REGRESSION: 3.10-rc1: Dell Latitude e6410 hangs within 3 seconds

[Arend van Spriel]

Laptop hangs pretty soon after booting. Workaround for me was to turn
off ACPI on kernel command line, ie. acpi=off

Attached is my kernel configuration.

Regards,
Arend

----8<------------------------------------------------------------------
[ 0.000000] Initializing cgroup subsys cpu

[ 0.000000] Initializing cgroup subsys cpuacct

[ 0.000000] Linux version 3.10.0-rc1-wl-testing-00002-gd445660
(root@lb-bun-3
[ 0.000000] e820: BIOS-provided physical RAM map:

[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009abff]
usable
[ 0.000000] BIOS-e820: [mem 0x000000000009ac00-0x000000000009ffff]
reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff]
reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000cf65efff]
usable
[ 0.000000] BIOS-e820: [mem 0x00000000cf65f000-0x00000000cf67efff]
ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000cf67f000-0x00000000cf76efff]
ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000cf76f000-0x00000000cfffffff]
reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff]
reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff]
reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed13fff]
reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed18000-0x00000000fed19fff]
reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff]
reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff]
reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff800000-0x00000000ffffffff]
reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000012bffffff]
usable
[ 0.000000] debug: ignoring loglevel setting.

[ 0.000000] Notice: NX (Execute Disable) protection cannot be
enabled: non-P!
[ 0.000000] SMBIOS 2.6 present.

[ 0.000000] DMI: Dell Inc. Latitude E6410/07XJP9, BIOS A07 02/15/2011

[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==>
reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable

[ 0.000000] e820: last_pfn = 0xcf65f max_arch_pfn = 0x100000

[ 0.000000] MTRR default type: uncachable

[ 0.000000] MTRR fixed ranges enabled:

[ 0.000000] 00000-9FFFF write-back

[ 0.000000] A0000-BFFFF uncachable

[ 0.000000] C0000-FFFFF write-protect

[ 0.000000] MTRR variable ranges enabled:

[ 0.000000] 0 base 000000000 mask F80000000 write-back

[ 0.000000] 1 base 080000000 mask FC0000000 write-back

[ 0.000000] 2 base 0C0000000 mask FF0000000 write-back

[ 0.000000] 3 base 100000000 mask FE0000000 write-back

[ 0.000000] 4 base 120000000 mask FF0000000 write-back

[ 0.000000] 5 base 12C000000 mask FFC000000 uncachable

[ 0.000000] 6 disabled

[ 0.000000] 7 disabled

[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new
0x7010600070106
[ 0.000000] e820: update [mem 0xd0000000-0xffffffff] usable ==>
reserved
[ 0.000000] found SMP MP-table at [mem 0x000f2200-0x000f220f] mapped
at [c00]
[ 0.000000] Scanning 1 areas for low memory corruption

[ 0.000000] initial memory mapped: [mem 0x00000000-0x01bfffff]

[ 0.000000] Base memory trampoline at [c0096000] 96000 size 16384

[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]

[ 0.000000] [mem 0x00000000-0x000fffff] page 4k

[ 0.000000] init_memory_mapping: [mem 0x36800000-0x36bfffff]

[ 0.000000] [mem 0x36800000-0x36bfffff] page 2M

[ 0.000000] init_memory_mapping: [mem 0x30000000-0x367fffff]

[ 0.000000] [mem 0x30000000-0x367fffff] page 2M

[ 0.000000] init_memory_mapping: [mem 0x00100000-0x2fffffff]

[ 0.000000] [mem 0x00100000-0x003fffff] page 4k

[ 0.000000] [mem 0x00400000-0x2fffffff] page 2M

[ 0.000000] init_memory_mapping: [mem 0x36c00000-0x377fdfff]

[ 0.000000] [mem 0x36c00000-0x373fffff] page 2M

[ 0.000000] [mem 0x37400000-0x377fdfff] page 4k

[ 0.000000] BRK [0x018df000, 0x018dffff] PGTABLE

[ 0.000000] RAMDISK: [mem 0x36d06000-0x3767afff]

[ 0.000000] ACPI: RSDP 000fe300 00024 (v02 DELL )

[ 0.000000] ACPI: XSDT cf67de18 00064 (v01 DELL E2 06222004
MSFT 000)
[ 0.000000] ACPI: FACP cf75fc18 000F4 (v04 DELL E2 06222004
MSFT 000)
[ 0.000000] ACPI Warning: 32/64 FACS address mismatch in FADT - two
FACS tab)
[ 0.000000] ACPI BIOS Bug: Warning: 32/64X FACS address mismatch in
FADT - 0)
[ 0.000000] ACPI: DSDT cf73e018 0A24E (v01 DELL E2 00001001
INTL 200)
[ 0.000000] ACPI: FACS cf76bf40 00040

