You do not have permission to delete messages in this group
Copy link
Report message
Show original message
Either email addresses are anonymous for this group or you need the view member email addresses permission to view the original message
to hbrob...@googlegroups.com
A while back I said I was making a set of pylons to act as visual (or
other) markers for anyone who would like to use them for the Floorbot
Challenge. I now have them done.
The height of the plyon is 36 inches. The bases are nominally 11 inches
in diameter and 3 inches high. The pipe is 2 inch ABS which has a
nominal outside diameter of 2.375 inches.
Since these colors are relatively transparent, they need to be applied
over a white base coat to show up reasonably. I used Rust-Oleum�s
Painter�s Touch Ultra Cover 2x White Primer (249058).
http://rustoleum.com/CBGProduct.asp?pid=402
A hint to the machine vision noobs. While you could use these pictures
to quickly check out your vision system, your camera probably will not
see the colors the same as my camera did. Also, depending on the color
space you're using, ambient lighting can have a dramatic effect. RGB is
notorious for being affected this way.
Tim
anfed...@comcast.net
unread,
Jun 20, 2012, 7:02:51 PM6/20/12
Reply to author
Sign in to reply to author
Forward
Sign in to forward
Delete
You do not have permission to delete messages in this group
Copy link
Report message
Show original message
Either email addresses are anonymous for this group or you need the view member email addresses permission to view the original message
to hbrob...@googlegroups.com
I see that Tim is no adherent to feng shui.
From: "Tim Craig" <TimC...@Druai.com> To: hbrob...@googlegroups.com Sent: Wednesday, June 20, 2012 11:52:10 AM Subject: [HBRobotics] Floorbot Challenge Pylons
A while back I said I was making a set of pylons to act as visual (or other) markers for anyone who would like to use them for the Floorbot Challenge. I now have them done.
The height of the plyon is 36 inches. The bases are nominally 11 inches in diameter and 3 inches high. The pipe is 2 inch ABS which has a nominal outside diameter of 2.375 inches.
A hint to the machine vision noobs. While you could use these pictures to quickly check out your vision system, your camera probably will not see the colors the same as my camera did. Also, depending on the color space you're using, ambient lighting can have a dramatic effect. RGB is notorious for being affected this way.