That may come in handy. I am toying with the idea of using normal roller bearings running in U channel rather than linear bearings for the Y axis.
4x8x3 bearings would probably run nicely in that - I would have one in each corner of the bed, plus one at the middle of each side that is offset slightly higher and spring loaded (using the stiffness of FR4) to take up the slop - 8mm bearings running in a 8.8mm slot.
I would also need 4 bearings laying flat to handle the sideways movement.
On Wednesday, August 15, 2012 9:39:49 AM UTC+9:30, PJWAdelaide wrote:
> I have available a quantity of Aluminium Square U channel 12mm x 12mm > with wall thickness about 1.6mm and about 770mm long. > You are welcome to some.
An upside of choosing the RepRapPro kits is that Hackerspace members
have already constructed three of them. The Huxleys on display at
science alive were purchased as part of RRPs initial production run.
I hope that they have sourced their power supplies from a more reliable
vendor though...
On Tue, 2012-08-14 at 17:39 -0700, Bront wrote:
> Absolute newbie to Hackerspace...
> Saw your stand and RepRaps at Science Alive Adelaide. I have been researching RepRaps for a year or so and as I don't have a lot of spare time, I am looking for full kits that will work well aand are ready to build.
> Is anyone thinking of buying a wholesale lot (10 min) of RepRapPro Mendel (http://reprappro.com/Mendel) or Huxley (http://reprappro.com/Huxley)? The retail price is US$779 posted for the Mendel and US$679 for the smaller Huxley. I like the larger Mendel version and would be willing to get wholesale pricing and organise the order if there are enough interested in Adelaide or Oz in general.
Don't know yet Ben. Still waiting for a reply from UK. Trying to get 5 Huxley and 5 Medel (I am after the larger mendel which can have multiple extruders for colour change) plus a few spare parts for backup. I will post when I get more info. Brenton
Hi J, Yes, I was told that at the show, that's why I wet Webbing for info on the RepRapPro kits. What was the PS problem - I'll check if fixed! Anyone built the the RepRapPro Mendel in Adel? That is what I am interested in. Brenton
I am in the process of build a Mendel using a mix of parts from the
Prusa Mk2 and RRP designs. The ability to support multiple extruders is
quite interesting.
Currently the frame is assembled, but I'm still having troubles with the
x-carriage print warping.
On Tue, 2012-08-14 at 18:35 -0700, b...@iinet.net.au wrote:
> Hi J,
> Yes, I was told that at the show, that's why I wet Webbing for info on the RepRapPro kits. What was the PS problem - I'll check if fixed!
> Anyone built the the RepRapPro Mendel in Adel? That is what I am interested in.
> Brenton
Jon, any chance of getting the hackerspaces firmware and skeinforge
settings uploaded to the wiki or a github?
been trying to get back into hacking/3d printing but it's doing my head in,
(still facing the same old problems assuming its a combination of a bug fix
in april, my skeinforge settings being out of date, and possible thermistor
settings)
also does anyone happen to know what the default settings for the xmas
huxley kits were supposed to be?
On Wed, Aug 15, 2012 at 11:27 AM, Jonathan Wheare
<jonathanwhe...@gmail.com>wrote:
> I am in the process of build a Mendel using a mix of parts from the
> Prusa Mk2 and RRP designs. The ability to support multiple extruders is
> quite interesting.
> Currently the frame is assembled, but I'm still having troubles with the
> x-carriage print warping.
> J.
> On Tue, 2012-08-14 at 18:35 -0700, b...@iinet.net.au wrote:
> > Hi J,
> > Yes, I was told that at the show, that's why I wet Webbing for info on
> the RepRapPro kits. What was the PS problem - I'll check if fixed!
> > Anyone built the the RepRapPro Mendel in Adel? That is what I am
> interested in.
> > Brenton
> --
> You received this message because you are subscribed to the Google Groups
> "HackerSpace - Adelaide, South Australia" group.
> To post to this group, send email to hackerspace-adelaide@googlegroups.com
> .
> To unsubscribe from this group, send email to
> hackerspace-adelaide+unsubscribe@googlegroups.com.
> For more options, visit this group at
> http://groups.google.com/group/hackerspace-adelaide?hl=en.
On Tue, 2012-09-25 at 11:37 +0930, Ryan Leach wrote:
> Jon, any chance of getting the hackerspaces firmware and skeinforge
> settings uploaded to the wiki or a github?
