It used a small 8 tooth gear which was destined to break but I didn't notice until too late. Now I want to switch to a wades extruder. Can anybody help me by printing a good quality set? Willing to pay a reasonable price for the parts. If you have a hobbled bolt too that would be good.
> It used a small 8 tooth gear which was destined to break but I didn't
> notice until too late.
> Now I want to switch to a wades extruder.
> Can anybody help me by printing a good quality set?
> Willing to pay a reasonable price for the parts.
> If you have a hobbled bolt too that would be good.
> Thank You
> Pam
> --
> You received this message because you are subscribed to the Google Groups
> "hackerspace_brisbane" group.
> To view this discussion on the web visit
> https://groups.google.com/d/msg/hackerspace_brisbane/-/Gp3BrARZVaoJ.
> To post to this group, send email to hackerspace_brisbane@googlegroups.com
> .
> To unsubscribe from this group, send email to
> hackerspace_brisbane+unsubscribe@googlegroups.com.
> For more options, visit this group at
> http://groups.google.com/group/hackerspace_brisbane?hl=en.
>> It used a small 8 tooth gear which was destined to break but I didn't
>> notice until too late.
>> Now I want to switch to a wades extruder.
>> Can anybody help me by printing a good quality set?
>> Willing to pay a reasonable price for the parts.
>> If you have a hobbled bolt too that would be good.
>> Thank You
>> Pam
>> --
>> You received this message because you are subscribed to the Google Groups
>> "hackerspace_brisbane" group.
>> To view this discussion on the web visit
>> https://groups.google.com/d/msg/hackerspace_brisbane/-/Gp3BrARZVaoJ.
>> To post to this group, send email to
>> hackerspace_brisbane@googlegroups.com.
>> To unsubscribe from this group, send email to
>> hackerspace_brisbane+unsubscribe@googlegroups.com.
>> For more options, visit this group at
>> http://groups.google.com/group/hackerspace_brisbane?hl=en.
> --
> You received this message because you are subscribed to the Google Groups
> "hackerspace_brisbane" group.
> To post to this group, send email to hackerspace_brisbane@googlegroups.com
> .
> To unsubscribe from this group, send email to
> hackerspace_brisbane+unsubscribe@googlegroups.com.
> For more options, visit this group at
> http://groups.google.com/group/hackerspace_brisbane?hl=en.
Come into the space on Tuesday and Im sure someone would be willing to
print many parts for you for a small fee..
I would offer my parts but they are rather doge (my my standards) and my
second printer has just arrive!! so im get to put it together.
Most likely be doing that on Tuesday as well if you want to participate..
Cheers
On Sun, Sep 23, 2012 at 1:14 PM, Pamela Hauff <hauff.geor...@gmail.com>wrote:
>>> It used a small 8 tooth gear which was destined to break but I didn't
>>> notice until too late.
>>> Now I want to switch to a wades extruder.
>>> Can anybody help me by printing a good quality set?
>>> Willing to pay a reasonable price for the parts.
>>> If you have a hobbled bolt too that would be good.
>>> Thank You
>>> Pam
>>> --
>>> You received this message because you are subscribed to the Google
>>> Groups "hackerspace_brisbane" group.
>>> To view this discussion on the web visit
>>> https://groups.google.com/d/msg/hackerspace_brisbane/-/Gp3BrARZVaoJ.
>>> To post to this group, send email to
>>> hackerspace_brisbane@googlegroups.com.
>>> To unsubscribe from this group, send email to
>>> hackerspace_brisbane+unsubscribe@googlegroups.com.
>>> For more options, visit this group at
>>> http://groups.google.com/group/hackerspace_brisbane?hl=en.
>> --
>> You received this message because you are subscribed to the Google Groups
>> "hackerspace_brisbane" group.
>> To post to this group, send email to
>> hackerspace_brisbane@googlegroups.com.
>> To unsubscribe from this group, send email to
>> hackerspace_brisbane+unsubscribe@googlegroups.com.
>> For more options, visit this group at
>> http://groups.google.com/group/hackerspace_brisbane?hl=en.
> --
> You received this message because you are subscribed to the Google Groups
> "hackerspace_brisbane" group.
> To post to this group, send email to hackerspace_brisbane@googlegroups.com
> .
> To unsubscribe from this group, send email to
> hackerspace_brisbane+unsubscribe@googlegroups.com.
> For more options, visit this group at
> http://groups.google.com/group/hackerspace_brisbane?hl=en.
> Come into the space on Tuesday and Im sure someone would be willing to print many parts for you for a small fee..
> I would offer my parts but they are rather doge (my my standards) and my second printer has just arrive!! so im get to put it together.
> Most likely be doing that on Tuesday as well if you want to participate..
> Cheers
> On Sun, Sep 23, 2012 at 1:14 PM, Pamela Hauff <hauff.geor...@gmail.com> wrote:
> I am in Coorparoo.
> Awesome that you can help.
> Thanks
> On Sun, Sep 23, 2012 at 12:04 PM, chris bate <thejollygrimrea...@gmail.com> wrote:
> I've got a few sets of wades extruders here with both the herringbonegears and the normal gears where abouts are you
> On Sun, Sep 23, 2012 at 10:18 AM, Pamela Hauff <hauff.geor...@gmail.com> wrote:
> Hi All,
> My prusa mendel extruder broke!
> It used a small 8 tooth gear which was destined to break but I didn't notice until too late.
> Now I want to switch to a wades extruder.
> Can anybody help me by printing a good quality set?
> Willing to pay a reasonable price for the parts.
> If you have a hobbled bolt too that would be good.
> Thank You
> Pam
> -- > You received this message because you are subscribed to the Google Groups "hackerspace_brisbane" group.
> To view this discussion on the web visit https://groups.google.com/d/msg/hackerspace_brisbane/-/Gp3BrARZVaoJ.
> To post to this group, send email to hackerspace_brisbane@googlegroups.com.
> To unsubscribe from this group, send email to hackerspace_brisbane+unsubscribe@googlegroups.com.
> For more options, visit this group at http://groups.google.com/group/hackerspace_brisbane?hl=en.
> -- > You received this message because you are subscribed to the Google Groups "hackerspace_brisbane" group.
> To post to this group, send email to hackerspace_brisbane@googlegroups.com.
> To unsubscribe from this group, send email to hackerspace_brisbane+unsubscribe@googlegroups.com.
> For more options, visit this group at http://groups.google.com/group/hackerspace_brisbane?hl=en.
> -- > You received this message because you are subscribed to the Google Groups "hackerspace_brisbane" group.
> To post to this group, send email to hackerspace_brisbane@googlegroups.com.
> To unsubscribe from this group, send email to hackerspace_brisbane+unsubscribe@googlegroups.com.
> For more options, visit this group at http://groups.google.com/group/hackerspace_brisbane?hl=en.
> -- > You received this message because you are subscribed to the Google Groups "hackerspace_brisbane" group.
> To post to this group, send email to hackerspace_brisbane@googlegroups.com.
> To unsubscribe from this group, send email to hackerspace_brisbane+unsubscribe@googlegroups.com.
> For more options, visit this group at http://groups.google.com/group/hackerspace_brisbane?hl=en.
Hi Yes
Thanks Joshua and Luke.
I can come to the space on Tuesday but I am penniless till Thursday. Be
happy to work something out though.
I understand about printing quality my parts were not so good either.
Cheers
Pam
On Sun, Sep 23, 2012 at 3:01 PM, Joshua Hogendorn <jhogend...@gmail.com>wrote:
> My printer is at the space currently, happy to print you whatever you need
> :)
> On 23/09/2012, at 14:57, Luke Hovington <lu...@hovo.id.au> wrote:
> Come into the space on Tuesday and Im sure someone would be willing to
> print many parts for you for a small fee..
> I would offer my parts but they are rather doge (my my standards) and my
> second printer has just arrive!! so im get to put it together.
> Most likely be doing that on Tuesday as well if you want to participate..
> Cheers
> On Sun, Sep 23, 2012 at 1:14 PM, Pamela Hauff <hauff.geor...@gmail.com>wrote:
>> I am in Coorparoo.
>> Awesome that you can help.
>> Thanks
>> On Sun, Sep 23, 2012 at 12:04 PM, chris bate <
>> thejollygrimrea...@gmail.com> wrote:
>>> I've got a few sets of wades extruders here with both the
>>> herringbonegears and the normal gears where abouts are you
>>> On Sun, Sep 23, 2012 at 10:18 AM, Pamela Hauff <hauff.geor...@gmail.com>wrote:
>>>> It used a small 8 tooth gear which was destined to break but I didn't
>>>> notice until too late.
>>>> Now I want to switch to a wades extruder.
>>>> Can anybody help me by printing a good quality set?
>>>> Willing to pay a reasonable price for the parts.
>>>> If you have a hobbled bolt too that would be good.
>>>> Thank You
>>>> Pam
>>>> --
>>>> You received this message because you are subscribed to the Google
>>>> Groups "hackerspace_brisbane" group.
>>>> To view this discussion on the web visit
>>>> https://groups.google.com/d/msg/hackerspace_brisbane/-/Gp3BrARZVaoJ.
>>>> To post to this group, send email to
>>>> hackerspace_brisbane@googlegroups.com.
>>>> To unsubscribe from this group, send email to
>>>> hackerspace_brisbane+unsubscribe@googlegroups.com.
>>>> For more options, visit this group at
>>>> http://groups.google.com/group/hackerspace_brisbane?hl=en.
>>> --
>>> You received this message because you are subscribed to the Google
>>> Groups "hackerspace_brisbane" group.
>>> To post to this group, send email to
>>> hackerspace_brisbane@googlegroups.com.
>>> To unsubscribe from this group, send email to
>>> hackerspace_brisbane+unsubscribe@googlegroups.com.
>>> For more options, visit this group at
>>> http://groups.google.com/group/hackerspace_brisbane?hl=en.
>> --
>> You received this message because you are subscribed to the Google Groups
>> "hackerspace_brisbane" group.
>> To post to this group, send email to
>> hackerspace_brisbane@googlegroups.com.
>> To unsubscribe from this group, send email to
>> hackerspace_brisbane+unsubscribe@googlegroups.com.
>> For more options, visit this group at
>> http://groups.google.com/group/hackerspace_brisbane?hl=en.
> --
> You received this message because you are subscribed to the Google Groups
> "hackerspace_brisbane" group.
> To post to this group, send email to hackerspace_brisbane@googlegroups.com
> .
> To unsubscribe from this group, send email to
> hackerspace_brisbane+unsubscribe@googlegroups.com.
> For more options, visit this group at
> http://groups.google.com/group/hackerspace_brisbane?hl=en.
> --
> You received this message because you are subscribed to the Google Groups
> "hackerspace_brisbane" group.
> To post to this group, send email to hackerspace_brisbane@googlegroups.com
> .
> To unsubscribe from this group, send email to
> hackerspace_brisbane+unsubscribe@googlegroups.com.
> For more options, visit this group at
> http://groups.google.com/group/hackerspace_brisbane?hl=en.
> Hi Yes
> Thanks Joshua and Luke.
> I can come to the space on Tuesday but I am penniless till Thursday. Be
> happy to work something out though.
> I understand about printing quality my parts were not so good either.
> Cheers
> Pam
> On Sun, Sep 23, 2012 at 3:01 PM, Joshua Hogendorn <jhogend...@gmail.com>wrote:
>> My printer is at the space currently, happy to print you whatever you
>> need :)
>> On 23/09/2012, at 14:57, Luke Hovington <lu...@hovo.id.au> wrote:
>> Come into the space on Tuesday and Im sure someone would be willing to
>> print many parts for you for a small fee..
>> I would offer my parts but they are rather doge (my my standards) and my
>> second printer has just arrive!! so im get to put it together.
>> Most likely be doing that on Tuesday as well if you want to participate..
>> Cheers
>> On Sun, Sep 23, 2012 at 1:14 PM, Pamela Hauff <hauff.geor...@gmail.com>wrote:
>>> I am in Coorparoo.
