Google Groups no longer supports new Usenet posts or subscriptions. Historical content remains viewable.
Dismiss

USB3 and a Seagate FA GoFlex

36 views
Skip to first unread message

Sam Fourman Jr.

unread,
Feb 9, 2012, 7:22:53 PM2/9/12
to
hello list,

I bought a new Seagate FA GoFlex USB3 removable disk running FreeBSD 10.x
CURRENT this disk functions correctly on a USB 2.0 port (I can use zpool
create to create a ZFS pool)
however when attached to a USB 3.0 port it does not function correctly when
attempting to create a zpool i get

*AutoSense failed*

this happens across 3 separate computers all running FreeBSD while booting
from a usb stick attached to da0 i enabled USB_DEBUG in the kernel

any ideas?

Feb 9 18:12:28 kernel: uhub_read_port_status: port 2, wPortStatus=0x0100,
wPortChange=0x0000, err=USB_ERR_NORMAL_COMPLETION
Feb 9 18:12:28 kernel: uhub_read_port_status: port 3, wPortStatus=0x0100,
wPortChange=0x0000, err=USB_ERR_NORMAL_COMPLETION
Feb 9 18:12:28 kernel: uhub_read_port_status: port 4, wPortStatus=0x0503,
wPortChange=0x0000, err=USB_ERR_NORMAL_COMPLETION
Feb 9 18:12:28 kernel: uhub_read_port_status: port 5, wPortStatus=0x0100,
wPortChange=0x0000, err=USB_ERR_NORMAL_COMPLETION
Feb 9 18:12:28 kernel: uhub_read_port_status: port 6, wPortStatus=0x0100,
wPortChange=0x0000, err=USB_ERR_NORMAL_COMPLETION
Feb 9 18:12:28 kernel: uhub_read_port_status: port 7, wPortStatus=0x0100,
wPortChange=0x0000, err=USB_ERR_NORMAL_COMPLETION
Feb 9 18:12:28 kernel: uhub_read_port_status: port 8, wPortStatus=0x0100,
wPortChange=0x0000, err=USB_ERR_NORMAL_COMPLETION
Feb 9 18:12:28 kernel: uhub_read_port_status: port 2, wPortStatus=0x0500,
wPortChange=0x0000, err=USB_ERR_NORMAL_COMPLETION
Feb 9 18:13:18 kernel: ugen1.2: <Seagate> at usbus1 (disconnected)
Feb 9 18:13:18 kernel: umass1: at uhub1, port 1, addr 1 (disconnected)
Feb 9 18:13:18 kernel: (da1:umass-sim1:1:0:0): lost device - 0
outstanding, 0 refs
Feb 9 18:13:18 kernel: (da1:umass-sim1:1:0:0): removing device entry
Feb 9 18:13:32 kernel: usb_needs_explore:
Feb 9 18:13:32 kernel: usb_bus_powerd: bus=0xffffff8001d90cd8
Feb 9 18:13:32 kernel: uhub_explore: udev=0xfffffe001ba93800 addr=1
Feb 9 18:13:32 kernel: uhub_read_port_status: port 1, wPortStatus=0x0503,
wPortChange=0x0000, err=USB_ERR_NORMAL_COMPLETION
Feb 9 18:13:32 kernel: uhub_explore: udev=0xfffffe001bb3c800 addr=2
Feb 9 18:13:32 kernel: uhub_read_port_status: port 1, wPortStatus=0x0100,
wPortChange=0x0000, err=USB_ERR_NORMAL_COMPLETION
Feb 9 18:13:32 kernel: uhub_read_port_status: port 2, wPortStatus=0x0503,
wPortChange=0x0000, err=USB_ERR_NORMAL_COMPLETION
Feb 9 18:13:32 kernel: uhub_read_port_status: port 3, wPortStatus=0x0100,
wPortChange=0x0000, err=USB_ERR_NORMAL_COMPLETION
Feb 9 18:13:32 kernel: uhub_read_port_status: port 4, wPortStatus=0x0100,
wPortChange=0x0000, err=USB_ERR_NORMAL_COMPLETION
Feb 9 18:13:32 kernel: uhub_read_port_status: port 5, wPortStatus=0x0103,
wPortChange=0x0000, err=USB_ERR_NORMAL_COMPLETION
Feb 9 18:13:32 kernel: uhub_read_port_status: port 6, wPortStatus=0x0100,
wPortChange=0x0000, err=USB_ERR_NORMAL_COMPLETION
Feb 9 18:13:32 kernel: uhub_read_port_status: port 2, wPortStatus=0x0500,
wPortChange=0x0000, err=USB_ERR_NORMAL_COMPLETION
Feb 9 18:13:32 kernel: usb_needs_explore:
Feb 9 18:13:32 kernel: usb_bus_powerd: bus=0xffffff8001e04cd8
Feb 9 18:13:32 kernel: usb_bus_powerd: Recomputing power masks
Feb 9 18:13:32 kernel: uhub_explore: udev=0xfffffe001bb3d000 addr=1
Feb 9 18:13:32 kernel: uhub_read_port_status: port 1, wPortStatus=0x0503,
wPortChange=0x0000, err=USB_ERR_NORMAL_COMPLETION
Feb 9 18:13:32 kernel: uhub_explore: udev=0xfffffe001bb3c000 addr=2
Feb 9 18:13:32 kernel: usbd_transfer_power_ref: Adding type 0 to power
state
Feb 9 18:13:32 kernel: usbd_transfer_power_ref: needs power
Feb 9 18:13:32 kernel: uhub_read_port_status: port 1, wPortStatus=0x0100,
wPortChange=0x0000, err=USB_ERR_NORMAL_COMPLETION
Feb 9 18:13:32 kernel: uhub_read_port_status: port 2, wPortStatus=0x0100,
wPortChange=0x0000, err=USB_ERR_NORMAL_COMPLETION
Feb 9 18:13:32 kernel: uhub_read_port_status: port 3, wPortStatus=0x0100,
wPortChange=0x0000, err=USB_ERR_NORMAL_COMPLETION
Feb 9 18:13:32 kernel: uhub_read_port_status: port 4, wPortStatus=0x0503,
wPortChange=0x0000, err=USB_ERR_NORMAL_COMPLETION
Feb 9 18:13:32 kernel: uhub_read_port_status: port 5, wPortStatus=0x0100,
wPortChange=0x0000, err=USB_ERR_NORMAL_COMPLETION
Feb 9 18:13:32 kernel: uhub_read_port_status: port 6, wPortStatus=0x0100,
wPortChange=0x0000, err=USB_ERR_NORMAL_COMPLETION
Feb 9 18:13:32 kernel: uhub_read_port_status: port 7, wPortStatus=0x0100,
wPortChange=0x0000, err=USB_ERR_NORMAL_COMPLETION
Feb 9 18:13:32 kernel: uhub_read_port_status: port 8, wPortStatus=0x0100,
wPortChange=0x0000, err=USB_ERR_NORMAL_COMPLETION
Feb 9 18:13:32 kernel: uhub_read_port_status: port 2, wPortStatus=0x0500,
wPortChange=0x0000, err=USB_ERR_NORMAL_COMPLETION
Feb 9 18:13:32 kernel: usbd_transfer_power_ref: Adding type 2 to power
state
Feb 9 18:13:32 kernel: usbd_transfer_power_ref: needs power
Feb 9 18:13:35 kernel: usb_needs_explore:
Feb 9 18:13:35 kernel: usb_bus_powerd: bus=0xffffff8001dfa170
Feb 9 18:13:35 kernel: usb_bus_powerd: Recomputing power masks
Feb 9 18:13:35 kernel: uhub_explore: udev=0xfffffe001ba93000 addr=1
Feb 9 18:13:35 kernel: uhub_read_port_status: port 1, wPortStatus=0x07a0,
wPortChange=0x0000, err=USB_ERR_NORMAL_COMPLETION
Feb 9 18:13:35 kernel: uhub_read_port_status: port 2, wPortStatus=0x07a0,
wPortChange=0x0000, err=USB_ERR_NORMAL_COMPLETION
Feb 9 18:13:36 kernel: usb_needs_explore:
Feb 9 18:13:36 kernel: usb_bus_powerd: bus=0xffffff8001d90cd8
Feb 9 18:13:36 kernel: uhub_explore: udev=0xfffffe001ba93800 addr=1
Feb 9 18:13:36 kernel: uhub_read_port_status: port 1, wPortStatus=0x0503,
wPortChange=0x0000, err=USB_ERR_NORMAL_COMPLETION
Feb 9 18:13:36 kernel: uhub_explore: udev=0xfffffe001bb3c800 addr=2
Feb 9 18:13:36 kernel: uhub_read_port_status: port 1, wPortStatus=0x0100,
wPortChange=0x0000, err=USB_ERR_NORMAL_COMPLETION
Feb 9 18:13:36 kernel: uhub_read_port_status: port 2, wPortStatus=0x0503,
wPortChange=0x0000, err=USB_ERR_NORMAL_COMPLETION
Feb 9 18:13:36 kernel: uhub_read_port_status: port 3, wPortStatus=0x0100,
wPortChange=0x0000, err=USB_ERR_NORMAL_COMPLETION
Feb 9 18:13:36 kernel: uhub_read_port_status: port 4, wPortStatus=0x0100,
wPortChange=0x0000, err=USB_ERR_NORMAL_COMPLETION
Feb 9 18:13:36 kernel: uhub_read_port_status: port 5, wPortStatus=0x0103,
wPortChange=0x0000, err=USB_ERR_NORMAL_COMPLETION
Feb 9 18:13:36 kernel: uhub_read_port_status: port 6, wPortStatus=0x0100,
wPortChange=0x0000, err=USB_ERR_NORMAL_COMPLETION
Feb 9 18:13:36 kernel: uhub_read_port_status: port 2, wPortStatus=0x0500,
wPortChange=0x0000, err=USB_ERR_NORMAL_COMPLETION
Feb 9 18:13:36 kernel: usb_needs_explore:
Feb 9 18:13:36 kernel: usb_bus_powerd: bus=0xffffff8001e04cd8
Feb 9 18:13:36 kernel: uhub_explore: udev=0xfffffe001bb3d000 addr=1
Feb 9 18:13:36 kernel: uhub_read_port_status: port 1, wPortStatus=0x0503,
wPortChange=0x0000, err=USB_ERR_NORMAL_COMPLETION
Feb 9 18:13:36 kernel: uhub_explore: udev=0xfffffe001bb3c000 addr=2
Feb 9 18:13:36 kernel: uhub_read_port_status: port 1, wPortStatus=0x0100,
wPortChange=0x0000, err=USB_ERR_NORMAL_COMPLETION
Feb 9 18:13:36 kernel: uhub_read_port_status: port 2, wPortStatus=0x0100,
wPortChange=0x0000, err=USB_ERR_NORMAL_COMPLETION
Feb 9 18:13:36 kernel: uhub_read_port_status: port 3, wPortStatus=0x0100,
wPortChange=0x0000, err=USB_ERR_NORMAL_COMPLETION
Feb 9 18:13:36 kernel: uhub_read_port_status: port 4, wPortStatus=0x0503,
wPortChange=0x0000, err=USB_ERR_NORMAL_COMPLETION
Feb 9 18:13:36 kernel: uhub_read_port_status: port 5, wPortStatus=0x0100,
wPortChange=0x0000, err=USB_ERR_NORMAL_COMPLETION
Feb 9 18:13:36 kernel: uhub_read_port_status: port 6, wPortStatus=0x0100,
wPortChange=0x0000, err=USB_ERR_NORMAL_COMPLETION
Feb 9 18:13:36 kernel: uhub_read_port_status: port 7, wPortStatus=0x0100,
wPortChange=0x0000, err=USB_ERR_NORMAL_COMPLETION
Feb 9 18:13:36 kernel: uhub_read_port_status: port 8, wPortStatus=0x0100,
wPortChange=0x0000, err=USB_ERR_NORMAL_COMPLETION
Feb 9 18:13:36 kernel: uhub_read_port_status: port 2, wPortStatus=0x0500,
wPortChange=0x0000, err=USB_ERR_NORMAL_COMPLETION
Feb 9 18:13:39 kernel: usb_needs_explore:
Feb 9 18:13:39 kernel: usb_bus_powerd: bus=0xffffff8001dfa170
Feb 9 18:13:39 kernel: usb_bus_powerd: Recomputing power masks
Feb 9 18:13:39 kernel: uhub_explore: udev=0xfffffe001ba93000 addr=1
Feb 9 18:13:39 kernel: uhub_read_port_status: port 1, wPortStatus=0x07a0,
wPortChange=0x0000, err=USB_ERR_NORMAL_COMPLETION
Feb 9 18:13:39 kernel: uhub_read_port_status: port 2, wPortStatus=0x07a0,
wPortChange=0x0000, err=USB_ERR_NORMAL_COMPLETION
Feb 9 18:13:39 kernel: usb_needs_explore:
Feb 9 18:13:39 kernel: usb_bus_powerd: bus=0xffffff8001dfa170
Feb 9 18:13:39 kernel: usb_bus_powerd: Recomputing power masks
Feb 9 18:13:39 kernel: uhub_explore: udev=0xfffffe001ba93000 addr=1
Feb 9 18:13:39 kernel: uhub_read_port_status: port 1, wPortStatus=0x0703,
wPortChange=0x0001, err=USB_ERR_NORMAL_COMPLETION
Feb 9 18:13:39 kernel: uhub_reattach_port: reattaching port 1
Feb 9 18:13:39 kernel: uhub_read_port_status: port 1, wPortStatus=0x0703,
wPortChange=0x0000, err=USB_ERR_NORMAL_COMPLETION
Feb 9 18:13:39 kernel: uhub_reattach_port: Port 1 is in Host Mode
Feb 9 18:13:39 kernel: usb_needs_explore:
Feb 9 18:13:39 kernel: uhub_read_port_status: port 1, wPortStatus=0x0703,
wPortChange=0x0000, err=USB_ERR_NORMAL_COMPLETION
Feb 9 18:13:39 kernel: usbd_transfer_power_ref: Adding type 0 to power
state
Feb 9 18:13:39 kernel: usbd_transfer_power_ref: needs power
Feb 9 18:13:40 kernel: usb_needs_explore:
Feb 9 18:13:40 kernel: usb_bus_powerd: bus=0xffffff8001d90cd8
Feb 9 18:13:40 kernel: uhub_explore: udev=0xfffffe001ba93800 addr=1
Feb 9 18:13:40 kernel: uhub_read_port_status: port 1, wPortStatus=0x0503,
wPortChange=0x0000, err=USB_ERR_NORMAL_COMPLETION
Feb 9 18:13:40 kernel: uhub_explore: udev=0xfffffe001bb3c800 addr=2
Feb 9 18:13:40 kernel: uhub_read_port_status: port 1, wPortStatus=0x0100,
wPortChange=0x0000, err=USB_ERR_NORMAL_COMPLETION
Feb 9 18:13:40 kernel: uhub_read_port_status: port 2, wPortStatus=0x0503,
wPortChange=0x0000, err=USB_ERR_NORMAL_COMPLETION
Feb 9 18:13:40 kernel: uhub_read_port_status: port 3, wPortStatus=0x0100,
wPortChange=0x0000, err=USB_ERR_NORMAL_COMPLETION
Feb 9 18:13:40 kernel: uhub_read_port_status: port 4, wPortStatus=0x0100,
wPortChange=0x0000, err=USB_ERR_NORMAL_COMPLETION
Feb 9 18:13:40 kernel: uhub_read_port_status: port 5, wPortStatus=0x0103,
wPortChange=0x0000, err=USB_ERR_NORMAL_COMPLETION
Feb 9 18:13:40 kernel: uhub_read_port_status: port 6, wPortStatus=0x0100,
wPortChange=0x0000, err=USB_ERR_NORMAL_COMPLETION
Feb 9 18:13:40 kernel: uhub_read_port_status: port 2, wPortStatus=0x0500,
wPortChange=0x0000, err=USB_ERR_NORMAL_COMPLETION
Feb 9 18:13:40 kernel: usb_needs_explore:
Feb 9 18:13:40 kernel: usb_bus_powerd: bus=0xffffff8001e04cd8
Feb 9 18:13:40 kernel: uhub_explore: udev=0xfffffe001bb3d000 addr=1
Feb 9 18:13:40 kernel: uhub_read_port_status: port 1, wPortStatus=0x0503,
wPortChange=0x0000, err=USB_ERR_NORMAL_COMPLETION
Feb 9 18:13:40 kernel: uhub_explore: udev=0xfffffe001bb3c000 addr=2
Feb 9 18:13:40 kernel: uhub_read_port_status: port 1, wPortStatus=0x0100,
wPortChange=0x0000, err=USB_ERR_NORMAL_COMPLETION
Feb 9 18:13:40 kernel: uhub_read_port_status: port 2, wPortStatus=0x0100,
wPortChange=0x0000, err=USB_ERR_NORMAL_COMPLETION
Feb 9 18:13:40 kernel: uhub_read_port_status: port 3, wPortStatus=0x0100,
wPortChange=0x0000, err=USB_ERR_NORMAL_COMPLETION
Feb 9 18:13:40 kernel: uhub_read_port_status: port 4, wPortStatus=0x0503,
wPortChange=0x0000, err=USB_ERR_NORMAL_COMPLETION
Feb 9 18:13:40 kernel: uhub_read_port_status: port 5, wPortStatus=0x0100,
wPortChange=0x0000, err=USB_ERR_NORMAL_COMPLETION
Feb 9 18:13:40 kernel: uhub_read_port_status: port 6, wPortStatus=0x0100,
wPortChange=0x0000, err=USB_ERR_NORMAL_COMPLETION
Feb 9 18:13:40 kernel: uhub_read_port_status: port 7, wPortStatus=0x0100,
wPortChange=0x0000, err=USB_ERR_NORMAL_COMPLETION
Feb 9 18:13:40 kernel: uhub_read_port_status: port 8, wPortStatus=0x0100,
wPortChange=0x0000, err=USB_ERR_NORMAL_COMPLETION
Feb 9 18:13:40 kernel: uhub_read_port_status: port 2, wPortStatus=0x0500,
wPortChange=0x0000, err=USB_ERR_NORMAL_COMPLETION
Feb 9 18:13:41 kernel: usbd_transfer_power_ref: Adding type 2 to power
state
Feb 9 18:13:41 kernel: usbd_transfer_power_ref: needs power
Feb 9 18:13:41 kernel: usb_bus_port_set_device: bus 0xffffff8001dfa170
devices[2] = 0xfffffe003f9bd800
Feb 9 18:13:41 kernel: ugen1.2: <Seagate> at usbus1
Feb 9 18:13:41 kernel: umass1: <Seagate FA GoFlex Desk, class 0/0, rev
3.00/1.00, addr 2> on usbus1
Feb 9 18:13:41 kernel: umass1: SCSI over Bulk-Only; quirks = 0x4100
Feb 9 18:13:41 kernel: umass1:5:1:-1: Attached to scbus5
Feb 9 18:13:41 kernel: uhub_read_port_status: port 2, wPortStatus=0x07a0,
wPortChange=0x0000, err=USB_ERR_NORMAL_COMPLETION
Feb 9 18:13:41 kernel: usb_bus_powerd: bus=0xffffff8001dfa170
Feb 9 18:13:41 kernel: uhub_explore: udev=0xfffffe001ba93000 addr=1
Feb 9 18:13:41 kernel: uhub_read_port_status: port 1, wPortStatus=0x0703,
wPortChange=0x0000, err=USB_ERR_NORMAL_COMPLETION
Feb 9 18:13:41 kernel: uhub_read_port_status: port 2, wPortStatus=0x07a0,
wPortChange=0x0000, err=USB_ERR_NORMAL_COMPLETION
Feb 9 18:13:41 kernel: da1 at umass-sim1 bus 1 scbus5 target 0 lun 0
Feb 9 18:13:41 kernel: da1: <Seagate FA GoFlex Desk 0D12> Fixed Direct
Access SCSI-0 device
Feb 9 18:13:41 kernel: da1: 400.000MB/s transfers
Feb 9 18:13:41 kernel: da1: 1907729MB (3907029167 512 byte sectors: 255H
63S/T 243201C)
Feb 9 18:13:43 kernel: usb_needs_explore:
Feb 9 18:13:43 kernel: usb_bus_powerd: bus=0xffffff8001dfa170
Feb 9 18:13:43 kernel: usb_bus_powerd: Recomputing power masks
Feb 9 18:13:43 kernel: uhub_explore: udev=0xfffffe001ba93000 addr=1
Feb 9 18:13:43 kernel: uhub_read_port_status: port 1, wPortStatus=0x0703,
wPortChange=0x0000, err=USB_ERR_NORMAL_COMPLETION
Feb 9 18:13:43 kernel: uhub_read_port_status: port 2, wPortStatus=0x07a0,
wPortChange=0x0000, err=USB_ERR_NORMAL_COMPLETION
Feb 9 18:13:44 kernel: usb_needs_explore:
Feb 9 18:13:44 kernel: usb_bus_powerd: bus=0xffffff8001d90cd8
Feb 9 18:13:44 kernel: uhub_explore: udev=0xfffffe001ba93800 addr=1
Feb 9 18:13:44 kernel: uhub_read_port_status: port 1, wPortStatus=0x0503,
wPortChange=0x0000, err=USB_ERR_NORMAL_COMPLETION
Feb 9 18:13:44 kernel: uhub_explore: udev=0xfffffe001bb3c800 addr=2
Feb 9 18:13:44 kernel: uhub_read_port_status: port 1, wPortStatus=0x0100,
wPortChange=0x0000, err=USB_ERR_NORMAL_COMPLETION
Feb 9 18:13:44 kernel: uhub_read_port_status: port 2, wPortStatus=0x0503,
wPortChange=0x0000, err=USB_ERR_NORMAL_COMPLETION
Feb 9 18:13:44 kernel: uhub_read_port_status: port 3, wPortStatus=0x0100,
wPortChange=0x0000, err=USB_ERR_NORMAL_COMPLETION
Feb 9 18:13:44 kernel: uhub_read_port_status: port 4, wPortStatus=0x0100,
wPortChange=0x0000, err=USB_ERR_NORMAL_COMPLETION
Feb 9 18:13:44 kernel: uhub_read_port_status: port 5, wPortStatus=0x0103,
wPortChange=0x0000, err=USB_ERR_NORMAL_COMPLETION
Feb 9 18:13:44 kernel: uhub_read_port_status: port 6, wPortStatus=0x0100,
wPortChange=0x0000, err=USB_ERR_NORMAL_COMPLETION
Feb 9 18:13:44 kernel: uhub_read_port_status: port 2, wPortStatus=0x0500,
wPortChange=0x0000, err=USB_ERR_NORMAL_COMPLETION
Feb 9 18:13:44 kernel: usb_needs_explore:
Feb 9 18:13:44 kernel: usb_bus_powerd: bus=0xffffff8001e04cd8
Feb 9 18:13:44 kernel: uhub_explore: udev=0xfffffe001bb3d000 addr=1
Feb 9 18:13:44 kernel: uhub_read_port_status: port 1, wPortStatus=0x0503,
wPortChange=0x0000, err=USB_ERR_NORMAL_COMPLETION
Feb 9 18:13:44 kernel: uhub_explore: udev=0xfffffe001bb3c000 addr=2
Feb 9 18:13:44 kernel: uhub_read_port_status: port 1, wPortStatus=0x0100,
wPortChange=0x0000, err=USB_ERR_NORMAL_COMPLETION
Feb 9 18:13:44 kernel: uhub_read_port_status: port 2, wPortStatus=0x0100,
wPortChange=0x0000, err=USB_ERR_NORMAL_COMPLETION
Feb 9 18:13:44 kernel: uhub_read_port_status: port 3, wPortStatus=0x0100,
wPortChange=0x0000, err=USB_ERR_NORMAL_COMPLETION
Feb 9 18:13:44 kernel: uhub_read_port_status: port 4, wPortStatus=0x0503,
wPortChange=0x0000, err=USB_ERR_NORMAL_COMPLETION
Feb 9 18:13:44 kernel: uhub_read_port_status: port 5, wPortStatus=0x0100,
wPortChange=0x0000, err=USB_ERR_NORMAL_COMPLETION
Feb 9 18:13:44 kernel: uhub_read_port_status: port 6, wPortStatus=0x0100,
wPortChange=0x0000, err=USB_ERR_NORMAL_COMPLETION
Feb 9 18:13:44 kernel: uhub_read_port_status: port 7, wPortStatus=0x0100,
wPortChange=0x0000, err=USB_ERR_NORMAL_COMPLETION
Feb 9 18:13:44 kernel: uhub_read_port_status: port 8, wPortStatus=0x0100,
wPortChange=0x0000, err=USB_ERR_NORMAL_COMPLETION
Feb 9 18:13:44 kernel: uhub_read_port_status: port 2, wPortStatus=0x0500,
wPortChange=0x0000, err=USB_ERR_NORMAL_COMPLETION


