Jason 35 Sailboats

Contact owners and managers

1–30 of 47

Welcome to the Jason 35 Sailboats google group.

This is a discussion forum for people who own Jason 35s or those thinking of acquiring one.

The Jason 35 was designed by Ted Brewer in the early 1970s. There were about 30 of them built on hulls fabricated of fiberglass by Miller Marine Construction of Bainbridge Island, WA. Most of these boats are outfitted and rigged as offshore cutters, and some of them have seen many miles at sea.

0 selected

Alan, Jerry Hanson3

8/30/21

Jerry & Joy: certainly was a pleasure bumping into you in Blind Bay. Droemen is a beautiful

unread,

Jerry & Joy: certainly was a pleasure bumping into you in Blind Bay. Droemen is a beautiful

8/30/21

8/30/21

Resealing Jason 35 Bronze Port lites

My boat, Norwegian Steam, also had a leaky portlight problem. I found a good solution for this

unread,

Resealing Jason 35 Bronze Port lites

My boat, Norwegian Steam, also had a leaky portlight problem. I found a good solution for this

8/30/21

Waldemar "Mark" Duszyk

10/23/20

picture of MAGGIE just before launching

unread,

picture of MAGGIE just before launching

10/23/20

Waldemar "Mark" Duszyk

10/23/20

MAGGIE is back in her element after two years and four months restoration.

unread,

MAGGIE is back in her element after two years and four months restoration.

10/23/20

Frosty Morning, … woy...@dryrose.com5

10/9/20

Good info on the Pelagic autopilots. Thank you! The builder of our Jason had set up for both a tiller

unread,

Good info on the Pelagic autopilots. Thank you! The builder of our Jason had set up for both a tiller

10/9/20

Jim Neuman, shag mills2

9/18/19

La Paz, BCS this summer.. did AK trip years ago. Remember hard copy charts, LORAN C! Great memories.

unread,

La Paz, BCS this summer.. did AK trip years ago. Remember hard copy charts, LORAN C! Great memories.

9/18/19

Alan, shag mills2

8/2/19

Square Stern Jason

Maybe you could snap a few pictures , with permission, to share with the group. Mike La Paz, BCS On

unread,

Square Stern Jason

Maybe you could snap a few pictures , with permission, to share with the group. Mike La Paz, BCS On

8/2/19

All About Spray, shag mills2

8/2/19

Building a hard dodger

Looks great . Await the solution for the sheet leads. Where are On Thu, Aug 1, 2019, 8:58 AM All

unread,

Building a hard dodger

Looks great . Await the solution for the sheet leads. Where are On Thu, Aug 1, 2019, 8:58 AM All

8/2/19

Jonathan Woytek, … Alan4

2/19/19

Boarding ladder

Thanks for the thoughts so far. I've contacted Scanmar to ask them some questions. Pinniped doesn

unread,

Boarding ladder

Thanks for the thoughts so far. I've contacted Scanmar to ask them some questions. Pinniped doesn

2/19/19

Jim Neuman, shag mills4

1/1/19

Thanks for the information. No continuity between top and bottom shaft! Wonder if by design or if

unread,

Thanks for the information. No continuity between top and bottom shaft! Wonder if by design or if

1/1/19

Melatar, shag mills5

12/12/18

Melatar is now looking for her third owner. I have enjoyed her since 2003 when I purchased her on Orcas Island, WA

will do On Wed, Dec 12, 2018 at 11:08 AM shag mills <bnb.n...@gmail.com> wrote: Site opened

unread,

Melatar is now looking for her third owner. I have enjoyed her since 2003 when I purchased her on Orcas Island, WA

will do On Wed, Dec 12, 2018 at 11:08 AM shag mills <bnb.n...@gmail.com> wrote: Site opened

12/12/18

Jonathan Woytek, Jerry Hanson2

12/8/18

New caretakers of S/V Pinniped, Erie, PA

Congratulations. It is good old boat! Sent from my iPhone On Dec 7, 2018, at 10:31 PM, Jonathan

unread,

New caretakers of S/V Pinniped, Erie, PA

Congratulations. It is good old boat! Sent from my iPhone On Dec 7, 2018, at 10:31 PM, Jonathan

12/8/18

Jim Neuman, Waldemar Mark Duszyk4

11/22/18

Made by Buchan in Seattle. On Tuesday, November 20, 2018 at 10:16:46 AM UTC-8, Jim Neuman wrote:

unread,

Made by Buchan in Seattle. On Tuesday, November 20, 2018 at 10:16:46 AM UTC-8, Jim Neuman wrote:

11/22/18

Jonathan Woytek, … Alan12

10/7/18

Thanks all! Jim, I'm holding off posting the boat name or photos until everything is final. I

unread,

Thanks all! Jim, I'm holding off posting the boat name or photos until everything is final. I

10/7/18

Alan, orego...@gmail.com3

9/25/18

You might find a 17" prop a very tight fit. I installed a 16" three blade Max-prop on the

unread,

You might find a 17" prop a very tight fit. I installed a 16" three blade Max-prop on the