> been trying to get back into hacking/3d printing but it's doing my
> head in, (still facing the same old problems assuming its a
> combination of a bug fix in april, my skeinforge settings being out of
> date, and possible thermistor settings)
> also does anyone happen to know what the default settings for the xmas
> huxley kits were supposed to be?
> On Wed, Aug 15, 2012 at 11:27 AM, Jonathan Wheare
> <jonathanwhe...@gmail.com> wrote:
> I am in the process of build a Mendel using a mix of parts
> from the
> Prusa Mk2 and RRP designs. The ability to support multiple
> extruders is
> quite interesting.
> Currently the frame is assembled, but I'm still having
> troubles with the
> x-carriage print warping.
> J.
> On Tue, 2012-08-14 at 18:35 -0700, b...@iinet.net.au wrote:
> > Hi J,
> > Yes, I was told that at the show, that's why I wet Webbing
> for info on the RepRapPro kits. What was the PS problem -
> I'll check if fixed!
> > Anyone built the the RepRapPro Mendel in Adel? That is what
> I am interested in.
> > Brenton
> --
> You received this message because you are subscribed to the
> Google Groups "HackerSpace - Adelaide, South Australia" group.
> To post to this group, send email to
> hackerspace-adelaide@googlegroups.com.
> To unsubscribe from this group, send email to
> hackerspace-adelaide+unsubscribe@googlegroups.com.
> For more options, visit this group at
> http://groups.google.com/group/hackerspace-adelaide?hl=en.
> -- > You received this message because you are subscribed to the Google
> Groups "HackerSpace - Adelaide, South Australia" group.
> To post to this group, send email to
> hackerspace-adelaide@googlegroups.com.
> To unsubscribe from this group, send email to hackerspace-adelaide
> +unsubscribe@googlegroups.com.
> For more options, visit this group at
> http://groups.google.com/group/hackerspace-adelaide?hl=en.
> Jon, any chance of getting the hackerspaces firmware and skeinforge
> settings uploaded to the wiki or a github?
> been trying to get back into hacking/3d printing but it's doing my head
> in, (still facing the same old problems assuming its a combination of a bug
> fix in april, my skeinforge settings being out of date, and possible
> thermistor settings)
> also does anyone happen to know what the default settings for the xmas
> huxley kits were supposed to be?
> On Wed, Aug 15, 2012 at 11:27 AM, Jonathan Wheare <
> jonathanwhe...@gmail.com> wrote:
>> I am in the process of build a Mendel using a mix of parts from the
>> Prusa Mk2 and RRP designs. The ability to support multiple extruders is
>> quite interesting.
>> Currently the frame is assembled, but I'm still having troubles with the
>> x-carriage print warping.
>> J.
>> On Tue, 2012-08-14 at 18:35 -0700, b...@iinet.net.au wrote:
>> > Hi J,
>> > Yes, I was told that at the show, that's why I wet Webbing for info on
>> the RepRapPro kits. What was the PS problem - I'll check if fixed!
>> > Anyone built the the RepRapPro Mendel in Adel? That is what I am
>> interested in.
>> > Brenton
>> --
>> You received this message because you are subscribed to the Google Groups
>> "HackerSpace - Adelaide, South Australia" group.
>> To post to this group, send email to
>> hackerspace-adelaide@googlegroups.com.
>> To unsubscribe from this group, send email to
>> hackerspace-adelaide+unsubscribe@googlegroups.com.
>> For more options, visit this group at
>> http://groups.google.com/group/hackerspace-adelaide?hl=en.
> --
> You received this message because you are subscribed to the Google Groups
> "HackerSpace - Adelaide, South Australia" group.
> To post to this group, send email to hackerspace-adelaide@googlegroups.com
> .
> To unsubscribe from this group, send email to
> hackerspace-adelaide+unsubscribe@googlegroups.com.
> For more options, visit this group at
> http://groups.google.com/group/hackerspace-adelaide?hl=en.
On Tue, 2012-09-25 at 11:45 +0930, Steven Pickles wrote:
> i had trouble slicing with the latest git pull, weird aspect ratio. i
> ended up copying the profile from the huxley netbook too.
> im uploading it to google drive now, will post a link shortly.
> pix
> On 25 September 2012 11:37, Ryan Leach <ryan.the.le...@gmail.com>
> wrote:
> Jon, any chance of getting the hackerspaces firmware and
> skeinforge settings uploaded to the wiki or a github?
