setting modem speedUp-9800u

[Richi Hariyanto]

hallo,
mau tanya nih, saya coba konfigurasikan modem speedUp 9800u di
slackware 13.1. saya telah mengikuti cara dari blog pak Aghe Milano
[http://edwa94.blogspot.com/]
# lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching
Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching
Hub
Bus 002 Device 006: ID 1c9e:9800
Bus 002 Device 003: ID 1c4f:0003 SiGma Micro HID controller
Bus 002 Device 004: ID 04f2:b044 Chicony Electronics Co., Ltd Acer
CrystalEye Webcam

truz saya dmesg
#dmesg
...
sd 14:0:0:0: Attached scsi generic sg2 type 0
sr1: scsi-1 drive
sr 13:0:0:0: Attached scsi CD-ROM sr1
sr 13:0:0:0: Attached scsi generic sg3 type 5
sd 14:0:0:0: [sdb] Attached SCSI removable disk
sr 13:0:0:0: [sr1] Unhandled sense code
sr 13:0:0:0: [sr1] Result: hostbyte=0x00 driverbyte=0x08
sr 13:0:0:0: [sr1] Sense Key : 0x3 [current]
..

saya eject juga device tersebut,
# eject /dev/sr1
# eject /dev/sdb

lalu saya muat modulnya :
# /sbin/modprobe usbserial vendor=0x1c9e product=0x9800

# wvdialconf
Editing `/etc/wvdial.conf'.

Scanning your serial ports for a modem.

Modem Port Scan<*1>: S0 S1 S2 S3
WvModem<*1>: Cannot get information for serial port.
ttyUSB0<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
ttyUSB0<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 9600 baud
ttyUSB0<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up.
WvModem<*1>: Cannot get information for serial port.
ttyUSB1<*1>: ATQ0 V1 E1 -- OK
ttyUSB1<*1>: ATQ0 V1 E1 Z -- OK
ttyUSB1<*1>: ATQ0 V1 E1 S0=0 -- OK
ttyUSB1<*1>: ATQ0 V1 E1 S0=0 &C1 -- OK
ttyUSB1<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 -- OK
ttyUSB1<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK
ttyUSB1<*1>: Modem Identifier: ATI -- Manufacturer: Manufacturer
ttyUSB1<*1>: Speed 9600: AT -- OK
ttyUSB1<*1>: Max speed is 9600; that should be safe.
ttyUSB1<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK
WvModem<*1>: Cannot get information for serial port.
ttyUSB2<*1>: ATQ0 V1 E1 -- OK
ttyUSB2<*1>: ATQ0 V1 E1 Z -- OK
ttyUSB2<*1>: ATQ0 V1 E1 S0=0 -- OK
ttyUSB2<*1>: ATQ0 V1 E1 S0=0 &C1 -- OK
ttyUSB2<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 -- OK
ttyUSB2<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK
ttyUSB2<*1>: Modem Identifier: ATI -- Manufacturer: Manufacturer
ttyUSB2<*1>: Speed 9600: AT -- OK
ttyUSB2<*1>: Max speed is 9600; that should be safe.
ttyUSB2<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK

Found a modem on /dev/ttyUSB1.
Modem configuration written to /etc/wvdial.conf.
ttyUSB1<Info>: Speed 9600; init "ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0"
ttyUSB2<Info>: Speed 9600; init "ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0"


coba wvdial
# wvdial
--> WvDial: Internet dialer version 1.61
--> Cannot get information for serial port.
--> Initializing modem.
--> Sending: ATZ
ATZ
OK
--> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
OK
--> Modem initialized.
--> Sending: ATDT*99#
--> Waiting for carrier.
ATDT*99#
CONNECT 3600000
--> Carrier detected. Waiting for prompt.
--> Connected, but carrier signal lost! Retrying...
--> Sending: ATDT*99#
--> Waiting for carrier.
--> Timed out while dialing. Trying again.
--> Sending: ATDT*99#
--> Waiting for carrier.
--> Timed out while dialing. Trying again.
--> Sending: ATDT*99#
--> Waiting for carrier.
--> Timed out while dialing. Trying again.
--> Sending: ATDT*99#
--> Waiting for carrier.
--> Timed out while dialing. Trying again.
--> Sending: ATDT*99#
--> Waiting for carrier.
--> Timed out while dialing. Trying again.
--> Sending: ATDT*99#
--> Waiting for carrier.
--> Timed out while dialing. Trying again.
--> Sending: ATDT*99#
--> Waiting for carrier.
--> Timed out while dialing. Trying again.
--> Sending: ATDT*99#
--> Waiting for carrier.
--> Timed out while dialing. Trying again.
^CCaught signal 2: Attempting to exit gracefully...
--> Disconnecting at Fri Apr 29 11:50:54 2011

udah dicoba dari tadi pagi, masih buntu nih, hehe, :D, mohon
pencerahannya..

[Wendi Andriansyah]

Apa configurasinya modem di wvdial.conf sudah diganti /dev/USB1

--
=============================ID-SLACKWARE=============================
Alamat pengiriman pesan : id-sla...@googlegroups.com
Untuk Keluar: kirimkan email ke id-slackware...@googlegroups.com
Web Milis : http://groups.google.com/group/id-slackware
Chat room : ##id-slackware (irc.freenode.net)
=============================ID-SLACKWARE=============================

[Wendi Andriansyah]

maksudnya /dev/ttyUSB1

[aghe milano]

> -> Waiting for carrier.
wvdial.conf nya tambahin opsi
Carrier Check = 0
Stupid Mode = 1
sudah belom?

--
Best Regard,
Aghe Milano
====================================
Tempat curhat : http://edwa94.blogspot.com/
obrolan basi di YM : edwa94
tempat nongkrong asik di FB : edwa94_d!_yahoo_d0t_com

[Richi Hariyanto]

> /dev/ttyUSB1

udah kalo yang itu pak

> wvdial.conf nya tambahin opsi
> Carrier Check = 0
> Stupid Mode = 1
> sudah belom?

baru sudah dicoba, berhasil mendapatkan koneksi ke provider.. tapi
nemu masalah baru, saya coba ping ke google berhasil.. tapi ketika
mencoba browsing pake firefox kok nggak meloading ya?

[Richi Hariyanto]

oke, berhasil.. saya lupa menambahkan APN-nya pada wvdial.conf..
makasih buat pak Aghe Milano + pak
Wendi Andriansyah.. sekaran saya udah bisa berselancar.. :D

[aghe milano]

> sekaran saya udah bisa berselancar.. :D

siiip.. ya udah langsung aja download iso slacky 13.37 he..he..

[Broe Speed]

ditunggu dokumentasi lengkapnya nih.. :)

[Richi Hariyanto]

> siiip.. ya udah langsung aja download iso slacky 13.37 he..he..

hehe, rencananya pagi ini, tapi download dari warnet aja.. udah
kongkalikong ama teman yang rumahnya dekat warnet.. :D

> ditunggu dokumentasi lengkapnya nih..  :)

udah mas, disini http://richigo.wordpress.com/2011/04/28/konfigurasi-modem-speedup-9800u/
:)