>>> Awesome that you can help.
>>> Thanks
>>> On Sun, Sep 23, 2012 at 12:04 PM, chris bate <
>>> thejollygrimrea...@gmail.com> wrote:
>>>> I've got a few sets of wades extruders here with both the
>>>> herringbonegears and the normal gears where abouts are you
>>>> On Sun, Sep 23, 2012 at 10:18 AM, Pamela Hauff <hauff.geor...@gmail.com
>>>> > wrote:
>>>>> Hi All,
>>>>> My prusa mendel extruder broke!
>>>>> It used a small 8 tooth gear which was destined to break but I didn't
>>>>> notice until too late.
>>>>> Now I want to switch to a wades extruder.
>>>>> Can anybody help me by printing a good quality set?
>>>>> Willing to pay a reasonable price for the parts.
>>>>> If you have a hobbled bolt too that would be good.
>>>>> Thank You
>>>>> Pam
>>>>> --
>>>>> You received this message because you are subscribed to the Google
>>>>> Groups "hackerspace_brisbane" group.
>>>>> To view this discussion on the web visit
>>>>> https://groups.google.com/d/msg/hackerspace_brisbane/-/Gp3BrARZVaoJ.
>>>>> To post to this group, send email to
>>>>> hackerspace_brisbane@googlegroups.com.
>>>>> To unsubscribe from this group, send email to
>>>>> hackerspace_brisbane+unsubscribe@googlegroups.com.
>>>>> For more options, visit this group at
>>>>> http://groups.google.com/group/hackerspace_brisbane?hl=en.
>>>> --
>>>> You received this message because you are subscribed to the Google
>>>> Groups "hackerspace_brisbane" group.
>>>> To post to this group, send email to
>>>> hackerspace_brisbane@googlegroups.com.
>>>> To unsubscribe from this group, send email to
>>>> hackerspace_brisbane+unsubscribe@googlegroups.com.
>>>> For more options, visit this group at
>>>> http://groups.google.com/group/hackerspace_brisbane?hl=en.
>>> --
>>> You received this message because you are subscribed to the Google
>>> Groups "hackerspace_brisbane" group.
>>> To post to this group, send email to
>>> hackerspace_brisbane@googlegroups.com.
>>> To unsubscribe from this group, send email to
>>> hackerspace_brisbane+unsubscribe@googlegroups.com.
>>> For more options, visit this group at
>>> http://groups.google.com/group/hackerspace_brisbane?hl=en.
>> --
>> You received this message because you are subscribed to the Google Groups
>> "hackerspace_brisbane" group.
>> To post to this group, send email to
>> hackerspace_brisbane@googlegroups.com.
>> To unsubscribe from this group, send email to
>> hackerspace_brisbane+unsubscribe@googlegroups.com.
>> For more options, visit this group at
>> http://groups.google.com/group/hackerspace_brisbane?hl=en.
>> --
>> You received this message because you are subscribed to the Google Groups
>> "hackerspace_brisbane" group.
>> To post to this group, send email to
>> hackerspace_brisbane@googlegroups.com.
>> To unsubscribe from this group, send email to
>> hackerspace_brisbane+unsubscribe@googlegroups.com.
>> For more options, visit this group at
>> http://groups.google.com/group/hackerspace_brisbane?hl=en.
> --
> You received this message because you are subscribed to the Google Groups
> "hackerspace_brisbane" group.
> To post to this group, send email to hackerspace_brisbane@googlegroups.com
> .
> To unsubscribe from this group, send email to
> hackerspace_brisbane+unsubscribe@googlegroups.com.
> For more options, visit this group at
> http://groups.google.com/group/hackerspace_brisbane?hl=en.
> On Sun, Sep 23, 2012 at 3:07 PM, Pamela Hauff <hauff.geor...@gmail.com>wrote:
>> Hi Yes
>> Thanks Joshua and Luke.
>> I can come to the space on Tuesday but I am penniless till Thursday. Be
>> happy to work something out though.
>> I understand about printing quality my parts were not so good either.
>> Cheers
>> Pam
>> On Sun, Sep 23, 2012 at 3:01 PM, Joshua Hogendorn <jhogend...@gmail.com>wrote:
>>> My printer is at the space currently, happy to print you whatever you
>>> need :)
>>> On 23/09/2012, at 14:57, Luke Hovington <lu...@hovo.id.au> wrote:
>>> Come into the space on Tuesday and Im sure someone would be willing to
>>> print many parts for you for a small fee..
>>> I would offer my parts but they are rather doge (my my standards) and my
>>> second printer has just arrive!! so im get to put it together.
>>> Most likely be doing that on Tuesday as well if you want to participate..
>>> Cheers
>>> On Sun, Sep 23, 2012 at 1:14 PM, Pamela Hauff <hauff.geor...@gmail.com>wrote:
>>>> I am in Coorparoo.
>>>> Awesome that you can help.
>>>> Thanks
>>>> On Sun, Sep 23, 2012 at 12:04 PM, chris bate <
>>>> thejollygrimrea...@gmail.com> wrote:
>>>>> I've got a few sets of wades extruders here with both the
>>>>> herringbonegears and the normal gears where abouts are you
>>>>> On Sun, Sep 23, 2012 at 10:18 AM, Pamela Hauff <
>>>>> hauff.geor...@gmail.com> wrote:
>>>>>> Hi All,
>>>>>> My prusa mendel extruder broke!
>>>>>> It used a small 8 tooth gear which was destined to break but I didn't
>>>>>> notice until too late.
>>>>>> Now I want to switch to a wades extruder.
>>>>>> Can anybody help me by printing a good quality set?
>>>>>> Willing to pay a reasonable price for the parts.
>>>>>> If you have a hobbled bolt too that would be good.
>>>>>> Thank You
>>>>>> Pam
>>>>>> --
>>>>>> You received this message because you are subscribed to the Google
>>>>>> Groups "hackerspace_brisbane" group.
>>>>>> To view this discussion on the web visit
>>>>>> https://groups.google.com/d/msg/hackerspace_brisbane/-/Gp3BrARZVaoJ.
>>>>>> To post to this group, send email to
>>>>>> hackerspace_brisbane@googlegroups.com.
>>>>>> To unsubscribe from this group, send email to
>>>>>> hackerspace_brisbane+unsubscribe@googlegroups.com.
>>>>>> For more options, visit this group at
>>>>>> http://groups.google.com/group/hackerspace_brisbane?hl=en.
>>>>> --
>>>>> You received this message because you are subscribed to the Google
>>>>> Groups "hackerspace_brisbane" group.
>>>>> To post to this group, send email to
>>>>> hackerspace_brisbane@googlegroups.com.
>>>>> To unsubscribe from this group, send email to
>>>>> hackerspace_brisbane+unsubscribe@googlegroups.com.
>>>>> For more options, visit this group at
>>>>> http://groups.google.com/group/hackerspace_brisbane?hl=en.
>>>> --
>>>> You received this message because you are subscribed to the Google
>>>> Groups "hackerspace_brisbane" group.
>>>> To post to this group, send email to
>>>> hackerspace_brisbane@googlegroups.com.
>>>> To unsubscribe from this group, send email to
>>>> hackerspace_brisbane+unsubscribe@googlegroups.com.
>>>> For more options, visit this group at
>>>> http://groups.google.com/group/hackerspace_brisbane?hl=en.
>>> --
>>> You received this message because you are subscribed to the Google
>>> Groups "hackerspace_brisbane" group.
>>> To post to this group, send email to
>>> hackerspace_brisbane@googlegroups.com.
>>> To unsubscribe from this group, send email to
>>> hackerspace_brisbane+unsubscribe@googlegroups.com.
>>> For more options, visit this group at
>>> http://groups.google.com/group/hackerspace_brisbane?hl=en.
>>> --
>>> You received this message because you are subscribed to the Google
>>> Groups "hackerspace_brisbane" group.
>>> To post to this group, send email to
>>> hackerspace_brisbane@googlegroups.com.
>>> To unsubscribe from this group, send email to
>>> hackerspace_brisbane+unsubscribe@googlegroups.com.
>>> For more options, visit this group at
>>> http://groups.google.com/group/hackerspace_brisbane?hl=en.
>> --
>> You received this message because you are subscribed to the Google Groups
>> "hackerspace_brisbane" group.
>> To post to this group, send email to
>> hackerspace_brisbane@googlegroups.com.
>> To unsubscribe from this group, send email to
>> hackerspace_brisbane+unsubscribe@googlegroups.com.
>> For more options, visit this group at
>> http://groups.google.com/group/hackerspace_brisbane?hl=en.
> --
> You received this message because you are subscribed to the Google Groups
> "hackerspace_brisbane" group.
> To post to this group, send email to hackerspace_brisbane@googlegroups.com
> .
> To unsubscribe from this group, send email to
> hackerspace_brisbane+unsubscribe@googlegroups.com.
> For more options, visit this group at
> http://groups.google.com/group/hackerspace_brisbane?hl=en.
>> On Sun, Sep 23, 2012 at 3:07 PM, Pamela Hauff <hauff.geor...@gmail.com>wrote:
>>> Hi Yes
>>> Thanks Joshua and Luke.
>>> I can come to the space on Tuesday but I am penniless till Thursday. Be
>>> happy to work something out though.
>>> I understand about printing quality my parts were not so good either.
>>> Cheers
>>> Pam
>>> On Sun, Sep 23, 2012 at 3:01 PM, Joshua Hogendorn <jhogend...@gmail.com>wrote:
>>>> My printer is at the space currently, happy to print you whatever you
>>>> need :)
>>>> On 23/09/2012, at 14:57, Luke Hovington <lu...@hovo.id.au> wrote:
>>>> Come into the space on Tuesday and Im sure someone would be willing to
>>>> print many parts for you for a small fee..
>>>> I would offer my parts but they are rather doge (my my standards) and
>>>> my second printer has just arrive!! so im get to put it together.
>>>> Most likely be doing that on Tuesday as well if you want to
>>>> participate..
>>>> Cheers
>>>> On Sun, Sep 23, 2012 at 1:14 PM, Pamela Hauff <hauff.geor...@gmail.com>wrote:
>>>>> I am in Coorparoo.
>>>>> Awesome that you can help.
>>>>> Thanks
>>>>> On Sun, Sep 23, 2012 at 12:04 PM, chris bate <
>>>>> thejollygrimrea...@gmail.com> wrote:
>>>>>> I've got a few sets of wades extruders here with both the
>>>>>> herringbonegears and the normal gears where abouts are you
>>>>>> On Sun, Sep 23, 2012 at 10:18 AM, Pamela Hauff <
>>>>>> hauff.geor...@gmail.com> wrote:
>>>>>>> Hi All,
>>>>>>> My prusa mendel extruder broke!
>>>>>>> It used a small 8 tooth gear which was destined to break but I
>>>>>>> didn't notice until too late.
>>>>>>> Now I want to switch to a wades extruder.
>>>>>>> Can anybody help me by printing a good quality set?
>>>>>>> Willing to pay a reasonable price for the parts.
>>>>>>> If you have a hobbled bolt too that would be good.
>>>>>>> Thank You
>>>>>>> Pam
>>>>>>> --
>>>>>>> You received this message because you are subscribed to the Google
>>>>>>> Groups "hackerspace_brisbane" group.
>>>>>>> To view this discussion on the web visit
>>>>>>> https://groups.google.com/d/msg/hackerspace_brisbane/-/Gp3BrARZVaoJ.
>>>>>>> To post to this group, send email to
>>>>>>> hackerspace_brisbane@googlegroups.com.
>>>>>>> To unsubscribe from this group, send email to
>>>>>>> hackerspace_brisbane+unsubscribe@googlegroups.com.
>>>>>>> For more options, visit this group at
>>>>>>> http://groups.google.com/group/hackerspace_brisbane?hl=en.
>>>>>> --
>>>>>> You received this message because you are subscribed to the Google
>>>>>> Groups "hackerspace_brisbane" group.
