sorry to bug you all ,      hoping someone will have a used or new
computer mouse with a "adns 3080 optical flow sensor"
an maybe willing to trade it for a quadcopter frame or somthen ,  cash !

   known mice with the  adns  3080 optical flow sensor

Logitech MX518
Everglide G 1000
A4 Tech X-780
Creative Fatal1ty 1010
Razer Dianondback

[image: Inline image 1]

adns_3080_logitech_mx518.jpg 219K Download

I believe I have 2 of the mice on that list. One had a broken button but
the optical sensor still worked. I'm willing to part with it. Let me double
check that it has the right sensor. I'll know by this afternoon.

woot !            thats cool as hell :)

the  quadframe works good ive just upgraded to a  bigger one ,   got tons
of other stuff too if your not interested in the frame ,      scooter parts
, IC's
  $

On Tue, Sep 11, 2012 at 12:04 PM, Nathan Armentrout <nrar...@gmail.com>wrote:

So, what're you hacking for?

Patrick McCarthy

T 502.476.9878
C 502.939.1756

From: lvl1@googlegroups.com [mailto:lvl1@googlegroups.com] On Behalf Of #
Sent: Tuesday, September 11, 2012 12:17 PM
To: lvl1@googlegroups.com
Subject: Re: {LVL1} Re: Trade quadcopter frame for optical flow sensor

woot !            thats cool as hell :)

the  quadframe works good ive just upgraded to a  bigger one ,   got tons of other stuff too if your not interested in the frame ,      scooter parts , IC's
  $

On Tue, Sep 11, 2012 at 12:04 PM, Nathan Armentrout <nrar...@gmail.com<mailto:nrar...@gmail.com>> wrote:
I believe I have 2 of the mice on that list. One had a broken button but the optical sensor still worked. I'm willing to part with it. Let me double check that it has the right sensor. I'll know by this afternoon.

   known mice with the  adns  3080 optical flow sensor

Logitech MX518
Everglide G 1000
A4 Tech X-780
Creative Fatal1ty 1010
Razer Dianondback

The information transmitted is intended only for the person or entity to which it is addressed
and may contain CONFIDENTIAL material. If you receive this material/information in error,
please contact the sender and delete or destroy the material/information.

  well,  ill show you when im done :)

I do in fact have the A3080 from a Fatality. It is currently at the space.
How can I get this to you? Also, I'd like to look at the quadcopter frame
or other ICs you have.

[image: Inline image 1] [image: Inline image 2] [image: Inline image 3]
[image: Inline image 4]

     im still taking it apart ,    i plan to leave the power distribution
board inside an lipo deans connector connected to the  power distribution
board,   you  just would need to solder esc's to it an your almost ready to
fly ,  \

       let me look though my shelves an ill right down all the ic's an
parts i have an willing to trade ,

    the optical flow sensor from a mouse will need more parts .
A complete soldered breakout board is bout 60$  but thats with pcb an focal
lens mounted with it ,

  tryin to get the sensor without spending more $  an since i have a new
Frame i have no use for this quadcopter i learned to fly with ,,  its tough
i built it so it could smash stuff other then its self ,  lol     believe
me it will lawn dart into the ground before breakin  ,

      very dangerous to be so strong since someones head probally give in
before it would , eek

    ive flown it with 10 inch props an 12 inch props ,   its more
*Agile*with 10 props but carries more with the 12 inch props ,
this frame
was my learning an testing frame

    *xcopterCalc* - Calculator for MultiCopter
http://www.ecalc.ch/xcoptercalc_e.htm

this will help you figure out which motors , props an esc to use for max
efficiency

as far meeting up so you can look at it ,   ill be glad to run it down
there or meet you somewhere ,    today i cant as i have my ride in pieces
on the floor ,  but if you would hold onto that sensor for me ill be
rolling again before end of the week,

On Tue, Sep 11, 2012 at 7:07 PM, Nathan Armentrout <nrar...@gmail.com>wrote:

quad3.jpg 364K Download

quad4.jpg 524K Download

quad2.jpg 422K Download

quad1.jpg 3412K Download

ic's

MAX7456  <---video overlay chip
MAX232   <---serial
MSP430 ez430_f2o13  <------ dev tool kit , unopened
LM5101B  <---AC/DC and DC/DC Power Supply
AMC1200 <-----Analog to Digital Converter
ULN2003  <------  High-Voltage High-Current Darlington Transistor Array
HEF4094BP <------ 8-stage shift-and-store bus register
Atmel 24C02 <------Two-wire Serial EEPROM

I'll trade for the MAX7456 :D

awesome , mang
      its cool i can show you  tons of infos an schematics and code for it
:)

   http://code.google.com/p/arducam-osd/wiki/minimosd   thats what i use it
for

    i havnt hooked the throttle cable up on my ride but anytime is cool ,,
ill meet you just about anyplace in louisville ,   woman is  having a
jewerly party an has the house off limits to me ,, lol or id invite you
over ,,

On Sun, Sep 16, 2012 at 10:53 AM, Nathan Armentrout <nrar...@gmail.com>wrote:

some examples
http://lowvoltagelabs.com/products/videooverlayshield/
http://www.mictronics.de/projects/remzibi-osd/
http://code.google.com/p/hazys-osd/
http://www.rcgroups.com/forums/showthread.php?t=1473207