Bug#499624: linux-image-2.6.26-1-686: Sil3112 PCI SATA card : disks recognized in 2.6.25-2 but not in 2.6.26-1
laurent gobalraja
Version: 2.6.26-4
Severity: critical
Justification: causes serious data loss
Hi !
After latest upgrade, the kernel switched from 2.6.25-2 to 2.6.26-1. At reboot, 2 hard drives connected to the PCI Sil3112 SATA card
was not detected anymore. The module is correctly loaded but the devices are just not discovered.
If i boot back from the previous 2.6.25-686 kernel entry in grub, the disks are perfectly detected.
Please find below the previous 2.6.25-2-686 kern.log for debugging purpose and the automatically generated infos from the 2.6.26-686
kernel.
Feel free to ask any additionnal informations.
Thank you for consedering this issue.
<BEGIN 2.6.25-2-686>
......................
Sep 20 11:01:08 horizon kernel: [ 0.000000] Linux version 2.6.25-2-686 (Debian 2.6.25-7) (ma...@debian.org) (gcc version 4.1.3
20080623 (prerelease) (Debian 4.1.2-23)) #1 SMP Fri Jul 18 17:46:56 UTC 2008
......................
Sep 20 11:01:08 horizon kernel: [ 1.907713] SCSI subsystem initialized
......................
Sep 20 11:01:08 horizon kernel: [ 4.476004] sata_sil 0000:00:0d.0: version 2.3
Sep 20 11:01:08 horizon kernel: [ 4.476004] ACPI: PCI Interrupt 0000:00:0d.0[A] -> GSI 17 (level, low) -> IRQ 17
Sep 20 11:01:08 horizon kernel: [ 4.477178] scsi0 : sata_sil
Sep 20 11:01:08 horizon kernel: [ 4.481133] scsi1 : sata_sil
Sep 20 11:01:08 horizon kernel: [ 4.481277] ata1: SATA max UDMA/100 mmio m512@0xcfff7400 tf 0xcfff7480 irq 17
Sep 20 11:01:08 horizon kernel: [ 4.481346] ata2: SATA max UDMA/100 mmio m512@0xcfff7400 tf 0xcfff74c0 irq 17
Sep 20 11:01:08 horizon kernel: [ 4.793549] ata1: SATA link down (SStatus 0 SControl 310)
Sep 20 11:01:08 horizon kernel: [ 4.857395] firewire_core: created device fw0: GUID 00110600571a382d, S400
Sep 20 11:01:08 horizon kernel: [ 5.259306] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
Sep 20 11:01:08 horizon kernel: [ 5.267122] ata2.00: ATA-7: SAMSUNG HD103UJ, 1AA01112, max UDMA7
Sep 20 11:01:08 horizon kernel: [ 5.267122] ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
Sep 20 11:01:08 horizon kernel: [ 5.274383] ata2.00: configured for UDMA/100
Sep 20 11:01:08 horizon kernel: [ 5.274383] scsi 1:0:0:0: Direct-Access ATA SAMSUNG HD103UJ 1AA0 PQ: 0 ANSI: 5
Sep 20 11:01:08 horizon kernel: [ 5.274383] ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 20 (level, low) -> IRQ 20
Sep 20 11:01:08 horizon kernel: [ 5.274383] ohci_hcd 0000:00:03.0: OHCI Host Controller
Sep 20 11:01:08 horizon kernel: [ 5.274383] ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 2
Sep 20 11:01:08 horizon kernel: [ 5.274383] ohci_hcd 0000:00:03.0: irq 20, io mem 0xcfff9000
Sep 20 11:01:08 horizon kernel: [ 5.291034] Driver 'sd' needs updating - please use bus_type methods
Sep 20 11:01:08 horizon kernel: [ 5.292595] sd 1:0:0:0: [sda] 1953525168 512-byte hardware sectors (1000205 MB)
Sep 20 11:01:08 horizon kernel: [ 5.292704] sd 1:0:0:0: [sda] Write Protect is off
Sep 20 11:01:08 horizon kernel: [ 5.292768] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
Sep 20 11:01:08 horizon kernel: [ 5.292793] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or
FUA
Sep 20 11:01:08 horizon kernel: [ 5.292972] sd 1:0:0:0: [sda] 1953525168 512-byte hardware sectors (1000205 MB)
Sep 20 11:01:08 horizon kernel: [ 5.293065] sd 1:0:0:0: [sda] Write Protect is off
