Probably a vague question but do we have a tap and die set big enough to thread 1 1/4" steel pipe?
Alternatively, does anyone know of somewhere in Leeds that sells galv steel pipe cut to length and threaded?
It's purely decorative for a light I'm working on, but needs to be threaded to satisfy earthing requirements.
Cheers,
Matt
I think our biggest tap and die is about 15mm.
Something that big may be manageable on the lathe in time but we havent laser cut the cogs yet and I think it would need an oil pump for cutting steel.
--
You received this message because you are subscribed to the Google Groups "Leeds Hack Space" group.
To unsubscribe from this group and stop receiving emails from it, send an email to leeds-hack-spa...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
If the threading is entirely for earthing purposes, could you not earth it in a different way?
--
You received this message because you are subscribed to the Google Groups "Leeds Hack Space" group.
To unsubscribe from this group and stop receiving emails from it, send an email to leeds-hack-space+unsubscribe@googlegroups.com.
I thought about welding, but all the elbow joints I want to use come threaded. Grub screws are definitely not allowed. I kind of like the aesthetic of exposed thread too.
You can buy stock and die sets for up to 1 1/4" pipes but just for one project that seemed a little much.
I'm thinking of alternatives, I'm sure I found a website that will do cut to length and threaded a little while ago but can't find it now.
To unsubscribe from this group and stop receiving emails from it, send an email to leeds-hack-spa...@googlegroups.com.
I thought about welding, but all the elbow joints I want to use come threaded. Grub screws are definitely not allowed. I kind of like the aesthetic of exposed thread too.
You can buy stock and die sets for up to 1 1/4" pipes but just for one project that seemed a little much.
I'm thinking of alternatives, I'm sure I found a website that will do cut to length and threaded a little while ago but can't find it now.
On 15 Mar 2015 18:28, "Daniel F" <buildth...@gmail.com> wrote:
If the threading is entirely for earthing purposes, could you not earth it in a different way?
On 15 Mar 2015 15:15, "Jon Stockill" <li...@stockill.net> wrote:
On 14.03.2015 10:00, J C wrote:
I think our biggest tap and die is about 15mm.
Pipe threads are tapered - you can't cut them with a normal tap/die. You need an appropriate threading machine/tool.
Something that big may be manageable on the lathe in time but we
havent laser cut the cogs yet and I think it would need an oil pump
for cutting steel.
It *may* be possible to cut pipe threads on the lathe using a combination of the right change gears and a taper turning attachment (unfortunately we have neither) but pipe of the size you're after wouldn't fit through the headstock, so you'd also need a MUCH bigger lathe.
--
Jon Stockill
li...@stockill.net
--
You received this message because you are subscribed to the Google Groups "Leeds Hack Space" group.
To unsubscribe from this group and stop receiving emails from it, send an email to leeds-hack-spa...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
Thanks for the input, I'm coming to the conclusion that an inch will be fine and was also thinking about a local tradesman for cutting and threading it.
The earthing requirement was for safety as it's just structural but will have cabling for the lights wrapped around it so the threaded contact will provide sufficient continuity.
usually over an inch they use an electric pipe threader (that might be just for speed I'm not sure) a plumber, sprinkler installer or industrial electrician would be your best bet. welding will burn off any galv, you have to galv it after you weld it. some paint products react with galv. you can't rely on the earthing of the pipe as the earth for your wiring you need to put a designated earth wire in (if you didn't know this) if it's for earthing the product for safety that's different (I don't know what's required on earthing)
Tapping's not the problem as all the fittings come pre-threaded. I think my problem is that the volumes I want are so small fry that it isn't really a consideration for suppliers. All I need are a couple of elbows a couple of flanges and three lengths of pipe.
Sparks thread 25mm galv by hand all the time, it takes a bit of elbow grease (and cutting compound) but I've never seen it tapped onsite before, usually just use pre formed joints and bend it for corners or use junction boxes.