Google Groups no longer supports new Usenet posts or subscriptions. Historical content remains viewable.

Dismiss

Telecom Clock driver for MPCBL0010 ATCA compute blade.

1 view

Skip to first unread message

Mark Gross

unread,

Aug 30, 2005, 3:10:12 PM8/30/05

The following is a driver I would like to see included in the base kernel.

It allows OS controll of a device that synchronizes signaling hardware across a ATCA chassis.

The telecom clock hardware doesn't interact much with the operating system, and is controlled
via registers in the FPGA on the hardware. It is hardware that is unique to this computer.

Thanks for looking at this,

diff -urN -X dontdiff_osdl vanilla/linux-2.6.13/drivers/char/Kconfig linux-2.6.13/drivers/char/Kconfig
--- vanilla/linux-2.6.13/drivers/char/Kconfig 2005-08-28 16:41:01.000000000 -0700
+++ linux-2.6.13/drivers/char/Kconfig 2005-08-30 10:52:25.950853752 -0700
@@ -1002,5 +1002,15 @@

source "drivers/char/tpm/Kconfig"

+config TELCLOCK
+ tristate "Telecom clock driver for ATCA"
+ depends on EXPERIMENTAL
+ default n
+ help
+ The telecom clock device allows direct userspace access to the
+ configuration of the telecom clock configuration settings.
+ This device is used for hardware synchronization across the ATCA
+ backplane fabric.
+
endmenu

diff -urN -X dontdiff_osdl vanilla/linux-2.6.13/drivers/char/Makefile linux-2.6.13/drivers/char/Makefile
--- vanilla/linux-2.6.13/drivers/char/Makefile 2005-08-28 16:41:01.000000000 -0700
+++ linux-2.6.13/drivers/char/Makefile 2005-08-30 10:52:25.952853448 -0700
@@ -82,6 +82,7 @@
obj-$(CONFIG_SCx200_GPIO) += scx200_gpio.o
obj-$(CONFIG_GPIO_VR41XX) += vr41xx_giu.o
obj-$(CONFIG_TANBAC_TB0219) += tb0219.o
+obj-$(CONFIG_TELCLOCK) += tlclk.o