9/25/18

Bill Roberts, bnb.n.lapaz5

9/23/18

Pilot house brochure

Nope, probably not. On Sun, Sep 23, 2018 at 5:26 PM bnb.n.lapaz <bnb.n...@gmail.com> wrote:

unread,

Pilot house brochure

Nope, probably not. On Sun, Sep 23, 2018 at 5:26 PM bnb.n.lapaz <bnb.n...@gmail.com> wrote:

9/23/18

Bill Roberts, Waldemar Mark Duszyk2

9/21/18

Pilot house Jason brochure

Please post it On Thu, Sep 20, 2018, 23:23 Bill Roberts <selkieon...@gmail.com> wrote: I

unread,

Pilot house Jason brochure

Please post it On Thu, Sep 20, 2018, 23:23 Bill Roberts <selkieon...@gmail.com> wrote: I

9/21/18

Waldemar "Mark" Duszyk, … RON SLEMKO16

8/7/18

Jason35 info and drawings

Our pilothouse Jason is hull number MMR35047A585 . From: "Ted Brewer" To: jason-35-

unread,

Jason35 info and drawings

Our pilothouse Jason is hull number MMR35047A585 . From: "Ted Brewer" To: jason-35-

8/7/18

Kayleen VanderRee

7/24/18

I've started a blog, documenting my projects and journey!

Hi all, I purchased Aislyn, now renamed Spray, in February. I've recently started documenting my

unread,

I've started a blog, documenting my projects and journey!

Hi all, I purchased Aislyn, now renamed Spray, in February. I've recently started documenting my

7/24/18

Ben Hayes, Ted Brewer2

7/5/18

looks like a project jason?

Good Morning All The vessel resembles my JASON design, exceot for being described as having a transom

unread,

looks like a project jason?

Good Morning All The vessel resembles my JASON design, exceot for being described as having a transom

7/5/18

Kayleen VanderRee, … Alan9

6/8/18

Windvane - Monitor

Hi Alan, Thanks for info! It seems fitting to name steering systems, doesn't it? After all they

unread,

Windvane - Monitor

Hi Alan, Thanks for info! It seems fitting to name steering systems, doesn't it? After all they

6/8/18

11/9/17

Seascape is for sale

Seascape is for sale on Ebay right now. See the listing for item 263295804678. The auction runs till

unread,

Seascape is for sale

Seascape is for sale on Ebay right now. See the listing for item 263295804678. The auction runs till

11/9/17

Joe Waldram, … Alan8

11/6/17

If it is like mine, someone has to chisel away the fairing compound, which is probably polyester, in

unread,

If it is like mine, someone has to chisel away the fairing compound, which is probably polyester, in

11/6/17

Bill Roberts, Alan6

11/6/17

Sail plan for Jason 35

On Friday, October 27, 2017 at 8:51:15 AM UTC-7, Bill Roberts wrote: Hi, I am looking for a copy of

unread,

Sail plan for Jason 35

On Friday, October 27, 2017 at 8:51:15 AM UTC-7, Bill Roberts wrote: Hi, I am looking for a copy of

11/6/17

David Matt, … Alan8

11/6/17

Mainsheet configuration

Hi David, I'll tell you what I did on Norwegian Steam. I like a traveler. Going to windward, when

unread,

Mainsheet configuration

Hi David, I'll tell you what I did on Norwegian Steam. I like a traveler. Going to windward, when

11/6/17

11/6/17

RE: [Jason-35-Group] Re: Jason 35 for sale

Hello all , I've decided to put my boat up for sale located in North Saanich, British Columbia.

unread,

RE: [Jason-35-Group] Re: Jason 35 for sale

Hello all , I've decided to put my boat up for sale located in North Saanich, British Columbia.

11/6/17

David Matt, … David Dierdorff5

4/26/17

How many gallons of bottom paint?

unread,

How many gallons of bottom paint?

4/26/17

David Matt, Alan2

1/8/17

Jordan series drogue

I think that a Jordan Series Drogue is an excellent choice. On Norwegian Steam, I have a 124 cone

unread,

Jordan series drogue

I think that a Jordan Series Drogue is an excellent choice. On Norwegian Steam, I have a 124 cone

1/8/17

David Matt, … Jerry Hanson8

1/7/17

Anchor chain locker

Thanks, Jerry and Joy. I'm glad to hear Dromen is up to the offshore seas. If all goes well with

unread,

Anchor chain locker

Thanks, Jerry and Joy. I'm glad to hear Dromen is up to the offshore seas. If all goes well with

1/7/17

David Matt, … Alan6

12/29/16

Thanks Alan. I'll give them a call too. Dave Matt SV "Seascape"

unread,

Thanks Alan. I'll give them a call too. Dave Matt SV "Seascape"

12/29/16

Search

Clear search

Close search

Google apps

Main menu