>>>>>> To post to this group, send email to
>>>>>> hackerspace_brisbane@googlegroups.com.
>>>>>> To unsubscribe from this group, send email to
>>>>>> hackerspace_brisbane+unsubscribe@googlegroups.com.
>>>>>> For more options, visit this group at
>>>>>> http://groups.google.com/group/hackerspace_brisbane?hl=en.
>>>>> --
>>>>> You received this message because you are subscribed to the Google
>>>>> Groups "hackerspace_brisbane" group.
>>>>> To post to this group, send email to
>>>>> hackerspace_brisbane@googlegroups.com.
>>>>> To unsubscribe from this group, send email to
>>>>> hackerspace_brisbane+unsubscribe@googlegroups.com.
>>>>> For more options, visit this group at
>>>>> http://groups.google.com/group/hackerspace_brisbane?hl=en.
>>>> --
>>>> You received this message because you are subscribed to the Google
>>>> Groups "hackerspace_brisbane" group.
>>>> To post to this group, send email to
>>>> hackerspace_brisbane@googlegroups.com.
>>>> To unsubscribe from this group, send email to
>>>> hackerspace_brisbane+unsubscribe@googlegroups.com.
>>>> For more options, visit this group at
>>>> http://groups.google.com/group/hackerspace_brisbane?hl=en.
>>>> --
>>>> You received this message because you are subscribed to the Google
>>>> Groups "hackerspace_brisbane" group.
>>>> To post to this group, send email to
>>>> hackerspace_brisbane@googlegroups.com.
>>>> To unsubscribe from this group, send email to
>>>> hackerspace_brisbane+unsubscribe@googlegroups.com.
>>>> For more options, visit this group at
>>>> http://groups.google.com/group/hackerspace_brisbane?hl=en.
>>> --
>>> You received this message because you are subscribed to the Google
>>> Groups "hackerspace_brisbane" group.
>>> To post to this group, send email to
>>> hackerspace_brisbane@googlegroups.com.
>>> To unsubscribe from this group, send email to
>>> hackerspace_brisbane+unsubscribe@googlegroups.com.
>>> For more options, visit this group at
>>> http://groups.google.com/group/hackerspace_brisbane?hl=en.
>> --
>> You received this message because you are subscribed to the Google Groups
>> "hackerspace_brisbane" group.
>> To post to this group, send email to
>> hackerspace_brisbane@googlegroups.com.
>> To unsubscribe from this group, send email to
>> hackerspace_brisbane+unsubscribe@googlegroups.com.
>> For more options, visit this group at
>> http://groups.google.com/group/hackerspace_brisbane?hl=en.
I bought some very strong strings from bunnings and cut them to size with a dremel. (never use anything else for springs, with the possible exception of some knipex cutters which will do things like piano wire)
On Sunday, 23 September 2012 at 4:12 PM, Triffid Hunter wrote:
> If you want some quality prints, I can do some.. you'll have to pay postage as well though, I'm down in northern NSW!
> On Sun, Sep 23, 2012 at 3:07 PM, Pamela Hauff <hauff.geor...@gmail.com (mailto:hauff.geor...@gmail.com)> wrote:
> > Hi Yes
> > Thanks Joshua and Luke.
> > I can come to the space on Tuesday but I am penniless till Thursday. Be happy to work something out though.
> > I understand about printing quality my parts were not so good either.
> > Cheers
> > Pam
> > On Sun, Sep 23, 2012 at 3:01 PM, Joshua Hogendorn <jhogend...@gmail.com (mailto:jhogend...@gmail.com)> wrote:
> > > My printer is at the space currently, happy to print you whatever you need :)
> > > On 23/09/2012, at 14:57, Luke Hovington <lu...@hovo.id.au (mailto:lu...@hovo.id.au)> wrote:
> > > > Come into the space on Tuesday and Im sure someone would be willing to print many parts for you for a small fee..
> > > > I would offer my parts but they are rather doge (my my standards) and my second printer has just arrive!! so im get to put it together.
> > > > Most likely be doing that on Tuesday as well if you want to participate..
> > > > Cheers
> > > > On Sun, Sep 23, 2012 at 1:14 PM, Pamela Hauff <hauff.geor...@gmail.com (mailto:hauff.geor...@gmail.com)> wrote:
> > > > > I am in Coorparoo.
> > > > > Awesome that you can help.
> > > > > Thanks
> > > > > On Sun, Sep 23, 2012 at 12:04 PM, chris bate <thejollygrimrea...@gmail.com (mailto:thejollygrimrea...@gmail.com)> wrote:
> > > > > > I've got a few sets of wades extruders here with both the herringbonegears and the normal gears where abouts are you
> > > > > > On Sun, Sep 23, 2012 at 10:18 AM, Pamela Hauff <hauff.geor...@gmail.com (mailto:hauff.geor...@gmail.com)> wrote:
> > > > > > > Hi All,
> > > > > > > My prusa mendel extruder broke!
> > > > > > > It used a small 8 tooth gear which was destined to break but I didn't notice until too late.
> > > > > > > Now I want to switch to a wades extruder.
> > > > > > > Can anybody help me by printing a good quality set?
> > > > > > > Willing to pay a reasonable price for the parts.
> > > > > > > If you have a hobbled bolt too that would be good.
> > > > > > > Thank You
> > > > > > > Pam
> > > > > > > -- > > > > > > > You received this message because you are subscribed to the Google Groups "hackerspace_brisbane" group.
> > > > > > > To view this discussion on the web visit https://groups.google.com/d/msg/hackerspace_brisbane/-/Gp3BrARZVaoJ.
> > > > > > > To post to this group, send email to hackerspace_brisbane@googlegroups.com (mailto:hackerspace_brisbane@googlegroups.com).
> > > > > > > To unsubscribe from this group, send email to hackerspace_brisbane+unsubscribe@googlegroups.com (mailto:hackerspace_brisbane%2Bunsubscribe@googlegroups.com).
> > > > > > > For more options, visit this group at http://groups.google.com/group/hackerspace_brisbane?hl=en.
> > > > > > -- > > > > > > You received this message because you are subscribed to the Google Groups "hackerspace_brisbane" group.
> > > > > > To post to this group, send email to hackerspace_brisbane@googlegroups.com (mailto:hackerspace_brisbane@googlegroups.com).
> > > > > > To unsubscribe from this group, send email to hackerspace_brisbane+unsubscribe@googlegroups.com (mailto:hackerspace_brisbane%2Bunsubscribe@googlegroups.com).
> > > > > > For more options, visit this group at http://groups.google.com/group/hackerspace_brisbane?hl=en.
> > > > > -- > > > > > You received this message because you are subscribed to the Google Groups "hackerspace_brisbane" group.
> > > > > To post to this group, send email to hackerspace_brisbane@googlegroups.com (mailto:hackerspace_brisbane@googlegroups.com).
> > > > > To unsubscribe from this group, send email to hackerspace_brisbane+unsubscribe@googlegroups.com (mailto:hackerspace_brisbane%2Bunsubscribe@googlegroups.com).
> > > > > For more options, visit this group at http://groups.google.com/group/hackerspace_brisbane?hl=en.
> > > > -- > > > > You received this message because you are subscribed to the Google Groups "hackerspace_brisbane" group.
> > > > To post to this group, send email to hackerspace_brisbane@googlegroups.com (mailto:hackerspace_brisbane@googlegroups.com).
> > > > To unsubscribe from this group, send email to hackerspace_brisbane+unsubscribe@googlegroups.com (mailto:hackerspace_brisbane+unsubscribe@googlegroups.com).
> > > > For more options, visit this group at http://groups.google.com/group/hackerspace_brisbane?hl=en.
> > > -- > > > You received this message because you are subscribed to the Google Groups "hackerspace_brisbane" group.
> > > To post to this group, send email to hackerspace_brisbane@googlegroups.com (mailto:hackerspace_brisbane@googlegroups.com).
> > > To unsubscribe from this group, send email to hackerspace_brisbane+unsubscribe@googlegroups.com (mailto:hackerspace_brisbane%2Bunsubscribe@googlegroups.com).
> > > For more options, visit this group at http://groups.google.com/group/hackerspace_brisbane?hl=en.
> > -- > > You received this message because you are subscribed to the Google Groups "hackerspace_brisbane" group.
> > To post to this group, send email to hackerspace_brisbane@googlegroups.com (mailto:hackerspace_brisbane@googlegroups.com).
> > To unsubscribe from this group, send email to hackerspace_brisbane+unsubscribe@googlegroups.com (mailto:hackerspace_brisbane%2Bunsubscribe@googlegroups.com).
> > For more options, visit this group at http://groups.google.com/group/hackerspace_brisbane?hl=en.
> -- > You received this message because you are subscribed to the Google Groups "hackerspace_brisbane" group.
> To post to this group, send email to hackerspace_brisbane@googlegroups.com (mailto:hackerspace_brisbane@googlegroups.com).
> To unsubscribe from this group, send email to hackerspace_brisbane+unsubscribe@googlegroups.com (mailto:hackerspace_brisbane+unsubscribe@googlegroups.com).
> For more options, visit this group at http://groups.google.com/group/hackerspace_brisbane?hl=en.
> I bought some very strong strings from bunnings and cut them to size
> with a dremel. (never use anything else for springs, with the possible
> exception of some knipex cutters which will do things like piano wire)
> --
> Joshua Hogendorn
> PH: 0407710007
> On Sunday, 23 September 2012 at 4:12 PM, Triffid Hunter wrote:
> If you want some quality prints, I can do some.. you'll have to pay
> postage as well though, I'm down in northern NSW!
> On Sun, Sep 23, 2012 at 3:07 PM, Pamela Hauff <hauff.geor...@gmail.com>wrote:
> Hi Yes
> Thanks Joshua and Luke.
> I can come to the space on Tuesday but I am penniless till Thursday. Be
> happy to work something out though.
> I understand about printing quality my parts were not so good either.
> Cheers
> Pam
> On Sun, Sep 23, 2012 at 3:01 PM, Joshua Hogendorn <jhogend...@gmail.com>wrote:
> My printer is at the space currently, happy to print you whatever you need
> :)
> On 23/09/2012, at 14:57, Luke Hovington <lu...@hovo.id.au> wrote:
> Come into the space on Tuesday and Im sure someone would be willing to
> print many parts for you for a small fee..
> I would offer my parts but they are rather doge (my my standards) and my
> second printer has just arrive!! so im get to put it together.
> Most likely be doing that on Tuesday as well if you want to participate..
> Cheers
> On Sun, Sep 23, 2012 at 1:14 PM, Pamela Hauff <hauff.geor...@gmail.com>wrote:
> I am in Coorparoo.
> Awesome that you can help.
> Thanks
> On Sun, Sep 23, 2012 at 12:04 PM, chris bate <thejollygrimrea...@gmail.com
> > wrote:
> I've got a few sets of wades extruders here with both the herringbonegears
> and the normal gears where abouts are you
> On Sun, Sep 23, 2012 at 10:18 AM, Pamela Hauff <hauff.geor...@gmail.com>wrote:
> It used a small 8 tooth gear which was destined to break but I didn't
> notice until too late.
> Now I want to switch to a wades extruder.
> Can anybody help me by printing a good quality set?
> Willing to pay a reasonable price for the parts.
> If you have a hobbled bolt too that would be good.
> Thank You
> Pam
> --
> You received this message because you are subscribed to the Google Groups
> "hackerspace_brisbane" group.
> To view this discussion on the web visit
> https://groups.google.com/d/msg/hackerspace_brisbane/-/Gp3BrARZVaoJ.
> To post to this group, send email to hackerspace_brisbane@googlegroups.com
> .
> To unsubscribe from this group, send email to
> hackerspace_brisbane+unsubscribe@googlegroups.com.
> For more options, visit this group at
> http://groups.google.com/group/hackerspace_brisbane?hl=en.
> --
> You received this message because you are subscribed to the Google Groups
> "hackerspace_brisbane" group.
> To post to this group, send email to hackerspace_brisbane@googlegroups.com
> .
