and y endstops aren't really needed but
most would use the z axis ones. I forgot what post it was but somebody
said it was a PITA to install them after he built it. My day off is
tomorrow and I had planned on building my bot but would like a little
more info before I put it together and find the z axis endstops are a
PITA. I think im going to do my painting tomorrow and do the build on
sunday. Thanks for all the responses I am glad to know I am not the
only 1to have the endstops missing. I have been pulling my hair out
thinking it could be weeks for me to get my 1000 investment up and
running. The 23 days I have been waiting so far are about to be my
ending. I know that they will make things right and can't wait for the
next model and improvements to trickle down to us.
thanks
Bryan
On Dec 16, 11:37 pm, Tony Buser <tbu...@gmail.com> wrote: > Yeah my batch 9 order was missing the e...
--
You received this message because you are subscribed to the Google Groups "MakerBot Operators" group.
To post to this group, send email to make...@googlegroups.com.
To unsubscribe from this group, send email to makerbot+u...@googlegroups.com.
> --
>
> You received this message because you are subscribed to the Google
> Groups "MakerBot Operators" group.
> To post to this group, send email to make...@googlegroups.com.
> To unsubscribe from this group, send email to
> makerbot+u...@googlegroups.com.
> For more options, visit this group at
> http://groups.google.com/group/makerbot?hl=en.
--
J. E. 'jet' Townsend, IDSA
Design, Fabrication, Hacking
design: www.allartburns.org; hacking: www.flatline.net; HF: KG6ZVQ
PGP: 0xD0D8C2E8 AC9B 0A23 C61A 1B4A 27C5 F799 A681 3C11 D0D8 C2E8
On Thursday, December 17, 2009, Cathal Garvey <cathal...@gmail.com> wrote:
> Are the printable ones not as effective? :-/
>
> 2009/12/17 jet <allar...@gmail.com <javascript:_e({}, 'cvml', 'allar...@gmail.com');>>
>
> I do wish I had good z-brackets, however. I'm really tired of
> re-leveling the z platform.
>
>
>
> Cathal Garvey wrote:
>> Haha, right!
>> Well, I've been printing all this time without endstops. If the 'bot
>> freaks out and starts bashing the walls, I just reset it.
>>
>> --
>>
>> You received this message because you are subscribed to the Google
>> Groups "MakerBot Operators" group.
>> To post to this group, send email to make...@googlegroups.com <javascript:_e({}, 'cvml', 'make...@googlegroups.com');>.
>> To unsubscribe from this group, send email to
>> makerbot+u...@googlegroups.com.
>> For more options, visit this group at
>> http://groups.google.com/group/makerbot?hl=en.
>
>
> --
> J. E. 'jet' Townsend, IDSA
> Design, Fabrication, Hacking
> design: www.allartburns.org; hacking: www.flatline.net; HF: KG6ZVQ
> PGP: 0xD0D8C2E8 AC9B 0A23 C61A 1B4A 27C5 F799 A681 3C11 D0D8 C2E8
>
> --
>
> You received this message because you are subscribed to the Google Groups "MakerBot Operators" group.
> To post to this group, send email to make...@googlegroups.com <javascript:_e({}, 'cvml', 'make...@googlegroups.com');>.
> To unsubscribe from this group, send email to makerbot+u...@googlegroups.com.
> For more options, visit this group at http://groups.google.com/group/makerbot?hl=en.
>
>
>
>
> --
> letters.cunningprojects.com
> twitter.com/onetruecathal
>
>
> --
>
> You received this message because you are subscribed to the Google Groups "MakerBot Operators" group.
> To post to this group, send email to make...@googlegroups.com <javascript:_e({}, 'cvml', 'make...@googlegroups.com');>.
> To unsubscribe from this group, send email to makerbot+u...@googlegroups.com.
> For more options, visit this group at http://groups.google.com/group/makerbot?hl=en.
>
--
Scott Small
Cathal Garvey wrote:
> Are the printable ones not as effective? :-/
>
> 2009/12/17 jet <allar...@gmail.com <mailto:allar...@gmail.com>>
>
> I do wish I had good z-brackets, however. I'm really tired of
> re-leveling the z platform.
>
>
>
> Cathal Garvey wrote:
> > Haha, right!
> > Well, I've been printing all this time without endstops. If the 'bot
> > freaks out and starts bashing the walls, I just reset it.
> >
> > --
> >
> > You received this message because you are subscribed to the Google
> > Groups "MakerBot Operators" group.
> > To post to this group, send email to make...@googlegroups.com
> <mailto:make...@googlegroups.com>.
> > To unsubscribe from this group, send email to
> > makerbot+u...@googlegroups.com
> <mailto:makerbot%2Bunsu...@googlegroups.com>.
> > For more options, visit this group at
> > http://groups.google.com/group/makerbot?hl=en.
>
>
> --
> J. E. 'jet' Townsend, IDSA
> Design, Fabrication, Hacking
> design: www.allartburns.org <http://www.allartburns.org>; hacking:
> www.flatline.net <http://www.flatline.net>; HF: KG6ZVQ
> PGP: 0xD0D8C2E8 AC9B 0A23 C61A 1B4A 27C5 F799 A681 3C11 D0D8 C2E8
>
> --
>
> You received this message because you are subscribed to the Google
> Groups "MakerBot Operators" group.
> To post to this group, send email to make...@googlegroups.com
> <mailto:make...@googlegroups.com>.
> To unsubscribe from this group, send email to
> makerbot+u...@googlegroups.com
> <mailto:makerbot%2Bunsu...@googlegroups.com>.
> For more options, visit this group at
> http://groups.google.com/group/makerbot?hl=en.
>
>
>
>
>
> --
> letters.cunningprojects.com <http://letters.cunningprojects.com>
> twitter.com/onetruecathal <http://twitter.com/onetruecathal>
On Dec 17, 3:38 pm, John <gratton.j...@gmail.com> wrote:
> Yeah, i'mmissingmy end stops too. I've just sent Makerbot an email
> to let them know.