sudo nice -n -20 hdparm -tT /dev/[h,s]da? > ~/Desktop/discos.txt
sudo nice -n -20 hdparm -tTiI /dev/[h,s]da > ~/Desktop/discos2.txt
sudo fdisk -l > ~/Desktop/fdisk.txt
--
BUGabundo :o)
(``-_-´´)
GPG key 1024D/00967685
Linux user #443786
http://BUGabundo.net
http://BrinKadeiraS.BUGabundo.net
http://host.BUGabundo.net -- http://alojamento.BUGabundo.net
From 1€ / month
Crazy Domain Insane (200GB disk, 2TB bw, 6.00€ ($7.95)/month)
at http://www.dreamhost.com/r.cgi?249195/signup
50$ discount with promo code "BUG50" on all plans
Free lifetime domain with promo code "BUGDOMAIN"
Model=WDC WD800UE-22HCT0 , FwRev=09.07D09,
SerialNo= WD-WXE406031574
Config={ HardSect NotMFM HdSw>15uSec SpinMotCtl Fixed DTR>5Mbs
FmtGapReq }
RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=50
BuffType=unknown, BuffSize=2048kB, MaxMultSect=16, MultSect=?16?
CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=156301488
IORDY=on/off, tPIO={min:120,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio3 pio4
DMA modes: mdma0 mdma1 mdma2
UDMA modes: udma0 udma1 udma2 udma3 udma4 *udma5 udma3 udma4 *udma5
AdvancedPM=yes: unknown setting WriteCache=enabled
Drive conforms to: Unspecified: ATA/ATAPI-1 ATA/ATAPI-2 ATA/ATAPI-3
ATA/ATAPI-4 ATA/ATAPI-5 ATA/ATAPI-6
* signifies the current active mode
ATA device, with non-removable media
Model Number: WDC WD800UE-22HCT0
Serial Number: WD-WXE406031574
Firmware Revision: 09.07D09
Standards:
Supported: 6 5 4
Likely used: 6
Configuration:
Logical max current
cylinders 16383 16383
heads 16 16
sectors/track 63 63
--
CHS current addressable sectors: 16514064
LBA user addressable sectors: 156301488
device size with M = 1024*1024: 76319 MBytes
device size with M = 1000*1000: 80026 MBytes (80 GB)
Capabilities:
LBA, IORDY(can be disabled)
Standby timer values: spec'd by Standard, no device specific minimum
R/W multiple sector transfer: Max = 16 Current = 16
Advanced power management level: unknown setting (0x0080)
DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 *udma5
Cycle time: min=120ns recommended=120ns
PIO: pio0 pio1 pio2 pio3 pio4
Cycle time: no flow control=120ns IORDY flow control=120ns
Commands/features:
Enabled Supported:
* SMART feature set
Security Mode feature set
* Power Management feature set
* Write cache
* Look-ahead
* WRITE_BUFFER command
* READ_BUFFER command
* DOWNLOAD_MICROCODE
* Advanced Power Management feature set
* Device Configuration Overlay feature set
* Mandatory FLUSH_CACHE
* SMART error logging
* SMART self-test
Security:
supported
not enabled
not locked
frozen
not expired: security count
not supported: enhanced erase
HW reset results:
CBLID- above Vih
Device num = 0 determined by the jumper
Checksum: correct
Timing cached reads: 1056 MB in 2.00 seconds = 528.18 MB/sec
Timing buffered disk reads: 96 MB in 3.01 seconds = 31.94 MB/sec
/dev/sda1:
Timing cached reads: 1078 MB in 2.00 seconds = 538.64 MB/sec
Timing buffered disk reads: 40 MB in 3.10 seconds = 12.88 MB/sec
/dev/sda2:
Timing cached reads: 1062 MB in 2.00 seconds = 531.09 MB/sec
Timing buffered disk reads: 92 MB in 3.01 seconds = 30.56 MB/sec
/dev/sda3:
Timing cached reads: 1066 MB in 2.00 seconds = 532.88 MB/sec
Timing buffered disk reads: 82 MB in 3.06 seconds = 26.77 MB/sec
/dev/sda4:
Timing buffered disk reads:
/dev/sda5:
Timing cached reads: 1064 MB in 2.00 seconds = 531.50 MB/sec
Timing buffered disk reads: 88 MB in 3.12 seconds = 28.23 MB/sec
/dev/sda6:
Timing cached reads: 1060 MB in 2.00 seconds = 529.61 MB/sec
Timing buffered disk reads: 82 MB in 3.06 seconds = 26.82 MB/sec
Disk /dev/sda: 80.0 GB, 80026361856 bytes