> To unsubscribe from this group, send email to
> hackerspace_brisbane+unsubscribe@googlegroups.com.
> For more options, visit this group at
> http://groups.google.com/group/hackerspace_brisbane?hl=en.
> --
> You received this message because you are subscribed to the Google Groups
> "hackerspace_brisbane" group.
> To post to this group, send email to hackerspace_brisbane@googlegroups.com
> .
> To unsubscribe from this group, send email to
> hackerspace_brisbane+unsubscribe@googlegroups.com.
> For more options, visit this group at
> http://groups.google.com/group/hackerspace_brisbane?hl=en.
> --
> You received this message because you are subscribed to the Google Groups
> "hackerspace_brisbane" group.
> To post to this group, send email to hackerspace_brisbane@googlegroups.com
> .
> To unsubscribe from this group, send email to
> hackerspace_brisbane+unsubscribe@googlegroups.com.
> For more options, visit this group at
> http://groups.google.com/group/hackerspace_brisbane?hl=en.
> --
> You received this message because you are subscribed to the Google Groups
> "hackerspace_brisbane" group.
> To post to this group, send email to hackerspace_brisbane@googlegroups.com
> .
> To unsubscribe from this group, send email to
> hackerspace_brisbane+unsubscribe@googlegroups.com.
> For more options, visit this group at
> http://groups.google.com/group/hackerspace_brisbane?hl=en.
> --
> You received this message because you are subscribed to the Google Groups
> "hackerspace_brisbane" group.
> To post to this group, send email to hackerspace_brisbane@googlegroups.com
> .
> To unsubscribe from this group, send email to
> hackerspace_brisbane+unsubscribe@googlegroups.com.
> For more options, visit this group at
> http://groups.google.com/group/hackerspace_brisbane?hl=en.
> --
> You received this message because you are subscribed to the Google Groups
> "hackerspace_brisbane" group.
> To post to this group, send email to hackerspace_brisbane@googlegroups.com
> .
> To unsubscribe from this group, send email to
> hackerspace_brisbane+unsubscribe@googlegroups.com.
> For more options, visit this group at
> http://groups.google.com/group/hackerspace_brisbane?hl=en.
> --
> You received this message because you are subscribed to the Google Groups
> "hackerspace_brisbane" group.
> To post to this group, send email to hackerspace_brisbane@googlegroups.com
> .
> To unsubscribe from this group, send email to
> hackerspace_brisbane+unsubscribe@googlegroups.com.
> For more options, visit this group at
> http://groups.google.com/group/hackerspace_brisbane?hl=en.
On Sun, Sep 23, 2012 at 6:09 PM, James Churchill <pel...@gmail.com> wrote:
> But if you've got a knipex you don't wanna risk damaging it by trying
> that, anyway :)
> (I've used them, they're really superb tools.)
> - James
> On 23 September 2012 17:45, Joshua Hogendorn <jhogend...@gmail.com> wrote:
>> I bought some very strong strings from bunnings and cut them to size
>> with a dremel. (never use anything else for springs, with the possible
>> exception of some knipex cutters which will do things like piano wire)
>> --
>> Joshua Hogendorn
>> PH: 0407710007
>> On Sunday, 23 September 2012 at 4:12 PM, Triffid Hunter wrote:
>> If you want some quality prints, I can do some.. you'll have to pay
>> postage as well though, I'm down in northern NSW!
>> On Sun, Sep 23, 2012 at 3:07 PM, Pamela Hauff <hauff.geor...@gmail.com>wrote:
>> Hi Yes
>> Thanks Joshua and Luke.
>> I can come to the space on Tuesday but I am penniless till Thursday. Be
>> happy to work something out though.
>> I understand about printing quality my parts were not so good either.
>> Cheers
>> Pam
>> On Sun, Sep 23, 2012 at 3:01 PM, Joshua Hogendorn <jhogend...@gmail.com>wrote:
>> My printer is at the space currently, happy to print you whatever you
>> need :)
>> On 23/09/2012, at 14:57, Luke Hovington <lu...@hovo.id.au> wrote:
>> Come into the space on Tuesday and Im sure someone would be willing to
>> print many parts for you for a small fee..
>> I would offer my parts but they are rather doge (my my standards) and my
>> second printer has just arrive!! so im get to put it together.
>> Most likely be doing that on Tuesday as well if you want to participate..
>> Cheers
>> On Sun, Sep 23, 2012 at 1:14 PM, Pamela Hauff <hauff.geor...@gmail.com>wrote:
>> I am in Coorparoo.
>> Awesome that you can help.
>> Thanks
>> On Sun, Sep 23, 2012 at 12:04 PM, chris bate <
>> thejollygrimrea...@gmail.com> wrote:
>> I've got a few sets of wades extruders here with both the
>> herringbonegears and the normal gears where abouts are you
>> On Sun, Sep 23, 2012 at 10:18 AM, Pamela Hauff <hauff.geor...@gmail.com>wrote:
>> It used a small 8 tooth gear which was destined to break but I didn't
>> notice until too late.
>> Now I want to switch to a wades extruder.
>> Can anybody help me by printing a good quality set?
>> Willing to pay a reasonable price for the parts.
>> If you have a hobbled bolt too that would be good.
>> Thank You
>> Pam
>> --
>> You received this message because you are subscribed to the Google Groups
>> "hackerspace_brisbane" group.
>> To view this discussion on the web visit
>> https://groups.google.com/d/msg/hackerspace_brisbane/-/Gp3BrARZVaoJ.
>> To post to this group, send email to
>> hackerspace_brisbane@googlegroups.com.
>> To unsubscribe from this group, send email to
>> hackerspace_brisbane+unsubscribe@googlegroups.com.
>> For more options, visit this group at
>> http://groups.google.com/group/hackerspace_brisbane?hl=en.
>> --
>> You received this message because you are subscribed to the Google Groups
>> "hackerspace_brisbane" group.
>> To post to this group, send email to
>> hackerspace_brisbane@googlegroups.com.
>> To unsubscribe from this group, send email to
>> hackerspace_brisbane+unsubscribe@googlegroups.com.
>> For more options, visit this group at
>> http://groups.google.com/group/hackerspace_brisbane?hl=en.
>> --
>> You received this message because you are subscribed to the Google Groups
>> "hackerspace_brisbane" group.
>> To post to this group, send email to
>> hackerspace_brisbane@googlegroups.com.
>> To unsubscribe from this group, send email to
>> hackerspace_brisbane+unsubscribe@googlegroups.com.
>> For more options, visit this group at
>> http://groups.google.com/group/hackerspace_brisbane?hl=en.
>> --
>> You received this message because you are subscribed to the Google Groups
>> "hackerspace_brisbane" group.
>> To post to this group, send email to
>> hackerspace_brisbane@googlegroups.com.
>> To unsubscribe from this group, send email to
>> hackerspace_brisbane+unsubscribe@googlegroups.com.
>> For more options, visit this group at
>> http://groups.google.com/group/hackerspace_brisbane?hl=en.
>> --
>> You received this message because you are subscribed to the Google Groups
>> "hackerspace_brisbane" group.
>> To post to this group, send email to
>> hackerspace_brisbane@googlegroups.com.
>> To unsubscribe from this group, send email to
>> hackerspace_brisbane+unsubscribe@googlegroups.com.
>> For more options, visit this group at
>> http://groups.google.com/group/hackerspace_brisbane?hl=en.
>> --
>> You received this message because you are subscribed to the Google Groups
>> "hackerspace_brisbane" group.
>> To post to this group, send email to
>> hackerspace_brisbane@googlegroups.com.
>> To unsubscribe from this group, send email to
>> hackerspace_brisbane+unsubscribe@googlegroups.com.
>> For more options, visit this group at
>> http://groups.google.com/group/hackerspace_brisbane?hl=en.
>> --
>> You received this message because you are subscribed to the Google Groups
>> "hackerspace_brisbane" group.
>> To post to this group, send email to
>> hackerspace_brisbane@googlegroups.com.
>> To unsubscribe from this group, send email to
>> hackerspace_brisbane+unsubscribe@googlegroups.com.
>> For more options, visit this group at
>> http://groups.google.com/group/hackerspace_brisbane?hl=en.
>> --
>> You received this message because you are subscribed to the Google Groups
>> "hackerspace_brisbane" group.
>> To post to this group, send email to
>> hackerspace_brisbane@googlegroups.com.
>> To unsubscribe from this group, send email to
>> hackerspace_brisbane+unsubscribe@googlegroups.com.
>> For more options, visit this group at
>> http://groups.google.com/group/hackerspace_brisbane?hl=en.
> --
> You received this message because you are subscribed to the Google Groups
> "hackerspace_brisbane" group.
> To post to this group, send email to hackerspace_brisbane@googlegroups.com
> .
> To unsubscribe from this group, send email to
> hackerspace_brisbane+unsubscribe@googlegroups.com.
> For more options, visit this group at
> http://groups.google.com/group/hackerspace_brisbane?hl=en.
Here is some spring specs from rs-australia
Spring,compression,music wire,6.0 diax34.5mmEnds Closed (Square)/Ground Free
Length 34.5mm Load at Minimum Working Length 43.74N Material Steel
Alloy Minimum
Working Length 24.6mm Outside Diameter 6mm Spring Rate 4.4N/mm Wire Diameter
1mm
These are $31.60 in a pack of 10.
And using m4 threaded rod 1m cut to the right lengths with m4 lock nuts and
m4 washers.
M4 threaded rod is about $10.
On Sun, Sep 23, 2012 at 6:09 PM, James Churchill <pel...@gmail.com> wrote:
> But if you've got a knipex you don't wanna risk damaging it by trying
> that, anyway :)
> (I've used them, they're really superb tools.)
> - James
> On 23 September 2012 17:45, Joshua Hogendorn <jhogend...@gmail.com> wrote:
>> I bought some very strong strings from bunnings and cut them to size
>> with a dremel. (never use anything else for springs, with the possible
>> exception of some knipex cutters which will do things like piano wire)
>> --
>> Joshua Hogendorn
>> PH: 0407710007
>> On Sunday, 23 September 2012 at 4:12 PM, Triffid Hunter wrote:
>> If you want some quality prints, I can do some.. you'll have to pay
>> postage as well though, I'm down in northern NSW!
>> On Sun, Sep 23, 2012 at 3:07 PM, Pamela Hauff <hauff.geor...@gmail.com>wrote:
>> Hi Yes
>> Thanks Joshua and Luke.
>> I can come to the space on Tuesday but I am penniless till Thursday. Be
>> happy to work something out though.
>> I understand about printing quality my parts were not so good either.
>> Cheers
>> Pam
>> On Sun, Sep 23, 2012 at 3:01 PM, Joshua Hogendorn <jhogend...@gmail.com>wrote:
>> My printer is at the space currently, happy to print you whatever you
>> need :)
>> On 23/09/2012, at 14:57, Luke Hovington <lu...@hovo.id.au> wrote:
>> Come into the space on Tuesday and Im sure someone would be willing to
>> print many parts for you for a small fee..
>> I would offer my parts but they are rather doge (my my standards) and my
>> second printer has just arrive!! so im get to put it together.
>> Most likely be doing that on Tuesday as well if you want to participate..
>> Cheers
>> On Sun, Sep 23, 2012 at 1:14 PM, Pamela Hauff <hauff.geor...@gmail.com>wrote:
>> I am in Coorparoo.
>> Awesome that you can help.
>> Thanks
>> On Sun, Sep 23, 2012 at 12:04 PM, chris bate <
>> thejollygrimrea...@gmail.com> wrote:
>> I've got a few sets of wades extruders here with both the
>> herringbonegears and the normal gears where abouts are you
>> On Sun, Sep 23, 2012 at 10:18 AM, Pamela Hauff <hauff.geor...@gmail.com>wrote:
>> It used a small 8 tooth gear which was destined to break but I didn't
>> notice until too late.
>> Now I want to switch to a wades extruder.
>> Can anybody help me by printing a good quality set?
>> Willing to pay a reasonable price for the parts.