--

Sam Fourman Jr.
_______________________________________________
freebsd...@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-current
To unsubscribe, send any mail to "freebsd-curre...@freebsd.org"

Hans Petter Selasky

unread,
Feb 9, 2012, 8:40:30 PM2/9/12
to
On Friday 10 February 2012 01:22:53 Sam Fourman Jr. wrote:
> hello list,
>
> I bought a new Seagate FA GoFlex USB3 removable disk running FreeBSD 10.x
> CURRENT this disk functions correctly on a USB 2.0 port (I can use zpool
> create to create a ZFS pool)
> however when attached to a USB 3.0 port it does not function correctly when
> attempting to create a zpool i get
>
> *AutoSense failed*
>
> this happens across 3 separate computers all running FreeBSD while booting
> from a usb stick attached to da0 i enabled USB_DEBUG in the kernel
>
> any ideas?

usbconfig dump_quirk_names


Try to add the no sync cache quirk for your disk.

Could you show dmesg w/o usb.debug enabled?

--HPS

Hans Petter Selasky

unread,
Feb 10, 2012, 3:08:24 AM2/10/12
to
On Friday 10 February 2012 07:53:16 Sam Fourman Jr. wrote:
> UQ_MSC

Try to add some of the quirks like this:

usbconfig -d X.Y add_quirk UQ_MSC_XXX

UQ_MSC_NO_INQUIRY
UQ_MSC_NO_SYNC_CACHE

Then replug your device.

Sam Fourman Jr.

unread,
Feb 10, 2012, 3:18:38 AM2/10/12
to
On Fri, Feb 10, 2012 at 2:08 AM, Hans Petter Selasky <hsel...@c2i.net>wrote:

> On Friday 10 February 2012 07:53:16 Sam Fourman Jr. wrote:
> > UQ_MSC
>
> Try to add some of the quirks like this:
>
> usbconfig -d X.Y add_quirk UQ_MSC_XXX
>
> UQ_MSC_NO_INQUIRY
> UQ_MSC_NO_SYNC_CACHE
>
> Then replug your device.
>
>

Icarus# usbconfig
ugen0.1: <EHCI root HUB Intel> at usbus0, cfg=0 md=HOST spd=HIGH (480Mbps)
pwr=SAVE
ugen1.1: <XHCI root HUB 0x1b73> at usbus1, cfg=0 md=HOST spd=SUPER
(5.0Gbps) pwr=SAVE
ugen2.1: <EHCI root HUB Intel> at usbus2, cfg=0 md=HOST spd=HIGH (480Mbps)
pwr=SAVE
ugen0.2: <product 0x0024 vendor 0x8087> at usbus0, cfg=0 md=HOST spd=HIGH
(480Mbps) pwr=SAVE
ugen2.2: <product 0x0024 vendor 0x8087> at usbus2, cfg=0 md=HOST spd=HIGH
(480Mbps) pwr=SAVE
ugen0.3: <product 0x3304 vendor 0x13d3> at usbus0, cfg=0 md=HOST spd=FULL
(12Mbps) pwr=ON
ugen0.4: <USB2.0 UVC 2M WebCam USB2.0 UVC 2M WebCam> at usbus0, cfg=0
md=HOST spd=HIGH (480Mbps) pwr=ON
ugen1.2: <FA GoFlex Desk Seagate> at usbus1, cfg=0 md=HOST spd=SUPER
(5.0Gbps) pwr=ON

Icarus# usbconfig -d 1.2 add_quirk UQ_MSC_NO_INQUIRY
Icarus# usbconfig -d 1.2 add_quirk UQ_MSC_NO_SYNC_CACHE



ugen1.2: <Seagate> at usbus1 (disconnected)
umass0: at uhub1, port 1, addr 1 (disconnected)
(pass2:umass-sim0:0:0:0): lost device
(pass2:umass-sim0:0:0:0): removing device entry
(da0:umass-sim0:0:0:0): lost device - 0 outstanding, 0 refs
(da0:umass-sim0:0:0:0): removing device entry
ugen1.2: <Seagate> at usbus1
umass0: <Seagate FA GoFlex Desk, class 0/0, rev 3.00/1.00, addr 2> on usbus1
umass0: SCSI over Bulk-Only; quirks = 0x4400
umass0:3:0:-1: Attached to scbus3
(probe0:umass-sim0:0:0:0): SCSI status error
(probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 1 0 0 ff 0
(probe0:umass-sim0:0:0:0): CAM status: SCSI Status Error
(probe0:umass-sim0:0:0:0): SCSI status: Check Condition
(probe0:umass-sim0:0:0:0): SCSI sense: ILLEGAL REQUEST asc:24,0 (Invalid
field in CDB)
(probe0:umass-sim0:0:0:0): Error 22, Unretryable error
pass2 at umass-sim0 bus 0 scbus3 target 0 lun 0
pass2: < > Removable Direct Access SCSI-2 device
pass2: 400.000MB/s transfers
GEOM: new disk da0
(da0:umass-sim0:0:0:0): SCSI status error
(da0:umass-sim0:0:0:0): READ CAPACITY(10). CDB: 25 0 0 0 0 0 0 0 0 0
(da0:umass-sim0:0:0:0): CAM status: SCSI Status Error
(da0:umass-sim0:0:0:0): SCSI status: Check Condition
(da0:umass-sim0:0:0:0): SCSI sense: NOT READY asc:4,1 (Logical unit is in
process of becoming ready)
(da0:umass-sim0:0:0:0): Polling device for readiness
da0 at umass-sim0 bus 0 scbus3 target 0 lun 0
da0: < > Removable Direct Access SCSI-2 device
da0: 400.000MB/s transfers
da0: 1907729MB (3907029167 512 byte sectors: 255H 63S/T 243201C)
(da0:umass-sim0:0:0:0): Request completed with CAM_REQ_CMP_ERR
(da0:umass-sim0:0:0:0): Retrying command
(da0:umass-sim0:0:0:0): AutoSense failed
(da0:umass-sim0:0:0:0): Error 5, Unretryable error
(da0:umass-sim0:0:0:0): Request completed with CAM_REQ_CMP_ERR
(da0:umass-sim0:0:0:0): Retrying command
(da0:umass-sim0:0:0:0): AutoSense failed
(da0:umass-sim0:0:0:0): Error 5, Unretryable error


--HPS
>



--

Sam Fourman Jr.
Fourman Networks
http://www.fourmannetworks.com

Hans Petter Selasky

unread,
Feb 10, 2012, 3:33:05 AM2/10/12
to
Hi,

I believe some SCSI guys needs to look at that. If the USB transport is OK,
then there is nothing more USB can do ...

You can try to enable USB debugging in umass. This maybe requires a kernel
recompile with "options USB_DEBUG".

Then set:

sysctl hw.usb.umass.debug=-1

If you see any errors on the status stage or timeouts, its USB's fault. Else
it is some SCSI stuff.

