This poster unsuccessfully attempted a preliminary test during the August
14, 2009 lunar occultation of Pleaides. An image of the south pole was
taken, followed by an image of the Alcyone triple. Unfortunately, weather
conditions and an unanticipated glare problem unquie to the Mak imaging
scope prevented getting a useable result. The Meade ETX 125 Mak has a curved
corrector plate. When slewing from the south pole to Alcyone, the Mak's
curved surface diverted off-axis lunar glare into the tube and washed out
the image. No useable photometry information could be gleaned from the
image, but a demonstration information on image scale could be found.
------------------------------------------------------
EXCELLENT !!!
This too is part of the reason to test.. Off axis glare is THE problem with
grazes or this type of event.
Flocking the nosepiece of the camera works very well to help eliminate SOME
of this glare, especially when it is (2) inch and a quarter discs of
flocking material placed two different distances from the detector, each
having holes of appropriate sizes of the on axis focal plane, i.e. the hole
is larger in the disc farthest from the detector.
Any scope that allows access to the inside of the OTA should already be
flocked, since it is simple to do and can yield a large increase in
contrast. This was a huge improvement on my 12" LX200, gaining me around a
full magnitude with a PC164 depending on conditions.
KURT ALSO WROTE, and I am paraphrasing, numbers about the ejecta curtain
expressed in km.. These numbers are reason to smile, as I have been hoping
to hear anything 8km or more. If these predictions are accurate and/or the
ejecta curtain happens to be brighter and a distance of 8km or more happens,
this will be vastly easier than anything I have heard previously. Comparing
this (which I barely comprehend and have been looking for the previously
mentioned keywords) to a mag 7 star grazing the south pole is exactly why I
am here.. I can do that. I did a graze 7 hours after a full moon and this
should be easier, so I am all jazzed about this again..
YEAH!
Derek
PS.. I live in mag six skies in Morgan Hill, CA. Any imager who lives near
here is more than welcome to accompany me in my Front Yard..
-----------------------------------------------
I don't know exactly what I wrote, but I doubt I meant magnitude.. 8 to 10
km is in the range of 2 arcseconds..
2 arcseconds from small amounts of bright limb and a mag 7 or 8 star (point
source) is rather easily seen.
This is what I was thinking..
But you know what I did actually write, so I will assume you are correct. I
type with two fingers and it would NOT be the first time my fingers did
their own thing while I was thinking something else..
As for Pleiades on the bright limb, wont touch that one..
Derek
Much easier and faster to actually DO lunar occultations, since it will be
highly dependant on your personal equipment..
Glare, probably more accurately termed "field flooding", will always be the
primary issue. Assuming the weather is good.
I did just successfully record to video a mag 8.8 star (combined light from
a close double) on a 75% lit moon, at an altitude of 20 degrees, at a cusp
angle of 12 North. Being closer to the brightly lit cusp made this
exponentially more difficult the mag 9.3 star at 19N.
I'll try to create a decent video or still image and post it to my website
tomorrow. It will be very ugly to many, but data is a thing of beauty to
me.. Other than posting a link to the video, I'll be done interjecting on
this subject..
Derek
This graze should be fairly easy to see visually in a 10" scope, even though
the prediction is for a 6"..
Since you are using Occult, generate the actual graze details, and read off
the visibility table provided..
First Off.. This is a double star, so this is a combined magnitude of 6.9...
387 is double:
AB 7.7 7.7 0.10" 90.0 () Graze path of B 0.08 km north, and 0.2 secs
later compared to A
And here are a couple of the visibility tables.. You will note that a 2/10s
of a degree change is Cusp Angle provides a 0.3 mag gain in the Limiting
Mag.. Your Posted prediction was for a CA of 2.7N..
At longitude -111.75:
Limiting Magnitudes for various telescope apertures (in cm)
CA\Tdia 5 10 15 20 25 30 35
-1.4 2.8 4.2 5.0 5.5 5.8 6.1 6.2
0.6 2.8 4.2 5.0 5.5 5.8 6.1 6.2
2.6 4.0 5.5 6.3 6.8 7.1 7.4 7.6
4.6 4.8 6.2 7.0 7.6 7.9 8.2 8.4
6.6 5.0 6.4 7.2 7.7 8.1 8.4 8.6
At longitude -112.25:
Limiting Magnitudes for various telescope apertures (in cm)
CA\Tdia 5 10 15 20 25 30 35
-1.2 2.8 4.2 5.0 5.5 5.8 6.1 6.3
0.8 2.8 4.2 5.0 5.5 5.8 6.1 6.3
2.8 4.3 5.8 6.6 7.1 7.4 7.7 7.9
4.8 4.8 6.2 7.0 7.6 7.9 8.2 8.4
6.8 5.1 6.5 7.3 7.8 8.2 8.5 8.7
This change is extremely important and I have talked about it repeatedly.
You have to have separation from a brightly lit feature to have any chance.