255 heads, 63 sectors/track, 9729 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sda1 1 509 4088511 83 Linux
/dev/sda2 * 510 3732 25888747+ c W95 FAT32
(LBA)
/dev/sda3 5088 9729 37286865 c W95 FAT32
(LBA)
/dev/sda4 3733 5087 10884037+ 5 Extended
/dev/sda5 3733 4942 9719293+ 83 Linux
/dev/sda6 4943 5087 1164681 82 Linux swap /
Solaris
Partition table entries are not in disk order
Device Boot Start End Blocks Id System
/dev/sda1 * 1 1275 10241406 83 Linux
/dev/sda2 1276 7296 48363682+ 5 Extended
/dev/sda5 1276 7027 46202908+ 83 Linux
/dev/sda6 7028 7296 2160711 82 Linux swap / Solaris
/dev/sda:
ATA device, with non-removable media
Model Number: FUJITSU MHT2060AH
Firmware Revision: 006C
Standards:
Used: ATA/ATAPI-6 T13 1410D revision 3a
Supported: 6 5 4
Configuration:
Logical max current
cylinders 16383 16383
heads 16 16
sectors/track 63 63
--
CHS current addressable sectors: 16514064
LBA user addressable sectors: 117210240
device size with M = 1024*1024: 57231 MBytes
device size with M = 1000*1000: 60011 MBytes (60 GB)
Timing cached reads: 1534 MB in 2.00 seconds = 766.78 MB/sec
Timing buffered disk reads: 94 MB in 3.07 seconds = 30.63 MB/sec
/dev/sda1:
Timing cached reads: 1456 MB in 2.00 seconds = 727.89 MB/sec
Timing buffered disk reads: 88 MB in 3.03 seconds = 29.01 MB/sec
/dev/sda2:
Timing buffered disk reads:
/dev/sda5:
Timing cached reads: 1542 MB in 2.00 seconds = 771.29 MB/sec
Timing buffered disk reads: 90 MB in 3.05 seconds = 29.52 MB/sec
/dev/sda6:
Timing cached reads: 1518 MB in 2.00 seconds = 759.30 MB/sec
Timing buffered disk reads: 50 MB in 3.14 seconds = 15.93 MB/secv
> /dev/hdb1:
> Timing cached reads: 1112 MB in 2.00 seconds = 555.55 MB/sec
> Timing buffered disk reads: 108 MB in 3.02 seconds = 35.75 MB/sec
>
> /dev/hdb2:
> Timing cached reads: 1172 MB in 2.00 seconds = 586.07 MB/sec
> Timing buffered disk reads: 94 MB in 3.02 seconds = 31.09 MB/sec
>
> /dev/hdb3:
> Timing cached reads: 1148 MB in 2.00 seconds = 573.86 MB/sec
> Timing buffered disk reads: 132 MB in 3.02 seconds = 43.73 MB/sec
>
> /dev/hdb4:
> Timing cached reads: 1148 MB in 2.00 seconds = 573.99 MB/sec
> Timing buffered disk reads: 126 MB in 3.00 seconds = 41.99 MB/sec
>
>
> /dev/hdb:
>
> Model=ST3160021A, FwRev=8.01, SerialNo=5LJ0MNSN
> Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs RotSpdTol>.5% }
> RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=4
> BuffType=unknown, BuffSize=2048kB, MaxMultSect=16, MultSect=off
> CurCHS=4047/16/255, CurSects=16511760, LBA=yes, LBAsects=268435455
> IORDY=on/off, tPIO={min:240,w/IORDY:120}, tDMA={min:120,rec:120}
> PIO modes: pio0 pio1 pio2 pio3 pio4
> DMA modes: mdma0 mdma1 mdma2
> UDMA modes: udma0 udma1 udma2 udma3 udma4 *udma5 udma3 udma4 *udma5
> AdvancedPM=no WriteCache=enabled
> Drive conforms to: ATA/ATAPI-6 T13 1410D revision 2: ATA/ATAPI-1
> ATA/ATAPI-2 ATA/ATAPI-3 ATA/ATAPI-4 ATA/ATAPI-5 ATA/ATAPI-6
>
> * signifies the current active mode
>
>
> ATA device, with non-removable media
> Model Number: ST3160021A
> Serial Number: 5LJ0MNSN
> Firmware Revision: 8.01
> Standards:
> Used: ATA/ATAPI-6 T13 1410D revision 2
> Supported: 6 5 4
> Configuration:
> Logical max current
> cylinders 16383 4047
> heads 16 16
> sectors/track 63 255
> --
> CHS current addressable sectors: 16511760
> LBA user addressable sectors: 268435455
> LBA48 user addressable sectors: 312581808
> device size with M = 1024*1024: 152627 MBytes
> device size with M = 1000*1000: 160041 MBytes (160 GB)
> Capabilities:
> LBA, IORDY(can be disabled)
> Standby timer values: spec'd by Standard, no device specific minimum
> R/W multiple sector transfer: Max = 16 Current = ?