--HPS

Sam Fourman Jr.

unread,
Feb 10, 2012, 1:53:16 AM2/10/12
to
>
> usbconfig dump_quirk_names
>
>
> Try to add the no sync cache quirk for your disk.
>
> Could you show dmesg w/o usb.debug enabled?
>
>



here is the error

ZFS NOTICE: Prefetch is disabled by default if less than 4GB of RAM is
present;
to enable, add "vfs.zfs.prefetch_disable=0" to
/boot/loader.conf.
ZFS filesystem version 5
ZFS storage pool version 28
(da0:umass-sim0:0:0:0): Request completed with CAM_REQ_CMP_ERR
(da0:umass-sim0:0:0:0): Retrying command
xhci_do_command: Command timeout!
(da0:umass-sim0:0:0:0): SCSI status error
(da0:umass-sim0:0:0:0): WRITE(10). CDB: 2a 0 0 0 0 20 0 0 e0 0
(da0:umass-sim0:0:0:0): CAM status: SCSI Status Error
(da0:umass-sim0:0:0:0): SCSI status: Check Condition
(da0:umass-sim0:0:0:0): SCSI sense: NOT READY asc:4,1 (Logical unit is in
process of becoming ready)
(da0:umass-sim0:0:0:0): Polling device for readiness
(da0:umass-sim0:0:0:0): Request completed with CAM_REQ_CMP_ERR
(da0:umass-sim0:0:0:0): Retrying command
(da0:umass-sim0:0:0:0): AutoSense failed
(da0:umass-sim0:0:0:0): Error 5, Unretryable error
(da0:umass-sim0:0:0:0): Request completed with CAM_REQ_CMP_ERR
(da0:umass-sim0:0:0:0): Retrying command
(da0:umass-sim0:0:0:0): AutoSense failed
(da0:umass-sim0:0:0:0): Error 5, Unretryable error
Icarus#


Icarus# usbconfig dump_quirk_names

Dumping list of supported quirks:

UQ_MATCH_VENDOR_ONLY
UQ_AUDIO_SWAP_LR
UQ_AU_INP_ASYNC
UQ_AU_NO_FRAC
UQ_AU_NO_XU
UQ_BAD_ADC
UQ_BAD_AUDIO
UQ_BROKEN_BIDIR
UQ_BUS_POWERED
UQ_HID_IGNORE
UQ_KBD_IGNORE
UQ_KBD_BOOTPROTO
UQ_MS_BAD_CLASS
UQ_MS_LEADING_BYTE
UQ_MS_REVZ
UQ_NO_STRINGS
UQ_OPEN_CLEARSTALL
UQ_POWER_CLAIM
UQ_SPUR_BUT_UP
UQ_SWAP_UNICODE
UQ_CFG_INDEX_1
UQ_CFG_INDEX_2
UQ_CFG_INDEX_3
UQ_CFG_INDEX_4
UQ_CFG_INDEX_0
UQ_ASSUME_CM_OVER_DATA
UQ_MSC_NO_TEST_UNIT_READY
UQ_MSC_NO_RS_CLEAR_UA
UQ_MSC_NO_START_STOP
UQ_MSC_NO_GETMAXLUN
UQ_MSC_NO_INQUIRY
UQ_MSC_NO_INQUIRY_EVPD
UQ_MSC_NO_SYNC_CACHE
UQ_MSC_SHUTTLE_INIT
UQ_MSC_ALT_IFACE_1
UQ_MSC_FLOPPY_SPEED
UQ_MSC_IGNORE_RESIDUE
UQ_MSC_WRONG_CSWSIG
UQ_MSC_RBC_PAD_TO_12
UQ_MSC_READ_CAP_OFFBY1
UQ_MSC_FORCE_SHORT_INQ
UQ_MSC_FORCE_WIRE_BBB
UQ_MSC_FORCE_WIRE_CBI
UQ_MSC_FORCE_WIRE_CBI_I
UQ_MSC_FORCE_PROTO_SCSI
UQ_MSC_FORCE_PROTO_ATAPI
UQ_MSC_FORCE_PROTO_UFI
UQ_MSC_FORCE_PROTO_RBC
UQ_MSC_EJECT_HUAWEI
UQ_MSC_EJECT_SIERRA
UQ_MSC_EJECT_SCSIEJECT
UQ_MSC_EJECT_REZERO
UQ_MSC_EJECT_ZTESTOR
UQ_MSC_EJECT_CMOTECH
UQ_MSC_EJECT_WAIT
UQ_MSC_EJECT_SAEL_M460
UQ_MSC_EJECT_HUAWEISCSI
UQ_MSC_EJECT_TCT
UQ_BAD_MIDI
UQ_AU_VENDOR_CLASS
UQ_SINGLE_CMD_MIDI


Icarus# dmesg
Table 'FACP' at 0xaaf9ad98
Table 'APIC' at 0xaaffdf18
APIC: Found table at 0xaaffdf18
APIC: Using the MADT enumerator.
MADT: Found CPU APIC ID 0 ACPI ID 1: enabled
SMP: Added CPU 0 (AP)
MADT: Found CPU APIC ID 2 ACPI ID 2: enabled
SMP: Added CPU 2 (AP)
MADT: Found CPU APIC ID 4 ACPI ID 3: enabled
SMP: Added CPU 4 (AP)
MADT: Found CPU APIC ID 6 ACPI ID 4: enabled
SMP: Added CPU 6 (AP)
MADT: Found CPU APIC ID 1 ACPI ID 5: enabled
SMP: Added CPU 1 (AP)
MADT: Found CPU APIC ID 3 ACPI ID 6: enabled
SMP: Added CPU 3 (AP)
MADT: Found CPU APIC ID 5 ACPI ID 7: enabled
SMP: Added CPU 5 (AP)
MADT: Found CPU APIC ID 7 ACPI ID 8: enabled
SMP: Added CPU 7 (AP)
MADT: Found CPU APIC ID 8 ACPI ID 9: disabled
MADT: Found CPU APIC ID 9 ACPI ID 10: disabled
MADT: Found CPU APIC ID 10 ACPI ID 11: disabled
MADT: Found CPU APIC ID 11 ACPI ID 12: disabled
MADT: Found CPU APIC ID 12 ACPI ID 13: disabled
MADT: Found CPU APIC ID 13 ACPI ID 14: disabled
MADT: Found CPU APIC ID 14 ACPI ID 15: disabled
MADT: Found CPU APIC ID 15 ACPI ID 16: disabled
Copyright (c) 1992-2012 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 10.0-CURRENT #3 r231181M: Wed Feb 8 00:31:01 UTC 2012
sfourman@Titan:/usr/obj/usr/src/sys/GENERIC amd64
WARNING: WITNESS option enabled, expect reduced performance.
Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff81665000.
Calibrating TSC clock ... TSC clock: 1995507584 Hz
CPU: Intel(R) Core(TM) i7-2630QM CPU @ 2.00GHz (1995.51-MHz K8-class CPU)
Origin = "GenuineIntel" Id = 0x206a7 Family = 6 Model = 2a Stepping =
7

Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>

Features2=0x1dbae3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,XSAVE,OSXSAVE,AVX>
AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM>
AMD Features2=0x1<LAHF>
TSC: P-state invariant, performance statistics
real memory = 4294967296 (4096 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009afff, 630784 bytes (154 pages)
0x0000000000100000 - 0x00000000001fffff, 1048576 bytes (256 pages)
0x0000000001696000 - 0x000000001fffffff, 513187840 bytes (125290 pages)
0x0000000020200000 - 0x000000003fffffff, 534773760 bytes (130560 pages)
0x0000000040200000 - 0x00000000a0e34fff, 1623412736 bytes (396341 pages)
0x00000000aad8e000 - 0x00000000aad94fff, 28672 bytes (7 pages)
0x00000000aad96000 - 0x00000000aad96fff, 4096 bytes (1 pages)
0x00000000aadb8000 - 0x00000000aadc5fff, 57344 bytes (14 pages)
0x00000000aade8000 - 0x00000000aaf22fff, 1290240 bytes (315 pages)
0x00000000aafe8000 - 0x00000000aaffcfff, 86016 bytes (21 pages)
0x0000000100000000 - 0x000000014f7e7fff, 1333690368 bytes (325608 pages)
avail memory = 3978256384 (3793 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <_ASUS_ Notebook>
INTR: Adding local APIC 1 as a target
INTR: Adding local APIC 2 as a target
INTR: Adding local APIC 3 as a target
INTR: Adding local APIC 4 as a target
INTR: Adding local APIC 5 as a target
INTR: Adding local APIC 6 as a target
INTR: Adding local APIC 7 as a target
FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s) x 2 SMT threads
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
cpu2 (AP): APIC ID: 2
cpu3 (AP): APIC ID: 3
cpu4 (AP): APIC ID: 4
cpu5 (AP): APIC ID: 5
cpu6 (AP): APIC ID: 6
cpu7 (AP): APIC ID: 7
x86bios: IVT 0x000000-0x0004ff at 0xfffffe0000000000
x86bios: SSEG 0x001000-0x001fff at 0xffffff8000241000
x86bios: EBDA 0x09e000-0x09ffff at 0xfffffe000009e000
x86bios: ROM 0x0a0000-0x0fefff at 0xfffffe00000a0000
APIC: CPU 0 has ACPI ID 1
APIC: CPU 1 has ACPI ID 5
APIC: CPU 2 has ACPI ID 2
APIC: CPU 3 has ACPI ID 6
APIC: CPU 4 has ACPI ID 3
APIC: CPU 5 has ACPI ID 7
APIC: CPU 6 has ACPI ID 4
APIC: CPU 7 has ACPI ID 8
lapic0: CMCI unmasked
ULE: setup cpu 0
ULE: setup cpu 1
ULE: setup cpu 2
ULE: setup cpu 3
ULE: setup cpu 4
ULE: setup cpu 5
ULE: setup cpu 6
ULE: setup cpu 7
ACPI: RSDP 0xf0430 00024 (v02 _ASUS_)
ACPI: XSDT 0xaaffee18 00074 (v01 _ASUS_ Notebook 06222004 MSFT 00010013)
ACPI: FACP 0xaaf9ad98 000F4 (v04 _ASUS_ Notebook 06222004 MSFT 00010013)
ACPI Warning: 32/64X FACS address mismatch in FADT -
0xAAFE4E40/0x00000000AAFE4D40, using 32 (20120111/tbfadt-531)
ACPI: DSDT 0xaaf86018 13833 (v01 _ASUS_ Notebook 00000000 INTL 20091112)
ACPI: FACS 0xaafe4e40 00040
ACPI: APIC 0xaaffdf18 000CC (v02 _ASUS_ Notebook 06222004 MSFT 00010013)
ACPI: DBGP 0xaaffff18 00034 (v01 _ASUS_ Notebook 06222004 MSFT 00010013)
ACPI: ECDT 0xaafe4b18 000C1 (v01 _ASUS_ Notebook 06222004 AMI. 00000003)
ACPI: SLIC 0xaaf9be18 00176 (v01 _ASUS_ Notebook 06222004 ASUS 00000001)
ACPI: HPET 0xaafe5d18 00038 (v01 _ASUS_ Notebook 06222004 AMI. 00000003)
ACPI: MCFG 0xaafe5c98 0003C (v01 _ASUS_ Notebook 06222004 MSFT 00000097)
ACPI: SSDT 0xaaf85018 00913 (v01 PmRef Cpu0Ist 00003000 INTL 20091112)
ACPI: SSDT 0xaaf84018 00996 (v01 PmRef CpuPm 00003000 INTL 20091112)
ACPI: ASF! 0xaafe4a18 000A0 (v32 INTEL HCG 00000001 TFSM 000F4240)
MADT: Found IO APIC ID 2, Interrupt 0 at 0xfec00000
ioapic0: Routing external 8259A's -> intpin 0
MADT: Interrupt override: source 0, irq 2
ioapic0: Routing IRQ 0 -> intpin 2
MADT: Interrupt override: source 9, irq 9
ioapic0: intpin 9 trigger: level
ioapic0 <Version 2.0> irqs 0-23 on motherboard
cpu0 BSP:
ID: 0x00000000 VER: 0x01060015 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
cmci: 0x000000f2
wlan: <802.11 Link Layer>
snd_unit_init() u=0x00ff8000 [512] d=0x00007c00 [32] c=0x000003ff [1024]
feeder_register: snd_unit=-1 snd_maxautovchans=16 latency=5
feeder_rate_min=1 feeder_rate_max=2016000 feeder_rate_round=25
kbd: new array size 4
kbd1 at kbdmux0
mem: <memory>
nfslock: pseudo-device
null: <null device, zero device>
random: <entropy source, Software, Yarrow>
io: <I/O>
hptrr: RocketRAID 17xx/2xxx SATA controller driver v1.2
ctl: CAM Target Layer loaded
acpi0: <_ASUS_ Notebook> on motherboard
PCIe: Memory Mapped configuration base @ 0xe0000000
ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 0 vector 48
acpi_ec0: <Embedded Controller: GPE 0x1b, ECDT> port 0x62,0x66 on acpi0
ACPI: Executed 1 blocks of module-level executable AML code
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
ACPI: SSDT 0xaadca798 0073F (v01 PmRef Cpu0Cst 00003001 INTL 20091112)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0 0073F (v01 PmRef Cpu0Cst 00003001 INTL 20091112)
cpu1: <ACPI CPU> on acpi0
ACPI: SSDT 0xaadcba98 00303 (v01 PmRef ApIst 00003000 INTL 20091112)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0 00303 (v01 PmRef ApIst 00003000 INTL 20091112)
ACPI: SSDT 0xaadc9d98 00119 (v01 PmRef ApCst 00003000 INTL 20091112)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0 00119 (v01 PmRef ApCst 00003000 INTL 20091112)
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
cpu4: <ACPI CPU> on acpi0
cpu5: <ACPI CPU> on acpi0
cpu6: <ACPI CPU> on acpi0
cpu7: <ACPI CPU> on acpi0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
hpet0: vendor 0x8086, rev 0x1, 14318180Hz 64bit, 8 timers, legacy route
hpet0: t0: irqs 0x00f00000 (0), MSI, 64bit, periodic
hpet0: t1: irqs 0x00f00000 (0), MSI
hpet0: t2: irqs 0x00f00800 (0), MSI
hpet0: t3: irqs 0x00f01000 (0), MSI
hpet0: t4: irqs 0x00000000 (0), MSI
hpet0: t5: irqs 0x00000000 (0), MSI
hpet0: t6: irqs 0x00000000 (0), MSI
hpet0: t7: irqs 0x00000000 (0), MSI
Timecounter "HPET" frequency 14318180 Hz quality 950
msi: routing MSI-X IRQ 256 to local APIC 0 vector 49
msi: routing MSI-X IRQ 257 to local APIC 0 vector 50
msi: routing MSI-X IRQ 258 to local APIC 0 vector 51
msi: routing MSI-X IRQ 259 to local APIC 0 vector 52
msi: routing MSI-X IRQ 260 to local APIC 0 vector 53
msi: routing MSI-X IRQ 261 to local APIC 0 vector 54
msi: routing MSI-X IRQ 262 to local APIC 0 vector 55
msi: routing MSI-X IRQ 263 to local APIC 0 vector 56
Event timer "HPET" frequency 14318180 Hz quality 550
atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0
atrtc0: Warning: Couldn't map I/O.
atrtc0: registered as a time-of-day clock (resolution 1000000us, adjustment
0.500000000s)
ioapic0: routing intpin 8 (ISA IRQ 8) to lapic 0 vector 57
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
ioapic0: routing intpin 2 (ISA IRQ 0) to lapic 0 vector 58
Event timer "i8254" frequency 1193182 Hz quality 100
ACPI timer: 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 -> 10
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
pci_link0: Index IRQ Rtd Ref IRQs
Initial Probe 0 11 N 0 3 4 5 6 7 10 11 12
Validation 0 11 N 0 3 4 5 6 7 10 11 12
After Disable 0 255 N 0 3 4 5 6 7 10 11 12
pci_link1: Index IRQ Rtd Ref IRQs
Initial Probe 0 10 N 0 3 4 5 6 7 10 12
Validation 0 10 N 0 3 4 5 6 7 10 12
After Disable 0 255 N 0 3 4 5 6 7 10 12
pci_link2: Index IRQ Rtd Ref IRQs
Initial Probe 0 5 N 0 3 4 5 6 7 10 12
Validation 0 5 N 0 3 4 5 6 7 10 12
After Disable 0 255 N 0 3 4 5 6 7 10 12
pci_link3: Index IRQ Rtd Ref IRQs
Initial Probe 0 5 N 0 3 4 5 6 7 10 12
Validation 0 5 N 0 3 4 5 6 7 10 12
After Disable 0 255 N 0 3 4 5 6 7 10 12
pci_link4: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 5 6 7 10 12
Validation 0 255 N 0 3 4 5 6 7 10 12
After Disable 0 255 N 0 3 4 5 6 7 10 12
pci_link5: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 5 6 7 10 12
Validation 0 255 N 0 3 4 5 6 7 10 12
After Disable 0 255 N 0 3 4 5 6 7 10 12
pci_link6: Index IRQ Rtd Ref IRQs
Initial Probe 0 5 N 0 3 4 5 6 7 10 12
Validation 0 5 N 0 3 4 5 6 7 10 12
After Disable 0 255 N 0 3 4 5 6 7 10 12
pci_link7: Index IRQ Rtd Ref IRQs
Initial Probe 0 3 N 0 3 4 5 6 7 10 12
Validation 0 3 N 0 3 4 5 6 7 10 12
After Disable 0 255 N 0 3 4 5 6 7 10 12
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pcib0: decoding 4 range 0-0xcf7
pcib0: decoding 4 range 0xd00-0xffff
pcib0: decoding 3 range 0xa0000-0xbffff
pcib0: decoding 3 range 0xd0000-0xd3fff
pcib0: decoding 3 range 0xd4000-0xd7fff
pcib0: decoding 3 range 0xd8000-0xdbfff
pcib0: decoding 3 range 0xdc000-0xdffff
pcib0: decoding 3 range 0xe0000-0xe3fff
pcib0: decoding 3 range 0xe4000-0xe7fff
pcib0: decoding 3 range 0xb0000000-0xfeafffff
pcib0: decoding 3 range 0xfed40000-0xfed44fff
pci0: <ACPI PCI bus> on pcib0
pci0: domain=0, physical bus=0
found-> vendor=0x8086, dev=0x0104, revid=0x09
domain=0, bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x3090, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x0101, revid=0x09
domain=0, bus=0, slot=1, func=0
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x10 (4000 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 3 supports D0 D3 current D0
MSI supports 1 message
pcib0: matched entry for 0.1.INTA
pcib0: slot 1 INTA hardwired to IRQ 16
found-> vendor=0x8086, dev=0x0116, revid=0x09
domain=0, bus=0, slot=2, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0090, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 2 supports D0 D3 current D0
MSI supports 1 message
map[10]: type Memory, range 64, base 0xdc400000, size 22, enabled
pcib0: allocated type 3 (0xdc400000-0xdc7fffff) for rid 10 of pci0:0:2:0
map[18]: type Prefetchable Memory, range 64, base 0xb0000000, size 28,
enabled
pcib0: allocated type 3 (0xb0000000-0xbfffffff) for rid 18 of pci0:0:2:0
map[20]: type I/O Port, range 32, base 0xe000, size 6, enabled
pcib0: allocated type 4 (0xe000-0xe03f) for rid 20 of pci0:0:2:0
pcib0: matched entry for 0.2.INTA
pcib0: slot 2 INTA hardwired to IRQ 16
found-> vendor=0x8086, dev=0x1c3a, revid=0x04
domain=0, bus=0, slot=22, func=0
class=07-80-00, hdrtype=0x00, mfdev=1
cmdreg=0x0006, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 3 supports D0 D3 current D0
MSI supports 1 message, 64 bit
map[10]: type Memory, range 64, base 0xdf00b000, size 4, enabled
pcib0: allocated type 3 (0xdf00b000-0xdf00b00f) for rid 10 of pci0:0:22:0
pcib0: matched entry for 0.22.INTA
pcib0: slot 22 INTA hardwired to IRQ 16
found-> vendor=0x8086, dev=0x1c2d, revid=0x05
domain=0, bus=0, slot=26, func=0
class=0c-03-20, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 2 supports D0 D3 current D0
map[10]: type Memory, range 32, base 0xdf008000, size 10, enabled
pcib0: allocated type 3 (0xdf008000-0xdf0083ff) for rid 10 of pci0:0:26:0
pcib0: matched entry for 0.26.INTA
pcib0: slot 26 INTA hardwired to IRQ 16
ehci early: SMM active, request owner change
found-> vendor=0x8086, dev=0x1c20, revid=0x05
domain=0, bus=0, slot=27, func=0
class=04-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=5
powerspec 2 supports D0 D3 current D0
MSI supports 1 message, 64 bit
map[10]: type Memory, range 64, base 0xdf000000, size 14, enabled
pcib0: allocated type 3 (0xdf000000-0xdf003fff) for rid 10 of pci0:0:27:0
pcib0: matched entry for 0.27.INTA
pcib0: slot 27 INTA hardwired to IRQ 22
found-> vendor=0x8086, dev=0x1c10, revid=0xb5
domain=0, bus=0, slot=28, func=0
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x10 (4000 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 2 supports D0 D3 current D0
MSI supports 1 message
pcib0: matched entry for 0.28.INTA
pcib0: slot 28 INTA hardwired to IRQ 16
found-> vendor=0x8086, dev=0x1c12, revid=0xb5
domain=0, bus=0, slot=28, func=1
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x10 (4000 ns), maxlat=0x00 (0 ns)
intpin=b, irq=10
powerspec 2 supports D0 D3 current D0
MSI supports 1 message
pcib0: matched entry for 0.28.INTB
pcib0: slot 28 INTB hardwired to IRQ 17
found-> vendor=0x8086, dev=0x1c16, revid=0xb5
domain=0, bus=0, slot=28, func=3
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x10 (4000 ns), maxlat=0x00 (0 ns)
intpin=d, irq=5
powerspec 2 supports D0 D3 current D0
MSI supports 1 message
pcib0: matched entry for 0.28.INTD
pcib0: slot 28 INTD hardwired to IRQ 19
found-> vendor=0x8086, dev=0x1c1a, revid=0xb5
domain=0, bus=0, slot=28, func=5
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x10 (4000 ns), maxlat=0x00 (0 ns)
intpin=b, irq=10
powerspec 2 supports D0 D3 current D0
MSI supports 1 message
pcib0: matched entry for 0.28.INTB
pcib0: slot 28 INTB hardwired to IRQ 17
found-> vendor=0x8086, dev=0x1c26, revid=0x05
domain=0, bus=0, slot=29, func=0
class=0c-03-20, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=3
powerspec 2 supports D0 D3 current D0
map[10]: type Memory, range 32, base 0xdf007000, size 10, enabled
pcib0: allocated type 3 (0xdf007000-0xdf0073ff) for rid 10 of pci0:0:29:0
pcib0: matched entry for 0.29.INTA
pcib0: slot 29 INTA hardwired to IRQ 23
ehci early: SMM active, request owner change
found-> vendor=0x8086, dev=0x1c49, revid=0x05
domain=0, bus=0, slot=31, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x0210, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x1c03, revid=0x05
domain=0, bus=0, slot=31, func=2
class=01-06-01, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=5
powerspec 3 supports D0 D3 current D0
MSI supports 1 message
map[10]: type I/O Port, range 32, base 0xe0b0, size 3, enabled
pcib0: allocated type 4 (0xe0b0-0xe0b7) for rid 10 of pci0:0:31:2
map[14]: type I/O Port, range 32, base 0xe0a0, size 2, enabled
pcib0: allocated type 4 (0xe0a0-0xe0a3) for rid 14 of pci0:0:31:2
map[18]: type I/O Port, range 32, base 0xe090, size 3, enabled
pcib0: allocated type 4 (0xe090-0xe097) for rid 18 of pci0:0:31:2
map[1c]: type I/O Port, range 32, base 0xe080, size 2, enabled
pcib0: allocated type 4 (0xe080-0xe083) for rid 1c of pci0:0:31:2
map[20]: type I/O Port, range 32, base 0xe060, size 5, enabled
pcib0: allocated type 4 (0xe060-0xe07f) for rid 20 of pci0:0:31:2
map[24]: type Memory, range 32, base 0xdf006000, size 11, enabled
pcib0: allocated type 3 (0xdf006000-0xdf0067ff) for rid 24 of pci0:0:31:2
pcib0: matched entry for 0.31.INTB
pcib0: slot 31 INTB hardwired to IRQ 19
found-> vendor=0x8086, dev=0x1c22, revid=0x05
domain=0, bus=0, slot=31, func=3
class=0c-05-00, hdrtype=0x00, mfdev=0
cmdreg=0x0003, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=5
map[10]: type Memory, range 64, base 0xdf005000, size 8, enabled
pcib0: allocated type 3 (0xdf005000-0xdf0050ff) for rid 10 of pci0:0:31:3
map[20]: type I/O Port, range 32, base 0xe040, size 5, enabled
pcib0: allocated type 4 (0xe040-0xe05f) for rid 20 of pci0:0:31:3