obj-$(CONFIG_WATCHDOG) += watchdog/
obj-$(CONFIG_MWAVE) += mwave/
diff -urN -X dontdiff_osdl vanilla/linux-2.6.13/drivers/char/tlclk.c linux-2.6.13/drivers/char/tlclk.c
--- vanilla/linux-2.6.13/drivers/char/tlclk.c 1969-12-31 16:00:00.000000000 -0800
+++ linux-2.6.13/drivers/char/tlclk.c 2005-08-30 11:12:15.677987736 -0700
@@ -0,0 +1,946 @@
+/*
+ * Telecom Clock driver for Intel NetStructure(tm) MPCBL0010
+ *
+ * Copyright (C) 2005 Kontron Canada
+ *
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for more
+ * details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * Send feedback to <sebastien...@ca.kontron.com>
+ *
+ * 2.6 driver version being maintained by <mark....@intel.com>
+ *
+ * Description : This is the TELECOM CLOCK module driver for the ATCA platform.
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/kernel.h> /* printk() */
+#include <linux/fs.h> /* everything... */
+#include <linux/errno.h> /* error codes */
+#include <linux/delay.h> /* udelay */
+#include <linux/slab.h>
+#include <linux/ioport.h>
+#include <linux/interrupt.h>
+#include <linux/spinlock.h>
+#include <linux/timer.h>
+#include <linux/sysfs.h>
+#include <linux/device.h>
+#include <linux/miscdevice.h>
+#include <asm/io.h> /* inb/outb */
+#include <asm/uaccess.h>
+
+#include "tlclk.h" /* TELECOM IOCTL DEFINE */
+
+MODULE_AUTHOR("Sebastien Bouchard <sebastien...@ca.kontron.com>");
+MODULE_LICENSE("GPL");
+
+/* Telecom clock I/O register definition */
+#define TLCLK_BASE 0xa08
+#define TLCLK_REG0 TLCLK_BASE
+#define TLCLK_REG1 (TLCLK_BASE+1)
+#define TLCLK_REG2 (TLCLK_BASE+2)
+#define TLCLK_REG3 (TLCLK_BASE+3)
+#define TLCLK_REG4 (TLCLK_BASE+4)
+#define TLCLK_REG5 (TLCLK_BASE+5)
+#define TLCLK_REG6 (TLCLK_BASE+6)
+#define TLCLK_REG7 (TLCLK_BASE+7)
+
+#define SET_PORT_BITS(port, mask, val) outb(((inb(port) & mask) | val), port)
+
+/* 0 = Dynamic allocation of the major device number */
+#define TLCLK_MAJOR 252
+
+/*
+uncomment to include classic IOCTL's
+#define TLCLK_IOCTL
+*/
+
+/* sysFS interface definition:
+Uppon loading the driver will create a sysfs directory under class/misc/tlclk.
+
+This directory exports the following interfaces. There opperation is documented
+in the MCPBL0010 TPS under the Telecom Clock API section, 11.4.
+alarms :
+current_ref :
+enable_clk3a_output :
+enable_clk3b_output :
+enable_clka0_output :
+enable_clka1_output :
+enable_clkb0_output :
+enable_clkb1_output :
+filter_select :
+hardware_switching :
+hardware_switching_mode :
+interrupt_switch :
+mode_select :
+refalign :
+reset :
+select_amcb1_transmit_clock :
+select_amcb2_transmit_clock :
+select_redundant_clock :
+select_ref_frequency :
+test_mode :
+
+All sysfs interaces are integers in hex format, i.e echo 99 > refalign
+has the same effect as echo 0x99 > refalign.
+
+*/
+
+#if CONFIG_DEBUG_KERNEL
+#define debug_printk( args... ) printk( args)
+#else
+#define debug_printk( args... )
+#endif
+
+
+static unsigned int telclk_interrupt;
+
+static int int_events; /* Event that generate a interrupt */
+static int got_event; /* if events processing have been done */
+
+static void switchover_timeout(unsigned long data);
+static struct timer_list switchover_timer = TIMER_INITIALIZER(switchover_timeout , 0, 0);
+
+static struct tlclk_alarms *alarm_events;
+
+DEFINE_SPINLOCK(event_lock);
+
+static int tlclk_major = TLCLK_MAJOR;
+
+irqreturn_t tlclk_interrupt(int irq, void *dev_id, struct pt_regs *regs);
+
+DECLARE_WAIT_QUEUE_HEAD(wq);
+
+#ifdef TLCLK_IOCTL
+static int
+tlclk_ioctl(struct inode *inode,
+ struct file *filp, unsigned int cmd, unsigned long arg)
+{
+ unsigned long flags;
+ unsigned char val;
+ int ret_val = 0;
+
+ val = (unsigned char)arg;
+ if (_IOC_TYPE(cmd) != TLCLK_IOC_MAGIC)
+ return -ENOTTY;
+
+ if (_IOC_NR(cmd) > TLCLK_IOC_MAXNR)
+ return -ENOTTY;
+
+ spin_lock_irqsave(&event_lock, flags);
+ switch (cmd) {
+ case IOCTL_RESET:
+ SET_PORT_BITS(TLCLK_REG4, 0xfd, val);
+ break;
+ case IOCTL_MODE_SELECT:
+ SET_PORT_BITS(TLCLK_REG0, 0xcf, val);
+ break;
+ case IOCTL_REFALIGN:
+ /* GENERATING 0 to 1 transistion */
+ SET_PORT_BITS(TLCLK_REG0, 0xf7, 0);
+ udelay(2);
+ SET_PORT_BITS(TLCLK_REG0, 0xf7, 0x08);
+ udelay(2);
+ SET_PORT_BITS(TLCLK_REG0, 0xf7, 0);
+ break;
+ case IOCTL_HARDWARE_SWITCHING:
+ SET_PORT_BITS(TLCLK_REG0, 0x7f, val);
+ break;
+ case IOCTL_HARDWARE_SWITCHING_MODE:
+ SET_PORT_BITS(TLCLK_REG0, 0xbf, val);
+ break;
+ case IOCTL_FILTER_SELECT:
+ SET_PORT_BITS(TLCLK_REG0, 0xfb, val);
+ break;
+ case IOCTL_SELECT_REF_FREQUENCY:
+ SET_PORT_BITS(TLCLK_REG1, 0xfd, val);
+ break;
+ case IOCTL_SELECT_REDUNDANT_CLOCK:
+ SET_PORT_BITS(TLCLK_REG1, 0xfe, val);
+ break;
+ case IOCTL_SELECT_AMCB1_TRANSMIT_CLOCK:
+ if ((val == CLK_8kHz) || (val == CLK_16_384MHz)) {
+ SET_PORT_BITS(TLCLK_REG3, 0xf8, 0x5);