>> If you have a hobbled bolt too that would be good.
>> Thank You
>> Pam
>> --
>> You received this message because you are subscribed to the Google Groups
>> "hackerspace_brisbane" group.
>> To view this discussion on the web visit
>> https://groups.google.com/d/msg/hackerspace_brisbane/-/Gp3BrARZVaoJ.
>> To post to this group, send email to
>> hackerspace_brisbane@googlegroups.com.
>> To unsubscribe from this group, send email to
>> hackerspace_brisbane+unsubscribe@googlegroups.com.
>> For more options, visit this group at
>> http://groups.google.com/group/hackerspace_brisbane?hl=en.
>> --
>> You received this message because you are subscribed to the Google Groups
>> "hackerspace_brisbane" group.
>> To post to this group, send email to
>> hackerspace_brisbane@googlegroups.com.
>> To unsubscribe from this group, send email to
>> hackerspace_brisbane+unsubscribe@googlegroups.com.
>> For more options, visit this group at
>> http://groups.google.com/group/hackerspace_brisbane?hl=en.
>> --
>> You received this message because you are subscribed to the Google Groups
>> "hackerspace_brisbane" group.
>> To post to this group, send email to
>> hackerspace_brisbane@googlegroups.com.
>> To unsubscribe from this group, send email to
>> hackerspace_brisbane+unsubscribe@googlegroups.com.
>> For more options, visit this group at
>> http://groups.google.com/group/hackerspace_brisbane?hl=en.
>> --
>> You received this message because you are subscribed to the Google Groups
>> "hackerspace_brisbane" group.
>> To post to this group, send email to
>> hackerspace_brisbane@googlegroups.com.
>> To unsubscribe from this group, send email to
>> hackerspace_brisbane+unsubscribe@googlegroups.com.
>> For more options, visit this group at
>> http://groups.google.com/group/hackerspace_brisbane?hl=en.
>> --
>> You received this message because you are subscribed to the Google Groups
>> "hackerspace_brisbane" group.
>> To post to this group, send email to
>> hackerspace_brisbane@googlegroups.com.
>> To unsubscribe from this group, send email to
>> hackerspace_brisbane+unsubscribe@googlegroups.com.
>> For more options, visit this group at
>> http://groups.google.com/group/hackerspace_brisbane?hl=en.
>> --
>> You received this message because you are subscribed to the Google Groups
>> "hackerspace_brisbane" group.
>> To post to this group, send email to
>> hackerspace_brisbane@googlegroups.com.
>> To unsubscribe from this group, send email to
>> hackerspace_brisbane+unsubscribe@googlegroups.com.
>> For more options, visit this group at
>> http://groups.google.com/group/hackerspace_brisbane?hl=en.
>> --
>> You received this message because you are subscribed to the Google Groups
>> "hackerspace_brisbane" group.
>> To post to this group, send email to
>> hackerspace_brisbane@googlegroups.com.
>> To unsubscribe from this group, send email to
>> hackerspace_brisbane+unsubscribe@googlegroups.com.
>> For more options, visit this group at
>> http://groups.google.com/group/hackerspace_brisbane?hl=en.
>> --
>> You received this message because you are subscribed to the Google Groups
>> "hackerspace_brisbane" group.
>> To post to this group, send email to
>> hackerspace_brisbane@googlegroups.com.
>> To unsubscribe from this group, send email to
>> hackerspace_brisbane+unsubscribe@googlegroups.com.
>> For more options, visit this group at
>> http://groups.google.com/group/hackerspace_brisbane?hl=en.
> --
> You received this message because you are subscribed to the Google Groups
> "hackerspace_brisbane" group.
> To post to this group, send email to hackerspace_brisbane@googlegroups.com
> .
> To unsubscribe from this group, send email to
> hackerspace_brisbane+unsubscribe@googlegroups.com.
> For more options, visit this group at
> http://groups.google.com/group/hackerspace_brisbane?hl=en.
> On Sun, Sep 23, 2012 at 6:09 PM, James Churchill <pel...@gmail.com> wrote:
>> But if you've got a knipex you don't wanna risk damaging it by trying
>> that, anyway :)
>> (I've used them, they're really superb tools.)
>> - James
>> On 23 September 2012 17:45, Joshua Hogendorn <jhogend...@gmail.com>wrote:
>>> I bought some very strong strings from bunnings and cut them to size
>>> with a dremel. (never use anything else for springs, with the possible
>>> exception of some knipex cutters which will do things like piano wire)
>>> --
>>> Joshua Hogendorn
>>> PH: 0407710007
>>> On Sunday, 23 September 2012 at 4:12 PM, Triffid Hunter wrote:
>>> If you want some quality prints, I can do some.. you'll have to pay
>>> postage as well though, I'm down in northern NSW!
>>> On Sun, Sep 23, 2012 at 3:07 PM, Pamela Hauff <hauff.geor...@gmail.com>wrote:
>>> Hi Yes
>>> Thanks Joshua and Luke.
>>> I can come to the space on Tuesday but I am penniless till Thursday. Be
>>> happy to work something out though.
>>> I understand about printing quality my parts were not so good either.
>>> Cheers
>>> Pam
>>> On Sun, Sep 23, 2012 at 3:01 PM, Joshua Hogendorn <jhogend...@gmail.com>wrote:
>>> My printer is at the space currently, happy to print you whatever you
>>> need :)
>>> On 23/09/2012, at 14:57, Luke Hovington <lu...@hovo.id.au> wrote:
>>> Come into the space on Tuesday and Im sure someone would be willing to
>>> print many parts for you for a small fee..
>>> I would offer my parts but they are rather doge (my my standards) and my
>>> second printer has just arrive!! so im get to put it together.
>>> Most likely be doing that on Tuesday as well if you want to participate..
>>> Cheers
>>> On Sun, Sep 23, 2012 at 1:14 PM, Pamela Hauff <hauff.geor...@gmail.com>wrote:
>>> I am in Coorparoo.
>>> Awesome that you can help.
>>> Thanks
>>> On Sun, Sep 23, 2012 at 12:04 PM, chris bate <
>>> thejollygrimrea...@gmail.com> wrote:
>>> I've got a few sets of wades extruders here with both the
>>> herringbonegears and the normal gears where abouts are you
>>> On Sun, Sep 23, 2012 at 10:18 AM, Pamela Hauff <hauff.geor...@gmail.com>wrote:
>>> It used a small 8 tooth gear which was destined to break but I didn't
>>> notice until too late.
>>> Now I want to switch to a wades extruder.
>>> Can anybody help me by printing a good quality set?
>>> Willing to pay a reasonable price for the parts.
>>> If you have a hobbled bolt too that would be good.
>>> Thank You
>>> Pam
>>> --
>>> You received this message because you are subscribed to the Google
>>> Groups "hackerspace_brisbane" group.
>>> To view this discussion on the web visit
>>> https://groups.google.com/d/msg/hackerspace_brisbane/-/Gp3BrARZVaoJ.
>>> To post to this group, send email to
>>> hackerspace_brisbane@googlegroups.com.
>>> To unsubscribe from this group, send email to
>>> hackerspace_brisbane+unsubscribe@googlegroups.com.
>>> For more options, visit this group at
>>> http://groups.google.com/group/hackerspace_brisbane?hl=en.
>>> --
>>> You received this message because you are subscribed to the Google
>>> Groups "hackerspace_brisbane" group.
>>> To post to this group, send email to
>>> hackerspace_brisbane@googlegroups.com.
>>> To unsubscribe from this group, send email to
>>> hackerspace_brisbane+unsubscribe@googlegroups.com.
>>> For more options, visit this group at
>>> http://groups.google.com/group/hackerspace_brisbane?hl=en.
>>> --
>>> You received this message because you are subscribed to the Google
>>> Groups "hackerspace_brisbane" group.
>>> To post to this group, send email to
>>> hackerspace_brisbane@googlegroups.com.
>>> To unsubscribe from this group, send email to
>>> hackerspace_brisbane+unsubscribe@googlegroups.com.
>>> For more options, visit this group at
>>> http://groups.google.com/group/hackerspace_brisbane?hl=en.
>>> --
>>> You received this message because you are subscribed to the Google
>>> Groups "hackerspace_brisbane" group.
>>> To post to this group, send email to
>>> hackerspace_brisbane@googlegroups.com.
>>> To unsubscribe from this group, send email to
>>> hackerspace_brisbane+unsubscribe@googlegroups.com.
>>> For more options, visit this group at
>>> http://groups.google.com/group/hackerspace_brisbane?hl=en.
>>> --
>>> You received this message because you are subscribed to the Google
>>> Groups "hackerspace_brisbane" group.
>>> To post to this group, send email to
>>> hackerspace_brisbane@googlegroups.com.
>>> To unsubscribe from this group, send email to
>>> hackerspace_brisbane+unsubscribe@googlegroups.com.
>>> For more options, visit this group at
>>> http://groups.google.com/group/hackerspace_brisbane?hl=en.
>>> --
>>> You received this message because you are subscribed to the Google
>>> Groups "hackerspace_brisbane" group.
>>> To post to this group, send email to
>>> hackerspace_brisbane@googlegroups.com.
>>> To unsubscribe from this group, send email to
>>> hackerspace_brisbane+unsubscribe@googlegroups.com.
>>> For more options, visit this group at
>>> http://groups.google.com/group/hackerspace_brisbane?hl=en.
>>> --
>>> You received this message because you are subscribed to the Google
>>> Groups "hackerspace_brisbane" group.
>>> To post to this group, send email to
>>> hackerspace_brisbane@googlegroups.com.
>>> To unsubscribe from this group, send email to
>>> hackerspace_brisbane+unsubscribe@googlegroups.com.
>>> For more options, visit this group at
>>> http://groups.google.com/group/hackerspace_brisbane?hl=en.
>>> --
>>> You received this message because you are subscribed to the Google
>>> Groups "hackerspace_brisbane" group.
>>> To post to this group, send email to
>>> hackerspace_brisbane@googlegroups.com.
>>> To unsubscribe from this group, send email to
>>> hackerspace_brisbane+unsubscribe@googlegroups.com.
>>> For more options, visit this group at
>>> http://groups.google.com/group/hackerspace_brisbane?hl=en.
>> --
>> You received this message because you are subscribed to the Google Groups
>> "hackerspace_brisbane" group.
>> To post to this group, send email to
>> hackerspace_brisbane@googlegroups.com.
>> To unsubscribe from this group, send email to
>> hackerspace_brisbane+unsubscribe@googlegroups.com.
>> For more options, visit this group at
>> http://groups.google.com/group/hackerspace_brisbane?hl=en.
> --
> You received this message because you are subscribed to the Google Groups
> "hackerspace_brisbane" group.
> To post to this group, send email to hackerspace_brisbane@googlegroups.com
> .
> To unsubscribe from this group, send email to
> hackerspace_brisbane+unsubscribe@googlegroups.com.
> For more options, visit this group at
> http://groups.google.com/group/hackerspace_brisbane?hl=en.
i used to just use 4 spring washers and some nyloc nuts,
the spring washers can ride the variance in the filament diameter since
we've only talking less than 1mm anyway
I did find though that only two washers were needed depending on the
filament
On Sun, Sep 23, 2012 at 6:42 PM, Pamela Hauff <hauff.geor...@gmail.com>wrote:
> On Sun, Sep 23, 2012 at 6:33 PM, chris bate <thejollygrimrea...@gmail.com>wrote:
>> what size filament are you using?
>> On Sun, Sep 23, 2012 at 6:09 PM, James Churchill <pel...@gmail.com>wrote:
>>> But if you've got a knipex you don't wanna risk damaging it by trying
>>> that, anyway :)
>>> (I've used them, they're really superb tools.)