> been trying to get back into hacking/3d printing but it's
> doing my head in, (still facing the same old problems assuming
> its a combination of a bug fix in april, my skeinforge
> settings being out of date, and possible thermistor settings)
> also does anyone happen to know what the default settings for
> the xmas huxley kits were supposed to be?
> On Wed, Aug 15, 2012 at 11:27 AM, Jonathan Wheare
> <jonathanwhe...@gmail.com> wrote:
> I am in the process of build a Mendel using a mix of
> parts from the
> Prusa Mk2 and RRP designs. The ability to support
> multiple extruders is
> quite interesting.
> Currently the frame is assembled, but I'm still having
> troubles with the
> x-carriage print warping.
> J.
> On Tue, 2012-08-14 at 18:35 -0700, b...@iinet.net.au
> wrote:
> > Hi J,
> > Yes, I was told that at the show, that's why I wet
> Webbing for info on the RepRapPro kits. What was the
> PS problem - I'll check if fixed!
> > Anyone built the the RepRapPro Mendel in Adel? That
> is what I am interested in.
> > Brenton
> --
> You received this message because you are subscribed
> to the Google Groups "HackerSpace - Adelaide, South
> Australia" group.
> To post to this group, send email to
> hackerspace-adelaide@googlegroups.com.
> To unsubscribe from this group, send email to
> hackerspace-adelaide+unsubscribe@googlegroups.com.
> For more options, visit this group at
> http://groups.google.com/group/hackerspace-adelaide?hl=en.
> Thanks Pix, I just realised I don't have the right profile on my laptop.
> J.
> On Tue, 2012-09-25 at 11:45 +0930, Steven Pickles wrote:
> > i had trouble slicing with the latest git pull, weird aspect ratio. i
> > ended up copying the profile from the huxley netbook too.
> > im uploading it to google drive now, will post a link shortly.
> > pix
> > On 25 September 2012 11:37, Ryan Leach <ryan.the.le...@gmail.com>
> > wrote:
> > Jon, any chance of getting the hackerspaces firmware and
> > skeinforge settings uploaded to the wiki or a github?
> > been trying to get back into hacking/3d printing but it's
> > doing my head in, (still facing the same old problems assuming
> > its a combination of a bug fix in april, my skeinforge
> > settings being out of date, and possible thermistor settings)
> > also does anyone happen to know what the default settings for
> > the xmas huxley kits were supposed to be?
> > On Wed, Aug 15, 2012 at 11:27 AM, Jonathan Wheare
> > <jonathanwhe...@gmail.com> wrote:
> > I am in the process of build a Mendel using a mix of
> > parts from the
> > Prusa Mk2 and RRP designs. The ability to support
> > multiple extruders is
> > quite interesting.
> > Currently the frame is assembled, but I'm still having
> > troubles with the
> > x-carriage print warping.
> > J.
> > On Tue, 2012-08-14 at 18:35 -0700, b...@iinet.net.au
> > wrote:
> > > Hi J,
> > > Yes, I was told that at the show, that's why I wet
> > Webbing for info on the RepRapPro kits. What was the
> > PS problem - I'll check if fixed!
> > > Anyone built the the RepRapPro Mendel in Adel? That
> > is what I am interested in.
> > > Brenton
> > --
> > You received this message because you are subscribed
> > to the Google Groups "HackerSpace - Adelaide, South
> > Australia" group.
> > To post to this group, send email to
> > hackerspace-adelaide@googlegroups.com.
> > To unsubscribe from this group, send email to
> > hackerspace-adelaide+unsubscribe@googlegroups.com.
> > For more options, visit this group at
> --
> You received this message because you are subscribed to the Google Groups
> "HackerSpace - Adelaide, South Australia" group.
> To post to this group, send email to hackerspace-adelaide@googlegroups.com
> .
> To unsubscribe from this group, send email to
> hackerspace-adelaide+unsubscribe@googlegroups.com.
> For more options, visit this group at
> http://groups.google.com/group/hackerspace-adelaide?hl=en.
> there is some unnecessary bloat in there like gcode etc...
> pix
> On 25 September 2012 11:46, Jonathan Wheare <jonathanwhe...@gmail.com>
> wrote:
>> Thanks Pix, I just realised I don't have the right profile on my laptop.
