I am a newbie to the group but have been using JT65HF for some time. I nowhave a strange problem.
Setup is a Flex3000 Sdr radio and use VIrtual Audio Cable to get the audio to and from the Flex. The system has been working fine up until now.
The symptoms are that there is no audio displayed on the waterfall. I have checked the audio settings and all is ok. I thought it might be the VAC settings but i can decode and tx ok using DM780 and ROS software so the Flex and VAC are working ok.
Also if i adjust the audio output level on the Flex i can see the level meter change on the JT65 software but i dont seen the signals on the screen!
The JT65HF is the latest version. I have tried re-installing but no change.
On Sun, Sep 9, 2012 at 1:02 PM, G0MGM <lionfi...@gmail.com> wrote:
> Hello
> I am a newbie to the group but have been using JT65HF for some time. I
> nowhave a strange problem.
> Setup is a Flex3000 Sdr radio and use VIrtual Audio Cable to get the audio
> to and from the Flex. The system has been working fine up until now.
> The symptoms are that there is no audio displayed on the waterfall. I have
> checked the audio settings and all is ok. I thought it might be the VAC
> settings but i can decode and tx ok using DM780 and ROS software so the
> Flex and VAC are working ok.
> Also if i adjust the audio output level on the Flex i can see the level
> meter change on the JT65 software but i dont seen the signals on the screen!
> The JT65HF is the latest version. I have tried re-installing but no change.
> Any ideas?
> Rob
> G0MGM
> --
> You received this message because you are subscribed to the Google Groups
> "JT65-HF" group.
> To view this discussion on the web visit
> https://groups.google.com/d/msg/jt65-hf/-/bCNgE6Eo4uAJ.
> To post to this group, send email to jt65-hf@googlegroups.com.
> To unsubscribe from this group, send email to
> jt65-hf+unsubscribe@googlegroups.com.
> For more options, visit this group at
> http://groups.google.com/group/jt65-hf?hl=en.
Check your setup in JT-65, sometime the audio settings get changed within
the program,
I also use a flex 300 and VAC, VAC is great- the downfall can be since it is
software based the physical port numbers can get swapped around.
Most likely you will find the audio input /outputs have changes in JT65 and
no longer correct.
Rick
KD8LCD
From: jt65-hf@googlegroups.com [mailto:jt65-hf@googlegroups.com] On Behalf
Of Rick Johnson
Sent: Sunday, September 09, 2012 1:57 PM
To: jt65-hf@googlegroups.com
Subject: Re: [jt65-hf] No audio or decode on any band
Maybe something changed your com port??
73,
Rick W3BI
On Sun, Sep 9, 2012 at 1:02 PM, G0MGM <lionfi...@gmail.com> wrote:
Hello
I am a newbie to the group but have been using JT65HF for some time. I
nowhave a strange problem.
Setup is a Flex3000 Sdr radio and use VIrtual Audio Cable to get the audio
to and from the Flex. The system has been working fine up until now.
The symptoms are that there is no audio displayed on the waterfall. I have
checked the audio settings and all is ok. I thought it might be the VAC
settings but i can decode and tx ok using DM780 and ROS software so the Flex
and VAC are working ok.
Also if i adjust the audio output level on the Flex i can see the level
meter change on the JT65 software but i dont seen the signals on the screen!
The JT65HF is the latest version. I have tried re-installing but no change.
Any ideas?
Rob
G0MGM
--
You received this message because you are subscribed to the Google Groups
"JT65-HF" group.
To view this discussion on the web visit
https://groups.google.com/d/msg/jt65-hf/-/bCNgE6Eo4uAJ.
To post to this group, send email to jt65-hf@googlegroups.com.
To unsubscribe from this group, send email to
jt65-hf+unsubscribe@googlegroups.com
<mailto:jt65-hf%2Bunsubscribe@googlegroups.com> .
For more options, visit this group at
http://groups.google.com/group/jt65-hf?hl=en.
-- You received this message because you are subscribed to the Google Groups
"JT65-HF" group.
To post to this group, send email to jt65-hf@googlegroups.com.
To unsubscribe from this group, send email to
jt65-hf+unsubscribe@googlegroups.com.
For more options, visit this group at
http://groups.google.com/group/jt65-hf?hl=en.
__________ Information from ESET NOD32 Antivirus, version of virus signature
database 7460 (20120909) __________
>" Also if i adjust the audio output level on the Flex i can see the level
meter change on the JT65 software but i dont seen the signals on the
screen!"