>>> - James
>>> On 23 September 2012 17:45, Joshua Hogendorn <jhogend...@gmail.com>wrote:
>>>> I bought some very strong strings from bunnings and cut them to size
>>>> with a dremel. (never use anything else for springs, with the possible
>>>> exception of some knipex cutters which will do things like piano wire)
>>>> --
>>>> Joshua Hogendorn
>>>> PH: 0407710007
>>>> On Sunday, 23 September 2012 at 4:12 PM, Triffid Hunter wrote:
>>>> If you want some quality prints, I can do some.. you'll have to pay
>>>> postage as well though, I'm down in northern NSW!
>>>> On Sun, Sep 23, 2012 at 3:07 PM, Pamela Hauff <hauff.geor...@gmail.com>wrote:
>>>> Hi Yes
>>>> Thanks Joshua and Luke.
>>>> I can come to the space on Tuesday but I am penniless till Thursday.
>>>> Be happy to work something out though.
>>>> I understand about printing quality my parts were not so good either.
>>>> Cheers
>>>> Pam
>>>> On Sun, Sep 23, 2012 at 3:01 PM, Joshua Hogendorn <jhogend...@gmail.com
>>>> > wrote:
>>>> My printer is at the space currently, happy to print you whatever you
>>>> need :)
>>>> On 23/09/2012, at 14:57, Luke Hovington <lu...@hovo.id.au> wrote:
>>>> Come into the space on Tuesday and Im sure someone would be willing to
>>>> print many parts for you for a small fee..
>>>> I would offer my parts but they are rather doge (my my standards) and
>>>> my second printer has just arrive!! so im get to put it together.
>>>> Most likely be doing that on Tuesday as well if you want to
>>>> participate..
>>>> Cheers
>>>> On Sun, Sep 23, 2012 at 1:14 PM, Pamela Hauff <hauff.geor...@gmail.com>wrote:
>>>> I am in Coorparoo.
>>>> Awesome that you can help.
>>>> Thanks
>>>> On Sun, Sep 23, 2012 at 12:04 PM, chris bate <
>>>> thejollygrimrea...@gmail.com> wrote:
>>>> I've got a few sets of wades extruders here with both the
>>>> herringbonegears and the normal gears where abouts are you
>>>> On Sun, Sep 23, 2012 at 10:18 AM, Pamela Hauff <hauff.geor...@gmail.com
>>>> > wrote:
>>>> It used a small 8 tooth gear which was destined to break but I didn't
>>>> notice until too late.
>>>> Now I want to switch to a wades extruder.
>>>> Can anybody help me by printing a good quality set?
>>>> Willing to pay a reasonable price for the parts.
>>>> If you have a hobbled bolt too that would be good.
>>>> Thank You
>>>> Pam
>>>> --
>>>> You received this message because you are subscribed to the Google
>>>> Groups "hackerspace_brisbane" group.
>>>> To view this discussion on the web visit
>>>> https://groups.google.com/d/msg/hackerspace_brisbane/-/Gp3BrARZVaoJ.
>>>> To post to this group, send email to
>>>> hackerspace_brisbane@googlegroups.com.
>>>> To unsubscribe from this group, send email to
>>>> hackerspace_brisbane+unsubscribe@googlegroups.com.
>>>> For more options, visit this group at
>>>> http://groups.google.com/group/hackerspace_brisbane?hl=en.
>>>> --
>>>> You received this message because you are subscribed to the Google
>>>> Groups "hackerspace_brisbane" group.
>>>> To post to this group, send email to
>>>> hackerspace_brisbane@googlegroups.com.
>>>> To unsubscribe from this group, send email to
>>>> hackerspace_brisbane+unsubscribe@googlegroups.com.
>>>> For more options, visit this group at
>>>> http://groups.google.com/group/hackerspace_brisbane?hl=en.
>>>> --
>>>> You received this message because you are subscribed to the Google
>>>> Groups "hackerspace_brisbane" group.
>>>> To post to this group, send email to
>>>> hackerspace_brisbane@googlegroups.com.
>>>> To unsubscribe from this group, send email to
>>>> hackerspace_brisbane+unsubscribe@googlegroups.com.
>>>> For more options, visit this group at
>>>> http://groups.google.com/group/hackerspace_brisbane?hl=en.
>>>> --
>>>> You received this message because you are subscribed to the Google
>>>> Groups "hackerspace_brisbane" group.
>>>> To post to this group, send email to
>>>> hackerspace_brisbane@googlegroups.com.
>>>> To unsubscribe from this group, send email to
>>>> hackerspace_brisbane+unsubscribe@googlegroups.com.
>>>> For more options, visit this group at
>>>> http://groups.google.com/group/hackerspace_brisbane?hl=en.
>>>> --
>>>> You received this message because you are subscribed to the Google
>>>> Groups "hackerspace_brisbane" group.
>>>> To post to this group, send email to
>>>> hackerspace_brisbane@googlegroups.com.
>>>> To unsubscribe from this group, send email to
>>>> hackerspace_brisbane+unsubscribe@googlegroups.com.
>>>> For more options, visit this group at
>>>> http://groups.google.com/group/hackerspace_brisbane?hl=en.
>>>> --
>>>> You received this message because you are subscribed to the Google
>>>> Groups "hackerspace_brisbane" group.
>>>> To post to this group, send email to
>>>> hackerspace_brisbane@googlegroups.com.
>>>> To unsubscribe from this group, send email to
>>>> hackerspace_brisbane+unsubscribe@googlegroups.com.
>>>> For more options, visit this group at
>>>> http://groups.google.com/group/hackerspace_brisbane?hl=en.
>>>> --
>>>> You received this message because you are subscribed to the Google
>>>> Groups "hackerspace_brisbane" group.
>>>> To post to this group, send email to
>>>> hackerspace_brisbane@googlegroups.com.
>>>> To unsubscribe from this group, send email to
>>>> hackerspace_brisbane+unsubscribe@googlegroups.com.
>>>> For more options, visit this group at
>>>> http://groups.google.com/group/hackerspace_brisbane?hl=en.
>>>> --
>>>> You received this message because you are subscribed to the Google
>>>> Groups "hackerspace_brisbane" group.
>>>> To post to this group, send email to
>>>> hackerspace_brisbane@googlegroups.com.
>>>> To unsubscribe from this group, send email to
>>>> hackerspace_brisbane+unsubscribe@googlegroups.com.
>>>> For more options, visit this group at
>>>> http://groups.google.com/group/hackerspace_brisbane?hl=en.
>>> --
>>> You received this message because you are subscribed to the Google
>>> Groups "hackerspace_brisbane" group.
>>> To post to this group, send email to
>>> hackerspace_brisbane@googlegroups.com.
>>> To unsubscribe from this group, send email to
>>> hackerspace_brisbane+unsubscribe@googlegroups.com.
>>> For more options, visit this group at
>>> http://groups.google.com/group/hackerspace_brisbane?hl=en.
>> --
>> You received this message because you are subscribed to the Google Groups
>> "hackerspace_brisbane" group.
>> To post to this group, send email to
>> hackerspace_brisbane@googlegroups.com.
>> To unsubscribe from this group, send email to
>> hackerspace_brisbane+unsubscribe@googlegroups.com.
>> For more options, visit this group at
>> http://groups.google.com/group/hackerspace_brisbane?hl=en.
> --
> You received this message because you are subscribed to the Google Groups
> "hackerspace_brisbane" group.
> To post to this group, send email to hackerspace_brisbane@googlegroups.com
> .
> To unsubscribe from this group, send email to
> hackerspace_brisbane+unsubscribe@googlegroups.com.
> For more options, visit this group at
> http://groups.google.com/group/hackerspace_brisbane?hl=en.
> i used to just use 4 spring washers and some nyloc nuts,
> the spring washers can ride the variance in the filament diameter since
> we've only talking less than 1mm anyway
> I did find though that only two washers were needed depending on the
> filament
> On Sun, Sep 23, 2012 at 6:42 PM, Pamela Hauff <hauff.geor...@gmail.com>wrote:
>> Hi Chris,
>> I am using 3mm ABS filament.
>> Pam
>> On Sun, Sep 23, 2012 at 6:33 PM, chris bate <thejollygrimrea...@gmail.com
>> > wrote:
>>> what size filament are you using?
>>> On Sun, Sep 23, 2012 at 6:09 PM, James Churchill <pel...@gmail.com>wrote:
>>>> But if you've got a knipex you don't wanna risk damaging it by trying
>>>> that, anyway :)
>>>> (I've used them, they're really superb tools.)
>>>> - James
>>>> On 23 September 2012 17:45, Joshua Hogendorn <jhogend...@gmail.com>wrote:
>>>>> I bought some very strong strings from bunnings and cut them to size
>>>>> with a dremel. (never use anything else for springs, with the possible
>>>>> exception of some knipex cutters which will do things like piano wire)
>>>>> On Sun, Sep 23, 2012 at 3:07 PM, Pamela Hauff <hauff.geor...@gmail.com
>>>>> > wrote:
>>>>> Hi Yes
>>>>> Thanks Joshua and Luke.
>>>>> I can come to the space on Tuesday but I am penniless till Thursday.
>>>>> Be happy to work something out though.
>>>>> I understand about printing quality my parts were not so good either.
>>>>> Cheers
>>>>> Pam
>>>>> On Sun, Sep 23, 2012 at 3:01 PM, Joshua Hogendorn <
>>>>> jhogend...@gmail.com> wrote:
>>>>> My printer is at the space currently, happy to print you whatever you
>>>>> need :)
>>>>> On 23/09/2012, at 14:57, Luke Hovington <lu...@hovo.id.au> wrote:
>>>>> Come into the space on Tuesday and Im sure someone would be willing to
>>>>> print many parts for you for a small fee..
>>>>> I would offer my parts but they are rather doge (my my standards) and
>>>>> my second printer has just arrive!! so im get to put it together.
>>>>> Most likely be doing that on Tuesday as well if you want to
>>>>> participate..
>>>>> Cheers
>>>>> On Sun, Sep 23, 2012 at 1:14 PM, Pamela Hauff <hauff.geor...@gmail.com
>>>>> > wrote:
>>>>> I am in Coorparoo.
>>>>> Awesome that you can help.
>>>>> Thanks
>>>>> On Sun, Sep 23, 2012 at 12:04 PM, chris bate <
>>>>> thejollygrimrea...@gmail.com> wrote:
>>>>> I've got a few sets of wades extruders here with both the
>>>>> herringbonegears and the normal gears where abouts are you
>>>>> On Sun, Sep 23, 2012 at 10:18 AM, Pamela Hauff <
>>>>> hauff.geor...@gmail.com> wrote:
>>>>> Hi All,
>>>>> My prusa mendel extruder broke!
>>>>> It used a small 8 tooth gear which was destined to break but I didn't
>>>>> notice until too late.
>>>>> Now I want to switch to a wades extruder.
>>>>> Can anybody help me by printing a good quality set?
>>>>> Willing to pay a reasonable price for the parts.
>>>>> If you have a hobbled bolt too that would be good.
>>>>> Thank You
>>>>> Pam
>>>>> --
>>>>> You received this message because you are subscribed to the Google
>>>>> Groups "hackerspace_brisbane" group.
>>>>> To view this discussion on the web visit
>>>>> https://groups.google.com/d/msg/hackerspace_brisbane/-/Gp3BrARZVaoJ.
>>>>> To post to this group, send email to
>>>>> hackerspace_brisbane@googlegroups.com.
>>>>> To unsubscribe from this group, send email to
>>>>> hackerspace_brisbane+unsubscribe@googlegroups.com.
>>>>> For more options, visit this group at
>>>>> http://groups.google.com/group/hackerspace_brisbane?hl=en.
>>>>> --
>>>>> You received this message because you are subscribed to the Google
>>>>> Groups "hackerspace_brisbane" group.
>>>>> To post to this group, send email to
>>>>> hackerspace_brisbane@googlegroups.com.
>>>>> To unsubscribe from this group, send email to
>>>>> hackerspace_brisbane+unsubscribe@googlegroups.com.
>>>>> For more options, visit this group at
>>>>> http://groups.google.com/group/hackerspace_brisbane?hl=en.
>>>>> --
>>>>> You received this message because you are subscribed to the Google
>>>>> Groups "hackerspace_brisbane" group.
