I tried to install 2.6.30-bpo but the update-initramfs script send me
the following error msg. I tried to find this bin on the net but
nothing.
Is this a debian kernel bug or any body have this firmware file ? I
would need them beacuse the I use this devices in the server.
Running depmod.
Running update-initramfs.
update-initramfs: Generating /boot/initrd.img-2.6.30-bpo.1-amd64
W: Possible missing firmware /lib/firmware/tigon/tg3_tso5.bin for module tg3
W: Possible missing firmware /lib/firmware/tigon/tg3_tso.bin for module tg3
W: Possible missing firmware /lib/firmware/tigon/tg3.bin for module tg3
W: Possible missing firmware /lib/firmware/ql8100_fw.bin for module qla2xxx
Examining /etc/kernel/postinst.d.
run-parts: executing /etc/kernel/postinst.d/initramfs-tools
Kind Regards,
Szabolcs Toth
----------------------------------------------------------------
This message was sent using IMP, the Internet Messaging Program.
--
To UNSUBSCRIBE, email to debian-ker...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listm...@lists.debian.org
Basically add non-free to sources.list and then do:
apt-get update
apt-get install firmware-linux
Kushal Koolwal
I do blog at http://blogs.koolwal.net/
_________________________________________________________________
Get free photo software from Windows Live
http://www.windowslive.com/online/photos?ocid=PID23393::T:WLMTAGL:ON:WL:en-US:SI_PH_software:082009
Thanx for your answare, but I have already installed the
firmware-linux and other firmware packages. I search for the
tg3_tso5.bin tg3_tso.bin tg3.bin ql8100_fw.bin file on tha
packages.debian.org in all dist(stable,unstable,experimental) but
nothing. I search for it with google too but nothing.
Quoting "Kushal Koolwal" <kushal...@hotmail.com>:
firmware-linux
>
> I think I had the same problem.
> See this:
> http://blogs.koolwal.net/2009/05/11/tip-debian-linux-kernel-firmware-issues-ethernet-drivers-missing/
>
> Basically add non-free to sources.list and then do:
> apt-get update
> apt-get install firmware-linux
>
> Kushal Koolwal
>
> I do blog at http://blogs.koolwal.net/
>
>
> _________________________________________________________________
> Get free photo software from Windows Live
> http://www.windowslive.com/online/photos?ocid=PID23393::T:WLMTAGL:ON:WL:en-US:SI_PH_software:082009
----------------------------------------------------------------
This message was sent using IMP, the Internet Messaging Program.
Try searching in lenny-backports if you are using Lenny.
Also is your network/wire-less card working fine in spite of those message?
I think my Fujitsu laptop uses the same hardware and I remember seeing those messages (regarding tg3) on my laptop but my wireless/Ethernet card worked just fine.
Kushal Koolwal
I do blog at http://blogs.koolwal.net/
_________________________________________________________________
Get free photo software from Windows Live
http://www.windowslive.com/online/photos?ocid=PID23393::T:WLMTAGL:ON:WL:en-US:SI_PH_software:082009
--
Szabolcs Toth
Quoting "Kushal Koolwal" <kushal...@hotmail.com>:
>
> Sorry to hear that it did not worked out for you.
>
> Try searching in lenny-backports if you are using Lenny.
>
> Also is your network/wire-less card working fine in spite of those message?
>
> I think my Fujitsu laptop uses the same hardware and I remember
> seeing those messages (regarding tg3) on my laptop but my
> wireless/Ethernet card worked just fine.
>
> Kushal Koolwal
>
> I do blog at http://blogs.koolwal.net/
>
> _________________________________________________________________
> Get free photo software from Windows Live
> http://www.windowslive.com/online/photos?ocid=PID23393::T:WLMTAGL:ON:WL:en-US:SI_PH_software:082009
----------------------------------------------------------------
This message was sent using IMP, the Internet Messaging Program.
The above are used only with older Tigon3 cards and even then most can
be used without them (only losing support for TSO).
However, they should be included in the firmware-linux-nonfree package,
and will be in future.
> W: Possible missing firmware /lib/firmware/ql8100_fw.bin for module qla2xxx
According to the change that added the reference to that file:
"Moving forward, all ISP81XX parts will
ship with a suggested-to-be-used firmware image within flash
which all driver should first attempt to load. If the flash
firmware load fails, the driver will then fallback to loading
firmware via the request-firmware interface (ql8100_fw.bin)."
So it appears that you will normally not need this file.
Ben.
--
Ben Hutchings
Unix is many things to many people,
but it's never been everything to anybody.