Sep 20 11:01:08 horizon kernel: [ 5.293128] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
Sep 20 11:01:08 horizon kernel: [ 5.293150] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or
FUA
Sep 20 11:01:08 horizon kernel: [ 5.293237] sda: sda1 sda2
Sep 20 11:01:08 horizon kernel: [ 5.307708] sd 1:0:0:0: [sda] Attached SCSI disk
Sep 20 11:01:08 horizon kernel: [ 5.331709] usb usb2: configuration #1 chosen from 1 choice
Sep 20 11:01:08 horizon kernel: [ 5.331709] hub 2-0:1.0: USB hub found
Sep 20 11:01:08 horizon kernel: [ 5.331709] hub 2-0:1.0: 3 ports detected
Sep 20 11:01:08 horizon kernel: [ 5.433325] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
Sep 20 11:01:08 horizon kernel: [ 5.433325] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Sep 20 11:01:08 horizon kernel: [ 5.433325] usb usb2: Product: OHCI Host Controller
Sep 20 11:01:08 horizon kernel: [ 5.433325] usb usb2: Manufacturer: Linux 2.6.25-2-686 ohci_hcd
Sep 20 11:01:08 horizon kernel: [ 5.433325] usb usb2: SerialNumber: 0000:00:03.0
Sep 20 11:01:08 horizon kernel: [ 5.433325] ACPI: PCI Interrupt 0000:00:03.1[B] -> GSI 21 (level, low) -> IRQ 21
Sep 20 11:01:08 horizon kernel: [ 5.433325] ohci_hcd 0000:00:03.1: OHCI Host Controller
Sep 20 11:01:08 horizon kernel: [ 5.433325] ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 3
Sep 20 11:01:08 horizon kernel: [ 5.433325] ohci_hcd 0000:00:03.1: irq 21, io mem 0xcfffa000
Sep 20 11:01:08 horizon kernel: [ 5.492005] usb usb3: configuration #1 chosen from 1 choice
Sep 20 11:01:08 horizon kernel: [ 5.492005] hub 3-0:1.0: USB hub found
Sep 20 11:01:08 horizon kernel: [ 5.492005] hub 3-0:1.0: 3 ports detected
Sep 20 11:01:08 horizon kernel: [ 5.595348] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
Sep 20 11:01:08 horizon kernel: [ 5.595348] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Sep 20 11:01:08 horizon kernel: [ 5.595348] usb usb3: Product: OHCI Host Controller
Sep 20 11:01:08 horizon kernel: [ 5.595348] usb usb3: Manufacturer: Linux 2.6.25-2-686 ohci_hcd
Sep 20 11:01:08 horizon kernel: [ 5.595348] usb usb3: SerialNumber: 0000:00:03.1
Sep 20 11:01:08 horizon kernel: [ 5.595348] ACPI: PCI Interrupt 0000:00:03.2[C] -> GSI 22 (level, low) -> IRQ 22
Sep 20 11:01:08 horizon kernel: [ 5.595348] ohci_hcd 0000:00:03.2: OHCI Host Controller
Sep 20 11:01:08 horizon kernel: [ 5.595348] ohci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 4
Sep 20 11:01:08 horizon kernel: [ 5.595348] ohci_hcd 0000:00:03.2: irq 22, io mem 0xcfffb000
Sep 20 11:01:08 horizon kernel: [ 5.650264] usb usb4: configuration #1 chosen from 1 choice
Sep 20 11:01:08 horizon kernel: [ 5.650264] hub 4-0:1.0: USB hub found
Sep 20 11:01:08 horizon kernel: [ 5.650264] hub 4-0:1.0: 2 ports detected
Sep 20 11:01:08 horizon kernel: [ 5.735624] usb 2-3: new full speed USB device using ohci_hcd and address 2
Sep 20 11:01:08 horizon kernel: [ 5.751520] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
Sep 20 11:01:08 horizon kernel: [ 5.751520] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Sep 20 11:01:08 horizon kernel: [ 5.751520] usb usb4: Product: OHCI Host Controller
Sep 20 11:01:08 horizon kernel: [ 5.751520] usb usb4: Manufacturer: Linux 2.6.25-2-686 ohci_hcd
Sep 20 11:01:08 horizon kernel: [ 5.751520] usb usb4: SerialNumber: 0000:00:03.2
Sep 20 11:01:08 horizon kernel: [ 5.751520] ACPI: PCI Interrupt 0000:00:0b.0[A] -> GSI 19 (level, low) -> IRQ 19
