***The Waste ink absorber is full. Contact the service center for the
replacement of the waste ink absorber***
poslao sam na hr.misc.binaries sliku problema
pod subjectom: Problem Pixma IP2000!
pa ako ima tko kakav savjet iz iskustva da pomogne! hvala unaprijed
A koliko si kazeta potrošio?
--
Pozdrav
adriatic
http://adriatix.hr/
"dado_bj" <Dad...@hotmail.com> wrote in message
news:d13sn8$rb2$2...@fegnews.vip.hr...
1: Remove the Cartridge
2: Unplug the AC Power Cord
3: Close Front access panel
3: Hold down the RESUME/RESET button and plug in the AC power cord
4: Release RESUME/RESET after plugging in the AC Power cord.
5: Press the RESUME/RESET once within 5 seconds and release the RESUME/RESET
.
6: Press and HOLD RESUME/RESET for two seconds or more and release it.
7: Press and HOLD RESUME/RESET for two seconds or more and release it.
8: Unplug AC Power Cord to set data.
"dado_bj" <Dad...@hotmail.com> wrote in message
news:d13sn8$rb2$2...@fegnews.vip.hr...
"dado_bj" <Dad...@hotmail.com> wrote in message
news:d13sn8$rb2$2...@fegnews.vip.hr...
>>>
LEXMARK 3000
Self test
1. Power off
2. Hold Paper feed button
3. Power on
4. Release Button when page feeds
5. To kill test-Unplug or turn off power
Error Codes
1. 8 Power light flashes>>-Replace printer<<<
2. 7 Power light flashes-Replace printer
3. 1 Power light flash-Replace printer
4. 4 Power light flashes-Replace printer
5. 10 Power light flashes-Replace printer
--
Pozdrav
adriatic
http://adriatix.hr/
"DiS" <podsj...@dis.hr> wrote in message
news:d14rd7$n8h$1...@ls219.htnet.hr...
nisam pročitao cijele upute ali ovo je do bola
"DiS" <podsj...@dis.hr> wrote in message
news:d14rd7$n8h$1...@ls219.htnet.hr...