[ 0.000000] ACPI: APIC cf67cf18 0008C (v02 DELL E2 06222004
MSFT 000)
[ 0.000000] ACPI: TCPA cf76dd18 00032 (v02 00000000
000)
[ 0.000000] ACPI: MCFG cf76dc98 0003C (v01 A M I GMCH945. 06222004
MSFT 000)
[ 0.000000] ACPI: HPET cf76dc18 00038 (v01 DELL E2 00000001
ASL 000)
[ 0.000000] ACPI: BOOT cf76db98 00028 (v01 DELL E2 06222004
AMI 000)
[ 0.000000] ACPI: SLIC cf766818 00176 (v03 DELL E2 06222004
MSFT 000)
[ 0.000000] ACPI: SSDT cf74d018 009F1 (v01 PmRef CpuPm 00003000
INTL 200)
[ 0.000000] ACPI: Local APIC address 0xfee00000

[ 0.000000] 2430MB HIGHMEM available.

[ 0.000000] 887MB LOWMEM available.

[ 0.000000] mapped low ram: 0 - 377fe000

[ 0.000000] low ram: 0 - 377fe000

[ 0.000000] BRK [0x018e0000, 0x018e0fff] PGTABLE

[ 0.000000] Zone ranges:

[ 0.000000] DMA [mem 0x00001000-0x00ffffff]

[ 0.000000] Normal [mem 0x01000000-0x377fdfff]

[ 0.000000] HighMem [mem 0x377fe000-0xcf65efff]

[ 0.000000] Movable zone start for each node

[ 0.000000] Early memory node ranges

[ 0.000000] node 0: [mem 0x00001000-0x00099fff]

[ 0.000000] node 0: [mem 0x00100000-0xcf65efff]

[ 0.000000] On node 0 totalpages: 849400

[ 0.000000] DMA zone: 32 pages used for memmap

[ 0.000000] DMA zone: 0 pages reserved

[ 0.000000] DMA zone: 3993 pages, LIFO batch:0

[ 0.000000] Normal zone: 1744 pages used for memmap

[ 0.000000] Normal zone: 223230 pages, LIFO batch:31

[ 0.000000] HighMem zone: 4861 pages used for memmap

[ 0.000000] HighMem zone: 622177 pages, LIFO batch:31

[ 0.000000] Using APIC driver default

[ 0.000000] ACPI: PM-Timer IO Port: 0x408

[ 0.000000] ACPI: Local APIC address 0xfee00000

[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)

[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)

[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)

[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x05] enabled)

[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] disabled)

[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] disabled)

[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x06] disabled)

[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] disabled)

[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])

[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI
0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)

[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high
level)
[ 0.000000] ACPI: IRQ0 used by override.

[ 0.000000] ACPI: IRQ2 used by override.

[ 0.000000] ACPI: IRQ9 used by override.

[ 0.000000] Using ACPI (MADT) for SMP configuration information

[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000

[ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs

[ 0.000000] nr_irqs_gsi: 40

[ 0.000000] PM: Registered nosave memory: 000000000009a000 -
000000000009b000
[ 0.000000] PM: Registered nosave memory: 000000000009b000 -
00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 -
00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 -
0000000000100000
[ 0.000000] e820: [mem 0xd0000000-0xf7ffffff] available for PCI
devices
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8
nr_node_i1
[ 0.000000] PERCPU: Embedded 13 pages/cpu @f540f000 s31968 r0 d21280
u53248
[ 0.000000] pcpu-alloc: s31968 r0 d21280 u53248 alloc=13*4096

[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0]
7
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on.
Total pa4
[ 0.000000] Kernel command line:
BOOT_IMAGE=/boot/vmlinuz-3.10.0-rc1-wl-testt
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)

[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288
bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144
bytes)
[ 0.000000] Initializing CPU#0

[ 0.000000] Initializing HighMem for node 0 (000377fe:000cf65f)

[ 0.000000] Memory: 3350848k/3398012k available (5049k kernel code,
46752k r)
[ 0.000000] virtual kernel memory layout:

[ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)

[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)

[ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)

[ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)

[ 0.000000] .init : 0xc1764000 - 0xc17fa000 ( 600 kB)

[ 0.000000] .data : 0xc14ee665 - 0xc1763a40 (2516 kB)

[ 0.000000] .text : 0xc1000000 - 0xc14ee665 (5049 kB)

[ 0.000000] Checking if this processor honours the WP bit even in
supervisor.
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8,
Nodes=1
[ 0.000000] Hierarchical RCU implementation.