It is plain as day in the tables above. They are not perfect tables, as some
scopes have less glare and some detectors are better than others.. This also
matches what I did last night when I videotaped the disappearance of a mag
9.3 star at a cusp angle of 12 with a 30cm. 1/60s exposures, Time inserted
with a KIWI OSD, and graphed out with LiMovie. Timing +/- 0.008s. Report
sent (to me)..
Distance from a lit feature is everything.
This is why, when the LCROSS Principals end up with two possible impact
sites, heavy weighting in the decision making process needs to be given to
the site furthest from any lit feature..
From an amateur point of view, it should be the entire point after the
technical needs of the mission.
Derek
PS.. As IOTA's Lunar Occultation Coordinator, I would point out that any
timings of that star you mention is much sought after, especially since it
is double. We have a new goal of determining separations and PA's of Double
Stars. As an OCCULT User, I am sure you know this. I mention it for others
following along.
Mag 5.3 on the bright limb?? I wouldn't even try it, but then again I would
not try any occultation visually since I aim to accurately time them. Any
CCD detector, whether a Sony style interlaced video chip, or an SBIG style
"real" CCD has to fight irradiation of the bright limb, which makes the
apparent bright limb extend out from it's nominal position. So you may see
the star on the bright limb disappear on camera, but it reality it can be a
sizeable distance from the limb. Usually it just melds into the brightness
and never disappears. Different on thin crescents and fat gibbous Moons
too..
Test, Test, and more tests by occultation..
300X Visually on a 10"?? I am using a 12" f/10 SCT @ 1920mm focal length
with a Watec 1/2" chip video camera and see almost 1/4 of the full lunar
disc..
***For the predicted impact time, only Faustini is on the dark limb side;
the other targets are few cusp degrees on the bright limb side.***
If not Faustini, then the ejecta needs to move a decent distance away (in
arc seconds).
Derek
PS.. Does this list allow attachments??
Thanks, Derek.
Being a novice at occultations, I was not aware of the secondary report
built into Occult 4. Thanks for pointing it out.
>>> In Occult, the right click is your friend. I am a beta tester, so
anything you need assistance with, feel free to email me directly. Anytime..
If I am answering a question, I am less likely to be irritating some email
group..
We need to talk anyway so I can add you into the observer database, if you
are not there already..
Since Schaefer's article in S&T mentions he has preparing his program with
respect to the IOTA, perhaps it is incorporated into Occult 4?
>>> Probably and I have inquired about this already..
I'll see what I can do recording the event including trying to work up some
interest at my local club. I do not have KIWI OSD being a novice, but use
an audio recording of the shortwave time signal.
>>> That works just fine for a graze or a total occultation, but for us to
work on the PA and Sep of double stars, a video recording is a must (with
WWV or CHU on the audio track for timing).
And by "US" I mean those guys over there.. I am but an enthusiast data
gatherer..
Derek
While duplicating your graze prediction with the current as yet unreleased
next version, I generated an error.. I just got this back as part of a
conversation on the error..
-------------------
On a related issue......... In this case ZC387 is listed as a double star.
However there is no
entry in either the WDS or the Interferometric catalogues for this star. It
is flagged because
it was included in David D's dsFile several decades ago. DavidD will be
reviewing such stars
over the next month...
Dave Herald
Canberra, Australia
-------------------
So, you may decide it isn't really worth trying.. Or you could be like me
and set three alarms and a messaging service so as to not miss this event so
you could find out.. Possibly something in between?? :-))
Certainly still a good visibility test as a single star of course..
Is your scope mobile and do you want to be in the actual graze zone?? I can
do that via direct emails..
Derek
PS.. Forgive us Group (OK me) for this little chat session!
Would you like me to do this as an occultation off the graze path to check
for a double or would you like a graze to map the limb?
>>>>> BOTH.. Grazes tend to extend the time between possible events, making
double stars more obvious..
I already have the Google Earth graze map run off. (Click twice to pass the
Google error message.)
http://members.csolutions.net/fisherka/astronote/observed/LCROSS/ZC387_2009_
Sep__9.htm
>>>>>This is a very good try, but I am betting it is incorrect by a decent
amount because it was done for the proper elevation. That's just a guess.
I'll make you an elevation adjusted map.. And provide a profile for you..
The graze path runs through a remote basin and range valley 60 kilometers
west of Salt Lake called Skull Valley and near a local prominent feature -
Skull Valley Rock. There is a convenient dirt road that runs perpendicular
to the graze path.
>>>>>> Please open either your map or preferably one of mine...
Any GoogleMap link on this page.. http://www.poyntsource.com/New/Global.htm
Zoom into the place you mention above.. The dirt road.. Zoom in as much as
possible, and put the cursor on that road and double left click.. Cut and
paste the line of text that appears under the map, namely the coordinates,
into an email to me and include the next item as well..
Zoom back out to a reasonable level and click the button on the map at the
top right that says TOPO and, zooming in an out as needed, ascertain the
elevation of this site, which shown in feet.. Send that too..