Sep 20 11:01:08 horizon kernel: [ 5.751520] ohci_hcd 0000:00:0b.0: OHCI Host Controller
Sep 20 11:01:08 horizon kernel: [ 5.751520] ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 5
Sep 20 11:01:08 horizon kernel: [ 5.751520] ohci_hcd 0000:00:0b.0: irq 19, io mem 0xcfff5000
Sep 20 11:01:08 horizon kernel: [ 5.832175] usb usb5: configuration #1 chosen from 1 choice
Sep 20 11:01:08 horizon kernel: [ 5.832260] hub 5-0:1.0: USB hub found
Sep 20 11:01:08 horizon kernel: [ 5.832331] hub 5-0:1.0: 3 ports detected
Sep 20 11:01:08 horizon kernel: [ 5.935530] usb 2-3: not running at top speed; connect to a high speed hub
Sep 20 11:01:08 horizon kernel: [ 5.938610] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
Sep 20 11:01:08 horizon kernel: [ 5.938677] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Sep 20 11:01:08 horizon kernel: [ 5.938759] usb usb5: Product: OHCI Host Controller
Sep 20 11:01:08 horizon kernel: [ 5.938822] usb usb5: Manufacturer: Linux 2.6.25-2-686 ohci_hcd
Sep 20 11:01:08 horizon kernel: [ 5.938887] usb usb5: SerialNumber: 0000:00:0b.0
Sep 20 11:01:08 horizon kernel: [ 5.938975] ACPI: PCI Interrupt 0000:00:0b.1[B] -> GSI 16 (level, low) -> IRQ 16
Sep 20 11:01:08 horizon kernel: [ 5.939103] ohci_hcd 0000:00:0b.1: OHCI Host Controller
Sep 20 11:01:08 horizon kernel: [ 5.939190] ohci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 6
Sep 20 11:01:08 horizon kernel: [ 5.939285] ohci_hcd 0000:00:0b.1: irq 16, io mem 0xcfff6000
Sep 20 11:01:08 horizon kernel: [ 5.955077] usb 2-3: configuration #1 chosen from 1 choice
Sep 20 11:01:08 horizon kernel: [ 5.957622] usb 2-3: New USB device found, idVendor=058f, idProduct=6362
Sep 20 11:01:08 horizon kernel: [ 5.957622] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Sep 20 11:01:08 horizon kernel: [ 5.957622] usb 2-3: Product: Mass Storage Device
Sep 20 11:01:08 horizon kernel: [ 5.957622] usb 2-3: Manufacturer: Generic
Sep 20 11:01:08 horizon kernel: [ 5.957622] usb 2-3: SerialNumber: 058F312D81B
Sep 20 11:01:08 horizon kernel: [ 6.022643] usb usb6: configuration #1 chosen from 1 choice
Sep 20 11:01:08 horizon kernel: [ 6.022730] hub 6-0:1.0: USB hub found
Sep 20 11:01:08 horizon kernel: [ 6.022800] hub 6-0:1.0: 2 ports detected
Sep 20 11:01:08 horizon kernel: [ 6.126192] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
Sep 20 11:01:08 horizon kernel: [ 6.126192] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Sep 20 11:01:08 horizon kernel: [ 6.126192] usb usb6: Product: OHCI Host Controller
Sep 20 11:01:08 horizon kernel: [ 6.126192] usb usb6: Manufacturer: Linux 2.6.25-2-686 ohci_hcd
Sep 20 11:01:08 horizon kernel: [ 6.126192] usb usb6: SerialNumber: 0000:00:0b.1
Sep 20 11:01:08 horizon kernel: [ 6.126192] sata_sis 0000:00:05.0: version 1.0
Sep 20 11:01:08 horizon kernel: [ 6.126192] ACPI: PCI Interrupt 0000:00:05.0[A] -> GSI 17 (level, low) -> IRQ 17
Sep 20 11:01:08 horizon kernel: [ 6.126192] sata_sis 0000:00:05.0: Detected SiS 180/181/964 chipset in SATA mode
Sep 20 11:01:08 horizon kernel: [ 6.126192] scsi2 : sata_sis
Sep 20 11:01:08 horizon kernel: [ 6.126192] scsi3 : sata_sis
Sep 20 11:01:08 horizon kernel: [ 6.126192] ata3: SATA max UDMA/133 cmd 0xd800 ctl 0xd400 bmdma 0xc800 irq 17
Sep 20 11:01:08 horizon kernel: [ 6.126192] ata4: SATA max UDMA/133 cmd 0xd000 ctl 0xcc00 bmdma 0xc808 irq 17
...................
Sep 20 11:01:08 horizon kernel: [ 6.500447] scsi4 : SCSI emulation for USB Mass Storage devices
...................