[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.

[ 0.000000] NR_IRQS:2304 nr_irqs:744 16

[ 0.000000] CPU 0 irqstacks, hard=f4c0a000 soft=f4c0c000

[ 0.000000] Console: colour VGA+ 80x25

[ 0.000000] console [tty0] enabled

[ 0.000000] console [ttyS0] enabled

[ 0.000000] hpet clockevent registered

[ 0.000000] tsc: Fast TSC calibration using PIT

[ 0.004000] tsc: Detected 2792.999 MHz processor

[ 0.000001] Calibrating delay loop (skipped), value calculated using
timer f)
[ 0.010834] pid_max: default: 32768 minimum: 301

[ 0.015537] Security Framework initialized

[ 0.019702] AppArmor: AppArmor initialized

[ 0.023893] Mount-cache hash table entries: 512

[ 0.028633] Initializing cgroup subsys devices

[ 0.033143] Initializing cgroup subsys freezer

[ 0.037652] Initializing cgroup subsys net_cls

[ 0.042179] CPU: Physical Processor ID: 0

[ 0.046253] CPU: Processor Core ID: 0

[ 0.049983] mce: CPU supports 9 MCE banks

[ 0.054063] CPU0: Thermal monitoring handled by SMI

[ 0.059014] Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7

[ 0.059014] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32

[ 0.059014] tlb_flushall_shift: 6

[ 0.073628] Freeing SMP alternatives: 20k freed

[ 0.078227] ACPI: Core revision 20130328

[ 0.085740] ACPI: All ACPI Tables successfully acquired

[ 0.092143] ftrace: allocating 21528 entries in 43 pages

[ 0.105535] Enabling APIC mode: Flat. Using 1 I/O APICs

[ 0.111412] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0

[ 0.157029] smpboot: CPU0: Intel(R) Core(TM) i7 CPU M 640 @
2.80GHz ()
[ 0.275218] Performance Events: PEBS fmt1+, 16-deep LBR, Westmere
events, In.
[ 0.285584] perf_event_intel: CPUID marked event: 'bus cycles'
unavailable
[ 0.292524] ... version: 3

[ 0.296595] ... bit width: 48

[ 0.300753] ... generic registers: 4

[ 0.304824] ... value mask: 0000ffffffffffff

[ 0.310197] ... max period: 000000007fffffff

[ 0.315571] ... fixed-purpose events: 3

[ 0.319641] ... event mask: 000000070000000f

[ 0.325775] CPU 1 irqstacks, hard=f4ce4000 soft=f4ce6000

[ 0.331152] smpboot: Booting Node 0, Processors #1[ 0.346419]
Initiali1
[ 0.349505] CPU1: Thermal monitoring handled by SMI



[ 0.356555] CPU 2 irqstacks, hard=f4d20000 soft=f4d22000

[ 0.362180] #2[ 0.373978] Initializing CPU#2

[ 0.377064] CPU2: Thermal monitoring handled by SMI



[ 0.384131] CPU 3 irqstacks, hard=f4d38000 soft=f4d3a000

[ 0.389754] #3[ 0.401551] Initializing CPU#3

[ 0.404636] CPU3: Thermal monitoring handled by SMI



[ 0.411618] Brought up 4 CPUs

[ 0.414894] smpboot: Total of 4 processors activated (22343.99
BogoMIPS)
[ 0.423745] devtmpfs: initialized

[ 0.427318] PM: Registering ACPI NVS region [mem
0xcf67f000-0xcf76efff] (983)
[ 0.436117] regulator-dummy: no parameters

[ 0.440306] RTC time: 12:52:59, date: 05/14/13

[ 0.444848] NET: Registered protocol family 16

[ 0.449472] ACPI FADT declares the system doesn't support PCIe ASPM,
so disat
[ 0.457114] ACPI: bus type PCI registered

[ 0.461231] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem
0xf8000000-0xf)
[ 0.470613] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in
E820
[ 0.477463] PCI: Using MMCONFIG for extended config space

[ 0.482922] PCI: Using configuration type 1 for base access

[ 0.488563] dmi type 0xB1 record - unknown flag

[ 0.493755] bio: create slab <bio-0> at 0

[ 0.497914] ACPI: Added _OSI(Module Device)

[ 0.502159] ACPI: Added _OSI(Processor Device)

[ 0.506664] ACPI: Added _OSI(3.0 _SCP Extensions)

[ 0.511429] ACPI: Added _OSI(Processor Aggregator Device)

[ 0.517791] ACPI: EC: Look up EC in DSDT

[ 0.544702] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored

[ 0.603840] ACPI: SSDT cf7eaa18 004B6 (v01 PmRef Cpu0Ist 00003000
INTL 200)
[ 0.611831] ACPI: Dynamic OEM Table Load:

