Head Request supported in Eucalyptus ?

[Pawan Aravapalli]

Hi James ,


           Jets3t API  implemented functionalities (i.e add third-party Bucket  which means bucket sharing ), does have support for open-source Eucalyptus too?.  and s3Service.isBucketAccessible("bucket"); method is supported for Eucalyptus (open source 2.0.3) or not ?

 please help me. Thanks in Advance.

[Neil Soman]

Hi there,

First, 2.0.3 is really really old. I recommend upgrading to at least 3.2.2. There have been a lot of architecture and API enhancements.

Bucket HEAD support has been added to 3.3. You can grab the dev branch here:

https://github.com/eucalyptus/eucalyptus

Good luck!

neil

--
You received this message because you are subscribed to the Google Groups "JetS3t Users" group.
To unsubscribe from this group and stop receiving emails from it, send an email to jets3t-users...@googlegroups.com.
To post to this group, send email to jets3t...@googlegroups.com.
Visit this group at http://groups.google.com/group/jets3t-users?hl=en.
For more options, visit https://groups.google.com/groups/opt_out.
 
 

[James Murty]

The extent to which JetS3t's API calls intended for S3 work with Eucalyptus will depend largely on Eucalyptus.

I'm not familiar enough with Eucalyptus to be able to answer these questions, you're probably best off just trying them or asking on a Eucalyptus forum.

---
jamesmurty.com

--