Google Groups no longer supports new Usenet posts or subscriptions. Historical content remains viewable.
Dismiss

px engine error -15 primodvd bravo sonic

9 views
Skip to first unread message

davidw...@yahoo.com

unread,
May 8, 2008, 5:51:20 PM5/8/08
to
This is just an FYI, no response necessary and I'll not check back,
but posting in hopes that someone will find this and be helped by it
since I couldn't easily find info when tried to get help on this
error.

We have a Bravo Pro disc duplication system with PrimoDVD burn
software and one day everything stopped working (or so it seemed) and
whenever we tried to burn we got: "Px engine error -15" for which I
could find no help online and the tech support at Primera (even though
the guy didn't figure it out, the support was really great and I
recommend buying from them as we did) didn't even know what it was.

We took an NTFS drive with .ISO files on it from our old XP Pro
Windows system (call it PC1) used for disc duplication and put it in
the newer XP Pro Windows system ((PC2) we are using for our new Bravo
Pro duplication system. Up until that point, we were burning
from .ISO files copied from that system to an external drive, but once
all was well I wanted to use internal drives from PC1 in PC2. So for
a month everything was great. Then I finally put the PC1 internal
drives into PC2 and everything seemed to work fine as well burning
from the .ISO files on the newly placed internal drives in PC2 for a
day or two. Then nothing worked, and we got the Px engine error -15.

It just so happens that the first 4 different .ISO files we burned
from the recently moved internal drive were not considered corrupt by
Windows XP on PC2. It just so happens that the next 3 totally
different .ISO files we tried to burn were considered corrupt by PC2!
So we were mislead for hours falsely assuming that everything was
working, and now nothing was, when in fact, those first 4 ISO files
still worked just fine.

So one interpretation of Px engine error -15 is you are using ISO
files is: "your ISO files are not valid". Sure enough, I was able to
open and edit the first 4 ISO files with MagicISO but was unable to
open the next 3 with MagicISO -- even though when this internal drive
was on PC1 these .ISO files worked just fine. I hope someone gets
helped by this!

0 new messages