[ 0.616028] ACPI: SSDT (null) 004B6 (v01 PmRef Cpu0Ist 00003000
INTL 200)
[ 0.623893] ACPI: SSDT cf7e8018 00891 (v01 PmRef Cpu0Cst 00003001
INTL 200)
[ 0.631864] ACPI: Dynamic OEM Table Load:

[ 0.636064] ACPI: SSDT (null) 00891 (v01 PmRef Cpu0Cst 00003001
INTL 200)
[ 0.663834] ACPI: SSDT cf7e9a98 00303 (v01 PmRef ApIst 00003000
INTL 200)
[ 0.671854] ACPI: Dynamic OEM Table Load:

[ 0.676050] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000
INTL 200)
[ 0.692936] ACPI: SSDT cf7e7d98 00119 (v01 PmRef ApCst 00003000
INTL 200)
[ 0.700925] ACPI: Dynamic OEM Table Load:

[ 0.705125] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000
INTL 200)
[ 0.783821] ACPI: Interpreter enabled

[ 0.787557] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep
State [\_S1)
[ 0.796982] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep
State [\_S2)
[ 0.806413] ACPI: (supports S0 S3 S4 S5)

[ 0.810397] ACPI: Using IOAPIC for interrupt routing

[ 0.815447] PCI: Using host bridge windows from ACPI; if necessary,
use "pcig
[ 1.621352] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])

[ 1.627623] \_SB_.PCI0:_OSC invalid UUID

[ 1.631608] _OSC request data:1 8 0

[ 1.636004] PCI host bridge to bus 0000:00

[ 1.640164] pci_bus 0000:00: root bus resource [bus 00-3e]

[ 1.645712] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]

[ 1.651956] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]

[ 1.658196] pci_bus 0000:00: root bus resource [mem
0x000a0000-0x000bffff]
[ 1.665133] pci_bus 0000:00: root bus resource [mem
0xd0000000-0xfeafffff]
[ 1.672079] pci 0000:00:00.0: [8086:0044] type 00 class 0x060000

[ 1.678220] pci 0000:00:01.0: [8086:0045] type 01 class 0x060400

[ 1.684318] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold

[ 1.690487] pci 0000:00:01.0: System wakeup disabled by ACPI

[ 1.696269] pci 0000:00:19.0: [8086:10ea] type 00 class 0x020000

[ 1.702361] pci 0000:00:19.0: reg 10: [mem 0xe9600000-0xe961ffff]

[ 1.708527] pci 0000:00:19.0: reg 14: [mem 0xe9680000-0xe9680fff]

[ 1.714696] pci 0000:00:19.0: reg 18: [io 0x8040-0x805f]

[ 1.720245] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold

[ 1.726431] pci 0000:00:19.0: System wakeup disabled by ACPI

[ 1.732185] pci 0000:00:1a.0: [8086:3b3c] type 00 class 0x0c0320

[ 1.738279] pci 0000:00:1a.0: reg 10: [mem 0xe9670000-0xe96703ff]

[ 1.744540] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold

[ 1.750737] pci 0000:00:1a.0: System wakeup disabled by ACPI

[ 1.756494] pci 0000:00:1b.0: [8086:3b56] type 00 class 0x040300

[ 1.762581] pci 0000:00:1b.0: reg 10: [mem 0xe9660000-0xe9663fff
64bit]
[ 1.769350] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold

[ 1.775532] pci 0000:00:1b.0: System wakeup disabled by ACPI

[ 1.781282] pci 0000:00:1c.0: [8086:3b42] type 01 class 0x060400

[ 1.787447] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold

[ 1.793628] pci 0000:00:1c.0: System wakeup disabled by ACPI

[ 1.799379] pci 0000:00:1c.1: [8086:3b44] type 01 class 0x060400

[ 1.805546] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold

[ 1.811729] pci 0000:00:1c.1: System wakeup disabled by ACPI

[ 1.817477] pci 0000:00:1c.2: [8086:3b46] type 01 class 0x060400

[ 1.823643] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold

[ 1.829830] pci 0000:00:1c.2: System wakeup disabled by ACPI

[ 1.835580] pci 0000:00:1c.3: [8086:3b48] type 01 class 0x060400

[ 1.841744] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold

[ 1.847929] pci 0000:00:1c.3: System wakeup disabled by ACPI

[ 1.853688] pci 0000:00:1d.0: [8086:3b34] type 00 class 0x0c0320

[ 1.859778] pci 0000:00:1d.0: reg 10: [mem 0xe9650000-0xe96503ff]