pcib0: matched entry for 0.31.INTC
pcib0: slot 31 INTC hardwired to IRQ 18
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
pcib0: allocated type 4 (0xd000-0xdfff) for rid 1c of pcib1
pcib0: allocated type 3 (0xdb000000-0xdc0fffff) for rid 20 of pcib1
pcib0: allocated type 3 (0xc0000000-0xd1ffffff) for rid 24 of pcib1
pcib1: domain 0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0xd000-0xdfff
pcib1: memory decode 0xdb000000-0xdc0fffff
pcib1: prefetched decode 0xc0000000-0xd1ffffff
pci1: <ACPI PCI bus> on pcib1
pci1: domain=0, physical bus=1
found-> vendor=0x10de, dev=0x0df4, revid=0xa1
domain=0, bus=1, slot=0, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0000, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 3 supports D0 D3 current D0
MSI supports 1 message, 64 bit
map[10]: type Memory, range 32, base 0xdb000000, size 24, memory disabled
pcib1: allocated memory range (0xdb000000-0xdbffffff) for rid 10 of
pci0:1:0:0
map[14]: type Prefetchable Memory, range 64, base 0xc0000000, size 28,
enabled
pcib1: allocated prefetch range (0xc0000000-0xcfffffff) for rid 14 of
pci0:1:0:0
map[1c]: type Prefetchable Memory, range 64, base 0xd0000000, size 25,
enabled
pcib1: allocated prefetch range (0xd0000000-0xd1ffffff) for rid 1c of
pci0:1:0:0
map[24]: type I/O Port, range 32, base 0xd000, size 7, port disabled
pcib1: allocated I/O port range (0xd000-0xd07f) for rid 24 of pci0:1:0:0
pcib1: matched entry for 1.0.INTA
pcib1: slot 0 INTA hardwired to IRQ 16
vgapci0: <VGA-compatible display> port 0xd000-0xd07f mem
0xdb000000-0xdbffffff,0xc0000000-0xcfffffff,0xd0000000-0xd1ffffff irq 16 at
device 0.0 on pci1
vgapci1: <VGA-compatible display> port 0xe000-0xe03f mem
0xdc400000-0xdc7fffff,0xb0000000-0xbfffffff irq 16 at device 2.0 on pci0
agp0: <SandyBridge mobile GT2 IG> on vgapci1
agp0: aperture size is 256M, detected 65532k stolen memory
agp0: AGP_SNB_GFX_MODE: 00000000
agp0: AGP_SNB_GCC1: 0x0211
agp0: Mappable GTT entries: 65536
agp0: Total GTT entries: 524288
pci0: <simple comms> at device 22.0 (no driver attached)
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xdf008000-0xdf0083ff irq 16
at device 26.0 on pci0
ioapic0: routing intpin 16 (PCI IRQ 16) to lapic 0 vector 59
usbus0: EHCI version 1.0
usbus0: <EHCI (generic) USB 2.0 controller> on ehci0
usbus0: bpf attached
ehci0: usbpf: Attached
hdac0: <Intel Cougar Point HDA Controller> mem 0xdf000000-0xdf003fff irq 22
at device 27.0 on pci0
hdac0: HDA Driver Revision: 20120126_0002
hdac0: Config options: on=0x00000000 off=0x00000000
hdac0: attempting to allocate 1 MSI vectors (1 supported)
msi: routing MSI IRQ 264 to local APIC 0 vector 60
hdac0: using IRQ 264 for MSI
hdac0: Caps: OSS 4, ISS 4, BSS 0, NSDO 1, 64bit, CORB 256, RIRB 256
pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pcib0: allocated type 4 (0xc000-0xcfff) for rid 1c of pcib2
pcib0: allocated type 3 (0xde600000-0xdeffffff) for rid 20 of pcib2
pcib0: allocated type 3 (0xd4200000-0xd4bfffff) for rid 24 of pcib2
pcib2: domain 0
pcib2: secondary bus 2
pcib2: subordinate bus 2
pcib2: I/O decode 0xc000-0xcfff
pcib2: memory decode 0xde600000-0xdeffffff
pcib2: prefetched decode 0xd4200000-0xd4bfffff
pci2: <ACPI PCI bus> on pcib2
pci2: domain=0, physical bus=2
pcib3: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0
pcib0: allocated type 4 (0xb000-0xbfff) for rid 1c of pcib3
pcib0: allocated type 3 (0xddc00000-0xde5fffff) for rid 20 of pcib3
pcib0: allocated type 3 (0xd3700000-0xd40fffff) for rid 24 of pcib3
pcib3: domain 0
pcib3: secondary bus 3
pcib3: subordinate bus 3
pcib3: I/O decode 0xb000-0xbfff
pcib3: memory decode 0xddc00000-0xde5fffff
pcib3: prefetched decode 0xd3700000-0xd40fffff
pci3: <ACPI PCI bus> on pcib3
pci3: domain=0, physical bus=3
found-> vendor=0x168c, dev=0x002b, revid=0x01
domain=0, bus=3, slot=0, func=0
class=02-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
powerspec 3 supports D0 D1 D3 current D0
MSI supports 1 message
map[10]: type Memory, range 64, base 0xddc00000, size 16, enabled
pcib3: allocated memory range (0xddc00000-0xddc0ffff) for rid 10 of
pci0:3:0:0
pcib3: matched entry for 3.0.INTA
pcib3: slot 0 INTA hardwired to IRQ 17
ath0: <Atheros 9285> mem 0xddc00000-0xddc0ffff irq 17 at device 0.0 on pci3
ioapic0: routing intpin 17 (PCI IRQ 17) to lapic 0 vector 61
[ath] AR9285E_20 detected; using XE TX gain tables
ath0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
ath0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps
24Mbps 36Mbps 48Mbps 54Mbps
ath0: 2T2R
ath0: 11ng MCS 20MHz
ath0: MCS 0-7: 6.5Mbps - 65Mbps
ath0: MCS 8-15: 13Mbps - 130Mbps
ath0: AR9285 mac 192.2 RF5133 phy 14.0
ath0: 2GHz radio: 0x0000; 5GHz radio: 0x00c0
ath0: Use hw queue 1 for WME_AC_BE traffic
ath0: Use hw queue 0 for WME_AC_BK traffic
ath0: Use hw queue 2 for WME_AC_VI traffic
ath0: Use hw queue 3 for WME_AC_VO traffic
ath0: Use hw queue 8 for CAB traffic
ath0: Use hw queue 9 for beacons
ath0: using multicast key search
pcib4: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0
pcib0: allocated type 4 (0xa000-0xafff) for rid 1c of pcib4
pcib0: allocated type 3 (0xdd200000-0xddbfffff) for rid 20 of pcib4
pcib0: allocated type 3 (0xd2c00000-0xd35fffff) for rid 24 of pcib4
pcib4: domain 0
pcib4: secondary bus 4
pcib4: subordinate bus 4
pcib4: I/O decode 0xa000-0xafff
pcib4: memory decode 0xdd200000-0xddbfffff
pcib4: prefetched decode 0xd2c00000-0xd35fffff
pci4: <ACPI PCI bus> on pcib4
pci4: domain=0, physical bus=4
found-> vendor=0x1b73, dev=0x1000, revid=0x04
domain=0, bus=4, slot=0, func=0
class=0c-03-30, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=5
powerspec 3 supports D0 D3 current D0
MSI supports 1 message, 64 bit
map[10]: type Memory, range 32, base 0xdd200000, size 16, enabled
pcib4: allocated memory range (0xdd200000-0xdd20ffff) for rid 10 of
pci0:4:0:0
pcib4: matched entry for 4.0.INTA
pcib4: slot 0 INTA hardwired to IRQ 19
xhci0: <XHCI (generic) USB 3.0 controller> mem 0xdd200000-0xdd20ffff irq 19
at device 0.0 on pci4
ioapic0: routing intpin 19 (PCI IRQ 19) to lapic 0 vector 62
xhci0: 32 byte context size.
usbus1 on xhci0
usbus1: bpf attached
xhci0: usbpf: Attached
pcib5: <ACPI PCI-PCI bridge> irq 17 at device 28.5 on pci0
pcib0: allocated type 4 (0x9000-0x9fff) for rid 1c of pcib5
pcib0: allocated type 3 (0xdc800000-0xdd1fffff) for rid 20 of pcib5
pcib0: allocated type 3 (0xd2100000-0xd2afffff) for rid 24 of pcib5
pcib5: domain 0
pcib5: secondary bus 5
pcib5: subordinate bus 5
pcib5: I/O decode 0x9000-0x9fff
pcib5: memory decode 0xdc800000-0xdd1fffff
pcib5: prefetched decode 0xd2100000-0xd2afffff
pci5: <ACPI PCI bus> on pcib5
pci5: domain=0, physical bus=5
found-> vendor=0x10ec, dev=0x8168, revid=0x06
domain=0, bus=5, slot=0, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
powerspec 3 supports D0 D1 D2 D3 current D0
MSI supports 1 message, 64 bit
MSI-X supports 4 messages in map 0x20
map[10]: type I/O Port, range 32, base 0x9000, size 8, enabled
pcib5: allocated I/O port range (0x9000-0x90ff) for rid 10 of pci0:5:0:0
map[18]: type Prefetchable Memory, range 64, base 0xd2104000, size 12,
enabled
pcib5: allocated prefetch range (0xd2104000-0xd2104fff) for rid 18 of
pci0:5:0:0
map[20]: type Prefetchable Memory, range 64, base 0xd2100000, size 14,
enabled
pcib5: allocated prefetch range (0xd2100000-0xd2103fff) for rid 20 of
pci0:5:0:0
pcib5: matched entry for 5.0.INTA
pcib5: slot 0 INTA hardwired to IRQ 17
re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F PCIe Gigabit Ethernet> port
0x9000-0x90ff mem 0xd2104000-0xd2104fff,0xd2100000-0xd2103fff irq 17 at
device 0.0 on pci5
re0: MSI count : 1
re0: MSI-X count : 4
re0: attempting to allocate 1 MSI-X vectors (4 supported)
msi: routing MSI-X IRQ 265 to local APIC 0 vector 63
re0: using IRQ 265 for MSI-X
re0: Using 1 MSI-X message
re0: turning off MSI enable bit.
re0: ASPM disabled
re0: Chip rev. 0x2c000000
re0: MAC rev. 0x00000000
miibus0: <MII bus> on re0
rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0
rgephy0: OUI 0x00e04c, model 0x0011, rev. 4
rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX,
100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master,
1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow,
1000baseT-FDX-flow-master, auto, auto-flow
re0: bpf attached
re0: Ethernet address: 14:da:e9:20:d9:96
ehci1: <EHCI (generic) USB 2.0 controller> mem 0xdf007000-0xdf0073ff irq 23
at device 29.0 on pci0
ioapic0: routing intpin 23 (PCI IRQ 23) to lapic 0 vector 64
usbus2: EHCI version 1.0
usbus2: <EHCI (generic) USB 2.0 controller> on ehci1
usbus2: bpf attached
ehci1: usbpf: Attached
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <Intel Cougar Point AHCI SATA controller> port
0xe0b0-0xe0b7,0xe0a0-0xe0a3,0xe090-0xe097,0xe080-0xe083,0xe060-0xe07f mem
0xdf006000-0xdf0067ff irq 19 at device 31.2 on pci0
ahci0: attempting to allocate 1 MSI vectors (1 supported)
msi: routing MSI IRQ 266 to local APIC 0 vector 65
ahci0: using IRQ 266 for MSI
ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported
ahci0: Caps: 64bit NCQ SNTF ALP AL CLO 6Gbps PMD SSC PSC 32cmd EM 6ports
ahci0: Caps2: APST
ahci0: EM Caps: ALHD XMT SMB LED
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich0: Caps:
ahcich1: not probed (disabled)
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich2: Caps:
ahcich3: not probed (disabled)
ahcich4: not probed (disabled)
ahcich5: not probed (disabled)
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Sleep Button> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_acad0: <AC Adapter> on acpi0
battery0: <ACPI Control Method Battery> on acpi0
psmcpnp0: <PS/2 mouse port> irq 12 on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0065
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
ioapic0: routing intpin 1 (ISA IRQ 1) to lapic 0 vector 66
atkbd0: [GIANT-LOCKED]
psm0: current command byte:0065
psm0: <PS/2 Mouse> irq 12 on atkbdc0
ioapic0: routing intpin 12 (ISA IRQ 12) to lapic 0 vector 67
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse, device ID 3-00, 3 buttons
psm0: config:00000000, flags:00000008, packet size:4
psm0: syncmask:08, syncbits:00
acpi0: wakeup code va 0xffffff811338e000 pa 0x4000
ahc_isa_probe 0: ioport 0xc00 alloc failed
ahc_isa_probe 1: ioport 0x1c00 alloc failed
ahc_isa_probe 2: ioport 0x2c00 alloc failed
ahc_isa_probe 3: ioport 0x3c00 alloc failed
ahc_isa_probe 4: ioport 0x4c00 alloc failed
ahc_isa_probe 5: ioport 0x5c00 alloc failed
ahc_isa_probe 6: ioport 0x6c00 alloc failed
ahc_isa_probe 7: ioport 0x7c00 alloc failed
ahc_isa_probe 8: ioport 0x8c00 alloc failed
ahc_isa_probe 9: ioport 0x9c00 alloc failed
ahc_isa_probe 10: ioport 0xac00 alloc failed
ahc_isa_probe 11: ioport 0xbc00 alloc failed
ahc_isa_probe 12: ioport 0xcc00 alloc failed
ahc_isa_probe 13: ioport 0xdc00 alloc failed
ahc_isa_probe 14: ioport 0xec00 alloc failed
pcib0: allocated type 3 (0xa0000-0xa07ff) for rid 0 of orm0
pcib0: allocated type 3 (0xa0800-0xa0fff) for rid 0 of orm0
pcib0: allocated type 3 (0xa1000-0xa17ff) for rid 0 of orm0
pcib0: allocated type 3 (0xa1800-0xa1fff) for rid 0 of orm0
pcib0: allocated type 3 (0xa2000-0xa27ff) for rid 0 of orm0
pcib0: allocated type 3 (0xa2800-0xa2fff) for rid 0 of orm0
pcib0: allocated type 3 (0xa3000-0xa37ff) for rid 0 of orm0
pcib0: allocated type 3 (0xa3800-0xa3fff) for rid 0 of orm0
pcib0: allocated type 3 (0xa4000-0xa47ff) for rid 0 of orm0
pcib0: allocated type 3 (0xa4800-0xa4fff) for rid 0 of orm0
pcib0: allocated type 3 (0xa5000-0xa57ff) for rid 0 of orm0
pcib0: allocated type 3 (0xa5800-0xa5fff) for rid 0 of orm0
pcib0: allocated type 3 (0xa6000-0xa67ff) for rid 0 of orm0
pcib0: allocated type 3 (0xa6800-0xa6fff) for rid 0 of orm0
pcib0: allocated type 3 (0xa7000-0xa77ff) for rid 0 of orm0
pcib0: allocated type 3 (0xa7800-0xa7fff) for rid 0 of orm0
pcib0: allocated type 3 (0xa8000-0xa87ff) for rid 0 of orm0
pcib0: allocated type 3 (0xa8800-0xa8fff) for rid 0 of orm0
pcib0: allocated type 3 (0xa9000-0xa97ff) for rid 0 of orm0
pcib0: allocated type 3 (0xa9800-0xa9fff) for rid 0 of orm0
pcib0: allocated type 3 (0xaa000-0xaa7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xaa800-0xaafff) for rid 0 of orm0
pcib0: allocated type 3 (0xab000-0xab7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xab800-0xabfff) for rid 0 of orm0
pcib0: allocated type 3 (0xac000-0xac7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xac800-0xacfff) for rid 0 of orm0
pcib0: allocated type 3 (0xad000-0xad7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xad800-0xadfff) for rid 0 of orm0
pcib0: allocated type 3 (0xae000-0xae7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xae800-0xaefff) for rid 0 of orm0
pcib0: allocated type 3 (0xaf000-0xaf7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xaf800-0xaffff) for rid 0 of orm0
pcib0: allocated type 3 (0xb0000-0xb07ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb0800-0xb0fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb1000-0xb17ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb1800-0xb1fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb2000-0xb27ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb2800-0xb2fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb3000-0xb37ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb3800-0xb3fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb4000-0xb47ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb4800-0xb4fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb5000-0xb57ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb5800-0xb5fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb6000-0xb67ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb6800-0xb6fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb7000-0xb77ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb7800-0xb7fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb8000-0xb87ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb8800-0xb8fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb9000-0xb97ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb9800-0xb9fff) for rid 0 of orm0
pcib0: allocated type 3 (0xba000-0xba7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xba800-0xbafff) for rid 0 of orm0
pcib0: allocated type 3 (0xbb000-0xbb7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xbb800-0xbbfff) for rid 0 of orm0
pcib0: allocated type 3 (0xbc000-0xbc7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xbc800-0xbcfff) for rid 0 of orm0