Sep 20 11:01:08 horizon kernel: [ 6.591838] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Sep 20 11:01:08 horizon kernel: [ 6.600209] ata3.00: ATA-7: Maxtor 6Y120M0, YAR51EW0, max UDMA/133
Sep 20 11:01:08 horizon kernel: [ 6.600283] ata3.00: 240121728 sectors, multi 16: LBA
Sep 20 11:01:08 horizon kernel: [ 6.619711] ata3.00: configured for UDMA/133
Sep 20 11:01:08 horizon kernel: [ 7.092140] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Sep 20 11:01:08 horizon kernel: [ 7.100243] ata4.00: ATA-7: SAMSUNG HD103UJ, 1AA01112, max UDMA7
Sep 20 11:01:08 horizon kernel: [ 7.100310] ata4.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
Sep 20 11:01:08 horizon kernel: [ 7.110918] ata4.00: configured for UDMA/133
Sep 20 11:01:08 horizon kernel: [ 7.110918] scsi 2:0:0:0: Direct-Access ATA Maxtor 6Y120M0 YAR5 PQ: 0 ANSI: 5
Sep 20 11:01:08 horizon kernel: [ 7.110918] sd 2:0:0:0: [sdb] 240121728 512-byte hardware sectors (122942 MB)
Sep 20 11:01:08 horizon kernel: [ 7.110918] sd 2:0:0:0: [sdb] Write Protect is off
Sep 20 11:01:08 horizon kernel: [ 7.110918] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
Sep 20 11:01:08 horizon kernel: [ 7.110918] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or
FUA
Sep 20 11:01:08 horizon kernel: [ 7.110918] sd 2:0:0:0: [sdb] 240121728 512-byte hardware sectors (122942 MB)
Sep 20 11:01:08 horizon kernel: [ 7.110918] sd 2:0:0:0: [sdb] Write Protect is off
Sep 20 11:01:08 horizon kernel: [ 7.110918] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
Sep 20 11:01:08 horizon kernel: [ 7.110918] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or
FUA
Sep 20 11:01:08 horizon kernel: [ 7.110918] sdb: sdb1
Sep 20 11:01:08 horizon kernel: [ 7.116746] sd 2:0:0:0: [sdb] Attached SCSI disk
Sep 20 11:01:08 horizon kernel: [ 7.116746] scsi 3:0:0:0: Direct-Access ATA SAMSUNG HD103UJ 1AA0 PQ: 0 ANSI: 5
Sep 20 11:01:08 horizon kernel: [ 7.116746] sd 3:0:0:0: [sdc] 1953525168 512-byte hardware sectors (1000205 MB)
Sep 20 11:01:08 horizon kernel: [ 7.116761] sd 3:0:0:0: [sdc] Write Protect is off
Sep 20 11:01:08 horizon kernel: [ 7.116825] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
Sep 20 11:01:08 horizon kernel: [ 7.116848] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or
FUA
Sep 20 11:01:08 horizon kernel: [ 7.116977] sd 3:0:0:0: [sdc] 1953525168 512-byte hardware sectors (1000205 MB)
Sep 20 11:01:08 horizon kernel: [ 7.117070] sd 3:0:0:0: [sdc] Write Protect is off
Sep 20 11:01:08 horizon kernel: [ 7.117134] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
Sep 20 11:01:08 horizon kernel: [ 7.117156] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or
FUA
Sep 20 11:01:08 horizon kernel: [ 7.117242] sdc: sdc1
Sep 20 11:01:08 horizon kernel: [ 7.135744] sd 3:0:0:0: [sdc] Attached SCSI disk
Sep 20 11:01:08 horizon kernel: [ 7.169268] hda: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2000kB Cache
Sep 20 11:01:08 horizon kernel: [ 7.169576] Uniform CD-ROM driver Revision: 3.20
Sep 20 11:01:08 horizon kernel: [ 7.187768] hdc: ATAPI 48X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache
Sep 20 11:01:08 horizon kernel: [ 14.017317] device-mapper: uevent: version 1.0.3
Sep 20 11:01:08 horizon kernel: [ 14.023803] device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-d...@redhat.com
Sep 20 11:01:08 horizon kernel: [ 14.293307] XFS mounting filesystem sda2
Sep 20 11:01:08 horizon kernel: [ 14.447769] Ending clean XFS mount for filesystem: sda2
Sep 20 11:01:08 horizon kernel: [ 14.484198] XFS mounting filesystem sdb1
Sep 20 11:01:08 horizon kernel: [ 14.573942] Ending clean XFS mount for filesystem: sdb1
Sep 20 11:01:08 horizon kernel: [ 14.598756] XFS mounting filesystem sdc1
Sep 20 11:01:08 horizon kernel: [ 14.752463] Ending clean XFS mount for filesystem: sdc1
...................
<END 2.6.25-2-686>
-- Package-specific info:
** Version:
Linux version 2.6.26-1-686 (Debian 2.6.26-4) (wa...@debian.org) (gcc version 4.1.3 20080623 (prerelease) (Debian 4.1.2-23)) #1 SMP Thu Aug 28 12:00:54 UTC 2008
** Command line:
root=/dev/sda1
** Tainted: P (1)
** Kernel log:
[ 5.576075] usb 3-1: New USB device found, idVendor=046d, idProduct=c049
[ 5.576152] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 5.576220] usb 3-1: Product: USB Gaming Mouse
[ 5.576283] usb 3-1: Manufacturer: Logitech
[ 5.675382] Initializing USB Mass Storage driver...
[ 5.675568] scsi2 : SCSI emulation for USB Mass Storage devices
[ 5.675732] usbcore: registered new interface driver usb-storage
[ 5.675799] USB Mass Storage support registered.