[ 1.866040] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold

[ 1.872239] pci 0000:00:1d.0: System wakeup disabled by ACPI

[ 1.877987] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401

[ 1.884133] pci 0000:00:1e.0: System wakeup disabled by ACPI

[ 1.889883] pci 0000:00:1f.0: [8086:3b07] type 00 class 0x060100

[ 1.896096] pci 0000:00:1f.2: [8086:3b2f] type 00 class 0x010601

[ 1.902191] pci 0000:00:1f.2: reg 10: [io 0x8090-0x8097]

[ 1.907659] pci 0000:00:1f.2: reg 14: [io 0x8080-0x8083]

[ 1.913128] pci 0000:00:1f.2: reg 18: [io 0x8070-0x8077]

[ 1.918600] pci 0000:00:1f.2: reg 1c: [io 0x8060-0x8063]

[ 1.924071] pci 0000:00:1f.2: reg 20: [io 0x8020-0x803f]

[ 1.929543] pci 0000:00:1f.2: reg 24: [mem 0xe9640000-0xe96407ff]

[ 1.935764] pci 0000:00:1f.2: PME# supported from D3hot

[ 1.941114] pci 0000:00:1f.3: [8086:3b30] type 00 class 0x0c0500

[ 1.947202] pci 0000:00:1f.3: reg 10: [mem 0xe9630000-0xe96300ff
64bit]
[ 1.953907] pci 0000:00:1f.3: reg 20: [io 0x8000-0x801f]

[ 1.959452] pci 0000:00:1f.6: [8086:3b32] type 00 class 0x118000

[ 1.965545] pci 0000:00:1f.6: reg 10: [mem 0xe9620000-0xe9620fff
64bit]
[ 1.972396] pci 0000:01:00.0: [10de:0a6c] type 00 class 0x030000

[ 1.978472] pci 0000:01:00.0: reg 10: [mem 0xe2000000-0xe2ffffff]

[ 1.984635] pci 0000:01:00.0: reg 14: [mem 0xd0000000-0xdfffffff
64bit pref]
[ 1.991754] pci 0000:01:00.0: reg 1c: [mem 0xe0000000-0xe1ffffff
64bit pref]
[ 1.998870] pci 0000:01:00.0: reg 24: [io 0x7000-0x707f]

[ 2.004338] pci 0000:01:00.0: reg 30: [mem 0xe3000000-0xe307ffff
pref]
[ 2.010991] pci 0000:01:00.1: [10de:0be3] type 00 class 0x040300

[ 2.017064] pci 0000:01:00.1: reg 10: [mem 0xe3080000-0xe3083fff]

[ 2.023312] pci 0000:00:01.0: PCI bridge to [bus 01]

[ 2.028340] pci 0000:00:01.0: bridge window [io 0x7000-0x7fff]

[ 2.034496] pci 0000:00:01.0: bridge window [mem
0xd0000000-0xe30fffff]
[ 2.041411] pci 0000:00:1c.0: PCI bridge to [bus 02]

[ 2.046441] pci 0000:00:1c.0: bridge window [io 0x6000-0x6fff]

[ 2.052601] pci 0000:00:1c.0: bridge window [mem
0xe8200000-0xe95fffff]
[ 2.059595] pci 0000:03:00.0: [14e4:4353] type 00 class 0x028000

[ 2.065737] pci 0000:03:00.0: reg 10: [mem 0xe6e00000-0xe6e03fff
64bit]
[ 2.072674] pci 0000:03:00.0: supports D1 D2

[ 2.077005] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold

[ 2.083244] pci 0000:03:00.0: System wakeup disabled by ACPI

[ 2.098241] pci 0000:00:1c.1: PCI bridge to [bus 03]

[ 2.103273] pci 0000:00:1c.1: bridge window [io 0x5000-0x5fff]

[ 2.109432] pci 0000:00:1c.1: bridge window [mem
0xe6e00000-0xe81fffff]
[ 2.116421] pci 0000:04:00.0: [1180:e476] type 02 class 0x060700

[ 2.122556] pci 0000:04:00.0: reg 10: [mem 0xe5940000-0xe5940fff]

[ 2.128831] pci 0000:04:00.0: supports D1 D2

[ 2.133163] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot
D3cold
[ 2.139915] pci 0000:04:00.0: System wakeup disabled by ACPI

[ 2.145725] pci 0000:04:00.1: [1180:e822] type 00 class 0x080501

[ 2.151862] pci 0000:04:00.1: reg 10: [mem 0xe5930000-0xe59300ff]

[ 2.158221] pci 0000:04:00.1: supports D1 D2

[ 2.162552] pci 0000:04:00.1: PME# supported from D0 D1 D2 D3hot
D3cold
[ 2.169392] pci 0000:04:00.4: [1180:e832] type 00 class 0x0c0010