> Recommended acoustic management value: 128, current value: 0
> DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 *udma5
> Cycle time: min=120ns recommended=120ns
> PIO: pio0 pio1 pio2 pio3 pio4
> Cycle time: no flow control=240ns IORDY flow control=120ns
> Commands/features:
> Enabled Supported:
> SMART feature set
> Security Mode feature set
> * Power Management feature set
> * Write cache
> * Look-ahead
> * Host Protected Area feature set
> * WRITE_BUFFER command
> * READ_BUFFER command
> * DOWNLOAD_MICROCODE
> SET_MAX security extension
> * 48-bit Address feature set
> * Device Configuration Overlay feature set
> * Mandatory FLUSH_CACHE
> * FLUSH_CACHE_EXT
> * SMART error logging
> * SMART self-test
> * General Purpose Logging feature set
> unknown 84[11]
> unknown 84[12]
> Security:
> Master password revision code = 65534
> supported
> not enabled
> not locked
> not frozen
> not expired: security count
> not supported: enhanced erase
> HW reset results:
> CBLID- above Vih
> Device num = 1 determined by the jumper
> Checksum: correct
> Timing cached reads: 1192 MB in 2.00 seconds = 596.19 MB/sec
> Timing buffered disk reads: 130 MB in 3.04 seconds = 42.77 MB/sec
On 5/7/07, Telmo Morais <telmo....@gmail.com> wrote:
>
> Disk /dev/hda: 80.0 GB, 80026361856 bytes
> 255 heads, 63 sectors/track, 9729 cylinders
> Units = cylinders of 16065 * 512 = 8225280 bytes
>
> Device Boot Start End Blocks Id System
> /dev/hda1 * 1 2642 21221833+ 7 HPFS/NTFS
> /dev/hda2 9526 9729 1638630 12 Compaq
> diagnostics
> /dev/hda3 2643 9525 55287697+ f W95 Ext'd
> (LBA)
> /dev/hda5 2643 7864 41945683+ b W95 FAT32
> /dev/hda6 7865 7879 120456 83 Linux
> /dev/hda7 9348 9525 1429753+ 82 Linux swap /
> Solaris
> /dev/hda8 7880 9347 11791678+ 83 Linux
>
> Partition table entries are not in disk order
>
>
>
> /dev/hda1:
> Timing cached reads: 906 MB in 2.00 seconds = 452.69 MB/sec
> Timing buffered disk reads: 40 MB in 3.10 seconds = 12.90 MB/sec
>
> /dev/hda2:
> Timing cached reads: 1268 MB in 2.00 seconds = 634.03 MB/sec
> Timing buffered disk reads: 52 MB in 3.04 seconds = 17.12 MB/sec
>
> /dev/hda3:
> Timing buffered disk reads:
> /dev/hda5:
> Timing cached reads: 1284 MB in 2.00 seconds = 642.32 MB/sec
> Timing buffered disk reads: 88 MB in 3.03 seconds = 29.07 MB/sec
>
> /dev/hda6:
> Timing cached reads: 1298 MB in 2.00 seconds = 648.72 MB/sec
> Timing buffered disk reads: 64 MB in 3.04 seconds = 21.04 MB/sec
>
> /dev/hda7:
> Timing cached reads: 1284 MB in 2.00 seconds = 641.53 MB/sec
> Timing buffered disk reads: 50 MB in 3.09 seconds = 16.16 MB/sec
>
> /dev/hda8:
> Timing cached reads: 1296 MB in 2.00 seconds = 648.04 MB/sec
> Timing buffered disk reads: 54 MB in 3.09 seconds = 17.45 MB/sec
>
>
>
> /dev/hda:
>
> Model=TOSHIBA MK8032GAX, FwRev=AD001A, SerialNo=66TQ2738S
> Config={ Fixed }
> RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=0
> BuffType=unknown, BuffSize=0kB, MaxMultSect=16, MultSect=off
> CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=156301488
> IORDY=on/off, tPIO={min:120,w/IORDY:120}, tDMA={min:120,rec:120}
> PIO modes: pio0 pio1 pio2 pio3 pio4
> DMA modes: sdma0 sdma1 sdma2 mdma0 mdma1 mdma2
> UDMA modes: udma0 udma1 udma2 udma3 udma4 *udma5 udma3 udma4 *udma5
> AdvancedPM=yes: unknown setting WriteCache=enabled
> Drive conforms to: Unspecified: ATA/ATAPI-1 ATA/ATAPI-2 ATA/ATAPI-3
> ATA/ATAPI-4 ATA/ATAPI-5 ATA/ATAPI-6
>
> * signifies the current active mode
>
>
> ATA device, with non-removable media
> Model Number: TOSHIBA MK8032GAX
> Serial Number: 66TQ2738S
> Firmware Revision: AD001A
> Standards:
> Supported: 6 5 4
> Likely used: 6
> Configuration:
> Logical max current
> cylinders 16383 16383
> heads 16 16
> sectors/track 63 63
> --
> CHS current addressable sectors: 16514064
> LBA user addressable sectors: 156301488
> LBA48 user addressable sectors: 156301488
> device size with M = 1024*1024: 76319 MBytes
> device size with M = 1000*1000: 80026 MBytes (80 GB)
> Capabilities:
> LBA, IORDY(can be disabled)
> Standby timer values: spec'd by Standard, no device specific minimum
> R/W multiple sector transfer: Max = 16 Current = ?