[ 5.679764] usb-storage: device found at 2
[ 5.679770] usb-storage: waiting for device to settle before scanning
[ 5.757461] usbcore: registered new interface driver hiddev
[ 5.762312] input: Logitech USB Gaming Mouse as /class/input/input1
[ 5.767746] input,hidraw0: USB HID v1.11 Mouse [Logitech USB Gaming Mouse] on usb-0000:00:03.2-1
[ 5.776034] ata1: SATA link down (SStatus 0 SControl 310)
[ 5.776868] hiddev96hidraw1: USB HID v1.11 Device [Logitech USB Gaming Mouse] on usb-0000:00:03.2-1
[ 5.777095] usbcore: registered new interface driver usbhid
[ 5.777161] usbhid: v2.6:USB HID core driver
[ 6.096032] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 6.104407] ata2.00: ATA-7: SAMSUNG HD103UJ, 1AA01112, max UDMA7
[ 6.104474] ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 6.112391] ata2.00: configured for UDMA/100
[ 6.112635] scsi 1:0:0:0: Direct-Access ATA SAMSUNG HD103UJ 1AA0 PQ: 0 ANSI: 5
[ 6.150522] hda: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2000kB Cache
[ 6.150834] Uniform CD-ROM driver Revision: 3.20
[ 6.156259] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00110600571a382d]
[ 6.171441] hdc: ATAPI 48X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache
[ 6.171916] Driver 'sd' needs updating - please use bus_type methods
[ 6.172197] sd 1:0:0:0: [sda] 1953525168 512-byte hardware sectors (1000205 MB)
[ 6.172298] sd 1:0:0:0: [sda] Write Protect is off
[ 6.172372] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 6.172400] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 6.172591] sd 1:0:0:0: [sda] 1953525168 512-byte hardware sectors (1000205 MB)
[ 6.175854] sd 1:0:0:0: [sda] Write Protect is off
[ 6.175919] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 6.175944] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 6.176052] sda: sda1 sda2
[ 6.181091] sd 1:0:0:0: [sda] Attached SCSI disk
[ 6.406315] SGI XFS with ACLs, security attributes, realtime, large block numbers, no debug enabled
[ 6.408311] SGI XFS Quota Management subsystem
[ 6.429714] XFS mounting filesystem sda1
[ 6.644783] Ending clean XFS mount for filesystem: sda1
[ 7.506912] udevd version 125 started
[ 8.786573] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 8.788796] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 8.818144] Linux agpgart interface v0.103
[ 8.823357] agpgart: Detected SiS chipset - id:1862
[ 8.827966] agpgart: AGP aperture is 64M @ 0xd0000000
[ 8.951413] input: Power Button (FF) as /class/input/input2
[ 8.984138] ACPI: Power Button (FF) [PWRF]
[ 8.984295] input: Power Button (CM) as /class/input/input3
[ 9.016118] ACPI: Power Button (CM) [PWRB]
[ 9.824372] gameport: EMU10K1 is pci0000:00:0a.1/gameport0, io 0xdc00, speed 1242kHz
[ 10.165640] input: PC Speaker as /class/input/input4
[ 10.293690] Error: Driver 'pcspkr' is already registered, aborting...
[ 10.307569] ACPI: PCI Interrupt 0000:00:0a.0[A] -> GSI 18 (level, low) -> IRQ 18
[ 10.475037] parport_pc 00:09: reported by Plug and Play ACPI
[ 10.475210] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP]
[ 10.597968] gameport: NS558 PnP Gameport is pnp00:0a/gameport0, io 0x200, speed 917kHz
[ 10.677658] usb-storage: device scan complete
[ 10.684656] scsi 2:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0
[ 10.691672] scsi 2:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0
[ 10.698629] scsi 2:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0
[ 10.705640] scsi 2:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0
[ 10.716744] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[ 10.727722] sd 2:0:0:1: [sdc] Attached SCSI removable disk
[ 10.738764] sd 2:0:0:2: [sdd] Attached SCSI removable disk
[ 10.749728] sd 2:0:0:3: [sde] Attached SCSI removable disk
[ 12.997351] fuse init (API version 7.9)
[ 13.144157] w83627hf: Found W83697HF chip at 0x290
[ 13.232023] device-mapper: uevent: version 1.0.3
[ 13.238606] device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-d...@redhat.com
[ 13.509561] XFS mounting filesystem sda2
[ 13.644012] Ending clean XFS mount for filesystem: sda2
[ 14.264675] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 14.503369] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 16.680850] eth0: Media Link On 100mbps full-duplex
[ 19.271258] NET: Registered protocol family 10
[ 19.271964] lo: Disabled Privacy Extensions
[ 19.714222] RPC: Registered udp transport module.
[ 19.714313] RPC: Registered tcp transport module.
[ 19.820096] Installing knfsd (copyright (C) 1996 ok...@monad.swb.de).
[ 27.260113] tun: Universal TUN/TAP device driver, 1.6
[ 27.260205] tun: (C) 1999-2004 Max Krasnyansky <ma...@qualcomm.com>
[ 27.262960] tun0: Disabled Privacy Extensions
[ 28.242001] lp0: using parport0 (interrupt-driven).
[ 28.272956] ppdev: user-space parallel port driver
[ 29.828009] eth0: no IPv6 routers present
[ 31.443621] NET: Registered protocol family 23
[ 31.460006] usbcore: registered new interface driver stir4200
[ 32.666127] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[ 32.666271] NFSD: starting 90-second grace period
[ 34.048362] warning: `pure-ftpd-virtu' uses 32-bit capabilities (legacy support in use)
[ 37.532011] cdrom: This disc doesn't have any tracks I recognize!