[ 2.175528] pci 0000:04:00.4: reg 10: [mem 0xe5900000-0xe59007ff]

[ 2.181888] pci 0000:04:00.4: supports D1 D2

[ 2.186221] pci 0000:04:00.4: PME# supported from D0 D1 D2 D3hot
D3cold
[ 2.198341] pci 0000:00:1c.2: PCI bridge to [bus 04-05]

[ 2.203632] pci 0000:00:1c.2: bridge window [io 0x2000-0x3fff]

[ 2.209792] pci 0000:00:1c.2: bridge window [mem
0xe3100000-0xe59fffff]
[ 2.216783] pci_bus 0000:05: busn_res: can not insert [bus 05-ff]
under [bus)
[ 2.227690] pci_bus 0000:05: busn_res: [bus 05-ff] end is updated to
08
[ 2.234370] pci_bus 0000:05: busn_res: can not insert [bus 05-08]
under [bus)
[ 2.245277] pci_bus 0000:05: [bus 05-08] partially hidden behind
bridge 0000]
[ 2.253817] pci 0000:00:1c.3: PCI bridge to [bus 06-0b]

[ 2.259109] pci 0000:00:1c.3: bridge window [io 0x4000-0x4fff]

[ 2.265270] pci 0000:00:1c.3: bridge window [mem
0xe5a00000-0xe6dfffff]
[ 2.272204] pci 0000:00:1e.0: PCI bridge to [bus 0c] (subtractive
decode)
[ 2.279065] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7]
(subtracti)
[ 2.287057] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff]
(subtracti)
[ 2.295048] pci 0000:00:1e.0: bridge window [mem
0x000a0000-0x000bffff] (s)
[ 2.305410] pci 0000:00:1e.0: bridge window [mem
0xd0000000-0xfeafffff] (s)
[ 2.314125] pci_bus 0000:00: on NUMA node 0

[ 2.318402] \_SB_.PCI0:_OSC invalid UUID

[ 2.322385] _OSC request data:1 1f 0

[ 2.326362] acpi PNP0A08:00: ACPI _OSC support notification failed,
disablinM
[ 2.334442] acpi PNP0A08:00: Unable to request _OSC control (_OSC
support ma)
[ 2.454859] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12
14 15) *1
[ 2.463029] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12
14 15) *0
[ 2.471194] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 *5 6 7 10 12
14 15)
[ 2.479021] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12
14 15) *0
[ 2.487183] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 *3 4 5 6 7 10 12
14 15)
[ 2.495008] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12
14 15) *.
[ 2.504103] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12
14 15) *1
[ 2.512265] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12
14 15) *.
[ 2.569577] ACPI: PCI Root Bridge [CPBG] (domain 0000 [bus 3f])

[ 2.575602] PCI host bridge to bus 0000:3f

[ 2.579762] pci_bus 0000:3f: root bus resource [bus 3f]

[ 2.585053] pci 0000:3f:00.0: [8086:2c62] type 00 class 0x060000

[ 2.591150] pci 0000:3f:00.1: [8086:2d01] type 00 class 0x060000

[ 2.597248] pci 0000:3f:02.0: [8086:2d10] type 00 class 0x060000

[ 2.603344] pci 0000:3f:02.1: [8086:2d11] type 00 class 0x060000

[ 2.609438] pci 0000:3f:02.2: [8086:2d12] type 00 class 0x060000

[ 2.615533] pci 0000:3f:02.3: [8086:2d13] type 00 class 0x060000

[ 2.621635] pci_bus 0000:3f: on NUMA node 0

[ 2.625881] acpi PNP0A03:00: ACPI _OSC support notification failed,
disablinM
[ 2.633960] acpi PNP0A03:00: Unable to request _OSC control (_OSC
support ma)
[ 2.694026] ACPI: Enabled 3 GPEs in block 00 to 3F

[ 2.699012] acpi root: \_SB_.PCI0 notify handler is installed

[ 2.704846] acpi root: \_SB_.CPBG notify handler is installed

[ 2.710662] Found 2 acpi root devices

[ 2.714424] ACPI: EC: GPE = 0x10, I/O: command/status = 0x934, data =
0x930
[ 2.741752] ACPI: No dock devices found.

[ 2.745780] vgaarb: device added:
PCI:0000:01:00.0,decodes=io+mem,owns=io+mee
[ 2.753946] vgaarb: loaded

[ 2.756714] vgaarb: bridge control possible 0000:01:00.0

[ 2.762152] SCSI subsystem initialized

[ 2.765963] ACPI: bus type ATA registered

[ 2.770066] libata version 3.00 loaded.