+ SET_PORT_BITS(TLCLK_REG1, 0xfb, ~val);
+ } else if (val >= CLK_8_592MHz) {
+ SET_PORT_BITS(TLCLK_REG3, 0xf8, 0x7);
+ switch (val) {
+ case CLK_8_592MHz:
+ SET_PORT_BITS(TLCLK_REG0, 0xfc, 1);
+ break;
+ case CLK_11_184MHz:
+ SET_PORT_BITS(TLCLK_REG0, 0xfc, 0);
+ break;
+ case CLK_34_368MHz:
+ SET_PORT_BITS(TLCLK_REG0, 0xfc, 3);
+ break;
+ case CLK_44_736MHz:
+ SET_PORT_BITS(TLCLK_REG0, 0xfc, 2);
+ break;
+ }
+ } else
+ SET_PORT_BITS(TLCLK_REG3, 0xf8, val);
+ break;
+ case IOCTL_SELECT_AMCB2_TRANSMIT_CLOCK:
+ if ((val == CLK_8kHz) || (val == CLK_16_384MHz)) {
+ SET_PORT_BITS(TLCLK_REG3, 0xc7, 0x28);
+ SET_PORT_BITS(TLCLK_REG1, 0xfb, ~val);
+ } else if (val >= CLK_8_592MHz) {
+ SET_PORT_BITS(TLCLK_REG3, 0xc7, 0x38);
+ switch (val) {
+ case CLK_8_592MHz:
+ SET_PORT_BITS(TLCLK_REG0, 0xfc, 1);
+ break;
+ case CLK_11_184MHz:
+ SET_PORT_BITS(TLCLK_REG0, 0xfc, 0);
+ break;
+ case CLK_34_368MHz:
+ SET_PORT_BITS(TLCLK_REG0, 0xfc, 3);
+ break;
+ case CLK_44_736MHz:
+ SET_PORT_BITS(TLCLK_REG0, 0xfc, 2);
+ break;
+ }
+ } else
+ SET_PORT_BITS(TLCLK_REG3, 0xc7, val << 3);
+ break;
+ case IOCTL_TEST_MODE:
+ SET_PORT_BITS(TLCLK_REG4, 0xfd, 2);
+ break;
+ case IOCTL_ENABLE_CLKA0_OUTPUT:
+ SET_PORT_BITS(TLCLK_REG2, 0xfe, val);
+ break;
+ case IOCTL_ENABLE_CLKB0_OUTPUT:
+ SET_PORT_BITS(TLCLK_REG2, 0xfd, val << 1);
+ break;
+ case IOCTL_ENABLE_CLKA1_OUTPUT:
+ SET_PORT_BITS(TLCLK_REG2, 0xfb, val << 2);
+ break;
+ case IOCTL_ENABLE_CLKB1_OUTPUT:
+ SET_PORT_BITS(TLCLK_REG2, 0xf7, val << 3);
+ break;
+ case IOCTL_ENABLE_CLK3A_OUTPUT:
+ SET_PORT_BITS(TLCLK_REG3, 0xbf, val << 6);
+ break;
+ case IOCTL_ENABLE_CLK3B_OUTPUT:
+ SET_PORT_BITS(TLCLK_REG3, 0x7f, val << 7);
+ break;
+ case IOCTL_READ_ALARMS:
+ ret_val = (inb(TLCLK_REG2) & 0xf0);
+ break;
+ case IOCTL_READ_INTERRUPT_SWITCH:
+ ret_val = inb(TLCLK_REG6);
+ break;
+ case IOCTL_READ_CURRENT_REF:
+ ret_val = ((inb(TLCLK_REG1) & 0x08) >> 3);
+ break;
+ }
+ spin_unlock_irqrestore(&event_lock, flags);
+
+ return ret_val;
+}
+#endif
+
+
+static int tlclk_open(struct inode *inode, struct file *filp)
+{
+ int result;
+
+ /* Make sure there is no interrupt pending while
+ * initialising interrupt handler */
+ inb(TLCLK_REG6);
+
+ /* This device is wired through the FPGA IO space of the ATCA blade
+ * we can't share this IRQ */
+ result = request_irq(telclk_interrupt, &tlclk_interrupt,
+ SA_INTERRUPT, "telclock", tlclk_interrupt);
+ if (result == -EBUSY) {
+ printk(KERN_ERR "telclock: Interrupt can't be reserved!\n");
+ return -EBUSY;
+ }
+ inb(TLCLK_REG6); /* Clear interrupt events */
+
+ return 0;
+}
+
+static int tlclk_release(struct inode *inode, struct file *filp)
+{
+ free_irq(telclk_interrupt, tlclk_interrupt);
+
+ return 0;
+}
+
+ssize_t
+tlclk_read(struct file * filp, char __user * buf, size_t count, loff_t * f_pos)
+{
+ int count0 = sizeof(struct tlclk_alarms);
+
+ wait_event_interruptible(wq, got_event);
+ if (copy_to_user(buf, alarm_events, sizeof(struct tlclk_alarms)))
+ return -EFAULT;
+
+ memset(alarm_events, 0, sizeof(struct tlclk_alarms));
+ got_event = 0;
+
+ return count0;
+}
+
+ssize_t
+tlclk_write(struct file * filp, const char __user * buf, size_t count,
+ loff_t * f_pos)
+{
+ return 0;
+}
+
+static struct file_operations tlclk_fops = {
+ .read = tlclk_read,
+ .write = tlclk_write,
+#ifdef TLCLK_IOCTL
+ .ioctl = tlclk_ioctl,
+#endif
+ .open = tlclk_open,
+ .release = tlclk_release,
+
+};
+
+#ifdef CONFIG_SYSFS
+static struct miscdevice tlclk_miscdev = {
+ .minor = MISC_DYNAMIC_MINOR,
+ .name = "tlclk",
+ .fops = &tlclk_fops,
+};
+
+static ssize_t show_current_ref(struct class_device *d, char * buf)
+{
+ unsigned long ret_val;
+ unsigned long flags;
+
+ spin_lock_irqsave(&event_lock, flags);
+ ret_val = ((inb(TLCLK_REG1) & 0x08) >> 3);
+ spin_unlock_irqrestore(&event_lock, flags);
+
+ return sprintf(buf, "0x%lX\n", ret_val);
+}
+
+static CLASS_DEVICE_ATTR(current_ref, S_IRUGO, show_current_ref, NULL);
+
+
+static ssize_t show_interrupt_switch(struct class_device *d, char * buf)
+{
+ unsigned long ret_val;
+ unsigned long flags;
+
+ spin_lock_irqsave(&event_lock, flags);
+ ret_val = inb(TLCLK_REG6);
+ spin_unlock_irqrestore(&event_lock, flags);
+
+ return sprintf(buf, "0x%lX\n", ret_val);
+}
+
+static CLASS_DEVICE_ATTR(interrupt_switch, S_IRUGO,
+ show_interrupt_switch, NULL);
+
+
+static ssize_t show_alarms(struct class_device *d, char * buf)
+{
+ unsigned long ret_val;
+ unsigned long flags;
+
+ spin_lock_irqsave(&event_lock, flags);
+ ret_val = (inb(TLCLK_REG2) & 0xf0);
+ spin_unlock_irqrestore(&event_lock, flags);
+
+ return sprintf(buf, "0x%lX\n", ret_val);
+}
+
+static CLASS_DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL);
+
+
+static ssize_t store_enable_clk3b_output(struct class_device *d,
+ const char * buf, size_t count)
+{