On the level meter. Right Channel? Left Channel? Both Channels? Are the
brightness and contrast controls at good levels? With smooth checked, do
you have a uniform blue color across the waterfall?
-----Original Message-----
From: jt65-hf@googlegroups.com [mailto:jt65-hf@googlegroups.com] On Behalf
Of G0MGM
Sent: Sunday, September 09, 2012 12:02 PM
To: jt65-hf@googlegroups.com
Subject: [jt65-hf] No audio or decode on any band
Hello
I am a newbie to the group but have been using JT65HF for some time. I
nowhave a strange problem.
Setup is a Flex3000 Sdr radio and use VIrtual Audio Cable to get the audio
to and from the Flex. The system has been working fine up until now.
The symptoms are that there is no audio displayed on the waterfall. I have
checked the audio settings and all is ok. I thought it might be the VAC
settings but i can decode and tx ok using DM780 and ROS software so the Flex
and VAC are working ok.
Also if i adjust the audio output level on the Flex i can see the level
meter change on the JT65 software but i dont seen the signals on the screen!
The JT65HF is the latest version. I have tried re-installing but no change.
> Check your setup in JT-65, sometime the audio settings get changed within the program,
> I also use a flex 300 and VAC, VAC is great- the downfall can be since it is software based the physical port numbers can get swapped around.
> Most likely you will find the audio input /outputs have changes in JT65 and no longer correct.
> Rick
> KD8LCD
> From: jt65-hf@googlegroups.com [mailto:jt65-hf@googlegroups.com] On Behalf Of Rick Johnson
> Sent: Sunday, September 09, 2012 1:57 PM
> To: jt65-hf@googlegroups.com
> Subject: Re: [jt65-hf] No audio or decode on any band
> Maybe something changed your com port??
> 73,
> Rick W3BI
> On Sun, Sep 9, 2012 at 1:02 PM, G0MGM <lionfi...@gmail.com> wrote:
> Hello
> I am a newbie to the group but have been using JT65HF for some time. I nowhave a strange problem.
> Setup is a Flex3000 Sdr radio and use VIrtual Audio Cable to get the audio to and from the Flex. The system has been working fine up until now.
> The symptoms are that there is no audio displayed on the waterfall. I have checked the audio settings and all is ok. I thought it might be the VAC settings but i can decode and tx ok using DM780 and ROS software so the Flex and VAC are working ok.
> Also if i adjust the audio output level on the Flex i can see the level meter change on the JT65 software but i dont seen the signals on the screen!
> The JT65HF is the latest version. I have tried re-installing but no change.
> Any ideas?
> Rob
> G0MGM
> --
> You received this message because you are subscribed to the Google Groups "JT65-HF" group.
> To view this discussion on the web visit https://groups.google.com/d/msg/jt65-hf/-/bCNgE6Eo4uAJ.
> To post to this group, send email to jt65-hf@googlegroups.com.
> To unsubscribe from this group, send email to jt65-hf+unsubscribe@googlegroups.com.
> For more options, visit this group at http://groups.google.com/group/jt65-hf?hl=en.
> -- > You received this message because you are subscribed to the Google Groups "JT65-HF" group.
> To post to this group, send email to jt65-hf@googlegroups.com.
> To unsubscribe from this group, send email to jt65-hf+unsubscribe@googlegroups.com.
> For more options, visit this group at http://groups.google.com/group/jt65-hf?hl=en.
> __________ Information from ESET NOD32 Antivirus, version of virus signature database 7460 (20120909) __________
> The message was checked by ESET NOD32 Antivirus.
> >” Also if i adjust the audio output level on the Flex i can see the level meter change on the JT65 software but i dont seen the signals on the screen!”
> On the level meter… Right Channel? Left Channel? Both Channels? Are the brightness and contrast controls at good levels? With smooth checked, do you have a uniform blue color across the waterfall?
> 73 de WY5R - KD
> JT65A Power Calculator
> -----Original Message-----
> From: jt65-hf@googlegroups.com [mailto:jt65-hf@googlegroups.com] On Behalf Of G0MGM
> Sent: Sunday, September 09, 2012 12:02 PM
> To: jt65-hf@googlegroups.com
> Subject: [jt65-hf] No audio or decode on any band
> Hello
> I am a newbie to the group but have been using JT65HF for some time. I nowhave a strange problem.