>>>>> To post to this group, send email to
>>>>> hackerspace_brisbane@googlegroups.com.
>>>>> To unsubscribe from this group, send email to
>>>>> hackerspace_brisbane+unsubscribe@googlegroups.com.
>>>>> For more options, visit this group at
>>>>> http://groups.google.com/group/hackerspace_brisbane?hl=en.
>>>>> --
>>>>> You received this message because you are subscribed to the Google
>>>>> Groups "hackerspace_brisbane" group.
>>>>> To post to this group, send email to
>>>>> hackerspace_brisbane@googlegroups.com.
>>>>> To unsubscribe from this group, send email to
>>>>> hackerspace_brisbane+unsubscribe@googlegroups.com.
>>>>> For more options, visit this group at
>>>>> http://groups.google.com/group/hackerspace_brisbane?hl=en.
>>>>> --
>>>>> You received this message because you are subscribed to the Google
>>>>> Groups "hackerspace_brisbane" group.
>>>>> To post to this group, send email to
>>>>> hackerspace_brisbane@googlegroups.com.
>>>>> To unsubscribe from this group, send email to
>>>>> hackerspace_brisbane+unsubscribe@googlegroups.com.
>>>>> For more options, visit this group at
>>>>> http://groups.google.com/group/hackerspace_brisbane?hl=en.
>>>>> --
>>>>> You received this message because you are subscribed to the Google
>>>>> Groups "hackerspace_brisbane" group.
>>>>> To post to this group, send email to
>>>>> hackerspace_brisbane@googlegroups.com.
>>>>> To unsubscribe from this group, send email to
>>>>> hackerspace_brisbane+unsubscribe@googlegroups.com.
>>>>> For more options, visit this group at
>>>>> http://groups.google.com/group/hackerspace_brisbane?hl=en.
>>>>> --
>>>>> You received this message because you are subscribed to the Google
>>>>> Groups "hackerspace_brisbane" group.
>>>>> To post to this group, send email to
>>>>> hackerspace_brisbane@googlegroups.com.
>>>>> To unsubscribe from this group, send email to
>>>>> hackerspace_brisbane+unsubscribe@googlegroups.com.
>>>>> For more options, visit this group at
>>>>> http://groups.google.com/group/hackerspace_brisbane?hl=en.
>>>>> --
>>>>> You received this message because you are subscribed to the Google
>>>>> Groups "hackerspace_brisbane" group.
>>>>> To post to this group, send email to
>>>>> hackerspace_brisbane@googlegroups.com.
>>>>> To unsubscribe from this group, send email to
>>>>> hackerspace_brisbane+unsubscribe@googlegroups.com.
>>>>> For more options, visit this group at
>>>>> http://groups.google.com/group/hackerspace_brisbane?hl=en.
>>>> --
>>>> You received this message because you are subscribed to the Google
>>>> Groups "hackerspace_brisbane" group.
>>>> To post to this group, send email to
>>>> hackerspace_brisbane@googlegroups.com.
>>>> To unsubscribe from this group, send email to
>>>> hackerspace_brisbane+unsubscribe@googlegroups.com.
>>>> For more options, visit this group at
>>>> http://groups.google.com/group/hackerspace_brisbane?hl=en.
>>> --
>>> You received this message because you are subscribed to the Google
>>> Groups "hackerspace_brisbane" group.
>>> To post to this group, send email to
>>> hackerspace_brisbane@googlegroups.com.
>>> To unsubscribe from this group, send email to
>>> hackerspace_brisbane+unsubscribe@googlegroups.com.
>>> For more options, visit this group at
>>> http://groups.google.com/group/hackerspace_brisbane?hl=en.
>> --
>> You received this message because you are subscribed to the Google Groups
>> "hackerspace_brisbane" group.
>> To post to this group, send email to
>> hackerspace_brisbane@googlegroups.com.
>> To unsubscribe from this group, send email to
>> hackerspace_brisbane+unsubscribe@googlegroups.com.
>> For more options, visit this group at
>> http://groups.google.com/group/hackerspace_brisbane?hl=en.
> --
> You received this message because you are subscribed to the Google Groups
> "hackerspace_brisbane" group.
> To post to this group, send email to hackerspace_brisbane@googlegroups.com
> .
> To unsubscribe from this group, send email to
> hackerspace_brisbane+unsubscribe@googlegroups.com.
> For more options, visit this group at
> http://groups.google.com/group/hackerspace_brisbane?hl=en.
at one point i was only using 1 but i'd recommend using all 4 in 3mm
filament, if anything 4 might be overkill, in which case all that needs to
happen is you jut back one off,
stickly speaking if the filament is really really good and consistant, you
can get away with and in some cases have even more reliable extrusion with
no washers at all,
and just rely on the nyloc nuts, it been a while since i've used 3mm
filament,
i currently use a 1.75 direct drive extruder with a jhead which is geared
more for fine detailed printing as opposed to the brute force of the wades,
On Sun, Sep 23, 2012 at 7:13 PM, Pamela Hauff <hauff.geor...@gmail.com>wrote:
> So you think that the spring washers can apply the required force.
> That would save the hassle using compression springs.
> Great idea...
> Thanks
> On Sun, Sep 23, 2012 at 6:51 PM, chris bate <thejollygrimrea...@gmail.com>wrote:
>> i used to just use 4 spring washers and some nyloc nuts,
>> the spring washers can ride the variance in the filament diameter since
>> we've only talking less than 1mm anyway
>> I did find though that only two washers were needed depending on the
>> filament
>> On Sun, Sep 23, 2012 at 6:42 PM, Pamela Hauff <hauff.geor...@gmail.com>wrote:
>>> Hi Chris,
>>> I am using 3mm ABS filament.
>>> Pam
>>> On Sun, Sep 23, 2012 at 6:33 PM, chris bate <
>>> thejollygrimrea...@gmail.com> wrote:
>>>> what size filament are you using?
>>>> On Sun, Sep 23, 2012 at 6:09 PM, James Churchill <pel...@gmail.com>wrote:
>>>>> But if you've got a knipex you don't wanna risk damaging it by trying
>>>>> that, anyway :)
>>>>> (I've used them, they're really superb tools.)
>>>>> - James
>>>>> On 23 September 2012 17:45, Joshua Hogendorn <jhogend...@gmail.com>wrote:
>>>>>> I bought some very strong strings from bunnings and cut them to
>>>>>> size with a dremel. (never use anything else for springs, with the possible
>>>>>> exception of some knipex cutters which will do things like piano wire)
>>>>>> On Sun, Sep 23, 2012 at 3:07 PM, Pamela Hauff <
>>>>>> hauff.geor...@gmail.com> wrote:
>>>>>> Hi Yes
>>>>>> Thanks Joshua and Luke.
>>>>>> I can come to the space on Tuesday but I am penniless till Thursday.
>>>>>> Be happy to work something out though.
>>>>>> I understand about printing quality my parts were not so good either.
>>>>>> Cheers
>>>>>> Pam
>>>>>> On Sun, Sep 23, 2012 at 3:01 PM, Joshua Hogendorn <
>>>>>> jhogend...@gmail.com> wrote:
>>>>>> My printer is at the space currently, happy to print you whatever you
>>>>>> need :)
>>>>>> On 23/09/2012, at 14:57, Luke Hovington <lu...@hovo.id.au> wrote:
>>>>>> Come into the space on Tuesday and Im sure someone would be willing
>>>>>> to print many parts for you for a small fee..
>>>>>> I would offer my parts but they are rather doge (my my standards) and
>>>>>> my second printer has just arrive!! so im get to put it together.
>>>>>> Most likely be doing that on Tuesday as well if you want to
>>>>>> participate..
>>>>>> Cheers
>>>>>> On Sun, Sep 23, 2012 at 1:14 PM, Pamela Hauff <
>>>>>> hauff.geor...@gmail.com> wrote:
>>>>>> I am in Coorparoo.
>>>>>> Awesome that you can help.
>>>>>> Thanks
>>>>>> On Sun, Sep 23, 2012 at 12:04 PM, chris bate <
>>>>>> thejollygrimrea...@gmail.com> wrote:
>>>>>> I've got a few sets of wades extruders here with both the
>>>>>> herringbonegears and the normal gears where abouts are you
>>>>>> On Sun, Sep 23, 2012 at 10:18 AM, Pamela Hauff <
>>>>>> hauff.geor...@gmail.com> wrote:
>>>>>> Hi All,
>>>>>> My prusa mendel extruder broke!
>>>>>> It used a small 8 tooth gear which was destined to break but I didn't
>>>>>> notice until too late.
>>>>>> Now I want to switch to a wades extruder.
>>>>>> Can anybody help me by printing a good quality set?
>>>>>> Willing to pay a reasonable price for the parts.
>>>>>> If you have a hobbled bolt too that would be good.
>>>>>> Thank You
>>>>>> Pam
>>>>>> --
>>>>>> You received this message because you are subscribed to the Google
>>>>>> Groups "hackerspace_brisbane" group.
>>>>>> To view this discussion on the web visit
>>>>>> https://groups.google.com/d/msg/hackerspace_brisbane/-/Gp3BrARZVaoJ.
>>>>>> To post to this group, send email to
>>>>>> hackerspace_brisbane@googlegroups.com.
>>>>>> To unsubscribe from this group, send email to
>>>>>> hackerspace_brisbane+unsubscribe@googlegroups.com.
>>>>>> For more options, visit this group at
>>>>>> http://groups.google.com/group/hackerspace_brisbane?hl=en.
>>>>>> --
>>>>>> You received this message because you are subscribed to the Google
>>>>>> Groups "hackerspace_brisbane" group.
>>>>>> To post to this group, send email to
>>>>>> hackerspace_brisbane@googlegroups.com.
>>>>>> To unsubscribe from this group, send email to
>>>>>> hackerspace_brisbane+unsubscribe@googlegroups.com.
>>>>>> For more options, visit this group at
>>>>>> http://groups.google.com/group/hackerspace_brisbane?hl=en.
>>>>>> --
>>>>>> You received this message because you are subscribed to the Google
>>>>>> Groups "hackerspace_brisbane" group.
>>>>>> To post to this group, send email to
>>>>>> hackerspace_brisbane@googlegroups.com.
>>>>>> To unsubscribe from this group, send email to
>>>>>> hackerspace_brisbane+unsubscribe@googlegroups.com.
>>>>>> For more options, visit this group at
>>>>>> http://groups.google.com/group/hackerspace_brisbane?hl=en.
>>>>>> --
>>>>>> You received this message because you are subscribed to the Google
>>>>>> Groups "hackerspace_brisbane" group.
>>>>>> To post to this group, send email to
>>>>>> hackerspace_brisbane@googlegroups.com.
>>>>>> To unsubscribe from this group, send email to
>>>>>> hackerspace_brisbane+unsubscribe@googlegroups.com.
>>>>>> For more options, visit this group at
>>>>>> http://groups.google.com/group/hackerspace_brisbane?hl=en.
>>>>>> --
>>>>>> You received this message because you are subscribed to the Google
>>>>>> Groups "hackerspace_brisbane" group.
>>>>>> To post to this group, send email to
>>>>>> hackerspace_brisbane@googlegroups.com.
>>>>>> To unsubscribe from this group, send email to
>>>>>> hackerspace_brisbane+unsubscribe@googlegroups.com.
>>>>>> For more options, visit this group at
>>>>>> http://groups.google.com/group/hackerspace_brisbane?hl=en.
>>>>>> --
>>>>>> You received this message because you are subscribed to the Google
>>>>>> Groups "hackerspace_brisbane" group.
>>>>>> To post to this group, send email to
>>>>>> hackerspace_brisbane@googlegroups.com.
>>>>>> To unsubscribe from this group, send email to
>>>>>> hackerspace_brisbane+unsubscribe@googlegroups.com.
>>>>>> For more options, visit this group at
>>>>>> http://groups.google.com/group/hackerspace_brisbane?hl=en.