+ unsigned long tmp;
+ unsigned char val;
+ unsigned long flags;
+
+ sscanf(buf, "%lX", &tmp);
+ debug_printk(KERN_ERR "tmp = 0x%lX \n", tmp);
+
+ val = (unsigned char)tmp;
+ spin_lock_irqsave(&event_lock, flags);
+ SET_PORT_BITS(TLCLK_REG3, 0x7f, val << 7);
+ spin_unlock_irqrestore(&event_lock, flags);
+
+ return strnlen(buf, count);
+}
+
+static CLASS_DEVICE_ATTR(enable_clk3b_output, S_IWUGO, NULL,
+ store_enable_clk3b_output);
+
+
+
+static ssize_t store_enable_clk3a_output(struct class_device *d,
+ const char * buf, size_t count)
+{
+ unsigned long flags;
+ unsigned long tmp;
+ unsigned char val;
+
+ sscanf(buf, "%lX", &tmp);
+ debug_printk(KERN_ERR "tmp = 0x%lX \n", tmp);
+
+ val = (unsigned char)tmp;
+ spin_lock_irqsave(&event_lock, flags);
+ SET_PORT_BITS(TLCLK_REG3, 0xbf, val << 6);
+ spin_unlock_irqrestore(&event_lock, flags);
+
+ return strnlen(buf, count);
+}
+
+static CLASS_DEVICE_ATTR(enable_clk3a_output, S_IWUGO, NULL,
+ store_enable_clk3a_output);
+
+
+
+static ssize_t store_enable_clkb1_output(struct class_device *d,
+ const char * buf, size_t count)
+{
+ unsigned long flags;
+ unsigned long tmp;
+ unsigned char val;
+
+ sscanf(buf, "%lX", &tmp);
+ debug_printk(KERN_ERR "tmp = 0x%lX \n", tmp);
+
+ val = (unsigned char)tmp;
+ spin_lock_irqsave(&event_lock, flags);
+ SET_PORT_BITS(TLCLK_REG2, 0xf7, val << 3);
+ spin_unlock_irqrestore(&event_lock, flags);
+
+ return strnlen(buf, count);
+}
+
+static CLASS_DEVICE_ATTR(enable_clkb1_output, S_IWUGO, NULL,
+ store_enable_clkb1_output);
+
+
+static ssize_t store_enable_clka1_output(struct class_device *d,
+ const char * buf, size_t count)
+{
+ unsigned long flags;
+ unsigned long tmp;
+ unsigned char val;
+
+ sscanf(buf, "%lX", &tmp);
+ debug_printk(KERN_ERR "tmp = 0x%lX \n", tmp);
+
+ val = (unsigned char)tmp;
+ spin_lock_irqsave(&event_lock, flags);
+ SET_PORT_BITS(TLCLK_REG2, 0xfb, val << 2);
+ spin_unlock_irqrestore(&event_lock, flags);
+
+ return strnlen(buf, count);
+}
+
+static CLASS_DEVICE_ATTR(enable_clka1_output, S_IWUGO, NULL,
+ store_enable_clka1_output);
+
+
+static ssize_t store_enable_clkb0_output(struct class_device *d,
+ const char * buf, size_t count)
+{
+ unsigned long flags;
+ unsigned long tmp;
+ unsigned char val;
+
+ sscanf(buf, "%lX", &tmp);
+ debug_printk(KERN_ERR "tmp = 0x%lX \n", tmp);
+
+ val = (unsigned char)tmp;
+ spin_lock_irqsave(&event_lock, flags);
+ SET_PORT_BITS(TLCLK_REG2, 0xfd, val << 1);
+ spin_unlock_irqrestore(&event_lock, flags);
+
+ return strnlen(buf, count);
+}
+
+static CLASS_DEVICE_ATTR(enable_clkb0_output, S_IWUGO, NULL,
+ store_enable_clkb0_output);
+
+
+static ssize_t store_enable_clka0_output(struct class_device *d,
+ const char * buf, size_t count)
+{
+ unsigned long flags;
+ unsigned long tmp;
+ unsigned char val;
+
+ sscanf(buf, "%lX", &tmp);
+ debug_printk(KERN_ERR "tmp = 0x%lX \n", tmp);
+
+ val = (unsigned char)tmp;
+ spin_lock_irqsave(&event_lock, flags);
+ SET_PORT_BITS(TLCLK_REG2, 0xfe, val);
+ spin_unlock_irqrestore(&event_lock, flags);
+
+ return strnlen(buf, count);
+}
+
+static CLASS_DEVICE_ATTR(enable_clka0_output, S_IWUGO, NULL,
+ store_enable_clka0_output);
+
+
+static ssize_t store_test_mode(struct class_device *d, const char * buf,
+ size_t count)
+{
+ unsigned long flags;
+ unsigned long tmp;
+ unsigned char val;
+
+ sscanf(buf, "%lX", &tmp);
+ debug_printk(KERN_ERR "tmp = 0x%lX \n", tmp);
+
+ val = (unsigned char)tmp;
+ spin_lock_irqsave(&event_lock, flags);
+ SET_PORT_BITS(TLCLK_REG4, 0xfd, 2);
+ spin_unlock_irqrestore(&event_lock, flags);
+
+ return strnlen(buf, count);
+}
+
+static CLASS_DEVICE_ATTR(test_mode, S_IWUGO, NULL, store_test_mode);
+
+static ssize_t store_select_amcb2_transmit_clock(struct class_device *d,
+ const char * buf, size_t count)
+{
+ unsigned long flags;
+ unsigned long tmp;
+ unsigned char val;
+
+ sscanf(buf, "%lX", &tmp);
+ debug_printk(KERN_ERR "tmp = 0x%lX \n", tmp);
+
+ val = (unsigned char)tmp;
+ spin_lock_irqsave(&event_lock, flags);
+ if ((val == CLK_8kHz) || (val == CLK_16_384MHz)) {
+ SET_PORT_BITS(TLCLK_REG3, 0xc7, 0x28);
+ SET_PORT_BITS(TLCLK_REG1, 0xfb, ~val);
+ } else if (val >= CLK_8_592MHz) {
+ SET_PORT_BITS(TLCLK_REG3, 0xc7, 0x38);
+ switch (val) {
+ case CLK_8_592MHz:
+ SET_PORT_BITS(TLCLK_REG0, 0xfc, 1);
+ break;
+ case CLK_11_184MHz:
+ SET_PORT_BITS(TLCLK_REG0, 0xfc, 0);
+ break;
+ case CLK_34_368MHz:
+ SET_PORT_BITS(TLCLK_REG0, 0xfc, 3);
+ break;
+ case CLK_44_736MHz:
+ SET_PORT_BITS(TLCLK_REG0, 0xfc, 2);
+ break;
+ }
+ } else
+ SET_PORT_BITS(TLCLK_REG3, 0xc7, val << 3);
+
+
+ spin_unlock_irqrestore(&event_lock, flags);
+
+ return strnlen(buf, count);
+}
+
+static CLASS_DEVICE_ATTR(select_amcb2_transmit_clock, S_IWUGO, NULL,
+ store_select_amcb2_transmit_clock);
+
+static ssize_t store_select_amcb1_transmit_clock(struct class_device *d,