> Advanced power management level: unknown setting (0x0080)
> DMA: sdma0 sdma1 sdma2 mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3
> udma4 *udma5
> Cycle time: min=120ns recommended=120ns
> PIO: pio0 pio1 pio2 pio3 pio4
> Cycle time: no flow control=120ns IORDY flow control=120ns
> Commands/features:
> Enabled Supported:
> * SMART feature set
> Security Mode feature set
> * Power Management feature set
> * Write cache
> * Look-ahead
> * Host Protected Area feature set
> * WRITE_BUFFER command
> * READ_BUFFER command
> * NOP cmd
> * DOWNLOAD_MICROCODE
> * Advanced Power Management feature set
> SET_MAX security extension
> * 48-bit Address feature set
> * Device Configuration Overlay feature set
> * Mandatory FLUSH_CACHE
> * FLUSH_CACHE_EXT
> * SMART error logging
> * SMART self-test
> * General Purpose Logging feature set
> * IDLE_IMMEDIATE with UNLOAD
> Security:
> Master password revision code = 65534
> supported
> not enabled
> not locked
> frozen
> not expired: security count
> not supported: enhanced erase
> 64min for SECURITY ERASE UNIT.
> HW reset results:
> CBLID- above Vih
> Device num = 0 determined by the jumper
> Checksum: correct
> Timing cached reads: 1270 MB in 2.00 seconds = 634.59 MB/sec
> Timing buffered disk reads: 92 MB in 3.01 seconds = 30.58 MB/sec
Dispositivo Boot Início Fim Blocos Id Sistema
/dev/sda1 * 1 10199 81923436 c W95 FAT32
(LBA)
/dev/sda2 10200 14407 33800760 83 Linux
/dev/sda3 14408 14593 1494045 5 Estendida
/dev/sda5 14408 14593 1494013+ 82 Linux swap /
Solaris
/dev/sda1:
Timing cached reads: 994 MB in 2.00 seconds = 496.81 MB/sec
Timing buffered disk reads: 116 MB in 3.04 seconds = 38.20 MB/sec
/dev/sda2:
Timing cached reads: 982 MB in 2.00 seconds = 491.04 MB/sec
Timing buffered disk reads: 86 MB in 3.04 seconds = 28.32 MB/sec
/dev/sda3:
Timing buffered disk reads:
/dev/sda5:
Timing cached reads: 960 MB in 2.00 seconds = 479.95 MB/sec
Timing buffered disk reads: 62 MB in 3.05 seconds = 20.30 MB/sec
/dev/hda:
Model=PIONEER DVD-RW DVR-K17RS, FwRev=1.00, SerialNo=
Config={ Fixed Removeable DTR<=5Mbs DTR>10Mbs nonMagnetic }
RawCHS=0/0/0, TrkSize=0, SectSize=0, ECCbytes=0
BuffType=13395, BuffSize=64kB, MaxMultSect=0
(maybe): CurCHS=0/0/0, CurSects=0, LBA=yes, LBAsects=0
IORDY=on/off, tPIO={min:240,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: mdma0 mdma1 mdma2
UDMA modes: udma0 udma1 *udma2
AdvancedPM=no
Drive conforms to: Unspecified: ATA/ATAPI-2 ATA/ATAPI-3 ATA/ATAPI-4
ATA/ATAPI-5 ATA/ATAPI-6 ATA/ATAPI-7
* signifies the current active mode
ATAPI CD-ROM, with removable media
Model Number: PIONEER DVD-RW DVR-K17RS
Serial Number: FKDL079063WL
Firmware Revision: 1.00
Standards:
Likely used CD-ROM ATAPI-1
Configuration:
DRQ response: 50us.
