Hi res hackerspace adl logo

[Matt Ziebarth]

Would someone be able to make me a high(er) resolution image of the hacker space logo? I don't have any graphics programs installed.
Preferably:
PNG or JPG formats preferred.
Black and white only.
With an integer aspect ratio (1:1, 3:2 etc)
I am interested to see the difference side by side to the low res image I engraved on the laser.
Cheers

[Tamsyn Michael]

This what you had in mind?

PS - Inkscape can output DXF files - which is (apparently?) the defacto standard for laser cutters.  Also does PNG if that's your bag.  :)

--
You received this message because you are subscribed to the Google Groups "HackerSpace - Adelaide, South Australia" group.
To post to this group, send email to hackerspac...@googlegroups.com.
To unsubscribe from this group, send email to hackerspace-adel...@googlegroups.com.
For more options, visit this group at http://groups.google.com/group/hackerspace-adelaide?hl=en.

[Matt Ziebarth]

Thanks. Could I be a pain and ask u to do another with the text below it? :-/

Yeah, I'll use DXF for vector cutting but I need a raster image for engraving. I'll have to give Inkscape a try. 

Thanks again!

<halogo.png>

[sighmon]

Here's a 600dpi version for you. :-)

http://hackadl.org/logo/hackerspace-adelaide-logo-600dpi.png

si.

On Nov 1, 6:49 am, Matt Ziebarth <mzieba...@gmail.com> wrote:
> Thanks. Could I be a pain and ask u to do another with the text below it? :-/
>
> Yeah, I'll use DXF for vector cutting but I need a raster image for engraving. I'll have to give Inkscape a try.
>
> Thanks again!
>

> On 31/10/2012, at 11:39 PM, Tamsyn Michael <tamsyn.j.mich...@gmail.com> wrote:
>
>
>
>
>
>
>
> > This what you had in mind?
>
> > PS - Inkscape can output DXF files - which is (apparently?) the defacto standard for laser cutters.  Also does PNG if that's your bag.  :)
>

> > On Wed, Oct 31, 2012 at 10:34 PM, Matt Ziebarth <mzieba...@gmail.com> wrote:
> > Would someone be able to make me a high(er) resolution image of the hacker space logo? I don't have any graphics programs installed.
> > Preferably:
> > PNG or JPG formats preferred.
> > Black and white only.
> > With an integer aspect ratio (1:1, 3:2 etc)
> > I am interested to see the difference side by side to the low res image I engraved on the laser.
> > Cheers
>
> > --
> > You received this message because you are subscribed to the Google Groups "HackerSpace - Adelaide, South Australia" group.
> > To post to this group, send email to hackerspac...@googlegroups.com.
> > To unsubscribe from this group, send email to hackerspace-adel...@googlegroups.com.

> > For more options, visit this group athttp://groups.google.com/group/hackerspace-adelaide?hl=en.

[Tamsyn Michael]

Ah, awesome - what font Simon?  I haven't seen that one (except on the business cards).

[Damien P]

On Tuesday, November 6, 2012 4:09:49 PM UTC+10:30, Tanga wrote:

Ah, awesome - what font Simon?  I haven't seen that one (except on the business cards).

I was wondering that myself.  I don't think it's any of the free Helvetica clones.  The ".org.au" part of the business card is a different font (one of the free ones), I fiddled with the spacing to make it look a bit closer.

[sighmon]

The font is Helvetica Neue:
http://www.linotype.com/1266/neuehelvetica-family.html

Hackerspace is in Helvetica Neue Bold.
Adelaide is in Helvetica Neue Roman.

For a logo width of 180mm, the corresponding font size is 53 point,
with -48 tracking between letters to tighten it up.

si.