Name [00000008] Intel(R) PRO/100 VE Network Connection
Adapter Type Ethernet 802.3
Product Type Intel(R) PRO/100 VE Network Connection
Installed Yes
PNP Device ID
PCI\VEN_8086&DEV_1050&SUBSYS_01551028&REV_02\4&1C660DD6&0&40F0
Last Reset 7/26/2003 7:01 AM
Index 8
Service Name E100B
IP Address 68.115.100.212
IP Subnet 255.255.240.0
Default IP Gateway 68.115.96.1
DHCP Enabled Yes
DHCP Server 24.159.193.41
DHCP Lease Expires 7/26/2003 7:01 PM
DHCP Lease Obtained 7/26/2003 7:01 AM
MAC Address 00:07:E9:6D:04:AE
Memory Address 0xFCFFF000-0xFCFFFFFF
I/O Port 0x0000DF40-0x0000DF7F
IRQ Channel IRQ 20
and well i have added fxp to my kernel and rebuilt it.
device fxp
but it doesnt see it. and when i do ifconfig fxp
it says no such device. i looked in src/pci for if_fxp.c and
if_fxpreg.h and if_fxpvar.h and nothing listed in there. i am in a
way new to freebsd well since 4.0. i would ever so grateful if you
could help me get my nic up and running. buying a dell with this
intergrated nic card has been a nightmare but there is nothing i can
do its on the board. and i love freebsd. if possible just the correct
steps to get it to see the card and have the driver installed. so i
can get online.
thank you for the time in reading this. it means the world to me.
michael quandt
email:napm...@mail.com
phone 507 529-9164
--
__________________________________________________________
Sign-up for your own FREE Personalized E-mail at Mail.com
http://www.mail.com/?sr=signup
CareerBuilder.com has over 400,000 jobs. Be smarter about your job search
http://corp.mail.com/careers
_______________________________________________
freebsd-...@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "freebsd-questi...@freebsd.org"
> and well i have added fxp to my kernel and rebuilt it.
> device fxp
fxp is already in the GENERIC kernel, did you take it out from your
kernel config?
Could you email your kernel config file, as well as the output from
dmesg after boot up?
Running ifconfig (without fxp) should list us all devices. I think your
card should be fxp0 not fxp.
--
"Optimized, readable, on time; Pick any two."
FreeBSD 5.1-CURRENT i386
10:41PM up 1 day, 13:33, 2 users, load averages: 0.34, 0.26, 0.22