+ const char * buf, size_t count)
+{
+ unsigned long tmp;
+ unsigned char val;
+ unsigned long flags;
+
+ sscanf(buf, "%lX", &tmp);
+ debug_printk(KERN_ERR "tmp = 0x%lX \n", tmp);
+
+ val = (unsigned char)tmp;
+ spin_lock_irqsave(&event_lock, flags);
+ if ((val == CLK_8kHz) || (val == CLK_16_384MHz)) {
+ SET_PORT_BITS(TLCLK_REG3, 0xf8, 0x5);
+ SET_PORT_BITS(TLCLK_REG1, 0xfb, ~val);
+ } else if (val >= CLK_8_592MHz) {
+ SET_PORT_BITS(TLCLK_REG3, 0xf8, 0x7);
+ switch (val) {
+ case CLK_8_592MHz:
+ SET_PORT_BITS(TLCLK_REG0, 0xfc, 1);
+ break;
+ case CLK_11_184MHz:
+ SET_PORT_BITS(TLCLK_REG0, 0xfc, 0);
+ break;
+ case CLK_34_368MHz:
+ SET_PORT_BITS(TLCLK_REG0, 0xfc, 3);
+ break;
+ case CLK_44_736MHz:
+ SET_PORT_BITS(TLCLK_REG0, 0xfc, 2);
+ break;
+ }
+ } else
+ SET_PORT_BITS(TLCLK_REG3, 0xf8, val);
+ spin_unlock_irqrestore(&event_lock, flags);
+
+ return strnlen(buf, count);
+}
+
+static CLASS_DEVICE_ATTR(select_amcb1_transmit_clock, S_IWUGO, NULL,
+ store_select_amcb1_transmit_clock);
+
+static ssize_t store_select_redundant_clock(struct class_device *d,
+ const char * buf, size_t count)
+{
+ unsigned long tmp;
+ unsigned char val;
+ unsigned long flags;
+
+ sscanf(buf, "%lX", &tmp);
+ debug_printk(KERN_ERR "tmp = 0x%lX \n", tmp);
+
+ val = (unsigned char)tmp;
+ spin_lock_irqsave(&event_lock, flags);
+ SET_PORT_BITS(TLCLK_REG1, 0xfe, val);
+ spin_unlock_irqrestore(&event_lock, flags);
+
+ return strnlen(buf, count);
+}
+
+static CLASS_DEVICE_ATTR(select_redundant_clock, S_IWUGO, NULL,
+ store_select_redundant_clock);
+
+static ssize_t store_select_ref_frequency(struct class_device *d,
+ const char * buf, size_t count)
+{
+ unsigned long tmp;
+ unsigned char val;
+ unsigned long flags;
+
+ sscanf(buf, "%lX", &tmp);
+ debug_printk(KERN_ERR "tmp = 0x%lX \n", tmp);
+
+ val = (unsigned char)tmp;
+ spin_lock_irqsave(&event_lock, flags);
+ SET_PORT_BITS(TLCLK_REG1, 0xfd, val);
+ spin_unlock_irqrestore(&event_lock, flags);
+
+ return strnlen(buf, count);
+}
+
+static CLASS_DEVICE_ATTR(select_ref_frequency, S_IWUGO, NULL,
+ store_select_ref_frequency);
+
+static ssize_t store_filter_select(struct class_device *d,
+ const char * buf, size_t count)
+{
+ unsigned long tmp;
+ unsigned char val;
+ unsigned long flags;
+
+ sscanf(buf, "%lX", &tmp);
+ debug_printk(KERN_ERR "tmp = 0x%lX \n", tmp);
+
+ val = (unsigned char)tmp;
+ spin_lock_irqsave(&event_lock, flags);
+ SET_PORT_BITS(TLCLK_REG0, 0xfb, val);
+ spin_unlock_irqrestore(&event_lock, flags);
+
+ return strnlen(buf, count);
+}
+
+static CLASS_DEVICE_ATTR(filter_select, S_IWUGO, NULL, store_filter_select);
+
+static ssize_t store_hardware_switching_mode(struct class_device *d,
+ const char * buf, size_t count)
+{
+ unsigned long tmp;
+ unsigned char val;
+ unsigned long flags;
+
+ sscanf(buf, "%lX", &tmp);
+ debug_printk(KERN_ERR "tmp = 0x%lX \n", tmp);
+
+ val = (unsigned char)tmp;
+ spin_lock_irqsave(&event_lock, flags);
+ SET_PORT_BITS(TLCLK_REG0, 0xbf, val);
+ spin_unlock_irqrestore(&event_lock, flags);
+
+ return strnlen(buf, count);
+}
+
+static CLASS_DEVICE_ATTR(hardware_switching_mode, S_IWUGO, NULL,
+ store_hardware_switching_mode);
+
+
+static ssize_t store_hardware_switching(struct class_device *d,
+ const char * buf, size_t count)
+{
+ unsigned long tmp;
+ unsigned char val;
+ unsigned long flags;
+
+ sscanf(buf, "%lX", &tmp);
+ debug_printk(KERN_ERR "tmp = 0x%lX \n", tmp);
+
+ val = (unsigned char)tmp;
+ spin_lock_irqsave(&event_lock, flags);
+ SET_PORT_BITS(TLCLK_REG0, 0x7f, val);
+ spin_unlock_irqrestore(&event_lock, flags);
+
+ return strnlen(buf, count);
+}
+
+static CLASS_DEVICE_ATTR(hardware_switching, S_IWUGO, NULL,
+ store_hardware_switching);
+
+static ssize_t store_refalign (struct class_device *d,
+ const char * buf, size_t count)
+{
+ unsigned long tmp;
+ unsigned long flags;
+
+ sscanf(buf, "%lX", &tmp);
+ debug_printk(KERN_ERR "tmp = 0x%lX \n", tmp);
+ spin_lock_irqsave(&event_lock, flags);
+ SET_PORT_BITS(TLCLK_REG0, 0xf7, 0);
+ udelay(2);
+ SET_PORT_BITS(TLCLK_REG0, 0xf7, 0x08);
+ udelay(2);
+ SET_PORT_BITS(TLCLK_REG0, 0xf7, 0);
+ spin_unlock_irqrestore(&event_lock, flags);
+
+ return strnlen(buf, count);
+}
+
+static CLASS_DEVICE_ATTR(refalign, S_IWUGO, NULL, store_refalign);
+
+static ssize_t store_mode_select (struct class_device *d,
+ const char * buf, size_t count)
+{
+ unsigned long tmp;
+ unsigned char val;
+ unsigned long flags;
+
+ sscanf(buf, "%lX", &tmp);
+ debug_printk(KERN_ERR "tmp = 0x%lX \n", tmp);
+
+ val = (unsigned char)tmp;
+ spin_lock_irqsave(&event_lock, flags);
+ SET_PORT_BITS(TLCLK_REG0, 0xcf, val);
+ spin_unlock_irqrestore(&event_lock, flags);
+
+ return strnlen(buf, count);
+}
+
+static CLASS_DEVICE_ATTR(mode_select, S_IWUGO, NULL, store_mode_select);
+