pcib0: allocated type 3 (0xbd000-0xbd7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xbd800-0xbdfff) for rid 0 of orm0
pcib0: allocated type 3 (0xbe000-0xbe7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xbe800-0xbefff) for rid 0 of orm0
pcib0: allocated type 3 (0xbf000-0xbf7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xbf800-0xbffff) for rid 0 of orm0
pcib0: allocated type 3 (0xd0000-0xd07ff) for rid 1 of orm0
pcib0: allocated type 3 (0xd0800-0xd0fff) for rid 1 of orm0
pcib0: allocated type 3 (0xd1000-0xd17ff) for rid 1 of orm0
pcib0: allocated type 3 (0xd1800-0xd1fff) for rid 1 of orm0
pcib0: allocated type 3 (0xd2000-0xd27ff) for rid 1 of orm0
pcib0: allocated type 3 (0xd2800-0xd2fff) for rid 1 of orm0
pcib0: allocated type 3 (0xd3000-0xd37ff) for rid 1 of orm0
pcib0: allocated type 3 (0xd3800-0xd3fff) for rid 1 of orm0
pcib0: allocated type 3 (0xd4000-0xd47ff) for rid 1 of orm0
pcib0: allocated type 3 (0xd4800-0xd4fff) for rid 1 of orm0
pcib0: allocated type 3 (0xd5000-0xd57ff) for rid 1 of orm0
pcib0: allocated type 3 (0xd5800-0xd5fff) for rid 1 of orm0
pcib0: allocated type 3 (0xd6000-0xd67ff) for rid 1 of orm0
pcib0: allocated type 3 (0xd6800-0xd6fff) for rid 1 of orm0
pcib0: allocated type 3 (0xd7000-0xd77ff) for rid 1 of orm0
pcib0: allocated type 3 (0xd7800-0xd7fff) for rid 1 of orm0
pcib0: allocated type 3 (0xd8000-0xd87ff) for rid 1 of orm0
pcib0: allocated type 3 (0xd8800-0xd8fff) for rid 1 of orm0
pcib0: allocated type 3 (0xd9000-0xd97ff) for rid 1 of orm0
pcib0: allocated type 3 (0xd9800-0xd9fff) for rid 1 of orm0
pcib0: allocated type 3 (0xda000-0xda7ff) for rid 1 of orm0
pcib0: allocated type 3 (0xda800-0xdafff) for rid 1 of orm0
pcib0: allocated type 3 (0xdb000-0xdb7ff) for rid 1 of orm0
pcib0: allocated type 3 (0xdb800-0xdbfff) for rid 1 of orm0
pcib0: allocated type 3 (0xdc000-0xdc7ff) for rid 1 of orm0
pcib0: allocated type 3 (0xdc800-0xdcfff) for rid 1 of orm0
pcib0: allocated type 3 (0xdd000-0xdd7ff) for rid 1 of orm0
pcib0: allocated type 3 (0xdd800-0xddfff) for rid 1 of orm0
pcib0: allocated type 3 (0xde000-0xde7ff) for rid 1 of orm0
pcib0: allocated type 3 (0xde800-0xdefff) for rid 1 of orm0
pcib0: allocated type 3 (0xdf000-0xdf7ff) for rid 1 of orm0
pcib0: allocated type 3 (0xdf800-0xdffff) for rid 1 of orm0
pcib0: allocated type 3 (0xe0000-0xe07ff) for rid 1 of orm0
pcib0: allocated type 3 (0xe0800-0xe0fff) for rid 1 of orm0
pcib0: allocated type 3 (0xe1000-0xe17ff) for rid 1 of orm0
pcib0: allocated type 3 (0xe1800-0xe1fff) for rid 1 of orm0
pcib0: allocated type 3 (0xe2000-0xe27ff) for rid 1 of orm0
pcib0: allocated type 3 (0xe2800-0xe2fff) for rid 1 of orm0
pcib0: allocated type 3 (0xe3000-0xe37ff) for rid 1 of orm0
pcib0: allocated type 3 (0xe3800-0xe3fff) for rid 1 of orm0
pcib0: allocated type 3 (0xe4000-0xe47ff) for rid 1 of orm0
pcib0: allocated type 3 (0xe4800-0xe4fff) for rid 1 of orm0
pcib0: allocated type 3 (0xe5000-0xe57ff) for rid 1 of orm0
pcib0: allocated type 3 (0xe5800-0xe5fff) for rid 1 of orm0
pcib0: allocated type 3 (0xe6000-0xe67ff) for rid 1 of orm0
pcib0: allocated type 3 (0xe6800-0xe6fff) for rid 1 of orm0
pcib0: allocated type 3 (0xe7000-0xe77ff) for rid 1 of orm0
pcib0: allocated type 3 (0xe7800-0xe7fff) for rid 1 of orm0
ex_isa_identify()
isa_probe_children: disabling PnP devices
atkbdc: atkbdc0 already exists; skipping it
atrtc: atrtc0 already exists; skipping it
attimer: attimer0 already exists; skipping it
sc: sc0 already exists; skipping it
isa_probe_children: probing non-PnP devices
orm0: <ISA Option ROM> at iomem 0xc0000-0xce7ff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd1, terminal emulator: scteken (teken terminal)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
pcib0: allocated type 4 (0x3c0-0x3df) for rid 0 of vga0
pcib0: allocated type 3 (0xa0000-0xbffff) for rid 0 of vga0
pcib0: allocated type 4 (0x3f0-0x3f5) for rid 0 of fdc0
pcib0: allocated type 4 (0x3f7-0x3f7) for rid 1 of fdc0
fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
ppc0: cannot reserve I/O port range
ppc0: <Parallel port> failed to probe at irq 7 on isa0
pcib0: allocated type 4 (0x3f8-0x3ff) for rid 0 of uart0
uart0: <ns8250> failed to probe at port 0x3f8-0x3ff irq 4 on isa0
pcib0: allocated type 4 (0x2f8-0x2ff) for rid 0 of uart1
uart1: <ns8250> failed to probe at port 0x2f8-0x2ff irq 3 on isa0
isa_probe_children: probing PnP devices
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
p4tcc1: <CPU Frequency Thermal Control> on cpu1
est2: <Enhanced SpeedStep Frequency Control> on cpu2
p4tcc2: <CPU Frequency Thermal Control> on cpu2
est3: <Enhanced SpeedStep Frequency Control> on cpu3
p4tcc3: <CPU Frequency Thermal Control> on cpu3
est4: <Enhanced SpeedStep Frequency Control> on cpu4
p4tcc4: <CPU Frequency Thermal Control> on cpu4
est5: <Enhanced SpeedStep Frequency Control> on cpu5
p4tcc5: <CPU Frequency Thermal Control> on cpu5
est6: <Enhanced SpeedStep Frequency Control> on cpu6
p4tcc6: <CPU Frequency Thermal Control> on cpu6
est7: <Enhanced SpeedStep Frequency Control> on cpu7
p4tcc7: <CPU Frequency Thermal Control> on cpu7
Device configuration finished.
procfs registered
lapic: Divisor 2, Frequency 49887700 Hz
Timecounters tick every 1.000 msec
vlan: initialized, using hash tables with chaining
lo0: bpf attached
hptrr: no controller detected.
hdacc0: <Realtek ALC269 HDA CODEC> at cad 0 on hdac0
hdacc0: Root Node at nid=0: 1 subnodes 1-1
hdaa0: <Realtek ALC269 HDA CODEC Audio Function Group> at nid 1 on hdacc0
hdaa0: Audio Function Group at nid=1: 34 subnodes 2-35
hdaa0: NumGPIO=2 NumGPO=0 NumGPI=0 GPIWake=0 GPIUnsol=1
hdaa0: GPIO0: disabled
hdaa0: GPIO1: disabled
hdaa0: Original pins configuration:
hdaa0: nid 0x as seq device conn jack loc color misc
hdaa0: 18 411111f0 15 0 Speaker None 1/8 Rear Black 1
hdaa0: 20 411111f0 15 0 Speaker None 1/8 Rear Black 1
hdaa0: 23 411111f0 15 0 Speaker None 1/8 Rear Black 1
hdaa0: 24 04a11830 3 0 Mic Jack 1/8 Right Black 8
hdaa0: 25 99a3093f 3 15 Mic Fixed ATAPI Onboard Unknown 9
hdaa0: 26 411111f0 15 0 Speaker None 1/8 Rear Black 1
hdaa0: 27 99130110 1 0 Speaker Fixed ATAPI Onboard Unknown 1
hdaa0: 29 40079a2d 2 13 Line-out None Analog 0x00 Pink 10
hdaa0: 30 99430120 2 0 SPDIF-out Fixed ATAPI Onboard Unknown 1
hdaa0: 33 0421101f 1 15 Headphones Jack 1/8 Right Black 0
hdaa0: Patching widget caps nid=29 0x00400000 -> 0x00700000
hdaa0: Patched pins configuration:
hdaa0: nid 0x as seq device conn jack loc color misc
hdaa0: 18 411111f0 15 0 Speaker None 1/8 Rear Black 1
DISA
hdaa0: 20 411111f0 15 0 Speaker None 1/8 Rear Black 1
DISA
hdaa0: 23 411111f0 15 0 Speaker None 1/8 Rear Black 1
DISA
hdaa0: 24 04a11830 3 0 Mic Jack 1/8 Right Black 8
hdaa0: 25 99a3093f 3 15 Mic Fixed ATAPI Onboard Unknown 9
hdaa0: 26 411111f0 15 0 Speaker None 1/8 Rear Black 1
DISA
hdaa0: 27 99130110 1 0 Speaker Fixed ATAPI Onboard Unknown 1
hdaa0: 30 99430120 2 0 SPDIF-out Fixed ATAPI Onboard Unknown 1
hdaa0: 33 0421101f 1 15 Headphones Jack 1/8 Right Black 0
hdaa0: 3 associations found:
hdaa0: Association 0 (1) out:
hdaa0: Pin nid=27 seq=0
hdaa0: Pin nid=33 seq=15
hdaa0: Association 1 (2) out:
hdaa0: Pin nid=30 seq=0
hdaa0: Association 2 (3) in:
hdaa0: Pin nid=24 seq=0
hdaa0: Pin nid=25 seq=15
hdaa0: Tracing association 0 (1)
hdaa0: Pin 27 traced to DAC 2
hdaa0: Pin 33 traced to DAC 2 and hpredir 0
hdaa0: Association 0 (1) trace succeeded
hdaa0: Tracing association 1 (2)
hdaa0: Pin 30 traced to DAC 6
hdaa0: Association 1 (2) trace succeeded
hdaa0: Tracing association 2 (3)
hdaa0: Pin 24 traced to ADC 8
hdaa0: Pin 25 traced to ADC 8
hdaa0: Association 2 (3) trace succeeded
hdaa0: Looking for additional DAC for association 0 (1)
hdaa0: Looking for additional DAC for association 1 (2)
hdaa0: Looking for additional ADC for association 2 (3)
hdaa0: Tracing input monitor
hdaa0: Tracing nid 11 to out
hdaa0: nid 11 is input monitor
hdaa0: Tracing nid 35 to out
hdaa0: Tracing other input monitors
hdaa0: Tracing nid 24 to out
hdaa0: Tracing nid 25 to out
hdaa0: Tracing beeper
hdaa0: Headphones redirection for association 0 nid=33 using unsolicited
responses.
hdaa0: FG config/quirks: forcestereo ivref50 ivref80 ivref100 ivref
hdaa0:
hdaa0: +-------------------+
hdaa0: | DUMPING HDA NODES |
hdaa0: +-------------------+
hdaa0:
hdaa0: Default Parameter
hdaa0: -----------------
hdaa0: Stream cap: 0x00000001
hdaa0: PCM
hdaa0: PCM cap: 0x000e0560
hdaa0: 16 20 24 bits, 44 48 96 192 KHz
hdaa0: IN amp: 0x00000000
hdaa0: OUT amp: 0x00000000
hdaa0:
hdaa0: nid: 2
hdaa0: Name: audio output
hdaa0: Widget cap: 0x0000001d
hdaa0: STEREO
hdaa0: Association: 0 (0x00008001)
hdaa0: OSS: pcm (pcm)
hdaa0: Stream cap: 0x00000001
hdaa0: PCM
hdaa0: PCM cap: 0x000e0560
hdaa0: 16 20 24 bits, 44 48 96 192 KHz
hdaa0: Output amp: 0x00025757
hdaa0: mute=0 step=87 size=2 offset=87
hdaa0:
hdaa0: nid: 3 [DISABLED]
hdaa0: Name: audio output
hdaa0: Widget cap: 0x0000001d
hdaa0: STEREO
hdaa0: Stream cap: 0x00000001
hdaa0: PCM
hdaa0: PCM cap: 0x000e0560
hdaa0: 16 20 24 bits, 44 48 96 192 KHz
hdaa0: Output amp: 0x00025757
hdaa0: mute=0 step=87 size=2 offset=87
hdaa0:
hdaa0: nid: 4 [DISABLED]
hdaa0: Name: vendor widget
hdaa0: Widget cap: 0x00f00000
hdaa0:
hdaa0: nid: 5 [DISABLED]
hdaa0: Name: vendor widget
hdaa0: Widget cap: 0x00f00000
hdaa0:
hdaa0: nid: 6
hdaa0: Name: audio output
hdaa0: Widget cap: 0x00000211
hdaa0: DIGITAL STEREO
hdaa0: Association: 1 (0x00000001)
hdaa0: OSS: pcm (pcm)
hdaa0: Stream cap: 0x00000001
hdaa0: PCM
hdaa0: PCM cap: 0x000e05e0
hdaa0: 16 20 24 bits, 44 48 88 96 192 KHz
hdaa0:
hdaa0: nid: 7 [DISABLED]
hdaa0: Name: vendor widget
hdaa0: Widget cap: 0x00f00000
hdaa0:
hdaa0: nid: 8
hdaa0: Name: audio input
hdaa0: Widget cap: 0x0010011b
hdaa0: STEREO
hdaa0: Association: 2 (0x00008001)
hdaa0: Stream cap: 0x00000001
hdaa0: PCM
hdaa0: PCM cap: 0x000e0560
hdaa0: 16 20 24 bits, 44 48 96 192 KHz
hdaa0: Input amp: 0x80051f0b
hdaa0: mute=1 step=31 size=5 offset=11
hdaa0: connections: 1
hdaa0: |
hdaa0: + <- nid=35 [audio mixer]
hdaa0:
hdaa0: nid: 9 [DISABLED]
hdaa0: Name: audio input
hdaa0: Widget cap: 0x0010011b
hdaa0: STEREO
hdaa0: Stream cap: 0x00000001
hdaa0: PCM
hdaa0: PCM cap: 0x000e0560
hdaa0: 16 20 24 bits, 44 48 96 192 KHz
hdaa0: Input amp: 0x80051f0b
hdaa0: mute=1 step=31 size=5 offset=11
hdaa0: connections: 1
hdaa0: |
hdaa0: + [DISABLED] <- nid=34 [audio selector] [DISABLED]
hdaa0:
hdaa0: nid: 10 [DISABLED]
hdaa0: Name: vendor widget
hdaa0: Widget cap: 0x00f00000
hdaa0:
hdaa0: nid: 11
hdaa0: Name: audio mixer
hdaa0: Widget cap: 0x0020010b
hdaa0: STEREO
hdaa0: Association: 2 (0x00008001)
hdaa0: OSS: mix (mix)
hdaa0: Input amp: 0x80051f17
hdaa0: mute=1 step=31 size=5 offset=23
hdaa0: connections: 5
hdaa0: |
hdaa0: + <- nid=24 [pin: Mic (Black Jack)]
hdaa0: + <- nid=25 [pin: Mic (Fixed)]
hdaa0: + [DISABLED] <- nid=26 [pin: Speaker (None)] [DISABLED]
hdaa0: + [DISABLED] <- nid=27 [pin: Speaker (Fixed)]
hdaa0: + <- nid=29 [beep widget]
hdaa0:
hdaa0: nid: 12
hdaa0: Name: audio mixer
hdaa0: Widget cap: 0x0020010b
hdaa0: STEREO
hdaa0: Association: 0 (0x00008001)
hdaa0: OSS: pcm, mix
hdaa0: Input amp: 0x80000000
hdaa0: mute=1 step=0 size=0 offset=0
hdaa0: connections: 2
hdaa0: |
hdaa0: + <- nid=2 [audio output]
hdaa0: + <- nid=11 [audio mixer]
hdaa0:
hdaa0: nid: 13 [DISABLED]
hdaa0: Name: audio mixer
hdaa0: Widget cap: 0x0020010b
hdaa0: STEREO
hdaa0: Association: -2 (0x00000000)
hdaa0: Input amp: 0x80000000
hdaa0: mute=1 step=0 size=0 offset=0
hdaa0: connections: 2
hdaa0: |
hdaa0: + [DISABLED] <- nid=3 [audio output] [DISABLED]
hdaa0: + [DISABLED] <- nid=11 [audio mixer]
hdaa0:
hdaa0: nid: 14 [DISABLED]
hdaa0: Name: vendor widget
hdaa0: Widget cap: 0x00f00000
hdaa0:
hdaa0: nid: 15 [DISABLED]
hdaa0: Name: audio mixer
hdaa0: Widget cap: 0x0020010a
hdaa0: Input amp: 0x80000000
hdaa0: mute=1 step=0 size=0 offset=0
hdaa0: connections: 2
hdaa0: |
hdaa0: + [DISABLED] <- nid=2 [audio output]
hdaa0: + [DISABLED] <- nid=11 [audio mixer]
hdaa0:
hdaa0: nid: 16 [DISABLED]
hdaa0: Name: vendor widget
hdaa0: Widget cap: 0x00f00000
hdaa0:
hdaa0: nid: 17 [DISABLED]
hdaa0: Name: vendor widget
hdaa0: Widget cap: 0x00f00000
hdaa0:
hdaa0: nid: 18 [DISABLED]
hdaa0: Name: pin: Speaker (None)
hdaa0: Widget cap: 0x0040000b
hdaa0: STEREO
hdaa0: Pin cap: 0x00000020
hdaa0: IN
hdaa0: Pin config: 0x411111f0
hdaa0: Pin control: 0x00000000
hdaa0: Input amp: 0x002f0300
hdaa0: mute=0 step=3 size=47 offset=0
hdaa0:
hdaa0: nid: 19 [DISABLED]
hdaa0: Name: vendor widget
hdaa0: Widget cap: 0x00f00000
hdaa0:
hdaa0: nid: 20 [DISABLED]
hdaa0: Name: pin: Speaker (None)
hdaa0: Widget cap: 0x0040018d
hdaa0: UNSOL STEREO
hdaa0: Pin cap: 0x00010014
hdaa0: PDC OUT EAPD
hdaa0: Pin config: 0x411111f0
hdaa0: Pin control: 0x00000000
hdaa0: EAPD: 0x00000002
hdaa0: Output amp: 0x80000000
hdaa0: mute=1 step=0 size=0 offset=0
hdaa0: connections: 2
hdaa0: |
hdaa0: + [DISABLED] <- nid=12 [audio mixer] (selected)
hdaa0: + <- nid=13 [audio mixer] [DISABLED]
hdaa0:
hdaa0: nid: 21 [DISABLED]
hdaa0: Name: vendor widget
hdaa0: Widget cap: 0x00f00000
hdaa0:
hdaa0: nid: 22 [DISABLED]
hdaa0: Name: vendor widget
hdaa0: Widget cap: 0x00f00000
hdaa0:
hdaa0: nid: 23 [DISABLED]
hdaa0: Name: pin: Speaker (None)
hdaa0: Widget cap: 0x0040010c
hdaa0: Pin cap: 0x00000010
hdaa0: OUT
hdaa0: Pin config: 0x411111f0
hdaa0: Pin control: 0x00000000
hdaa0: Output amp: 0x80000000
hdaa0: mute=1 step=0 size=0 offset=0
hdaa0: connections: 1
hdaa0: |
hdaa0: + [DISABLED] <- nid=15 [audio mixer] [DISABLED]
hdaa0:
hdaa0: nid: 24
hdaa0: Name: pin: Mic (Black Jack)
hdaa0: Widget cap: 0x0040018f
hdaa0: UNSOL STEREO
hdaa0: Association: 2 (0x00000001)
hdaa0: OSS: mic (mic)
hdaa0: Pin cap: 0x00001734
hdaa0: PDC OUT IN VREF[ 50 80 GROUND HIZ ]
hdaa0: Pin config: 0x04a11830
hdaa0: Pin control: 0x00000024 IN VREFs
hdaa0: Output amp: 0x80000000
hdaa0: mute=1 step=0 size=0 offset=0
hdaa0: Input amp: 0x002f0300
hdaa0: mute=0 step=3 size=47 offset=0
hdaa0: connections: 1
hdaa0: |
hdaa0: + [DISABLED] <- nid=13 [audio mixer] [DISABLED]
hdaa0:
hdaa0: nid: 25
hdaa0: Name: pin: Mic (Fixed)
hdaa0: Widget cap: 0x0040008b
hdaa0: UNSOL STEREO
hdaa0: Association: 2 (0x00008000)
hdaa0: OSS: monitor (monitor)
hdaa0: Pin cap: 0x00001724
hdaa0: PDC IN VREF[ 50 80 GROUND HIZ ]
hdaa0: Pin config: 0x99a3093f
hdaa0: Pin control: 0x00000024 IN VREFs
hdaa0: Input amp: 0x002f0300
hdaa0: mute=0 step=3 size=47 offset=0
hdaa0:
hdaa0: nid: 26 [DISABLED]
hdaa0: Name: pin: Speaker (None)