> Setup is a Flex3000 Sdr radio and use VIrtual Audio Cable to get the audio to and from the Flex. The system has been working fine up until now.
> The symptoms are that there is no audio displayed on the waterfall. I have checked the audio settings and all is ok. I thought it might be the VAC settings but i can decode and tx ok using DM780 and ROS software so the Flex and VAC are working ok.
> Also if i adjust the audio output level on the Flex i can see the level meter change on the JT65 software but i dont seen the signals on the screen!
> The JT65HF is the latest version. I have tried re-installing but no change.
> Any ideas?
> Rob
> G0MGM
> -- > You received this message because you are subscribed to the Google Groups "JT65-HF" group.
> To post to this group, send email to jt65-hf@googlegroups.com.
> To unsubscribe from this group, send email to jt65-hf+unsubscribe@googlegroups.com.
> For more options, visit this group at http://groups.google.com/group/jt65-hf?hl=en.
From: jt65-hf@googlegroups.com [mailto:jt65-hf@googlegroups.com] On Behalf
Of Rob Dunne
Sent: Sunday, September 09, 2012 1:26 PM
To: jt65-hf@googlegroups.com
Cc: <jt65-hf@googlegroups.com>
Subject: Re: [jt65-hf] No audio or decode on any band
The level changes on the left channel which is normally the active one.
I have not changed the contrast levels, but i have black all across the
screen.
Ok i now feel so silly! Now that you got my to recheck the audio level meters i saw i had accidentally clicked on the right audio port. Clicked on the left and it all came back.
Thanks for your help.
Rob
G0MGM
Sent from my iPad
On 9 Sep 2012, at 19:28, "K. D. Sarchet" <w...@swbell.net> wrote:
> What is the audio level, and have you attempted to change from left channel to right?
> 73 de WY5R - KD
> JT65A Power Calculator
> From: jt65-hf@googlegroups.com [mailto:jt65-hf@googlegroups.com] On Behalf Of Rob Dunne
> Sent: Sunday, September 09, 2012 1:26 PM
> To: jt65-hf@googlegroups.com
> Cc: <jt65-hf@googlegroups.com>
> Subject: Re: [jt65-hf] No audio or decode on any band
> The level changes on the left channel which is normally the active one.
> I have not changed the contrast levels, but i have black all across the screen.
> Sent from my iPad
> -- > You received this message because you are subscribed to the Google Groups "JT65-HF" group.
> To post to this group, send email to jt65-hf@googlegroups.com.
> To unsubscribe from this group, send email to jt65-hf+unsubscribe@googlegroups.com.
> For more options, visit this group at http://groups.google.com/group/jt65-hf?hl=en.
On Sun, Sep 9, 2012 at 2:25 PM, Rob Dunne <lionfi...@gmail.com> wrote:
> The level changes on the left channel which is normally the active one.
> I have not changed the contrast levels, but i have black all across the
> screen.
> Sent from my iPad
> On 9 Sep 2012, at 19:17, "K. D. Sarchet" <w...@swbell.net> wrote:
> Rob,****
> ** **
> >” Also if i adjust the audio output level on the Flex i can see the level
> meter change on the JT65 software but i dont seen the signals on the
> screen!”****
> ** **
> On the level meter… Right Channel? Left Channel? Both Channels? Are
> the brightness and contrast controls at good levels? With smooth checked,
> do you have a uniform blue color across the waterfall?****
> -----Original Message-----
> From: jt65-hf@googlegroups.com [mailto:jt65-hf@googlegroups.com] On
> Behalf Of G0MGM
> Sent: Sunday, September 09, 2012 12:02 PM
> To: jt65-hf@googlegroups.com
> Subject: [jt65-hf] No audio or decode on any band****
> ** **
> Hello****
> ** **
> I am a newbie to the group but have been using JT65HF for some time. I
> nowhave a strange problem.****
> ** **
> Setup is a Flex3000 Sdr radio and use VIrtual Audio Cable to get the audio
> to and from the Flex. The system has been working fine up until now. ****
> ** **
> The symptoms are that there is no audio displayed on the waterfall. I have
> checked the audio settings and all is ok. I thought it might be the VAC
> settings but i can decode and tx ok using DM780 and ROS software so the
> Flex and VAC are working ok. ****
> ** **
> Also if i adjust the audio output level on the Flex i can see the level
> meter change on the JT65 software but i dont seen the signals on the screen!