[ 2.773977] ACPI: bus type USB registered

[ 2.778058] usbcore: registered new interface driver usbfs

[ 2.783610] usbcore: registered new interface driver hub

[ 2.789001] usbcore: registered new device driver usb

[ 2.794199] wmi: Mapper loaded

[ 2.797314] PCI: Using ACPI for IRQ routing

[ 2.803707] PCI: pci_cache_line_size set to 64 bytes

[ 2.808923] e820: reserve RAM buffer [mem 0x0009ac00-0x0009ffff]

[ 2.814993] e820: reserve RAM buffer [mem 0xcf65f000-0xcfffffff]

[ 2.821125] NetLabel: Initializing

[ 2.824590] NetLabel: domain hash size = 128

[ 2.829007] NetLabel: protocols = UNLABELED CIPSOv4

[ 2.834038] NetLabel: unlabeled traffic allowed by default

[ 2.839746] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0

[ 2.846558] hpet0: 8 comparators, 64-bit 14.318180 MHz counter

[ 2.854467] Switching to clocksource hpet

[ 2.862291] AppArmor: AppArmor Filesystem Enabled

[ 2.867097] pnp: PnP ACPI init

[ 2.870224] ACPI: bus type PNP registered

[ 2.874342] pnp 00:00: [dma 4]

[ 2.877483] pnp 00:00: Plug and Play ACPI device, IDs PNP0200
(active)
[ 2.884094] pnp 00:01: Plug and Play ACPI device, IDs INT0800
(active)
[ 2.890770] pnp 00:02: Plug and Play ACPI device, IDs PNP0103
(active)
[ 2.897396] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04
(active)
[ 2.904028] system 00:04: [io 0x0680-0x069f] has been reserved

[ 2.910016] system 00:04: [io 0x1000-0x1003] has been reserved

[ 2.916005] system 00:04: [io 0x1004-0x1013] has been reserved

[ 2.921994] system 00:04: [io 0xffff] has been reserved

[ 2.927373] system 00:04: [io 0x0400-0x047f] has been reserved

[ 2.933361] system 00:04: [io 0x0500-0x057f] has been reserved

[ 2.939348] system 00:04: [io 0x164e-0x164f] has been reserved

[ 2.945338] system 00:04: Plug and Play ACPI device, IDs PNP0c02
(active)
[ 2.952213] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00
(active)
[ 2.958831] pnp 00:06: Plug and Play ACPI device, IDs PNP0303
(active)

[Rafael J. Wysocki]

On Tuesday, May 14, 2013 03:03:58 PM Arend van Spriel wrote:
> Laptop hangs pretty soon after booting. Workaround for me was to turn
> off ACPI on kernel command line, ie. acpi=off
>
> Attached is my kernel configuration.

Well, I have no idea what may be the source of this.

Any chance to bisect?

Rafael


--
I speak only for myself.
Rafael J. Wysocki, Intel Open Source Technology Center.
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majo...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

[Arend van Spriel]

On 05/14/2013 10:34 PM, Rafael J. Wysocki wrote:
> On Tuesday, May 14, 2013 03:03:58 PM Arend van Spriel wrote:
>> Laptop hangs pretty soon after booting. Workaround for me was to turn
>> off ACPI on kernel command line, ie. acpi=off
>>
>> Attached is my kernel configuration.
>
> Well, I have no idea what may be the source of this.

Me neither.

> Any chance to bisect?

can try. Rebuilding kernels can be a drag :-p

Regards,
Arend

[Arend van Spriel]

On 05/14/2013 10:38 PM, Arend van Spriel wrote:
> On 05/14/2013 10:34 PM, Rafael J. Wysocki wrote:
>> On Tuesday, May 14, 2013 03:03:58 PM Arend van Spriel wrote:
>>> Laptop hangs pretty soon after booting. Workaround for me was to turn
>>> off ACPI on kernel command line, ie. acpi=off
>>>
>>> Attached is my kernel configuration.
>>
>> Well, I have no idea what may be the source of this.
>
> Me neither.
>
>> Any chance to bisect?
>
> can try. Rebuilding kernels can be a drag :-p
>
> Regards,
> Arend

Hi Rafael,

The bisect result found commit c0f4dfd4f as culprit. I also verified
that the merge into Linus' tree introduced the issue upstream, ie.
6c24499 works and 1f889ec does not. I tried to revert the commit, but
that was a bit risky (conflict to resolve) and did not give me a stable
kernel. The only thing that works is selecting acpi=off. I tried also
nohz=off but that resulted in /init failure.