hdaa0: Widget cap: 0x0040018f
hdaa0: UNSOL STEREO
hdaa0: Pin cap: 0x0000003c
hdaa0: PDC HP OUT IN
hdaa0: Pin config: 0x411111f0
hdaa0: Pin control: 0x00000000
hdaa0: Output amp: 0x80000000
hdaa0: mute=1 step=0 size=0 offset=0
hdaa0: Input amp: 0x002f0300
hdaa0: mute=0 step=3 size=47 offset=0
hdaa0: connections: 2
hdaa0: |
hdaa0: + [DISABLED] <- nid=12 [audio mixer] (selected)
hdaa0: + <- nid=13 [audio mixer] [DISABLED]
hdaa0:
hdaa0: nid: 27
hdaa0: Name: pin: Speaker (Fixed)
hdaa0: Widget cap: 0x0040018f
hdaa0: UNSOL STEREO
hdaa0: Association: 0 (0x00000001)
hdaa0: Pin cap: 0x00000034
hdaa0: PDC OUT IN
hdaa0: Pin config: 0x99130110
hdaa0: Pin control: 0x00000040 OUT
hdaa0: Output amp: 0x80000000
hdaa0: mute=1 step=0 size=0 offset=0
hdaa0: Input amp: 0x002f0300
hdaa0: mute=0 step=3 size=47 offset=0
hdaa0: connections: 2
hdaa0: |
hdaa0: + <- nid=12 [audio mixer] (selected)
hdaa0: + [DISABLED] <- nid=13 [audio mixer] [DISABLED]
hdaa0:
hdaa0: nid: 28 [DISABLED]
hdaa0: Name: vendor widget
hdaa0: Widget cap: 0x00f00000
hdaa0:
hdaa0: nid: 29
hdaa0: Name: beep widget
hdaa0: Widget cap: 0x00700000
hdaa0: Association: -2 (0x00000000)
hdaa0: OSS: speaker (speaker)
hdaa0: Pin cap: 0x00000020
hdaa0: IN
hdaa0: Pin config: 0x40079a2d
hdaa0: Pin control: 0x00000020 IN
hdaa0:
hdaa0: nid: 30
hdaa0: Name: pin: SPDIF-out (Fixed)
hdaa0: Widget cap: 0x00400381
hdaa0: DIGITAL UNSOL STEREO
hdaa0: Association: 1 (0x00000001)
hdaa0: Pin cap: 0x00000014
hdaa0: PDC OUT
hdaa0: Pin config: 0x99430120
hdaa0: Pin control: 0x00000040 OUT
hdaa0: connections: 1
hdaa0: |
hdaa0: + <- nid=6 [audio output]
hdaa0:
hdaa0: nid: 31 [DISABLED]
hdaa0: Name: vendor widget
hdaa0: Widget cap: 0x00f00000
hdaa0:
hdaa0: nid: 32 [DISABLED]
hdaa0: Name: vendor widget
hdaa0: Widget cap: 0x00f00040
hdaa0: PROC
hdaa0:
hdaa0: nid: 33
hdaa0: Name: pin: Headphones (Black Jack)
hdaa0: Widget cap: 0x0040018d
hdaa0: UNSOL STEREO
hdaa0: Association: 0 (0x00008000)
hdaa0: Pin cap: 0x0000001c
hdaa0: PDC HP OUT
hdaa0: Pin config: 0x0421101f
hdaa0: Pin control: 0x000000c0 HP OUT
hdaa0: Output amp: 0x80000000
hdaa0: mute=1 step=0 size=0 offset=0
hdaa0: connections: 2
hdaa0: |
hdaa0: + <- nid=12 [audio mixer] (selected)
hdaa0: + [DISABLED] <- nid=13 [audio mixer] [DISABLED]
hdaa0:
hdaa0: nid: 34 [DISABLED]
hdaa0: Name: audio selector
hdaa0: Widget cap: 0x0030010b
hdaa0: STEREO
hdaa0: connections: 7
hdaa0: |
hdaa0: + <- nid=24 [pin: Mic (Black Jack)] (selected)
hdaa0: + <- nid=25 [pin: Mic (Fixed)]
hdaa0: + [DISABLED] <- nid=26 [pin: Speaker (None)] [DISABLED]
hdaa0: + <- nid=27 [pin: Speaker (Fixed)]
hdaa0: + <- nid=29 [beep widget]
hdaa0: + <- nid=11 [audio mixer]
hdaa0: + [DISABLED] <- nid=18 [pin: Speaker (None)] [DISABLED]
hdaa0:
hdaa0: nid: 35
hdaa0: Name: audio mixer
hdaa0: Widget cap: 0x0020010b
hdaa0: STEREO
hdaa0: Association: 2 (0x00008001)
hdaa0: OSS: speaker, mic, mix, monitor
hdaa0: Input amp: 0x80000000
hdaa0: mute=1 step=0 size=0 offset=0
hdaa0: connections: 6
hdaa0: |
hdaa0: + <- nid=24 [pin: Mic (Black Jack)]
hdaa0: + <- nid=25 [pin: Mic (Fixed)]
hdaa0: + [DISABLED] <- nid=26 [pin: Speaker (None)] [DISABLED]
hdaa0: + [DISABLED] <- nid=27 [pin: Speaker (Fixed)]
hdaa0: + <- nid=29 [beep widget]
hdaa0: + <- nid=11 [audio mixer]
hdaa0:
pcm0: <Realtek ALC269 HDA CODEC PCM (Analog 2.0+HP/2.0)> at nid 27,33 and
24,25 on hdaa0
pcm0: +--------------------------------------+
pcm0: | DUMPING PCM Playback/Record Channels |
pcm0: +--------------------------------------+
pcm0:
pcm0: Playback:
pcm0:
pcm0: Stream cap: 0x00000001
pcm0: PCM
pcm0: PCM cap: 0x000e0560
pcm0: 16 20 24 bits, 44 48 96 192 KHz
pcm0: DAC: 2
pcm0:
pcm0: Record:
pcm0:
pcm0: Stream cap: 0x00000001
pcm0: PCM
pcm0: PCM cap: 0x000e0560
pcm0: 16 20 24 bits, 44 48 96 192 KHz
pcm0: DAC: 8
pcm0:
pcm0: +-------------------------------+
pcm0: | DUMPING Playback/Record Paths |
pcm0: +-------------------------------+
pcm0:
pcm0: Playback:
pcm0:
pcm0: nid=27 [pin: Speaker (Fixed)]
pcm0: |
pcm0: + <- nid=12 [audio mixer] [src: pcm, mix]
pcm0: |
pcm0: + <- nid=2 [audio output] [src: pcm]
pcm0: + <- nid=11 [audio mixer] [src: mix]
pcm0:
pcm0: nid=33 [pin: Headphones (Black Jack)]
pcm0: |
pcm0: + <- nid=12 [audio mixer] [src: pcm, mix]
pcm0: |
pcm0: + <- nid=2 [audio output] [src: pcm]
pcm0: + <- nid=11 [audio mixer] [src: mix]
pcm0:
pcm0: Record:
pcm0:
pcm0: nid=8 [audio input]
pcm0: |
pcm0: + <- nid=35 [audio mixer] [src: speaker, mic, mix, monitor]
pcm0: |
pcm0: + <- nid=24 [pin: Mic (Black Jack)] [src: mic]
pcm0: + <- nid=25 [pin: Mic (Fixed)] [src: monitor]
pcm0: + <- nid=29 [beep widget] [src: speaker]
pcm0: + <- nid=11 [audio mixer] [src: mix]
pcm0:
pcm0: Input Mix:
pcm0:
pcm0: nid=11 [audio mixer]
pcm0: |
pcm0: + <- nid=24 [pin: Mic (Black Jack)] [src: mic]
pcm0: + <- nid=25 [pin: Mic (Fixed)] [src: monitor]
pcm0: + <- nid=29 [beep widget] [src: speaker]
pcm0:
pcm0: +-------------------------+
pcm0: | DUMPING Volume Controls |
pcm0: +-------------------------+
pcm0:
pcm0: Master Volume (OSS: vol): -65/0dB
pcm0: |
pcm0: +- ctl 1 (nid 2 out): -65/0dB (88 steps)
pcm0: +- ctl 10 (nid 12 in 0): mute
pcm0: +- ctl 11 (nid 12 in 1): mute
pcm0: +- ctl 24 (nid 27 in ): mute
pcm0: +- ctl 26 (nid 33 in ): mute
pcm0:
pcm0: PCM Volume (OSS: pcm): -65/0dB
pcm0: |
pcm0: +- ctl 1 (nid 2 out): -65/0dB (88 steps)
pcm0: +- ctl 10 (nid 12 in 0): mute
pcm0:
pcm0: Microphone Volume (OSS: mic): 0/36dB
pcm0: |
pcm0: +- ctl 5 (nid 11 in 0): -34/12dB (32 steps) + mute
pcm0: +- ctl 20 (nid 24 out): 0/36dB (4 steps)
pcm0: +- ctl 27 (nid 35 in 0): mute
pcm0:
pcm0: Microphone2 Volume (OSS: monitor): 0/36dB
pcm0: |
pcm0: +- ctl 6 (nid 11 in 1): -34/12dB (32 steps) + mute
pcm0: +- ctl 21 (nid 25 out): 0/36dB (4 steps)
pcm0: +- ctl 28 (nid 35 in 1): mute
pcm0:
pcm0: Speaker/Beep Volume (OSS: speaker): -34/12dB
pcm0: |
pcm0: +- ctl 9 (nid 11 in 4): -34/12dB (32 steps) + mute
pcm0: +- ctl 31 (nid 35 in 4): mute
pcm0:
pcm0: Recording Level (OSS: rec): -16/30dB
pcm0: |
pcm0: +- ctl 3 (nid 8 in 0): -16/30dB (32 steps) + mute
pcm0: +- ctl 27 (nid 35 in 0): mute
pcm0: +- ctl 28 (nid 35 in 1): mute
pcm0: +- ctl 31 (nid 35 in 4): mute
pcm0: +- ctl 32 (nid 35 in 5): mute
pcm0:
pcm0: Input Mix Level (OSS: mix): -34/12dB
pcm0: |
pcm0: +- ctl 5 (nid 11 in 0): -34/12dB (32 steps) + mute
pcm0: +- ctl 6 (nid 11 in 1): -34/12dB (32 steps) + mute
pcm0: +- ctl 9 (nid 11 in 4): -34/12dB (32 steps) + mute
pcm0: +- ctl 11 (nid 12 in 1): mute
pcm0: +- ctl 32 (nid 35 in 5): mute
pcm0:
pcm0: Input Monitoring Level (OSS: igain): 0/0dB
pcm0: |
pcm0: +- ctl 11 (nid 12 in 1): mute
pcm0:
pcm0: Mixer "vol":
pcm0: Mixer "pcm":
pcm0: Mixer "speaker":
pcm0: Mixer "mic":
pcm0: Mixer "mix":
pcm0: Mixer "rec":
pcm0: Mixer "igain":
pcm0: Mixer "monitor":
pcm0: clone manager: deadline=750ms flags=0x8000001e
pcm0: sndbuf_setmap 14f780000, 10000; 0xffffff81133a1000 -> 14f780000
pcm0: sndbuf_setmap 5ac0000, 10000; 0xffffff81133e1000 -> 5ac0000
pcm0: Automatically set rec source to: monitor
pcm1: <Realtek ALC269 HDA CODEC PCM (Onboard Digital)> at nid 30 on hdaa0
pcm1: +--------------------------------------+
pcm1: | DUMPING PCM Playback/Record Channels |
pcm1: +--------------------------------------+
pcm1:
pcm1: Playback:
pcm1:
pcm1: Stream cap: 0x00000005
pcm1: AC3 PCM
pcm1: PCM cap: 0x000e05e0
pcm1: 16 20 24 bits, 44 48 88 96 192 KHz
pcm1: DAC: 6
pcm1:
pcm1: +-------------------------------+
pcm1: | DUMPING Playback/Record Paths |
pcm1: +-------------------------------+
pcm1:
pcm1: Playback:
pcm1:
pcm1: nid=30 [pin: SPDIF-out (Fixed)]
pcm1: |
pcm1: + <- nid=6 [audio output] [src: pcm]
pcm1:
pcm1: +-------------------------+
pcm1: | DUMPING Volume Controls |
pcm1: +-------------------------+
pcm1:
pcm1: Mixer "vol" -> "none": child=0x00000010
pcm1: Mixer "pcm": parent="vol"
pcm1: Soft PCM mixer ENABLED
pcm1: clone manager: deadline=750ms flags=0x8000001e
pcm1: sndbuf_setmap 1780000, 10000; 0xffffff8113421000 -> 1780000
hdacc1: <Intel Cougar Point HDA CODEC> at cad 3 on hdac0
hdacc1: Root Node at nid=0: 1 subnodes 1-1
hdaa1: <Intel Cougar Point HDA CODEC Audio Function Group> at nid 1 on
hdacc1
hdaa1: Audio Function Group at nid=1: 7 subnodes 2-8
hdaa1: NumGPIO=0 NumGPO=0 NumGPI=0 GPIWake=0 GPIUnsol=0
hdaa1: Original pins configuration:
hdaa1: nid 0x as seq device conn jack loc color misc
hdaa1: 5 58560010 1 0 Digital-out None Digital 0x18 Unknown 0
hdaa1: 6 18560020 2 0 Digital-out Jack Digital 0x18 Unknown 0
hdaa1: 7 58560030 3 0 Digital-out None Digital 0x18 Unknown 0
hdaa1: Patched pins configuration:
hdaa1: nid 0x as seq device conn jack loc color misc
hdaa1: 5 58560010 1 0 Digital-out None Digital 0x18 Unknown 0
DISA
hdaa1: 6 18560020 2 0 Digital-out Jack Digital 0x18 Unknown 0
hdaa1: 7 58560030 3 0 Digital-out None Digital 0x18 Unknown 0
DISA
hdaa1: 1 associations found:
hdaa1: Association 0 (2) out:
hdaa1: Pin nid=6 seq=0
hdaa1: Tracing association 0 (2)
hdaa1: Pin 6 traced to DAC 3
hdaa1: Association 0 (2) trace succeeded
hdaa1: Looking for additional DAC for association 0 (2)
hdaa1: Tracing input monitor
hdaa1: Tracing other input monitors
hdaa1: Tracing beeper
hdaa1: FG config/quirks: forcestereo ivref50 ivref80 ivref100 ivref
hdaa1:
hdaa1: +-------------------+
hdaa1: | DUMPING HDA NODES |
hdaa1: +-------------------+
hdaa1:
hdaa1: Default Parameter
hdaa1: -----------------
hdaa1: IN amp: 0x00000000
hdaa1: OUT amp: 0x00000000
hdaa1:
hdaa1: nid: 2 [DISABLED]
hdaa1: Name: audio output
hdaa1: Widget cap: 0x00006611
hdaa1: PWR DIGITAL 8CH
hdaa1: Stream cap: 0x00000005
hdaa1: AC3 PCM
hdaa1: PCM cap: 0x001e07f0
hdaa1: 16 20 24 32 bits, 32 44 48 88 96 176 192 KHz
hdaa1:
hdaa1: nid: 3
hdaa1: Name: audio output
hdaa1: Widget cap: 0x00006611
hdaa1: PWR DIGITAL 8CH
hdaa1: Association: 0 (0x00000001)
hdaa1: OSS: pcm (pcm)
hdaa1: Stream cap: 0x00000005
hdaa1: AC3 PCM
hdaa1: PCM cap: 0x001e07f0
hdaa1: 16 20 24 32 bits, 32 44 48 88 96 176 192 KHz
hdaa1:
hdaa1: nid: 4 [DISABLED]
hdaa1: Name: audio output
hdaa1: Widget cap: 0x00006611
hdaa1: PWR DIGITAL 8CH
hdaa1: Stream cap: 0x00000005
hdaa1: AC3 PCM
hdaa1: PCM cap: 0x001e07f0
hdaa1: 16 20 24 32 bits, 32 44 48 88 96 176 192 KHz
hdaa1:
hdaa1: nid: 5 [DISABLED]
hdaa1: Name: pin: Digital-out (None)
hdaa1: Widget cap: 0x0040778d
hdaa1: PWR DIGITAL UNSOL 8CH
hdaa1: Pin cap: 0x09000094
hdaa1: PDC OUT HDMI DP HBR
hdaa1: Pin config: 0x58560010
hdaa1: Pin control: 0x00000000
hdaa1: Output amp: 0x80000000
hdaa1: mute=1 step=0 size=0 offset=0
hdaa1: connections: 1
hdaa1: |
hdaa1: + [DISABLED] <- nid=2 [audio output] [DISABLED]
hdaa1:
hdaa1: nid: 6
hdaa1: Name: pin: Digital-out (Jack)
hdaa1: Widget cap: 0x0040778d
hdaa1: PWR DIGITAL UNSOL 8CH
hdaa1: Association: 0 (0x00000001)
hdaa1: Pin cap: 0x09000094
hdaa1: PDC OUT HDMI DP HBR
hdaa1: Pin config: 0x18560020
hdaa1: Pin control: 0x00000040 OUT
hdaa1: Output amp: 0x80000000
hdaa1: mute=1 step=0 size=0 offset=0
hdaa1: connections: 1
hdaa1: |
hdaa1: + <- nid=3 [audio output]
hdaa1:
hdaa1: nid: 7 [DISABLED]
hdaa1: Name: pin: Digital-out (None)
hdaa1: Widget cap: 0x0040778d
hdaa1: PWR DIGITAL UNSOL 8CH
hdaa1: Pin cap: 0x09000094
hdaa1: PDC OUT HDMI DP HBR
hdaa1: Pin config: 0x58560030
hdaa1: Pin control: 0x00000000
hdaa1: Output amp: 0x80000000
hdaa1: mute=1 step=0 size=0 offset=0
hdaa1: connections: 1
hdaa1: |
hdaa1: + [DISABLED] <- nid=4 [audio output] [DISABLED]
hdaa1:
hdaa1: nid: 8 [DISABLED]
hdaa1: Name: vendor widget
hdaa1: Widget cap: 0x00f00000
hdaa1:
pcm2: <Intel Cougar Point HDA CODEC PCM (HDMI/DP 8ch)> at nid 6 on hdaa1
pcm2: +--------------------------------------+
pcm2: | DUMPING PCM Playback/Record Channels |
pcm2: +--------------------------------------+
pcm2:
pcm2: Playback:
pcm2:
pcm2: Stream cap: 0x00000005
pcm2: AC3 PCM
pcm2: PCM cap: 0x001e07f0
pcm2: 16 20 24 32 bits, 32 44 48 88 96 176 192 KHz
pcm2: DAC: 3
pcm2:
pcm2: +-------------------------------+
pcm2: | DUMPING Playback/Record Paths |
pcm2: +-------------------------------+
pcm2:
pcm2: Playback:
pcm2:
pcm2: nid=6 [pin: Digital-out (Jack)]
pcm2: |
pcm2: + <- nid=3 [audio output] [src: pcm]
pcm2:
pcm2: +-------------------------+
pcm2: | DUMPING Volume Controls |
pcm2: +-------------------------+
pcm2:
pcm2: Master Volume (OSS: vol): 0/0dB
pcm2: |
pcm2: +- ctl 2 (nid 6 in ): mute
pcm2:
pcm2: PCM Volume (OSS: pcm): 0/0dB
pcm2: |
pcm2: +- ctl 2 (nid 6 in ): mute
pcm2:
pcm2: Mixer "vol":
pcm2: Mixer "pcm":
pcm2: Soft PCM mixer ENABLED
pcm2: clone manager: deadline=750ms flags=0x8000001e
pcm2: sndbuf_setmap 17c0000, 10000; 0xffffff8113461000 -> 17c0000
usbus0: 480Mbps High Speed USB v2.0
usbus1: 5.0Gbps Super Speed USB v3.0
usbus2: 480Mbps High Speed USB v2.0
ahcich0: AHCI reset...
ahcich0: SATA connect time=900us status=00000123
ahcich0: AHCI reset: device found
ahcich2: AHCI reset...
ahcich2: SATA connect time=900us status=00000113
ahcich2: AHCI reset: device found
ahcich2: AHCI reset: device ready after 0ms
(aprobe1:ahcich2:0:0:0): SIGNATURE: eb14
acpi_acad0: acline initialization start
system power profile changed to 'economy'
acpi_acad0: Off Line
ugen0.1: <Intel> at usbus0
uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
ugen1.1: <0x1b73> at usbus1
uhub1: <0x1b73 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1
ugen2.1: <Intel> at usbus2
uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
acpi_acad0: acline initialization done, tried 1 times
battery0: battery initialization start
battery0: battery initialization done, tried 1 times
ahcich0: AHCI reset: device ready after 100ms
(aprobe0:ahcich0:0:0:0): SIGNATURE: 0000
uhub1: 2 ports with 2 removable, self powered
uhub0: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
ugen0.2: <vendor 0x8087> at usbus0
uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on
usbus0
ugen2.2: <vendor 0x8087> at usbus2
uhub4: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on
usbus2
ugen1.2: <Seagate> at usbus1
umass0: <Seagate FA GoFlex Desk, class 0/0, rev 3.00/1.00, addr 1> on usbus1
umass0: SCSI over Bulk-Only; quirks = 0x4100
umass0:3:0:-1: Attached to scbus3
uhub3: 6 ports with 6 removable, self powered
uhub4: 6 ports with 6 removable, self powered
ugen0.3: <vendor 0x13d3> at usbus0
(probe0:ctl2cam0:0:1:0): Error 6, Unretryable error
(probe1:umass-sim0:0:0:0): Down reving Protocol Version from 2 to 0?
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <ST9640320AS 0002SDM1> ATA-8 SATA 2.x device
ada0: Serial Number 5WX25PJC
ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 610480MB (1250263728 512 byte sectors: 16H 63S/T 16383C)