> ****
> ** **
> The JT65HF is the latest version. I have tried re-installing but no
> change. ****
> ** **
> Any ideas?****
> ** **
> Rob****
> G0MGM****
> --
> You received this message because you are subscribed to the Google Groups
> "JT65-HF" group.
> To post to this group, send email to jt65-hf@googlegroups.com.
> To unsubscribe from this group, send email to
> jt65-hf+unsubscribe@googlegroups.com.
> For more options, visit this group at
> http://groups.google.com/group/jt65-hf?hl=en.
> --
> You received this message because you are subscribed to the Google Groups
> "JT65-HF" group.
> To post to this group, send email to jt65-hf@googlegroups.com.
> To unsubscribe from this group, send email to
> jt65-hf+unsubscribe@googlegroups.com.
> For more options, visit this group at
> http://groups.google.com/group/jt65-hf?hl=en.
> On Sun, Sep 9, 2012 at 2:25 PM, Rob Dunne <lionfi...@gmail.com> wrote:
> The level changes on the left channel which is normally the active one.
> I have not changed the contrast levels, but i have black all across the screen.
> Sent from my iPad
> On 9 Sep 2012, at 19:17, "K. D. Sarchet" <w...@swbell.net> wrote:
>> Rob,
>> >” Also if i adjust the audio output level on the Flex i can see the level meter change on the JT65 software but i dont seen the signals on the screen!”
>> On the level meter… Right Channel? Left Channel? Both Channels? Are the brightness and contrast controls at good levels? With smooth checked, do you have a uniform blue color across the waterfall?
>> 73 de WY5R - KD
>> JT65A Power Calculator
>> -----Original Message-----
>> From: jt65-hf@googlegroups.com [mailto:jt65-hf@googlegroups.com] On Behalf Of G0MGM
>> Sent: Sunday, September 09, 2012 12:02 PM
>> To: jt65-hf@googlegroups.com
>> Subject: [jt65-hf] No audio or decode on any band
>> Hello
>> I am a newbie to the group but have been using JT65HF for some time. I nowhave a strange problem.
>> Setup is a Flex3000 Sdr radio and use VIrtual Audio Cable to get the audio to and from the Flex. The system has been working fine up until now.
>> The symptoms are that there is no audio displayed on the waterfall. I have checked the audio settings and all is ok. I thought it might be the VAC settings but i can decode and tx ok using DM780 and ROS software so the Flex and VAC are working ok.
>> Also if i adjust the audio output level on the Flex i can see the level meter change on the JT65 software but i dont seen the signals on the screen!
>> The JT65HF is the latest version. I have tried re-installing but no change.
>> Any ideas?
>> Rob
>> G0MGM
>> -- >> You received this message because you are subscribed to the Google Groups "JT65-HF" group.
>> To post to this group, send email to jt65-hf@googlegroups.com.
>> To unsubscribe from this group, send email to jt65-hf+unsubscribe@googlegroups.com.
>> For more options, visit this group at http://groups.google.com/group/jt65-hf?hl=en.
> -- > You received this message because you are subscribed to the Google Groups "JT65-HF" group.
> To post to this group, send email to jt65-hf@googlegroups.com.
> To unsubscribe from this group, send email to jt65-hf+unsubscribe@googlegroups.com.
> For more options, visit this group at http://groups.google.com/group/jt65-hf?hl=en.
> -- > You received this message because you are subscribed to the Google Groups "JT65-HF" group.
> To post to this group, send email to jt65-hf@googlegroups.com.
> To unsubscribe from this group, send email to jt65-hf+unsubscribe@googlegroups.com.
> For more options, visit this group at http://groups.google.com/group/jt65-hf?hl=en.
> What was the fix....for the benefit of the list....
> 73,
> Rick W3BI
> On Sun, Sep 9, 2012 at 2:53 PM, Rob Dunne <lionfi...@gmail.com> wrote:
> Thanks everyone for your quick replies with help. Its all working again.
> Sent from my iPad
> On 9 Sep 2012, at 19:46, Rick Johnson <w3bi.r...@gmail.com> wrote:
> -- > You received this message because you are subscribed to the Google Groups "JT65-HF" group.
> To post to this group, send email to jt65-hf@googlegroups.com.
> To unsubscribe from this group, send email to jt65-hf+unsubscribe@googlegroups.com.
> For more options, visit this group at http://groups.google.com/group/jt65-hf?hl=en.
