                                                                                                                                                                                                                                                                
Received-SPF: neutral (google.com: 91.220.196.211 is neither permitted nor denied by best guess record for domain of ste...@nortd.com) client-ip=91.220.196.211;
Message-ID: <50955CB0.1090107@nortd.com>
Date: Sat, 03 Nov 2012 19:04:32 +0100
From: Stefan Hechenberger <ste...@nortd.com>
User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:16.0) Gecko/20121028 Thunderbird/16.0.2
MIME-Version: 1.0
To: lasersaur@googlegroups.com
Subject: Re: [lasersaur] Re: Lasersaur build update
References: <503ABFF1.60707@nortd.com> <CAC1otcwSERd4LHUqCuEgh+PSqCahayQBKpVyirDaT_2RFxfJGQ@mail.gmail.com> <2264B61F8C2A45DC95773B87629E9CD5@davidPC> <50492E8A.5030...@gmail.com> <CAOXWAmXENDbT9fdJUOUeAm9A4yyyOKGNXP7EoRbMfyWkT7+...@mail.gmail.com> <504C66EE.4000...@nortd.com> <CAOXWAmUvo0DvHrtOTr_dh2XOGE2wCLQTBMmhP442VDK0zJN...@mail.gmail.com> <50507E65.5020...@nortd.com> <508D18C4.8020...@allartburns.org> <A7D4DC70-C780-4D0A-A4D4-0B5F959BC...@gmail.com> <35939715-220D-44D6-A544-FD672EEFE...@gmail.com>
In-Reply-To: <35939715-220D-44D6-A544-FD672EEFE...@gmail.com>
Content-Type: text/plain; charset=windows-1252; format=flowed
Content-Transfer-Encoding: 8bit


congrats! looking good.

Did you see the manual page about alignment? It's normal to take a bit 
of time but should not be terribly hard. It usually takes me about 20min 
the first time.

http://labs.nortd.com/lasersaur/manual/optics_setup

Thanks for the video,

--
Stefan Hechenberger
studio: Nortd Labs - labs.nortd.com
resident: F.A.T. Lab - fffff.at
project: Lasersaur - labs.nortd.com/lasersaur

On 11/03/2012 06:09 PM, Erik Moon wrote:
> Hi All-
>
> Ok -- our Lasersaur is now cutting!!
>
> Videos of our first cut:
>
> replicatemypart.com <http://replicatemypart.com>
>
>
> We were able to cut 1/4" MDF and 4 mm Acrylic sheet on our first day. It
> is looking pretty good.
>
> I can't tell you how frustrating laser alignment was to complete� I
> think there is a serious need for some documentation on the best
> procedure for doing that. We stumbled onto a good solution, but I'm
> pretty sure we did not take the easy way to getting that done.
>
> -Erik & Jason