>> J.
>> On Tue, 2012-09-25 at 11:45 +0930, Steven Pickles wrote:
>> > i had trouble slicing with the latest git pull, weird aspect ratio. i
>> > ended up copying the profile from the huxley netbook too.
>> > im uploading it to google drive now, will post a link shortly.
>> > pix
>> > On 25 September 2012 11:37, Ryan Leach <ryan.the.le...@gmail.com>
>> > wrote:
>> > Jon, any chance of getting the hackerspaces firmware and
>> > skeinforge settings uploaded to the wiki or a github?
>> > been trying to get back into hacking/3d printing but it's
>> > doing my head in, (still facing the same old problems assuming
>> > its a combination of a bug fix in april, my skeinforge
>> > settings being out of date, and possible thermistor settings)
>> > also does anyone happen to know what the default settings for
>> > the xmas huxley kits were supposed to be?
>> > On Wed, Aug 15, 2012 at 11:27 AM, Jonathan Wheare
>> > <jonathanwhe...@gmail.com> wrote:
>> > I am in the process of build a Mendel using a mix of
>> > parts from the
>> > Prusa Mk2 and RRP designs. The ability to support
>> > multiple extruders is
>> > quite interesting.
>> > Currently the frame is assembled, but I'm still having
>> > troubles with the
>> > x-carriage print warping.
>> > J.
>> > On Tue, 2012-08-14 at 18:35 -0700, b...@iinet.net.au
>> > wrote:
>> > > Hi J,
>> > > Yes, I was told that at the show, that's why I wet
>> > Webbing for info on the RepRapPro kits. What was the
>> > PS problem - I'll check if fixed!
>> > > Anyone built the the RepRapPro Mendel in Adel? That
>> > is what I am interested in.
>> > > Brenton
>> > --
>> > You received this message because you are subscribed
>> > to the Google Groups "HackerSpace - Adelaide, South
>> > Australia" group.
>> > To post to this group, send email to
>> > hackerspace-adelaide@googlegroups.com.
>> > To unsubscribe from this group, send email to
>> > hackerspace-adelaide+unsubscribe@googlegroups.com.
>> > For more options, visit this group at
>> --
>> You received this message because you are subscribed to the Google Groups
>> "HackerSpace - Adelaide, South Australia" group.
>> To post to this group, send email to
>> hackerspace-adelaide@googlegroups.com.
>> To unsubscribe from this group, send email to
>> hackerspace-adelaide+unsubscribe@googlegroups.com.
>> For more options, visit this group at
>> http://groups.google.com/group/hackerspace-adelaide?hl=en.
> --
> You received this message because you are subscribed to the Google Groups
> "HackerSpace - Adelaide, South Australia" group.
> To post to this group, send email to hackerspace-adelaide@googlegroups.com.
> To unsubscribe from this group, send email to
> hackerspace-adelaide+unsubscribe@googlegroups.com.
> For more options, visit this group at
> http://groups.google.com/group/hackerspace-adelaide?hl=en.
Pix & Ryan, I just double checked and the Start_PLA file in
skeinforge/skeinforge_applications/alterations/ has the line:
M92 X 80
This adjusts the steps per milimeter of the x-axis for the hackerspace
huxleys different gear size. I would suggest ensuring this line is
removed before using the profile with Paul or Ryans huxleys.
> > there is some unnecessary bloat in there like gcode etc...
> > pix
> > On 25 September 2012 11:46, Jonathan Wheare <jonathanwhe...@gmail.com>
> > wrote:
> >> Thanks Pix, I just realised I don't have the right profile on my laptop.
> >> J.
> >> On Tue, 2012-09-25 at 11:45 +0930, Steven Pickles wrote:
> >> > i had trouble slicing with the latest git pull, weird aspect ratio. i
> >> > ended up copying the profile from the huxley netbook too.
> >> > im uploading it to google drive now, will post a link shortly.
> >> > pix
> >> > On 25 September 2012 11:37, Ryan Leach <ryan.the.le...@gmail.com>
> >> > wrote:
> >> > Jon, any chance of getting the hackerspaces firmware and
> >> > skeinforge settings uploaded to the wiki or a github?
> >> > been trying to get back into hacking/3d printing but it's
> >> > doing my head in, (still facing the same old problems assuming
> >> > its a combination of a bug fix in april, my skeinforge
> >> > settings being out of date, and possible thermistor settings)
> >> > also does anyone happen to know what the default settings for
> >> > the xmas huxley kits were supposed to be?