[ 243.430925] nvidia: module license 'NVIDIA' taints kernel.
[ 243.687429] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 243.688012] NVRM: loading NVIDIA UNIX x86 Kernel Module 173.14.09 Wed Jun 4 23:43:17 PDT 2008
[ 244.055710] agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
[ 244.055734] agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
[ 244.055738] agpgart: SiS delay workaround: giving bridge time to recover.
[ 244.068105] agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode
** Loaded modules:
Module Size Used by
nvidia 7086148 44
binfmt_misc 7528 1
stir4200 8548 0
irda 95480 1 stir4200
crc_ccitt 2080 1 irda
ppdev 6468 0
lp 8164 0
tun 8292 1
video 16400 0
output 2912 1 video
ac 4196 0
battery 10180 0
nfsd 186704 17
auth_rpcgss 33952 1 nfsd
exportfs 3904 1 nfsd
nfs 213896 0
lockd 54248 2 nfsd,nfs
nfs_acl 2912 2 nfsd,nfs
sunrpc 162176 13 nfsd,auth_rpcgss,nfs,lockd,nfs_acl
ipv6 235204 35
iptable_nat 4680 0
nf_nat 15576 1 iptable_nat
iptable_mangle 2688 0
nf_conntrack_ipv4 12268 4 iptable_nat,nf_nat
xt_state 2016 1
nf_conntrack 55508 4 iptable_nat,nf_nat,nf_conntrack_ipv4,xt_state
xt_tcpudp 2816 20
iptable_filter 2624 1
ip_tables 10160 3 iptable_nat,iptable_mangle,iptable_filter
x_tables 13284 4 iptable_nat,xt_state,xt_tcpudp,ip_tables
dm_snapshot 14340 0
dm_mirror 15104 0
dm_log 8452 1 dm_mirror
dm_mod 46184 3 dm_snapshot,dm_mirror,dm_log
w83627hf 20984 0
hwmon_vid 2720 1 w83627hf
eeprom 5232 0
i2c_core 19828 2 nvidia,eeprom
fuse 42908 1
psmouse 32336 0
ide_disk 10496 0
snd_emu10k1_synth 5664 0
snd_emux_synth 27936 1 snd_emu10k1_synth
ns558 3712 0
parport_pc 22500 1
parport 30988 3 ppdev,lp,parport_pc
snd_seq_virmidi 4896 1 snd_emux_synth
snd_seq_midi_emul 5376 1 snd_emux_synth
snd_emu10k1 115200 5 snd_emu10k1_synth
firmware_class 6816 1 snd_emu10k1
snd_ac97_codec 88484 1 snd_emu10k1
snd_pcm_oss 32800 0
snd_mixer_oss 12320 1 snd_pcm_oss
ac97_bus 1728 1 snd_ac97_codec
snd_util_mem 4032 2 snd_emux_synth,snd_emu10k1
snd_hwdep 6212 2 snd_emux_synth,snd_emu10k1
snd_seq_dummy 2660 0
pcspkr 2432 0
snd_pcm 62628 4 snd_emu10k1,snd_ac97_codec,snd_pcm_oss
snd_page_alloc 7816 2 snd_emu10k1,snd_pcm
snd_seq_oss 24992 0
snd_seq_midi 5728 0
snd_rawmidi 18560 3 snd_seq_virmidi,snd_emu10k1,snd_seq_midi
snd_seq_midi_event 6432 3 snd_seq_virmidi,snd_seq_oss,snd_seq_midi
emu10k1_gp 2688 0
gameport 10700 4 ns558,emu10k1_gp
snd_seq 41456 9 snd_emux_synth,snd_seq_virmidi,snd_seq_midi_emul,snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
snd_timer 17800 3 snd_emu10k1,snd_pcm,snd_seq
snd_seq_device 6380 8 snd_emu10k1_synth,snd_emux_synth,snd_emu10k1,snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
snd 45604 20 snd_emux_synth,snd_seq_virmidi,snd_emu10k1,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_hwdep,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
soundcore 6368 1 snd
button 6064 0
sis_agp 6752 1
agpgart 28776 2 nvidia,sis_agp
shpchp 25528 0
pci_hotplug 23460 1 shpchp
evdev 8000 3
xfs 458040 2
sd_mod 22200 3
ide_cd_mod 27652 0
cdrom 30176 1 ide_cd_mod
pata_sis 9796 0
usbhid 35904 0
hid 33184 1 usbhid
ff_memless 4392 1 usbhid
usb_storage 75936 0
ata_generic 4676 0
floppy 47716 0
sata_sil 7176 2
libata 140416 3 pata_sis,ata_generic,sata_sil
scsi_mod 129356 3 sd_mod,usb_storage,libata
dock 8272 1 libata
natsemi 23616 0
ehci_hcd 28428 0
ohci1394 24944 0
ieee1394 75800 1 ohci1394
sis900 17312 0
mii 4896 1 sis900
ohci_hcd 18500 0
usbcore 118160 6 stir4200,usbhid,usb_storage,ehci_hcd,ohci_hcd
sis5513 6788 0 [permanent]
ide_pci_generic 3908 0 [permanent]
ide_core 92628 4 ide_disk,ide_cd_mod,sis5513,ide_pci_generic
thermal 15228 0
processor 32576 1 thermal
fan 4164 0
thermal_sys 10856 4 video,thermal,processor,fan
** PCI devices:
00:00.0 Host bridge [0600]: Silicon Integrated Systems [SiS] 746 Host [1039:0746] (rev 10)
Subsystem: ASRock Incorporation Device [1849:0746]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at d0000000 (32-bit, non-prefetchable) [size=64M]
Capabilities: <access denied>
Kernel driver in use: agpgart-sis
Kernel modules: sis-agp
00:01.0 PCI bridge [0604]: Silicon Integrated Systems [SiS] SG86C202 [1039:0002]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32
Bus: primary=00, secondary=01, subordinate=02, sec-latency=32
Memory behind bridge: cbc00000-cfdfffff