ada0: Previously was known as ad4
GEOM: new disk ada0
GEOM: new disk da0
da0 at umass-sim0 bus 0 scbus3 target 0 lun 0
da0: <Seagate FA GoFlex Desk 0D12> Fixed Direct Access SCSI-0 device
da0: Serial Number NA0L1T1V
da0: 400.000MB/s transfers
da0: 1907729MB (3907029167 512 byte sectors: 255H 63S/T 243201C)
pass0 at ahcich0 bus 0 scbus0 target 0 lun 0
pass0: <ST9640320AS 0002SDM1> ATA-8 SATA 2.x device
pass0: Serial Number 5WX25PJC
pass0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
pass0: Command Queueing enabled
(cd0:ahcich2:0:0:0): SCSI status error
(cd0:ahcich2:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
(cd0:ahcich2:0:0:0): CAM status: SCSI Status Error
(cd0:ahcich2:0:0:0): SCSI status: Check Condition
(cd0:ahcich2:0:0:0): SCSI sense: NOT READY asc:3a,1 (Medium not present -
tray closed)
(cd0:ahcich2:0:0:0): Error 6, Unretryable error
cd0 at ahcich2 bus 0 scbus1 target 0 lun 0
cd0: <MATSHITA DVD-RAM UJ8A0ASW 1.01> Removable CD-ROM SCSI-0 device
cd0: Serial Number YK81 021672
cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes)
cd0: Attempt to query device size failed: NOT READY, Medium not present -
tray closed
pass1 at ahcich2 bus 0 scbus1 target 0 lun 0
pass1: <MATSHITA DVD-RAM UJ8A0ASW 1.01> Removable CD-ROM SCSI-0 device
pass1: Serial Number YK81 021672
pass1: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes)
pass2 at umass-sim0 bus 0 scbus3 target 0 lun 0
pass2: <Seagate FA GoFlex Desk 0D12> Fixed Direct Access SCSI-0 device
pass2: Serial Number NA0L1T1V
pass2: 400.000MB/s transfers
lapic4: CMCI unmasked
lapic5: CMCI unmasked
lapic2: CMCI unmasked
lapic3: CMCI unmasked
lapic7: CMCI unmasked
lapic6: CMCI unmasked
SMP: AP CPU #1 Launched!
cpu1 AP:
ID: 0x01000000 VER: 0x01060015 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
cmci: 0x000100f2
SMP: AP CPU #7 Launched!
cpu7 AP:
ID: 0x07000000 VER: 0x01060015 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
cmci: 0x000000f2
SMP: AP CPU #4 Launched!
cpu4 AP:
ID: 0x04000000 VER: 0x01060015 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
cmci: 0x000000f2
SMP: AP CPU #6 Launched!
cpu6 AP:
ID: 0x06000000 VER: 0x01060015 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
cmci: 0x000000f2
SMP: AP CPU #5 Launched!
cpu5 AP:
ID: 0x05000000 VER: 0x01060015 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
cmci: 0x000000f2
SMP: AP CPU #2 Launched!
cpu2 AP:
ID: 0x02000000 VER: 0x01060015 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
cmci: 0x000000f2
SMP: AP CPU #3 Launched!
cpu3 AP:
ID: 0x03000000 VER: 0x01060015 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
cmci: 0x000000f2
msi: Assigning MSI-X IRQ 257 to local APIC 1 vector 48
msi: Assigning MSI-X IRQ 258 to local APIC 2 vector 48
msi: Assigning MSI-X IRQ 259 to local APIC 3 vector 48
msi: Assigning MSI-X IRQ 260 to local APIC 4 vector 48
msi: Assigning MSI-X IRQ 261 to local APIC 5 vector 48
msi: Assigning MSI-X IRQ 262 to local APIC 6 vector 48
msi: Assigning MSI-X IRQ 263 to local APIC 7 vector 48
SMP: passed TSC synchronization test
TSC timecounter discards lower 7 bit(s)
Timecounter "TSC-low" frequency 15589903 Hz quality 1000
WARNING: WITNESS option enabled, expect reduced performance.
GEOM: new disk cd0
ugen0.4: <USB2.0 UVC 2M WebCam> at usbus0
(cd0:ahcich2:0:0:0): SCSI status error
(cd0:ahcich2:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
(cd0:ahcich2:0:0:0): CAM status: SCSI Status Error
(cd0:ahcich2:0:0:0): SCSI status: Check Condition
(cd0:ahcich2:0:0:0): SCSI sense: NOT READY asc:3a,1 (Medium not present -
tray closed)
(cd0:ahcich2:0:0:0): Error 6, Unretryable error
(cd0:ahcich2:0:0:0): SCSI status error
(cd0:ahcich2:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
(cd0:ahcich2:0:0:0): CAM status: SCSI Status Error
(cd0:ahcich2:0:0:0): SCSI status: Check Condition
(cd0:ahcich2:0:0:0): SCSI sense: NOT READY asc:3a,1 (Medium not present -
tray closed)
(cd0:ahcich2:0:0:0): Error 6, Unretryable error
(cd0:ahcich2:0:0:0): SCSI status error
(cd0:ahcich2:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
(cd0:ahcich2:0:0:0): CAM status: SCSI Status Error
(cd0:ahcich2:0:0:0): SCSI status: Check Condition
(cd0:ahcich2:0:0:0): SCSI sense: NOT READY asc:3a,1 (Medium not present -
tray closed)
(cd0:ahcich2:0:0:0): Error 6, Unretryable error
Trying to mount root from ufs:/dev/ada0p2 [rw]...
start_init: trying /sbin/init
wlan0: bpf attached
wlan0: bpf attached
wlan0: Ethernet address: 74:2f:68:3d:05:69
ubt0: <vendor 0x13d3 product 0x3304, class 224/1, rev 1.10/0.01, addr 3> on
usbus0
WARNING: attempt to domain_add(bluetooth) after domainfinalize()
WARNING: attempt to domain_add(netgraph) after domainfinalize()
ubt0: ubt_bulk_read_callback:867: bulk-in transfer failed: USB_ERR_STALLED
ubt0: ubt_intr_read_callback:767: interrupt transfer failed: USB_ERR_STALLED
ubt0: ubt_bulk_read_callback:867: bulk-in transfer failed: USB_ERR_STALLED
ubt0: ubt_intr_read_callback:767: interrupt transfer failed: USB_ERR_STALLED
ubt0: ubt_bulk_read_callback:867: bulk-in transfer failed: USB_ERR_STALLED
ubt0: ubt_intr_read_callback:767: interrupt transfer failed: USB_ERR_STALLED
ubt0: ubt_bulk_read_callback:867: bulk-in transfer failed: USB_ERR_STALLED
ubt0: ubt_intr_read_callback:767: interrupt transfer failed: USB_ERR_STALLED
ubt0: ubt_bulk_read_callback:867: bulk-in transfer failed: USB_ERR_STALLED
ubt0: ubt_intr_read_callback:767: interrupt transfer failed: USB_ERR_STALLED
ubt0: ubt_bulk_read_callback:867: bulk-in transfer failed: USB_ERR_STALLED
ubt0: ubt_intr_read_callback:767: interrupt transfer failed: USB_ERR_STALLED
ubt0: ubt_bulk_read_callback:867: bulk-in transfer failed: USB_ERR_STALLED
ubt0: ubt_intr_read_callback:767: interrupt transfer failed: USB_ERR_STALLED
ubt0: ubt_bulk_read_callback:867: bulk-in transfer failed: USB_ERR_STALLED
ubt0: ubt_intr_read_callback:767: interrupt transfer failed: USB_ERR_STALLED
ubt0: ubt_bulk_read_callback:867: bulk-in transfer failed: USB_ERR_STALLED
ubt0: ubt_intr_read_callback:767: interrupt transfer failed: USB_ERR_STALLED
ubt0: ubt_bulk_read_callback:867: bulk-in transfer failed: USB_ERR_STALLED
ubt0: ubt_intr_read_callback:767: interrupt transfer failed: USB_ERR_STALLED
ubt0: ubt_bulk_read_callback:867: bulk-in transfer failed: USB_ERR_STALLED
ubt0: ubt_intr_read_callback:767: interrupt transfer failed: USB_ERR_STALLED
ubt0: ubt_bulk_read_callback:867: bulk-in transfer failed: USB_ERR_STALLED
ubt0: ubt_intr_read_callback:767: interrupt transfer failed: USB_ERR_STALLED
ubt0: ubt_bulk_read_callback:867: bulk-in transfer failed: USB_ERR_STALLED
ubt0: ubt_intr_read_callback:767: interrupt transfer failed: USB_ERR_STALLED
ubt0: ubt_bulk_read_callback:867: bulk-in transfer failed: USB_ERR_STALLED
ubt0: ubt_intr_read_callback:767: interrupt transfer failed: USB_ERR_STALLED
ubt0: ubt_bulk_read_callback:867: bulk-in transfer failed: USB_ERR_STALLED
ubt0: ubt_intr_read_callback:767: interrupt transfer failed: USB_ERR_STALLED
ubt0: ubt_bulk_read_callback:867: bulk-in transfer failed: USB_ERR_STALLED
ubt0: ubt_intr_read_callback:767: interrupt transfer failed: USB_ERR_STALLED
ubt0: ubt_bulk_read_callback:867: bulk-in transfer failed: USB_ERR_STALLED
ubt0: ubt_intr_read_callback:767: interrupt transfer failed: USB_ERR_STALLED
ubt0: ubt_bulk_read_callback:867: bulk-in transfer failed: USB_ERR_STALLED
ubt0: ubt_intr_read_callback:767: interrupt transfer failed: USB_ERR_STALLED
ubt0: ubt_bulk_read_callback:867: bulk-in transfer failed: USB_ERR_STALLED
ubt0: ubt_intr_read_callback:767: interrupt transfer failed: USB_ERR_STALLED
ubt0: ubt_bulk_read_callback:867: bulk-in transfer failed: USB_ERR_STALLED
ubt0: ubt_intr_read_callback:767: interrupt transfer failed: USB_ERR_STALLED
ubt0: ubt_bulk_read_callback:867: bulk-in transfer failed: USB_ERR_STALLED
ubt0: ubt_intr_read_callback:767: interrupt transfer failed: USB_ERR_STALLED
ubt0: ubt_bulk_read_callback:867: bulk-in transfer failed: USB_ERR_STALLED
ubt0: ubt_intr_read_callback:767: interrupt transfer failed: USB_ERR_STALLED
ubt0: ubt_bulk_read_callback:867: bulk-in transfer failed: USB_ERR_STALLED
ubt0: ubt_intr_read_callback:767: interrupt transfer failed: USB_ERR_STALLED
ubt0: ubt_bulk_read_callback:867: bulk-in transfer failed: USB_ERR_STALLED
ubt0: ubt_intr_read_callback:767: interrupt transfer failed: USB_ERR_STALLED
ubt0: ubt_bulk_read_callback:867: bulk-in transfer failed: USB_ERR_STALLED
ubt0: ubt_intr_read_callback:767: interrupt transfer failed: USB_ERR_STALLED
ubt0: ubt_bulk_read_callback:867: bulk-in transfer failed: USB_ERR_STALLED
ubt0: ubt_intr_read_callback:767: interrupt transfer failed: USB_ERR_STALLED
ubt0: ubt_bulk_read_callback:867: bulk-in transfer failed: USB_ERR_STALLED
ubt0: ubt_intr_read_callback:767: interrupt transfer failed: USB_ERR_STALLED
ubt0: ubt_bulk_read_callback:867: bulk-in transfer failed: USB_ERR_STALLED
ubt0: ubt_intr_read_callback:767: interrupt transfer failed: USB_ERR_STALLED
ubt0: ubt_bulk_read_callback:867: bulk-in transfer failed: USB_ERR_STALLED
ubt0: ubt_intr_read_callback:767: interrupt transfer failed: USB_ERR_STALLED
ubt0: ubt_bulk_read_callback:867: bulk-in transfer failed: USB_ERR_STALLED
ubt0: ubt_intr_read_callback:767: interrupt transfer failed: USB_ERR_STALLED
ubt0: ubt_bulk_read_callback:867: bulk-in transfer failed: USB_ERR_STALLED
ubt0: ubt_intr_read_callback:767: interrupt transfer failed: USB_ERR_STALLED
ubt0: ubt_bulk_read_callback:867: bulk-in transfer failed: USB_ERR_STALLED
ubt0: ubt_intr_read_callback:767: interrupt transfer failed: USB_ERR_STALLED
ubt0: ubt_bulk_read_callback:867: bulk-in transfer failed: USB_ERR_STALLED
ubt0: ubt_intr_read_callback:767: interrupt transfer failed: USB_ERR_STALLED
ubt0: ubt_bulk_read_callback:867: bulk-in transfer failed: USB_ERR_STALLED
ubt0: ubt_intr_read_callback:767: interrupt transfer failed: USB_ERR_STALLED
ubt0: ubt_bulk_read_callback:867: bulk-in transfer failed: USB_ERR_STALLED
ubt0: ubt_intr_read_callback:767: interrupt transfer failed: USB_ERR_STALLED
ubt0: ubt_bulk_read_callback:867: bulk-in transfer failed: USB_ERR_STALLED
ubt0: ubt_intr_read_callback:767: interrupt transfer failed: USB_ERR_STALLED
ubt0: ubt_bulk_read_callback:867: bulk-in transfer failed: USB_ERR_STALLED
ubt0: ubt_intr_read_callback:767: interrupt transfer failed: USB_ERR_STALLED
ubt0: ubt_bulk_read_callback:867: bulk-in transfer failed: USB_ERR_STALLED
ubt0: ubt_intr_read_callback:767: interrupt transfer failed: USB_ERR_STALLED
ubt0: ubt_bulk_read_callback:867: bulk-in transfer failed: USB_ERR_STALLED
ubt0: ubt_intr_read_callback:767: interrupt transfer failed: USB_ERR_STALLED
ubt0: ubt_bulk_read_callback:867: bulk-in transfer failed: USB_ERR_STALLED
ubt0: ubt_intr_read_callback:767: interrupt transfer failed: USB_ERR_STALLED
ubt0: ubt_bulk_read_callback:867: bulk-in transfer failed: USB_ERR_STALLED
ubt0: ubt_intr_read_callback:767: interrupt transfer failed: USB_ERR_STALLED
ubt0: ubt_bulk_read_callback:867: bulk-in transfer failed: USB_ERR_STALLED
ubt0: ubt_intr_read_callback:767: interrupt transfer failed: USB_ERR_STALLED
ubt0: ubt_bulk_read_callback:867: bulk-in transfer failed: USB_ERR_STALLED
ubt0: ubt_intr_read_callback:767: interrupt transfer failed: USB_ERR_STALLED
ubt0: ubt_bulk_read_callback:867: bulk-in transfer failed: USB_ERR_STALLED
ubt0: ubt_intr_read_callback:767: interrupt transfer failed: USB_ERR_STALLED
ubt0: ubt_bulk_read_callback:867: bulk-in transfer failed: USB_ERR_STALLED
ubt0: ubt_intr_read_callback:767: interrupt transfer failed: USB_ERR_STALLED
ubt0: ubt_bulk_read_callback:867: bulk-in transfer failed: USB_ERR_STALLED
ubt0: ubt_intr_read_callback:767: interrupt transfer failed: USB_ERR_STALLED
ubt0: ubt_bulk_read_callback:867: bulk-in transfer failed: USB_ERR_STALLED
ubt0: ubt_intr_read_callback:767: interrupt transfer failed: USB_ERR_STALLED
ubt0: ubt_bulk_read_callback:867: bulk-in transfer failed: USB_ERR_STALLED
ubt0: ubt_intr_read_callback:767: interrupt transfer failed: USB_ERR_STALLED
ubt0: ubt_bulk_read_callback:867: bulk-in transfer failed: USB_ERR_STALLED
ubt0: ubt_intr_read_callback:767: interrupt transfer failed: USB_ERR_STALLED
ubt0: ubt_bulk_read_callback:867: bulk-in transfer failed: USB_ERR_STALLED
ubt0: ubt_intr_read_callback:767: interrupt transfer failed: USB_ERR_STALLED
ubt0: ubt_bulk_read_callback:867: bulk-in transfer failed: USB_ERR_STALLED
ubt0: ubt_intr_read_callback:767: interrupt transfer failed: USB_ERR_STALLED
ubt0: ubt_bulk_read_callback:867: bulk-in transfer failed: USB_ERR_STALLED
ubt0: ubt_intr_read_callback:767: interrupt transfer failed: USB_ERR_STALLED
ng_hci_process_command_timeout: ubt0hci - unable to complete HCI command
OGF=0x3, OCF=0x3. Timeout
ubt0: ubt_bulk_read_callback:867: bulk-in transfer failed: USB_ERR_STALLED
ubt0: ubt_intr_read_callback:767: interrupt transfer failed: USB_ERR_STALLED
ubt0: ubt_bulk_read_callback:867: bulk-in transfer failed: USB_ERR_STALLED
ubt0: ubt_intr_read_callback:767: interrupt transfer failed: USB_ERR_STALLED
ubt0: ubt_bulk_read_callback:867: bulk-in transfer failed: USB_ERR_STALLED
ubt0: ubt_intr_read_callback:767: interrupt transfer failed: USB_ERR_STALLED
ubt0: ubt_bulk_read_callback:867: bulk-in transfer failed: USB_ERR_STALLED
ubt0: ubt_intr_read_callback:767: interrupt transfer failed: USB_ERR_STALLED
ubt0: ubt_bulk_read_callback:867: bulk-in transfer failed: USB_ERR_STALLED
ubt0: ubt_intr_read_callback:767: interrupt transfer failed: USB_ERR_STALLED
ubt0: ubt_bulk_read_callback:867: bulk-in transfer failed: USB_ERR_STALLED
ubt0: ubt_intr_read_callback:767: interrupt transfer failed: USB_ERR_STALLED
ubt0: ubt_bulk_read_callback:867: bulk-in transfer failed: USB_ERR_STALLED
ubt0: ubt_intr_read_callback:767: interrupt transfer failed: USB_ERR_STALLED
ubt0: ubt_bulk_read_callback:867: bulk-in transfer failed: USB_ERR_STALLED
ubt0: ubt_intr_read_callback:767: interrupt transfer failed: USB_ERR_STALLED
ubt0: ubt_bulk_read_callback:867: bulk-in transfer failed: USB_ERR_STALLED
ubt0: ubt_intr_read_callback:767: interrupt transfer failed: USB_ERR_STALLED
ubt0: ubt_bulk_read_callback:867: bulk-in transfer failed: USB_ERR_STALLED
ubt0: ubt_intr_read_callback:767: interrupt transfer failed: USB_ERR_STALLED
ubt0: ubt_bulk_read_callback:867: bulk-in transfer failed: USB_ERR_STALLED
Icarus#





> --HPS
>



--

Sam Fourman Jr.
Fourman Networks
http://www.fourmannetworks.com
0 new messages