+static ssize_t store_reset (struct class_device *d,
+ const char * buf, size_t count)
+{
+ unsigned long tmp;
+ unsigned char val;
+ unsigned long flags;
+
+ sscanf(buf, "%lX", &tmp);
+ debug_printk(KERN_ERR "tmp = 0x%lX \n", tmp);
+
+ val = (unsigned char)tmp;
+ spin_lock_irqsave(&event_lock, flags);
+ SET_PORT_BITS(TLCLK_REG4, 0xfd, val);
+ spin_unlock_irqrestore(&event_lock, flags);
+
+ return strnlen(buf, count);
+}
+
+static CLASS_DEVICE_ATTR(reset, S_IWUGO, NULL, store_reset);
+#endif /* CONFIG_SYSFS */
+
+static int __init tlclk_init(void)
+{
+ int ret;
+#ifdef CONFIG_SYSFS
+ struct class_device *class;
+#endif
+ ret = register_chrdev(tlclk_major, "telclock", &tlclk_fops);
+
+ if (ret < 0) {
+ printk(KERN_ERR "telclock: can't get major! %d\n", tlclk_major);
+ return ret;
+ }
+
+ alarm_events = kcalloc(1, sizeof(struct tlclk_alarms), GFP_KERNEL);
+
+ if (!alarm_events)
+ goto out1;
+
+ if (!request_region(TLCLK_BASE, 8, "telclock")) {
+ printk(KERN_ERR "tlclk: request_region failed! 0x%X\n",
+ TLCLK_BASE);
+ ret = -EBUSY;
+ goto out2;
+ }
+
+/* Read telecom clock IRQ number (Set by BIOS)
+ * This is also the probe opperation to avoid driver use on
+ * non MCPBL0010 hardware. */
+ telclk_interrupt = (inb(TLCLK_REG7) & 0x0f);
+
+ if (0x0F == telclk_interrupt ) { /* not MCPBL0010 ? */
+ printk(KERN_ERR "telclk_interrup = 0x%x non-mcpbl0010 hw \n", telclk_interrupt);
+ ret = -ENXIO;
+ goto out3;
+ }
+
+ init_timer(&switchover_timer);
+/* switchover_timer.function = switchover_timeout; */
+/* switchover_timer.data = 0; */
+
+#ifdef CONFIG_SYSFS
+ if( 0 > (ret = misc_register(&tlclk_miscdev )) ) {
+ printk(KERN_ERR" misc_register retruns %d \n", ret);
+ ret = -EBUSY;
+ goto out3;
+ }
+ class = tlclk_miscdev.class;
+ class_device_create_file(class, &class_device_attr_current_ref);
+ class_device_create_file(class, &class_device_attr_interrupt_switch);
+ class_device_create_file(class, &class_device_attr_alarms);
+ class_device_create_file(class, &class_device_attr_enable_clk3b_output);
+ class_device_create_file(class, &class_device_attr_enable_clk3a_output);
+ class_device_create_file(class, &class_device_attr_enable_clkb1_output);
+ class_device_create_file(class, &class_device_attr_enable_clka1_output);
+ class_device_create_file(class, &class_device_attr_enable_clkb0_output);
+ class_device_create_file(class, &class_device_attr_enable_clka0_output);
+ class_device_create_file(class, &class_device_attr_test_mode);
+ class_device_create_file(class, &class_device_attr_select_amcb2_transmit_clock);
+ class_device_create_file(class, &class_device_attr_select_amcb1_transmit_clock);
+ class_device_create_file(class, &class_device_attr_select_redundant_clock);
+ class_device_create_file(class, &class_device_attr_select_ref_frequency);
+ class_device_create_file(class, &class_device_attr_filter_select);
+ class_device_create_file(class, &class_device_attr_hardware_switching_mode);
+ class_device_create_file(class, &class_device_attr_hardware_switching);
+ class_device_create_file(class, &class_device_attr_refalign);
+ class_device_create_file(class, &class_device_attr_mode_select);
+ class_device_create_file(class, &class_device_attr_reset);
+
+#endif /* CONFIG_SYSFS */
+ return 0;
+out3:
+ release_region(TLCLK_BASE, 8);
+out2:
+ kfree(alarm_events);
+out1:
+ return ret;
+}
+
+static void __exit tlclk_cleanup(void)
+{
+#ifdef CONFIG_SYSFS
+ misc_deregister(&tlclk_miscdev);
+#endif
+ unregister_chrdev(tlclk_major, "telclock");
+
+ release_region(TLCLK_BASE, 8);
+ del_timer_sync(&switchover_timer);
+ kfree(alarm_events);
+
+}
+static void switchover_timeout(unsigned long data)
+{
+ if ((data & 1)) {
+ if ((inb(TLCLK_REG1) & 0x08) != (data & 0x08))
+ alarm_events->switchover_primary++;
+ } else {
+ if ((inb(TLCLK_REG1) & 0x08) != (data & 0x08))
+ alarm_events->switchover_secondary++;
+ }
+
+ /* Alarm processing is done, wake up read task */
+ del_timer(&switchover_timer);
+ got_event = 1;
+ wake_up(&wq);
+}
+
+irqreturn_t tlclk_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&event_lock, flags);
+ /* Read and clear interrupt events */
+ int_events = inb(TLCLK_REG6);
+
+ /* Primary_Los changed from 0 to 1 ? */
+ if (int_events & PRI_LOS_01_MASK) {
+ if (inb(TLCLK_REG2) & SEC_LOST_MASK)
+ alarm_events->lost_clocks++;
+ else
+ alarm_events->lost_primary_clock++;
+ }
+
+ /* Primary_Los changed from 1 to 0 ? */
+ if (int_events & PRI_LOS_10_MASK) {
+ alarm_events->primary_clock_back++;
+ SET_PORT_BITS(TLCLK_REG1, 0xFE, 1);
+ }
+ /* Secondary_Los changed from 0 to 1 ? */
+ if (int_events & SEC_LOS_01_MASK) {
+ if (inb(TLCLK_REG2) & PRI_LOST_MASK)
+ alarm_events->lost_clocks++;
+ else
+ alarm_events->lost_secondary_clock++;
+ }
+ /* Secondary_Los changed from 1 to 0 ? */
+ if (int_events & SEC_LOS_10_MASK) {