>>>>>> --
>>>>>> You received this message because you are subscribed to the Google
>>>>>> Groups "hackerspace_brisbane" group.
>>>>>> To post to this group, send email to
>>>>>> hackerspace_brisbane@googlegroups.com.
>>>>>> To unsubscribe from this group, send email to
>>>>>> hackerspace_brisbane+unsubscribe@googlegroups.com.
>>>>>> For more options, visit this group at
>>>>>> http://groups.google.com/group/hackerspace_brisbane?hl=en.
>>>>>> --
>>>>>> You received this message because you are subscribed to the Google
>>>>>> Groups "hackerspace_brisbane" group.
>>>>>> To post to this group, send email to
>>>>>> hackerspace_brisbane@googlegroups.com.
>>>>>> To unsubscribe from this group, send email to
>>>>>> hackerspace_brisbane+unsubscribe@googlegroups.com.
>>>>>> For more options, visit this group at
>>>>>> http://groups.google.com/group/hackerspace_brisbane?hl=en.
>>>>> --
>>>>> You received this message because you are subscribed to the Google
>>>>> Groups "hackerspace_brisbane" group.
>>>>> To post to this group, send email to
>>>>> hackerspace_brisbane@googlegroups.com.
>>>>> To unsubscribe from this group, send email to
>>>>> hackerspace_brisbane+unsubscribe@googlegroups.com.
>>>>> For more options, visit this group at
>>>>> http://groups.google.com/group/hackerspace_brisbane?hl=en.
>>>> --
>>>> You received this message because you are subscribed to the Google
>>>> Groups "hackerspace_brisbane" group.
>>>> To post to this group, send email to
>>>> hackerspace_brisbane@googlegroups.com.
>>>> To unsubscribe from this group, send email to
>>>> hackerspace_brisbane+unsubscribe@googlegroups.com.
>>>> For more options, visit this group at
>>>> http://groups.google.com/group/hackerspace_brisbane?hl=en.
>>> --
>>> You received this message because you are subscribed to the Google
>>> Groups "hackerspace_brisbane" group.
>>> To post to this group, send email to
>>> hackerspace_brisbane@googlegroups.com.
>>> To unsubscribe from this group, send email to
Its a good idea to use 4. I like the direct drive but that's really only
for 1.75mm filament. I might switch to that later once I get better at
Repraps.
Chris you have some spare wades extruder parts. I saw on ebay a set for
$15. Do you have a hobbled bolt or any of the other parts. I also noticed
that
ebay sells a complete wade extruder for $40.
I'll be able to buy after wednesday if your interested.
Cheers
Pam
On Sun, Sep 23, 2012 at 7:57 PM, chris bate <thejollygrimrea...@gmail.com>wrote:
> at one point i was only using 1 but i'd recommend using all 4 in 3mm
> filament, if anything 4 might be overkill, in which case all that needs to
> happen is you jut back one off,
> stickly speaking if the filament is really really good and consistant, you
> can get away with and in some cases have even more reliable extrusion with
> no washers at all,
> and just rely on the nyloc nuts, it been a while since i've used 3mm
> filament,
> i currently use a 1.75 direct drive extruder with a jhead which is geared
> more for fine detailed printing as opposed to the brute force of the wades,
> On Sun, Sep 23, 2012 at 7:13 PM, Pamela Hauff <hauff.geor...@gmail.com>wrote:
>> Hi Chris,
>> So you think that the spring washers can apply the required force.
>> That would save the hassle using compression springs.
>> Great idea...
>> Thanks
>> On Sun, Sep 23, 2012 at 6:51 PM, chris bate <thejollygrimrea...@gmail.com
>> > wrote:
>>> i used to just use 4 spring washers and some nyloc nuts,
>>> the spring washers can ride the variance in the filament diameter since
>>> we've only talking less than 1mm anyway
>>> I did find though that only two washers were needed depending on the
>>> filament
>>> On Sun, Sep 23, 2012 at 6:42 PM, Pamela Hauff <hauff.geor...@gmail.com>wrote:
>>>> Hi Chris,
>>>> I am using 3mm ABS filament.
>>>> Pam
>>>> On Sun, Sep 23, 2012 at 6:33 PM, chris bate <
>>>> thejollygrimrea...@gmail.com> wrote:
>>>>> what size filament are you using?
>>>>> On Sun, Sep 23, 2012 at 6:09 PM, James Churchill <pel...@gmail.com>wrote:
>>>>>> But if you've got a knipex you don't wanna risk damaging it by trying
>>>>>> that, anyway :)
>>>>>> (I've used them, they're really superb tools.)
>>>>>> - James
>>>>>> On 23 September 2012 17:45, Joshua Hogendorn <jhogend...@gmail.com>wrote:
>>>>>>> I bought some very strong strings from bunnings and cut them to
>>>>>>> size with a dremel. (never use anything else for springs, with the possible
>>>>>>> exception of some knipex cutters which will do things like piano wire)
>>>>>>> On Sun, Sep 23, 2012 at 3:07 PM, Pamela Hauff <
>>>>>>> hauff.geor...@gmail.com> wrote:
>>>>>>> Hi Yes
>>>>>>> Thanks Joshua and Luke.
>>>>>>> I can come to the space on Tuesday but I am penniless till
>>>>>>> Thursday. Be happy to work something out though.
>>>>>>> I understand about printing quality my parts were not so good either.
>>>>>>> Cheers
>>>>>>> Pam
>>>>>>> On Sun, Sep 23, 2012 at 3:01 PM, Joshua Hogendorn <
>>>>>>> jhogend...@gmail.com> wrote:
>>>>>>> My printer is at the space currently, happy to print you whatever
>>>>>>> you need :)
>>>>>>> On 23/09/2012, at 14:57, Luke Hovington <lu...@hovo.id.au> wrote:
>>>>>>> Come into the space on Tuesday and Im sure someone would be willing
>>>>>>> to print many parts for you for a small fee..
>>>>>>> I would offer my parts but they are rather doge (my my standards)
>>>>>>> and my second printer has just arrive!! so im get to put it together.
>>>>>>> Most likely be doing that on Tuesday as well if you want to
>>>>>>> participate..
>>>>>>> Cheers
>>>>>>> On Sun, Sep 23, 2012 at 1:14 PM, Pamela Hauff <
>>>>>>> hauff.geor...@gmail.com> wrote:
>>>>>>> I am in Coorparoo.
>>>>>>> Awesome that you can help.
>>>>>>> Thanks
>>>>>>> On Sun, Sep 23, 2012 at 12:04 PM, chris bate <
>>>>>>> thejollygrimrea...@gmail.com> wrote:
>>>>>>> I've got a few sets of wades extruders here with both the
>>>>>>> herringbonegears and the normal gears where abouts are you
>>>>>>> On Sun, Sep 23, 2012 at 10:18 AM, Pamela Hauff <
>>>>>>> hauff.geor...@gmail.com> wrote:
>>>>>>> Hi All,
>>>>>>> My prusa mendel extruder broke!
>>>>>>> It used a small 8 tooth gear which was destined to break but I
>>>>>>> didn't notice until too late.
>>>>>>> Now I want to switch to a wades extruder.
>>>>>>> Can anybody help me by printing a good quality set?
>>>>>>> Willing to pay a reasonable price for the parts.
>>>>>>> If you have a hobbled bolt too that would be good.
>>>>>>> Thank You
>>>>>>> Pam
>>>>>>> --
>>>>>>> You received this message because you are subscribed to the Google
>>>>>>> Groups "hackerspace_brisbane" group.
>>>>>>> To view this discussion on the web visit
>>>>>>> https://groups.google.com/d/msg/hackerspace_brisbane/-/Gp3BrARZVaoJ.
>>>>>>> To post to this group, send email to
>>>>>>> hackerspace_brisbane@googlegroups.com.
>>>>>>> To unsubscribe from this group, send email to
>>>>>>> hackerspace_brisbane+unsubscribe@googlegroups.com.
>>>>>>> For more options, visit this group at
>>>>>>> http://groups.google.com/group/hackerspace_brisbane?hl=en.
>>>>>>> --
>>>>>>> You received this message because you are subscribed to the Google
>>>>>>> Groups "hackerspace_brisbane" group.
>>>>>>> To post to this group, send email to
>>>>>>> hackerspace_brisbane@googlegroups.com.
>>>>>>> To unsubscribe from this group, send email to
>>>>>>> hackerspace_brisbane+unsubscribe@googlegroups.com.
>>>>>>> For more options, visit this group at
>>>>>>> http://groups.google.com/group/hackerspace_brisbane?hl=en.
>>>>>>> --
>>>>>>> You received this message because you are subscribed to the Google
>>>>>>> Groups "hackerspace_brisbane" group.
>>>>>>> To post to this group, send email to
>>>>>>> hackerspace_brisbane@googlegroups.com.
>>>>>>> To unsubscribe from this group, send email to
>>>>>>> hackerspace_brisbane+unsubscribe@googlegroups.com.
>>>>>>> For more options, visit this group at
>>>>>>> http://groups.google.com/group/hackerspace_brisbane?hl=en.
>>>>>>> --
>>>>>>> You received this message because you are subscribed to the Google
>>>>>>> Groups "hackerspace_brisbane" group.
>>>>>>> To post to this group, send email to
>>>>>>> hackerspace_brisbane@googlegroups.com.
>>>>>>> To unsubscribe from this group, send email to
>>>>>>> hackerspace_brisbane+unsubscribe@googlegroups.com.
>>>>>>> For more options, visit this group at
>>>>>>> http://groups.google.com/group/hackerspace_brisbane?hl=en.
>>>>>>> --
>>>>>>> You received this message because you are subscribed to the Google
>>>>>>> Groups "hackerspace_brisbane" group.
>>>>>>> To post to this group, send email to
>>>>>>> hackerspace_brisbane@googlegroups.com.
>>>>>>> To unsubscribe from this group, send email to
>>>>>>> hackerspace_brisbane+unsubscribe@googlegroups.com.
>>>>>>> For more options, visit this group at
>>>>>>> http://groups.google.com/group/hackerspace_brisbane?hl=en.
>>>>>>> --
>>>>>>> You received this message because you are subscribed to the Google
>>>>>>> Groups "hackerspace_brisbane" group.
>>>>>>> To post to this group, send email to
>>>>>>> hackerspace_brisbane@googlegroups.com.
>>>>>>> To unsubscribe from this group, send email to
>>>>>>> hackerspace_brisbane+unsubscribe@googlegroups.com.
>>>>>>> For more options, visit this group at
>>>>>>> http://groups.google.com/group/hackerspace_brisbane?hl=en.
>>>>>>> --
>>>>>>> You received this message because you are subscribed to the Google
>>>>>>> Groups "hackerspace_brisbane" group.
>>>>>>> To post to this group, send email to
>>>>>>> hackerspace_brisbane@googlegroups.com.
>>>>>>> To unsubscribe from this group, send email to
>>>>>>> hackerspace_brisbane+unsubscribe@googlegroups.com.
>>>>>>> For more options, visit this group at
>>>>>>> http://groups.google.com/group/hackerspace_brisbane?hl=en.
>>>>>>> --
>>>>>>> You received this message because you are subscribed to the Google
>>>>>>> Groups "hackerspace_brisbane" group.
>>>>>>> To post to this group, send email to
>>>>>>> hackerspace_brisbane@googlegroups.com.
>>>>>>> To unsubscribe from this group, send email to
>>>>>>> hackerspace_brisbane+unsubscribe@googlegroups.com.
>>>>>>> For more options, visit this group at
>>>>>>> http://groups.google.com/group/hackerspace_brisbane?hl=en.
>>>>>> --
>>>>>> You received this message because you are subscribed to the Google
>>>>>> Groups "hackerspace_brisbane" group.
>>>>>> To post to this group, send email to
>>>>>> hackerspace_brisbane@googlegroups.com.
>>>>>> To unsubscribe from this group, send email to
>>>>>> hackerspace_brisbane+unsubscribe@googlegroups.com.
>>>>>> For more options, visit this group
