[PATCH] MX1/MX2: -EINVAL overwritten in second iteration in mxc_gpio_setup_multiple_pins()

[Roel Kluin]

Due to the `ret = gpio_request()' below in the loop, the initial -EINVAL value
of ret is overwritten.

Signed-off-by: Roel Kluin <roel....@gmail.com>
---
Not 100% sure this is needed, please review. One more question: is it ok
to return 0 when count is 0 (and nothing is done)?

diff --git a/arch/arm/plat-mxc/iomux-mx1-mx2.c b/arch/arm/plat-mxc/iomux-mx1-mx2.c
index a37163c..25023ac 100644
--- a/arch/arm/plat-mxc/iomux-mx1-mx2.c
+++ b/arch/arm/plat-mxc/iomux-mx1-mx2.c
@@ -116,14 +116,16 @@ int mxc_gpio_setup_multiple_pins(const int *pin_list, unsigned count,
int i;
unsigned gpio;
unsigned mode;
- int ret = -EINVAL;
+ int ret;

for (i = 0; i < count; i++) {
gpio = *p & (GPIO_PIN_MASK | GPIO_PORT_MASK);
mode = *p & ~(GPIO_PIN_MASK | GPIO_PORT_MASK);

- if (gpio >= (GPIO_PORT_MAX + 1) * 32)
+ if (gpio >= (GPIO_PORT_MAX + 1) * 32) {
+ ret = -EINVAL;
goto setup_error;
+ }

ret = gpio_request(gpio, label);
if (ret)
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majo...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

[Uwe Kleine-König]

On Wed, Feb 03, 2010 at 08:19:00PM +0100, Roel Kluin wrote:
> Due to the `ret = gpio_request()' below in the loop, the initial -EINVAL value
> of ret is overwritten.
>
> Signed-off-by: Roel Kluin <roel....@gmail.com>

Acked-by: Uwe Kleine-K�nig <u.klein...@pengutronix.de>

> ---
> Not 100% sure this is needed, please review. One more question: is it ok
> to return 0 when count is 0 (and nothing is done)?

I'd say yes. If you want nothing from me, I can say I gave you all you
wanted without doing anything.

Thanks
Uwe

--
Pengutronix e.K. | Uwe Kleine-K�nig |
Industrial Linux Solutions | http://www.pengutronix.de/ |