+ alarm_events->secondary_clock_back++;
+ SET_PORT_BITS(TLCLK_REG1, 0xFE, 0);
+ }
+ if (int_events & HOLDOVER_10_MASK)
+ alarm_events->pll_end_holdover++;
+
+ if (int_events & UNLOCK_01_MASK)
+ alarm_events->pll_lost_sync++;
+
+ if (int_events & UNLOCK_10_MASK)
+ alarm_events->pll_sync++;
+
+ /* Holdover changed from 0 to 1 ? */
+ if (int_events & HOLDOVER_01_MASK) {
+ alarm_events->pll_holdover++;
+
+ switchover_timer.expires = jiffies + msecs_to_jiffies(10); /* TIMEOUT in ~10ms */
+ switchover_timer.data = inb(TLCLK_REG1);
+ add_timer(&switchover_timer);
+ } else {
+ got_event = 1;
+ wake_up(&wq);
+ }
+ spin_unlock_irqrestore(&event_lock, flags);
+
+ return IRQ_HANDLED;
+}
+
+module_init(tlclk_init);
+module_exit(tlclk_cleanup);
diff -urN -X dontdiff_osdl vanilla/linux-2.6.13/drivers/char/tlclk.h linux-2.6.13/drivers/char/tlclk.h
--- vanilla/linux-2.6.13/drivers/char/tlclk.h 1969-12-31 16:00:00.000000000 -0800
+++ linux-2.6.13/drivers/char/tlclk.h 2005-08-30 10:52:25.961852080 -0700
@@ -0,0 +1,166 @@
+/*
+ * Telecom Clock driver for Wainwright board
+ *
+ * Copyright (C) 2005 Kontron Canada
+ *
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for more
+ * details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * Send feedback to <sebastien...@ca.kontron.com>
+ *
+ */
+
+/* Ioctl definitions */
+
+/* Use 0xA1 as magic number */
+#define TLCLK_IOC_MAGIC 0xA1
+
+/*Hardware Reset of the PLL */
+
+#define RESET_ON 0x00
+#define RESET_OFF 0x01
+#define IOCTL_RESET _IO(TLCLK_IOC_MAGIC, 1)
+
+#define IOCTL_REFALIGN _IO(TLCLK_IOC_MAGIC, 2)
+
+/* MODE SELECT */
+
+#define NORMAL_MODE 0x00
+#define HOLDOVER_MODE 0x10
+#define FREERUN_MODE 0x20
+
+#define IOCTL_MODE_SELECT _IOR(TLCLK_IOC_MAGIC, 3, char)
+
+/* FILTER SELECT */
+
+#define FILTER_6HZ 0x04
+#define FILTER_12HZ 0x00
+
+#define IOCTL_FILTER_SELECT _IOR(TLCLK_IOC_MAGIC, 4, char)
+
+/* SELECT REFERENCE FREQUENCY */
+
+#define REF_CLK1_8kHz 0x00
+#define REF_CLK2_19_44MHz 0x02
+
+#define IOCTL_SELECT_REF_FREQUENCY _IOR(TLCLK_IOC_MAGIC, 6, char)
+
+/* Select primary or secondary redundant clock */
+
+#define PRIMARY_CLOCK 0x00
+#define SECONDARY_CLOCK 0x01
+#define IOCTL_SELECT_REDUNDANT_CLOCK _IOR(TLCLK_IOC_MAGIC, 7, char)
+
+/* CLOCK TRANSMISSION DEFINE */
+
+#define CLK_8kHz 0xff
+#define CLK_16_384MHz 0xfb
+
+#define CLK_1_544MHz 0x00
+#define CLK_2_048MHz 0x01
+#define CLK_4_096MHz 0x02
+#define CLK_6_312MHz 0x03
+#define CLK_8_192MHz 0x04
+#define CLK_19_440MHz 0x06
+
+#define CLK_8_592MHz 0x08
+#define CLK_11_184MHz 0x09
+#define CLK_34_368MHz 0x0b
+#define CLK_44_736MHz 0x0a
+
+#define IOCTL_SELECT_AMCB1_TRANSMIT_CLOCK _IOR(TLCLK_IOC_MAGIC, 9, char)
+#define IOCTL_SELECT_AMCB2_TRANSMIT_CLOCK _IOR(TLCLK_IOC_MAGIC, 10, char)
+
+/* RECEIVED REFERENCE */
+
+#define AMC_B1 0
+#define AMC_B2 1
+
+#define IOCTL_SELECT_RECEIVED_REF_CLK3A _IOR(TLCLK_IOC_MAGIC, 11, char)
+#define IOCTL_SELECT_RECEIVED_REF_CLK3B _IOR(TLCLK_IOC_MAGIC, 12, char)
+
+/* OEM COMMAND - NOT IN FINAL VERSION */
+
+#define IOCTL_TEST_MODE _IO(TLCLK_IOC_MAGIC, 13)
+
+/* HARDWARE SWITCHING DEFINE */
+
+#define HW_ENABLE 0x80
+#define HW_DISABLE 0x00
+
+#define IOCTL_HARDWARE_SWITCHING _IOR(TLCLK_IOC_MAGIC, 14, char)
+
+/* HARDWARE SWITCHING MODE DEFINE */
+
+#define PLL_HOLDOVER 0x40
+#define LOST_CLOCK 0x00
+
+#define IOCTL_HARDWARE_SWITCHING_MODE _IOR(TLCLK_IOC_MAGIC, 15, char)
+
+/* CLOCK OUTPUT DEFINE */
+
+#define IOCTL_ENABLE_CLKA0_OUTPUT _IOR(TLCLK_IOC_MAGIC, 16, char)
+#define IOCTL_ENABLE_CLKB0_OUTPUT _IOR(TLCLK_IOC_MAGIC, 17, char)
+#define IOCTL_ENABLE_CLKA1_OUTPUT _IOR(TLCLK_IOC_MAGIC, 18, char)
+#define IOCTL_ENABLE_CLKB1_OUTPUT _IOR(TLCLK_IOC_MAGIC, 19, char)
+
+#define IOCTL_ENABLE_CLK3A_OUTPUT _IOR(TLCLK_IOC_MAGIC, 20, char)
+#define IOCTL_ENABLE_CLK3B_OUTPUT _IOR(TLCLK_IOC_MAGIC, 21, char)
+
+/* ALARMS DEFINE */
+
+#define UNLOCK_MASK 0x10
+#define HOLDOVER_MASK 0x20
+#define SEC_LOST_MASK 0x40
+#define PRI_LOST_MASK 0x80
+
+#define IOCTL_READ_ALARMS _IO(TLCLK_IOC_MAGIC, 22)
+
+/* INTERRUPT CAUSE DEFINE */
+
+#define PRI_LOS_01_MASK 0x01
+#define PRI_LOS_10_MASK 0x02
+
+#define SEC_LOS_01_MASK 0x04
+#define SEC_LOS_10_MASK 0x08
+
+#define HOLDOVER_01_MASK 0x10
+#define HOLDOVER_10_MASK 0x20
+
+#define UNLOCK_01_MASK 0x40
+#define UNLOCK_10_MASK 0x80
+
+#define IOCTL_READ_INTERRUPT_SWITCH _IO(TLCLK_IOC_MAGIC, 23)
+
+#define IOCTL_READ_CURRENT_REF _IO(TLCLK_IOC_MAGIC, 25)
+
+/* MAX NUMBER OF IOCTL */
+#define TLCLK_IOC_MAXNR 25
+
+struct tlclk_alarms {
+ __u32 lost_clocks;
+ __u32 lost_primary_clock;
+ __u32 lost_secondary_clock;
+ __u32 primary_clock_back;
+ __u32 secondary_clock_back;
+ __u32 switchover_primary;
+ __u32 switchover_secondary;
+ __u32 pll_holdover;
+ __u32 pll_end_holdover;
+ __u32 pll_lost_sync;
+ __u32 pll_sync;
+};

