Wades Extruder Parts - hackerspace_brisbane

The old Google Groups will be going away soon, but your browser is incompatible with the new version.

« Groups Home

hackerspace_brisbane

Home

Discussions

+ new post

About this group

Join this group

Message from discussion Wades Extruder Parts

Pamela Hauff

View profile

More options Sep 23 2012, 5:13 am

From: Pamela Hauff <hauff.geor...@gmail.com>

Date: Sun, 23 Sep 2012 19:13:33 +1000

Local: Sun, Sep 23 2012 5:13 am

Subject: Re: Wades Extruder Parts

Print | View thread | Show original | Report this message | Find messages by this author

Hi Chris,

So you think that the spring washers can apply the required force.
That would save the hassle using compression springs.

Great idea...

Thanks

On Sun, Sep 23, 2012 at 6:51 PM, chris bate <thejollygrimrea...@gmail.com>wrote:

> i used to just use 4 spring washers and some nyloc nuts,
> the spring washers can ride the variance in the filament diameter since
> we've only talking less than 1mm anyway

> I did find though that only two washers were needed depending on the
> filament

> On Sun, Sep 23, 2012 at 6:42 PM, Pamela Hauff <hauff.geor...@gmail.com>wrote:

>> Hi Chris,

>> I am using 3mm ABS filament.

>> Pam

>> On Sun, Sep 23, 2012 at 6:33 PM, chris bate <thejollygrimrea...@gmail.com
>> > wrote:

>>> what size filament are you using?

>>> On Sun, Sep 23, 2012 at 6:09 PM, James Churchill <pel...@gmail.com>wrote:

>>>> But if you've got a knipex you don't wanna risk damaging it by trying
>>>> that, anyway :)

>>>> (I've used them, they're really superb tools.)

>>>> - James

>>>> On 23 September 2012 17:45, Joshua Hogendorn <jhogend...@gmail.com>wrote:

>>>>> I bought some very strong strings from bunnings and cut them to size
>>>>> with a dremel. (never use anything else for springs, with the possible
>>>>> exception of some knipex cutters which will do things like piano wire)

>>>>> --
>>>>> Joshua Hogendorn
>>>>> PH: 0407710007

>>>>> On Sunday, 23 September 2012 at 4:12 PM, Triffid Hunter wrote:

>>>>> If you want some quality prints, I can do some.. you'll have to pay
>>>>> postage as well though, I'm down in northern NSW!

>>>>> https://picasaweb.google.com/lh/photo/oC9RVDeDFRZS_KcdiHkyadMTjNZETYm...

>>>>> https://picasaweb.google.com/lh/photo/UcuTog39yh22jwdnjYeD49MTjNZETYm...

>>>>> :)

>>>>> On Sun, Sep 23, 2012 at 3:07 PM, Pamela Hauff <hauff.geor...@gmail.com
>>>>> > wrote:

>>>>> Hi Yes
>>>>> Thanks Joshua and Luke.
>>>>> I can come to the space on Tuesday but I am penniless till Thursday.
>>>>> Be happy to work something out though.
>>>>> I understand about printing quality my parts were not so good either.

>>>>> Cheers

>>>>> Pam

>>>>> On Sun, Sep 23, 2012 at 3:01 PM, Joshua Hogendorn <
>>>>> jhogend...@gmail.com> wrote:

>>>>> My printer is at the space currently, happy to print you whatever you
>>>>> need :)

>>>>> On 23/09/2012, at 14:57, Luke Hovington <lu...@hovo.id.au> wrote:

>>>>> Come into the space on Tuesday and Im sure someone would be willing to
>>>>> print many parts for you for a small fee..
>>>>> I would offer my parts but they are rather doge (my my standards) and
>>>>> my second printer has just arrive!! so im get to put it together.
>>>>> Most likely be doing that on Tuesday as well if you want to
>>>>> participate..

>>>>> Cheers

>>>>> On Sun, Sep 23, 2012 at 1:14 PM, Pamela Hauff <hauff.geor...@gmail.com
>>>>> > wrote:

>>>>> I am in Coorparoo.

