I'll be there Thur, Fri and sat in the evening.
"Randy C." <jgz
...@gmail.com> wrote:
>Thanks,
>Unfortunately I could not be there as I work 12's and don't get off
>till midnight.
>When can I catch you Wed or this weekend?
>On Jan 8, 2:46 pm, JAC_101 <cabrera....@insightbb.com> wrote:
>> Randy,
>> I have some of the regulators. I'll bring them to the meeting tonight. I
>> check for other components to support the regulator and bring them if I
>> have them.
>> On Tuesday, January 8, 2013 12:10:16 PM UTC-5, Nathan Armentrout wrote:
>> > You need a 3.3V linear regulator.
>> > Sparkfun link to product:https://www.sparkfun.com/products/526
>> > These are very simple the hook up. I don't believe radioshack sells them
>> > and, to the best of my knowledge, the LVL1 store does not stock these
>> > either. Certainly there are a few Spacers who have some laying around.
>> > Unfortunately, I do not.
>> > On Tuesday, January 8, 2013 11:17:26 AM UTC-5, Randy C. wrote:
>> >> This is on the tenchi saber project again, which Jose is familiar
>> >> with...
>> >> Got the soundboard I needed in with a slight snag which I mentioned
>> >> last weekend, but
>> >> we got sidetracked and went to talking about the battery connections.
>> >> The problem being that
>> >> my lithium ion battery is putting out about 4.7 to 4V (full charge if
>> >> memory serves to mild use currently).
>> >> We had discussed resistors which I have for my LEDs, but Jose was
>> >> saying that just bleeds off the power,
>> >> and there would be a better alternative, but for the life of me, can't
>> >> recall what that was.
>> >> Here's the power spec page on the board.
>> >>http://i32.photobucket.com/albums/d1/GuardianZinv/boardspec1_zps80cab...
>> >>http://i32.photobucket.com/albums/d1/GuardianZinv/boardspec2_zps1bbc7...
>> >> Can someone direct me at what I'll need to drop the voltage properly
>> >> for this instance?
>> >> I'll have to run out to RadioShack on this side of the river to get it
>> >> tomorrow as that's my only
>> >> day left I can really work on the electronics. Hopefully this weekend
>> >> I can demo the saber properly
>> >> for those interested.