Please..
My commitment is for myself only, but an officer of my local club is also a
member on this newsgroup, so I will see if there is any interest in my local
club in running a multiple scope graze line.
>>>>> Two observers.. OK..
A reminder email around Sept. 6 would be welcomed.
>>>>> Wow.. Should I fly to Utah and observe it for you too?? .. Man..
That's good humor there..
I believe I have an observer in that area I could send you.. I will find
out.. It would be REAL good to put a video observer between two visual
observers..
Derek
--------------------------------
FYI- The OCCULT Helpfile and the actual HTML of those maps, specifically
warn potential editors of the coding to let me know first before editing
them. They are very temperamental..
I mention this since you like to do programming, and at some point you will
want to enter in a newly acquired Google Key..
Derek
PS.. Corrected Sentence...
I am betting it is incorrect by a decent amount because it *WASN'T* done for
the proper elevation. That's just a guess. I'll make you an elevation
adjusted map.. And provide a profile for you..
I have a spell checker. I do not have an Idiot Typer checker..
http://www.poyntsource.com/New/Regions/Wiggins.htm
Derek
> That's just a guess. I'll make you an elevation adjusted map..
Thanks, Derek. With one done the right way I can work on it in Occult v4
till I can match the result. Please send it on. - Clear Skies Kurt
----------------------------------------------------------------------------
----------
There is no need to match this result.. This will still not be "correct"
unless I got lucky..
( I can show you how to do this anytime.. )
All the data...
http://www.poyntsource.com/New/Requested_Profiles.htm
The GoogleMap..
http://www.poyntsource.com/New/Google.htm
Right hand column - Salt Lake City..
Open the map and change the +15.0 box to 1500 and press the button.. This
moves one offset line out of the way..
Set the other line to +1.0.. Press the button..
The Green line is altitude adjusted for 1306 meters. The Grey line is the
line to observe from.. Find where it intersects that spot your were telling
me about before.. The Perpendicular dirt road in Skull Valley.. Put the
cursor on the intersection of the line and road and double left click and
send me the coordinates that appear under the map.. (Scroll Down).. Also the
elevation at that spot using the TOPO button..
I do have an observer less than 20 km from there in case you want to
converse with him in person..
ALSO.. It finally dawned on me.. This is a graze thru my front yard, the
second one in the year I have lived here..
Derek
Magnitude table
The magnitude visibility table gives the faintest magnitude that will be
visible at that cusp angle with different telescope apertures, assuming good
observing conditions. An example of the table is:
At longitude 40.00:
Limiting Magnitudes for various telescope apertures (in cm)
CA\Tdia 5 10 15 20 25 30 35
1.7 2.8 4.1 4.9 5.3 5.5 5.7 5.8
3.7 4.5 5.9 6.7 7.1 7.4 7.6 7.8
5.7 4.7 6.1 6.8 7.3 7.6 7.8 7.9
7.7 5.4 6.8 7.5 8.0 8.3 8.5 8.7
9.7 5.4 6.8 7.5 8.0 8.3 8.5 8.7
The first line gives the longitude along the graze path used for the
generation of the table. You can generate the table for any location along
the path and this can be important to allow for changes in cusp angle, or
star altitude.
The third line of the table provides column headers. CA is the Cusp Angle of
the star. Tdia refers to Telescope diameter (in cm) which, in the 7 columns
of the body of the table cover telescope apertures from 5cm to 35 cm.
The 5 lines of the body of the table correspond to the cusp angle of the
star. The third line is set as the Cusp Angle of the graze at the selected
longitude [or at the mid-point of the listed graze path in the prediction.]
The preceding and following lines can be used in conjunction with the graze
profile to indicate visibility of the star during the course of the graze.
The organiser of a graze expedition can use this table to:
Indicate the minimum telescope aperture required to observe the graze
(Either the whole graze. Or just one half of a graze that is close to the
cusp); and
Allocate sites to observers, in a way that maximises the number of
successful timings made during the graze.
Assume for this example that the star was of magnitude 5.0. This table
indicates that the part of the graze that occurs furthest from the cusp will
be visible in almost any telescope. However, when the star is close to the
cusp, it will be more difficult to observe and might require a 20cm (8")
telescope. The organiser might locate observers with medium-size telescopes
closest to the graze limit confident that they will see all events because
the star will always be some distance from the cusp. They might locate
observers with large telescopes further in from the graze path, in the
knowledge that they will be able to record the whole graze because with
their telescope they will be able to see the star when it is close to the
cusp. They might also locate observers with small telescopes in a similar
region to the large telescopes in the expectation that they will not see the
star while it is near the cusp, but will have no difficulty with the part of
the graze where the star is a long way from the cusp (when would in fact be
easier to see than if the observer was located closer to the graze path.)
[The expression used by OCCULT is that of Schaefer, B. E., Bulder, H. J. J.,
and Bourgeois, J., Lunar occultation visibility, Icarus , 100, 60-72 (1992)
]