>>>>> Awesome that you can help.

>>>>> Thanks

>>>>> On Sun, Sep 23, 2012 at 12:04 PM, chris bate <
>>>>> thejollygrimrea...@gmail.com> wrote:

>>>>> I've got a few sets of wades extruders here with both the
>>>>> herringbonegears and the normal gears where abouts are you

>>>>> On Sun, Sep 23, 2012 at 10:18 AM, Pamela Hauff <
>>>>> hauff.geor...@gmail.com> wrote:

>>>>> Hi All,
>>>>> My prusa mendel extruder broke!

>>>>> <https://lh6.googleusercontent.com/-gytRbyVbFBY/UF5U4cgq-GI/AAAAAAAAAh...>

>>>>> It used a small 8 tooth gear which was destined to break but I didn't
>>>>> notice until too late.
>>>>> Now I want to switch to a wades extruder.
>>>>> Can anybody help me by printing a good quality set?
>>>>> Willing to pay a reasonable price for the parts.
>>>>> If you have a hobbled bolt too that would be good.

>>>>> Thank You

>>>>> Pam

>>>>> --
>>>>> You received this message because you are subscribed to the Google
>>>>> Groups "hackerspace_brisbane" group.
>>>>> To view this discussion on the web visit
>>>>> https://groups.google.com/d/msg/hackerspace_brisbane/-/Gp3BrARZVaoJ.
>>>>> To post to this group, send email to
>>>>> hackerspace_brisbane@googlegroups.com.
>>>>> To unsubscribe from this group, send email to
>>>>> hackerspace_brisbane+unsubscribe@googlegroups.com.
>>>>> For more options, visit this group at
>>>>> http://groups.google.com/group/hackerspace_brisbane?hl=en.

>>>>> --
>>>>> You received this message because you are subscribed to the Google
>>>>> Groups "hackerspace_brisbane" group.
>>>>> To post to this group, send email to
>>>>> hackerspace_brisbane@googlegroups.com.
>>>>> To unsubscribe from this group, send email to
>>>>> hackerspace_brisbane+unsubscribe@googlegroups.com.
>>>>> For more options, visit this group at
>>>>> http://groups.google.com/group/hackerspace_brisbane?hl=en.

>>>> --
>>>> You received this message because you are subscribed to the Google
>>>> Groups "hackerspace_brisbane" group.
>>>> To post to this group, send email to
>>>> hackerspace_brisbane@googlegroups.com.
>>>> To unsubscribe from this group, send email to
>>>> hackerspace_brisbane+unsubscribe@googlegroups.com.
>>>> For more options, visit this group at
>>>> http://groups.google.com/group/hackerspace_brisbane?hl=en.

>>> --
>>> You received this message because you are subscribed to the Google
>>> Groups "hackerspace_brisbane" group.
>>> To post to this group, send email to
>>> hackerspace_brisbane@googlegroups.com.
>>> To unsubscribe from this group, send email to
>>> hackerspace_brisbane+unsubscribe@googlegroups.com.
>>> For more options, visit this group at
>>> http://groups.google.com/group/hackerspace_brisbane?hl=en.

>> --
>> You received this message because you are subscribed to the Google Groups
>> "hackerspace_brisbane" group.
>> To post to this group, send email to
>> hackerspace_brisbane@googlegroups.com.
>> To unsubscribe from this group, send email to
>> hackerspace_brisbane+unsubscribe@googlegroups.com.
>> For more options, visit this group at
>> http://groups.google.com/group/hackerspace_brisbane?hl=en.

> --
> You received this message because you are subscribed to the Google Groups
> "hackerspace_brisbane" group.
> To post to this group, send email to hackerspace_brisbane@googlegroups.com
> .
> To unsubscribe from this group, send email to
> hackerspace_brisbane+unsubscribe@googlegroups.com.
> For more options, visit this group at
> http://groups.google.com/group/hackerspace_brisbane?hl=en.

Create a group - Google Groups - Google Home - Terms of Service - Privacy Policy

Account Options