Prefetchable memory behind bridge: ab900000-cbafffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Kernel modules: shpchp
00:02.0 ISA bridge [0601]: Silicon Integrated Systems [SiS] SiS964 [MuTIOL Media IO] [1039:0964] (rev 36)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:02.5 IDE interface [0101]: Silicon Integrated Systems [SiS] 5513 [IDE] [1039:5513] (rev 01) (prog-if 80 [Master])
Subsystem: ASRock Incorporation Device [1849:5513]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 128
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at ff00 [size=16]
Capabilities: <access denied>
Kernel driver in use: SIS_IDE
Kernel modules: pata_sis, sis5513
00:03.0 USB Controller [0c03]: Silicon Integrated Systems [SiS] USB 1.1 Controller [1039:7001] (rev 0f) (prog-if 10)
Subsystem: ASRock Incorporation Device [1849:7001]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (20000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 20
Region 0: Memory at cfff9000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
Kernel modules: ohci-hcd
00:03.1 USB Controller [0c03]: Silicon Integrated Systems [SiS] USB 1.1 Controller [1039:7001] (rev 0f) (prog-if 10)
Subsystem: ASRock Incorporation Device [1849:7001]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (20000ns max), Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 21
Region 0: Memory at cfffa000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
Kernel modules: ohci-hcd
00:03.2 USB Controller [0c03]: Silicon Integrated Systems [SiS] USB 1.1 Controller [1039:7001] (rev 0f) (prog-if 10)
Subsystem: ASRock Incorporation Device [1849:7001]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (20000ns max), Cache Line Size: 32 bytes
Interrupt: pin C routed to IRQ 22
Region 0: Memory at cfffb000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
Kernel modules: ohci-hcd
00:04.0 Ethernet controller [0200]: Silicon Integrated Systems [SiS] SiS900 PCI Fast Ethernet [1039:0900] (rev 90)
Subsystem: ASRock Incorporation Device [1849:8201]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (13000ns min, 2750ns max)
Interrupt: pin A routed to IRQ 19
Region 0: I/O ports at c000 [size=256]
Region 1: Memory at cfff8000 (32-bit, non-prefetchable) [size=4K]
Expansion ROM at 50000000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: sis900
Kernel modules: sis900
00:05.0 RAID bus controller [0104]: Silicon Integrated Systems [SiS] RAID bus controller 180 SATA/PATA [SiS] [1039:0180] (rev 01) (prog-if 85)
Subsystem: ASRock Incorporation Device [1849:0180]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 128
Interrupt: pin A routed to IRQ 12
Region 0: I/O ports at d800 [size=8]
Region 1: I/O ports at d400 [size=4]
Region 2: I/O ports at d000 [size=8]
Region 3: I/O ports at cc00 [size=4]
Region 4: I/O ports at c800 [size=16]
Region 5: I/O ports at c400 [size=128]
Capabilities: <access denied>
00:09.0 FireWire (IEEE 1394) [0c00]: VIA Technologies, Inc. IEEE 1394 Host Controller [1106:3044] (rev 46) (prog-if 10)
Subsystem: VIA Technologies, Inc. IEEE 1394 Host Controller [1106:3044]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (8000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at cfff7800 (32-bit, non-prefetchable) [size=2K]
Region 1: I/O ports at bc00 [size=128]
Capabilities: <access denied>
Kernel driver in use: ohci1394
Kernel modules: ohci1394
00:0a.0 Multimedia audio controller [0401]: Creative Labs SB Live! EMU10k1 [1102:0002] (rev 0a)
Subsystem: Creative Labs Device [1102:100a]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (500ns min, 5000ns max)
Interrupt: pin A routed to IRQ 18
Region 0: I/O ports at b800 [size=32]
Capabilities: <access denied>
Kernel driver in use: EMU10K1_Audigy
Kernel modules: snd-emu10k1
00:0a.1 Input device controller [0980]: Creative Labs SB Live! Game Port [1102:7002] (rev 0a)
Subsystem: Creative Labs Device [1102:0020]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32
Region 0: I/O ports at dc00 [size=8]
Capabilities: <access denied>
Kernel driver in use: Emu10k1_gameport
Kernel modules: emu10k1-gp
00:0b.0 USB Controller [0c03]: NEC Corporation USB [1033:0035] (rev 43) (prog-if 10)
Subsystem: Device [1631:0035]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (250ns min, 10500ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 19
