Problem with KVM switch and Screen Res...
Frank Charles Gallacher
I am running Debian GNU/Linux ("etch" kernel 2.6.18-6-686) on a PC with
an NVIDIA GeForce 6600 GT connected to a COMPAQ S710 Monitor.
I have just upgraded to the latest NVIDIA driver, using
"nvidia-installer".
It works fine, the only problem I having is when I introduce my trusty
KVM (Keyboard-Video-Mouse) switch, the thing that lets me swap between 2
PCs...
When I boot up with it connected, the Hardware Probe that checks the
capability of the Screen defaults back to 640x480, rather than 1280x1024
when the Monitor is plugged in directly; consequently I get a little
claustraphobic when trying to use it in this fashion...
Running Red Hat Linux 9, I could cheat by installing the OS with the
screen connected directly, then introduce the KVM into the loop after
the install and boot it up OK; Debian appears to be smarter and checks
it at boot time instead...
Is there a way to force the issue, and get X to start in 1280x1024 mode
with the KVM switch connected???
Thanking you, fcG.
--
Frank Charles Gallacher <fra...@bigpond.com>
--
To UNSUBSCRIBE, email to debian-us...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listm...@lists.debian.org
Raj Kiran Grandhi
> Greetings,
> I am running Debian GNU/Linux ("etch" kernel 2.6.18-6-686) on a PC with
> an NVIDIA GeForce 6600 GT connected to a COMPAQ S710 Monitor.
> I have just upgraded to the latest NVIDIA driver, using
> "nvidia-installer".
> It works fine, the only problem I having is when I introduce my trusty
> KVM (Keyboard-Video-Mouse) switch, the thing that lets me swap between 2
> PCs...
>
> When I boot up with it connected, the Hardware Probe that checks the
> capability of the Screen defaults back to 640x480, rather than 1280x1024
> when the Monitor is plugged in directly; consequently I get a little
> claustraphobic when trying to use it in this fashion...
>
> Running Red Hat Linux 9, I could cheat by installing the OS with the
> screen connected directly, then introduce the KVM into the loop after
> the install and boot it up OK; Debian appears to be smarter and checks
> it at boot time instead...
>
> Is there a way to force the issue, and get X to start in 1280x1024 mode
> with the KVM switch connected???
I had the same problem when my computer boots up with the monitor
switched off. This problem occurs because the nvidia driver queries the
monitor for the modes it can support and disables those modes if the
monitor is switched off (or can't be queried because of the KVM switch)
You can get around this by saving the edid data from the monitor to a
file and load the file at X startup instead of querying the monitor
every time. Run nvidia-settings, select your monitor and "Acquire EDID".
Save the edid to some file. Then under the "Device" section of your
/etc/X11/xorg.conf file, add the line:
Option "CustomEDID" "CRT-0:/root/edid.bin"
assuming your monitor is called CRT-0 and you have saved the edid file
at /root/edid.bin
>
> Thanking you, fcG.
>
--
Raj Kiran Grandhi
--
At the source of every error which is blamed on the computer, you will
find at least two human errors, including the error of blaming it on the
computer.
Frank Charles Gallacher
(I am amazed at the response and accuracy of debian lists;
I must be learning how to suck eggs...)
TA, fcG.