Hi Geeta - wow, that is a blast from the past! Unfortunately, it was so long ago that I don't

Hello Thomas, I need to change the u-boot code to support the new mtd flash M25P128. I have seen that

Hi Yunus, I'm looking at it. What files do you need? thanks, Paul On Friday, April 15, 2016 at 10

did you ever get it to boot to command prompt? On Tuesday, March 27, 2012 8:03:09 AM UTC-4, Sexylinux

Can someone help me with linux stamp?, I'm making payment terminal and am thinking of going to

Hello Paul, I'm still fighting against OpenOCD and JTAG. I'm using your openocd configuration

Hello, Have you ever tried the Angstrom distribution on Linuxstamp 2? Best regards, Flavio -- Flavio

I think the important part is just the MT29f2G08, but you'd have to check the datasheets to be

Hi Andy, I got my boards back yesterday (I had to have the other chip desoldered) - I will be looking

On 12-03-29 11:04 AM, Paul Thomas wrote: > That should work. Are you doing the normal options ie

Hi Paul, Thanks for the response. I've now got my bootloader working partly, based on the AT91

Or this one: http://search.digikey.com/us/en/products/28500/28500-ND/2666943 Since it looks like the

Very Cool! On Thu, Feb 9, 2012 at 2:45 PM, Frank Olejnik <frank....@gmail.com> wrote: >

Hi there, I'm trying to enable the USB Device connection on the 9g20 Linuxstamp II so I can use

On 12-01-28 08:06 PM, Paul Thomas wrote: > You need access to the cable side of the the

Yeah it does look like a fs issue. You need more than just ubifs there's other ubi & nand

Hi Paul, I already tried that approach of ip=ip_address and it has not much change.. Here are the

Thank you! I found an older version out in the web-osphere but it is not as nice as this one. Chuckle

The embedded SAM-BA ROM code on the 9x25 chip switches to the internal 32 KHz RC oscillator (not

Just added the schematic and bill of materials to the github project. Same url as in previous post. -

Some nanny-bot replaced 'git' in the git clone line above with a url. Just type 'git'

I implemented a solution where I create a very small ramdisk Linux distribuition, booted from pen

Donna, If you want to build your own toolchain, crosstool-ng is highly recomended. Old crosstool

whewy. I got my wireless modem to work on my board. at least when I plug it in it comes up with this

oh, thanks for that, ugh, I had applied the patches to take it up to 2.6.36, but I forgot, I am going

Thx

Success! well, at least I finally got usbserial.ko to compile. There was a bunch of USBSerial stuff

On 11-10-07 10:59 AM, Paul Thomas wrote: > Here's the datasheet: > http://www.ftdichip.com/

One last thing, I think also that part of it was that vcore was not stable enough because I skimped

fine tweezers On Fri, Sep 16, 2011 at 1:44 AM, Victor <che...@gmail.com> wrote: > thanks