Region 0: Memory at cfff5000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: ohci_hcd
Kernel modules: ohci-hcd
00:0b.1 USB Controller [0c03]: NEC Corporation USB [1033:0035] (rev 43) (prog-if 10)
Subsystem: Device [1631:0035]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (250ns min, 10500ns max), Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 16
Region 0: Memory at cfff6000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: ohci_hcd
Kernel modules: ohci-hcd
00:0b.2 USB Controller [0c03]: NEC Corporation USB 2.0 [1033:00e0] (rev 04) (prog-if 20)
Subsystem: Device [1631:1600]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (4000ns min, 8500ns max), Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 17
Region 0: Memory at cfff7700 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:0c.0 Ethernet controller [0200]: National Semiconductor Corporation DP83815 (MacPhyter) Ethernet Controller [100b:0020]
Subsystem: Netgear Device [1385:f311]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (2750ns min, 13000ns max)
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at b400 [size=256]
Region 1: Memory at cfff4000 (32-bit, non-prefetchable) [size=4K]
Expansion ROM at 50020000 [disabled] [size=64K]
Capabilities: <access denied>
Kernel driver in use: natsemi
Kernel modules: natsemi
00:0d.0 Mass storage controller [0180]: Silicon Image, Inc. SiI 3112 [SATALink/SATARaid] Serial ATA Controller [1095:3112] (rev 02)
Subsystem: Silicon Image, Inc. SiI 3112 [SATALink/SATARaid] Serial ATA Controller [1095:3112]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 17
Region 0: I/O ports at b000 [size=8]
Region 1: I/O ports at ac00 [size=4]
Region 2: I/O ports at a800 [size=8]
Region 3: I/O ports at a400 [size=4]
Region 4: I/O ports at a000 [size=16]
Region 5: Memory at cfff7400 (32-bit, non-prefetchable) [size=512]
Expansion ROM at cff00000 [disabled] [size=512K]
Capabilities: <access denied>
Kernel driver in use: sata_sil
Kernel modules: sata_sil
01:00.0 VGA compatible controller [0300]: nVidia Corporation NV43 [GeForce 6600 GT] [10de:00f1] (rev a2)
Subsystem: Giga-byte Technology Device [1458:3150]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 248 (1250ns min, 250ns max)
Interrupt: pin A routed to IRQ 16
Region 0: Memory at ce000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at b0000000 (32-bit, prefetchable) [size=256M]
Region 2: Memory at cd000000 (32-bit, non-prefetchable) [size=16M]
Expansion ROM at cfde0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: nvidia
Kernel modules: nvidiafb, nvidia
-- System Information:
Debian Release: lenny/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: i386 (i686)
Kernel: Linux 2.6.26-1-686 (SMP w/1 CPU core)
Locale: LANG=fr_FR@euro, LC_CTYPE=fr_FR@euro (charmap=ISO-8859-15)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-2.6.26-1-686 depends on:
ii debconf [debconf-2.0] 1.5.22 Debian configuration management sy
ii initramfs-tools [linux-initra 0.92j tools for generating an initramfs
ii module-init-tools 3.4-1 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.26-1-686 recommends:
ii libc6-i686 2.7-13 GNU C Library: Shared libraries [i
Versions of packages linux-image-2.6.26-1-686 suggests:
ii grub 0.97-47 GRand Unified Bootloader (Legacy v
pn linux-doc-2.6.26 <none> (no description available)
-- debconf-show failed
--
To UNSUBSCRIBE, email to debian-bugs...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listm...@lists.debian.org
Debian Bug Tracking System
Your message dated Mon, 22 Sep 2008 02:32:47 -0700 (PDT)
with message-id <480795....@web65408.mail.ac4.yahoo.com>
and subject line Re: Bug#499624: Acknowledgement (linux-image-2.6.26-1-686: Sil3112 PCI SATA card : disks recognized in 2.6.25-2 but not in 2.6.26-1)
has caused the Debian Bug report #499624,
regarding linux-image-2.6.26-1-686: Sil3112 PCI SATA card : disks recognized in 2.6.25-2 but not in 2.6.26-1
to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.
(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact ow...@bugs.debian.org
immediately.)
--
499624: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=499624
Debian Bug Tracking System
Contact ow...@bugs.debian.org with problems