Regards,
Arend

---8<----------------------------------------------------------------

commit 1f889ec62c3f0d8913f3c32f9aff2a1e15099346
Merge: 6c24499 8fcfae3

commit 8fcfae31719c0a6c03f2cf63f815b46d378d8be4
Merge: d02a9a8 6d87669

commit 6d87669357936bffa1e8fea7a4e7743e76905736
Merge: 3f944ad 81e5949 910ee45

commit c0f4dfd4f90f1667d234d21f15153ea09a2eaa66
Author: Paul E. McKenney <paul.m...@linaro.org>
Date: Fri Dec 28 11:30:36 2012 -0800

rcu: Make RCU_FAST_NO_HZ take advantage of numbered callbacks

Because RCU callbacks are now associated with the number
of the grace period that they must wait for, CPUs can now
take advance callbacks corresponding to grace periods that
ended while a given CPU was in dyntick-idle mode. This
eliminates the need to try forcing the RCU state machine
while entering idle, thus reducing the CPU intensiveness
of RCU_FAST_NO_HZ, which should increase its energy
efficiency.

Signed-off-by: Paul E. McKenney <paul.m...@linaro.org>
Signed-off-by: Paul E. McKenney <pau...@linux.vnet.ibm.com>

[Rafael J. Wysocki]

Hi Paul,

Is this known?

Rafael

--
I speak only for myself.
Rafael J. Wysocki, Intel Open Source Technology Center.

[Paul E. McKenney]

Hello, Arend,

Thank you for tracking this down! Could you please try out the following
patch?

Thanx, Paul

------------------------------------------------------------------------

rcu: Fix comparison sense in rcu_needs_cpu()

Commit c0f4dfd4f (rcu: Make RCU_FAST_NO_HZ take advantage of numbered
callbacks) introduced a bug that can result in excessively long grace
periods. This bug reverse the senes of the "if" statement checking
for lazy callbacks, so that RCU takes a lazy approach when there are
in fact non-lazy callbacks. This can result in excessive boot, suspend,
and resume times.

This commit therefore fixes the sense of this "if" statement.

Reported-by: Borislav Petkov <b...@alien8.de>
Reported-by: Bj�rn Mork <bj...@mork.no>
Reported-by: Joerg Roedel <jo...@8bytes.org>

Signed-off-by: Paul E. McKenney <pau...@linux.vnet.ibm.com>

Tested-by: Bj�rn Mork <bj...@mork.no>
Tested-by: Joerg Roedel <jo...@8bytes.org>

diff --git a/kernel/rcutree_plugin.h b/kernel/rcutree_plugin.h
index 170814d..6d939a6 100644
--- a/kernel/rcutree_plugin.h
+++ b/kernel/rcutree_plugin.h
@@ -1667,7 +1667,7 @@ int rcu_needs_cpu(int cpu, unsigned long *dj)
rdtp->last_accelerate = jiffies;

/* Request timer delay depending on laziness, and round. */
- if (rdtp->all_lazy) {
+ if (!rdtp->all_lazy) {
*dj = round_up(rcu_idle_gp_delay + jiffies,
rcu_idle_gp_delay) - jiffies;
} else {

[Arend van Spriel]

Thanks, Paul

That did the trick. Made me bumping into another regression in the
driver I am maintaining so more fun to do :-)

Looking at the commit message I guess it is already in some tree.
Otherwise I would have said: "You may add

Tested-by: Arend van Spriel <ar...@broadcom.com>"

> ------------------------------------------------------------------------
>
> rcu: Fix comparison sense in rcu_needs_cpu()
>
> Commit c0f4dfd4f (rcu: Make RCU_FAST_NO_HZ take advantage of numbered
> callbacks) introduced a bug that can result in excessively long grace
> periods. This bug reverse the senes of the "if" statement checking

Oh, there is a typo in the commit message: sense iso senes.

> for lazy callbacks, so that RCU takes a lazy approach when there are
> in fact non-lazy callbacks. This can result in excessive boot, suspend,
> and resume times.
>
> This commit therefore fixes the sense of this "if" statement.
>
> Reported-by: Borislav Petkov<b...@alien8.de>
> Reported-by: Bj�rn Mork<bj...@mork.no>
> Reported-by: Joerg Roedel<jo...@8bytes.org>
> Signed-off-by: Paul E. McKenney<pau...@linux.vnet.ibm.com>
> Tested-by: Bj�rn Mork<bj...@mork.no>
> Tested-by: Joerg Roedel<jo...@8bytes.org>

Gr. AvS

[Paul E. McKenney]

Thank you for trying it out, and glad that it worked for you!

And I did already send the pull request. But if I need to re-send it,
I will update to add your Tested-by.

Thanx, Paul