--
--mgross
BTW: This may or may not be the opinion of my employer, more likely not.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majo...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

Marcelo Tosatti

unread,

Aug 30, 2005, 3:30:11 PM8/30/05

Mark,

Please fix identation accordingly to CodingStyle and repost, it
looks quite ugly at the moment.

On Tue, Aug 30, 2005 at 11:59:33AM -0700, Mark Gross wrote:
> The following is a driver I would like to see included in the base kernel.
>
> It allows OS controll of a device that synchronizes signaling hardware across a ATCA chassis.
>
> The telecom clock hardware doesn't interact much with the operating system, and is controlled
> via registers in the FPGA on the hardware. It is hardware that is unique to this computer.
>
> Thanks for looking at this,

Mark Gross

unread,

Aug 30, 2005, 4:40:06 PM8/30/05

On Tuesday 30 August 2005 12:16, Marcelo Tosatti wrote:
>
> Mark,
>
> Please fix identation accordingly to CodingStyle and repost, it
> looks quite ugly at the moment.
>

Sorry about that.

> On Tue, Aug 30, 2005 at 11:59:33AM -0700, Mark Gross wrote:
> > The following is a driver I would like to see included in the base kernel.
> >
> > It allows OS controll of a device that synchronizes signaling hardware across a ATCA chassis.
> >
> > The telecom clock hardware doesn't interact much with the operating system, and is controlled
> > via registers in the FPGA on the hardware. It is hardware that is unique to this computer.
> >
> > Thanks for looking at this,
>

+++ linux-2.6.13/drivers/char/tlclk.c 2005-08-30 13:21:00.275670392 -0700
@@ -0,0 +1,938 @@

+static unsigned int telclk_interrupt;
+
+static int int_events; /* Event that generate a interrupt */
+static int got_event; /* if events processing have been done */
+
+static void switchover_timeout(unsigned long data);
+static struct timer_list switchover_timer =

+TIMER_INITIALIZER(switchover_timeout, 0, 0);

+static ssize_t show_interrupt_switch(struct class_device *d, char *buf)
+{
+ unsigned long ret_val;
+ unsigned long flags;
+
+ spin_lock_irqsave(&event_lock, flags);
+ ret_val = inb(TLCLK_REG6);
+ spin_unlock_irqrestore(&event_lock, flags);
+
+ return sprintf(buf, "0x%lX\n", ret_val);
+}
+
+static CLASS_DEVICE_ATTR(interrupt_switch, S_IRUGO,
+ show_interrupt_switch, NULL);
+

+static ssize_t show_alarms(struct class_device *d, char *buf)
+{
+ unsigned long ret_val;
+ unsigned long flags;
+
+ spin_lock_irqsave(&event_lock, flags);
+ ret_val = (inb(TLCLK_REG2) & 0xf0);
+ spin_unlock_irqrestore(&event_lock, flags);
+
+ return sprintf(buf, "0x%lX\n", ret_val);
+}
+
+static CLASS_DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL);
+

+static ssize_t store_enable_clk3b_output(struct class_device *d,