Packet size: 12 bytes
Capabilities:
LBA, IORDY(can be disabled)
Buffer size: 64.0kB
DMA: mdma0 mdma1 mdma2 udma0 udma1 *udma2
Cycle time: min=120ns recommended=120ns
PIO: pio0 pio1 pio2 pio3 pio4
Cycle time: no flow control=240ns IORDY flow control=120ns
Commands/features:
Enabled Supported:
* Power Management feature set
* PACKET command feature set
* DEVICE_RESET command
HW reset results:
CBLID- above Vih
Device num = 0 determined by the jumper
Timing buffered disk reads:
/dev/sda:
Model=SAMSUNG HM120JI , FwRev=YF100-10,
SerialNo=S09GJ10LB34302
Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs }
RawCHS=16383/16/63, TrkSize=34902, SectSize=554, ECCbytes=4
BuffType=DualPortCache, BuffSize=8192kB, MaxMultSect=16, MultSect=?
16?
CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=234441648
IORDY=on/off, tPIO={min:120,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: mdma0 mdma1 mdma2
UDMA modes: udma0 udma1 udma2 udma3 udma4 *udma5
AdvancedPM=yes: disabled (255) WriteCache=enabled
Drive conforms to: ATA/ATAPI-7 T13 1532D revision 0: ATA/ATAPI-1 ATA/
ATAPI-2 ATA/ATAPI-3 ATA/ATAPI-4 ATA/ATAPI-5 ATA/ATAPI-6 ATA/ATAPI-7
* signifies the current active mode
ATA device, with non-removable media
Model Number: SAMSUNG HM120JI
Serial Number: S09GJ10LB34302
Firmware Revision: YF100-10
Standards:
Used: ATA/ATAPI-7 T13 1532D revision 0
Supported: 7 6 5 4
Configuration:
Logical max current
cylinders 16383 16383
heads 16 16
sectors/track 63 63
--
CHS current addressable sectors: 16514064
LBA user addressable sectors: 234441648
LBA48 user addressable sectors: 234441648
device size with M = 1024*1024: 114473 MBytes
device size with M = 1000*1000: 120034 MBytes (120 GB)
Capabilities:
LBA, IORDY(can be disabled)
Queue depth: 32
Standby timer values: spec'd by Standard, no device specific minimum
R/W multiple sector transfer: Max = 16 Current = 16
Advanced power management level: unknown setting (0x0080)
Recommended acoustic management value: 254, current value: 254
DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 *udma5 udma6
udma7
Cycle time: min=120ns recommended=120ns
PIO: pio0 pio1 pio2 pio3 pio4
Cycle time: no flow control=120ns IORDY flow control=120ns
Commands/features:
Enabled Supported:
* SMART feature set
Security Mode feature set
* Power Management feature set
* Write cache
* Look-ahead
* Host Protected Area feature set
* WRITE_BUFFER command
* READ_BUFFER command
NOP cmd
* DOWNLOAD_MICROCODE
Advanced Power Management feature set
* SET_MAX security extension
* Automatic Acoustic Management feature set
* 48-bit Address feature set
* Device Configuration Overlay feature set
* Mandatory FLUSH_CACHE
* FLUSH_CACHE_EXT
* SMART error logging
* SMART self-test
General Purpose Logging feature set
* IDLE_IMMEDIATE with UNLOAD
* SATA-I signaling speed (1.5Gb/s)
* Native Command Queueing (NCQ)
* Host-initiated interface power management
* Phy event counters
DMA Setup Auto-Activate optimization
Device-initiated interface power management
* Software settings preservation
* SMART Command Transport (SCT) feature set
* SCT Long Sector Access (AC1)
* SCT LBA Segment Access (AC2)
* SCT Error Recovery Control (AC3)
* SCT Features Control (AC4)
* SCT Data Tables (AC5)
Security:
Master password revision code = 65534
supported
not enabled
not locked
frozen
not expired: security count
supported: enhanced erase
88min for SECURITY ERASE UNIT. 88min for ENHANCED SECURITY ERASE
UNIT.
Checksum: correct
Timing cached reads: 954 MB in 2.00 seconds = 476.81 MB/sec
Timing buffered disk reads: 116 MB in 3.04 seconds = 38.16 MB/sec