> >> > On Wed, Aug 15, 2012 at 11:27 AM, Jonathan Wheare
> >> > <jonathanwhe...@gmail.com> wrote:
> >> > I am in the process of build a Mendel using a mix of
> >> > parts from the
> >> > Prusa Mk2 and RRP designs. The ability to support
> >> > multiple extruders is
> >> > quite interesting.
> >> > Currently the frame is assembled, but I'm still having
> >> > troubles with the
> >> > x-carriage print warping.
> >> > J.
> >> > On Tue, 2012-08-14 at 18:35 -0700, b...@iinet.net.au
> >> > wrote:
> >> > > Hi J,
> >> > > Yes, I was told that at the show, that's why I wet
> >> > Webbing for info on the RepRapPro kits. What was the
> >> > PS problem - I'll check if fixed!
> >> > > Anyone built the the RepRapPro Mendel in Adel? That
> >> > is what I am interested in.
> >> > > Brenton
> >> > --
> >> > You received this message because you are subscribed
> >> > to the Google Groups "HackerSpace - Adelaide, South
> >> > Australia" group.
> >> > To post to this group, send email to
> >> > hackerspace-adelaide@googlegroups.com.
> >> > To unsubscribe from this group, send email to
> >> > hackerspace-adelaide+unsubscribe@googlegroups.com.
> >> > For more options, visit this group at
> >> --
> >> You received this message because you are subscribed to the Google Groups
> >> "HackerSpace - Adelaide, South Australia" group.
> >> To post to this group, send email to
> >> hackerspace-adelaide@googlegroups.com.
> >> To unsubscribe from this group, send email to
> >> hackerspace-adelaide+unsubscribe@googlegroups.com.
> >> For more options, visit this group at
> >> http://groups.google.com/group/hackerspace-adelaide?hl=en.
> > --
> > You received this message because you are subscribed to the Google Groups
> > "HackerSpace - Adelaide, South Australia" group.
> > To post to this group, send email to hackerspace-adelaide@googlegroups.com.
> > To unsubscribe from this group, send email to
> > hackerspace-adelaide+unsubscribe@googlegroups.com.
> > For more options, visit this group at
> > http://groups.google.com/group/hackerspace-adelaide?hl=en.
> Pix & Ryan, I just double checked and the Start_PLA file in
> skeinforge/skeinforge_applications/alterations/ has the line:
> M92 X 80
> This adjusts the steps per milimeter of the x-axis for the hackerspace
> huxleys different gear size. I would suggest ensuring this line is
> removed before using the profile with Paul or Ryans huxleys.
> J.
> On Tue, 2012-09-25 at 12:13 +0930, Paul Schulz wrote:
> > Pix et.al. as a data point..
> > I printed the 'tardis' from STL (rather than the gcode file that was
> > there) and it came out square (ie with the correct aspect ratio).
> > > there is some unnecessary bloat in there like gcode etc...
> > > pix
> > > On 25 September 2012 11:46, Jonathan Wheare <jonathanwhe...@gmail.com>
> > > wrote:
> > >> Thanks Pix, I just realised I don't have the right profile on my
> laptop.
> > >> J.
> > >> On Tue, 2012-09-25 at 11:45 +0930, Steven Pickles wrote:
> > >> > i had trouble slicing with the latest git pull, weird aspect ratio.
> i
> > >> > ended up copying the profile from the huxley netbook too.
> > >> > im uploading it to google drive now, will post a link shortly.
> > >> > pix
> > >> > On 25 September 2012 11:37, Ryan Leach <ryan.the.le...@gmail.com>
> > >> > wrote:
> > >> > Jon, any chance of getting the hackerspaces firmware and
> > >> > skeinforge settings uploaded to the wiki or a github?
> > >> > been trying to get back into hacking/3d printing but it's
> > >> > doing my head in, (still facing the same old problems
> assuming
> > >> > its a combination of a bug fix in april, my skeinforge
> > >> > settings being out of date, and possible thermistor
> settings)
> > >> > also does anyone happen to know what the default settings
> for
> > >> > the xmas huxley kits were supposed to be?
> > >> > On Wed, Aug 15, 2012 at 11:27 AM, Jonathan Wheare
> > >> > <jonathanwhe...@gmail.com> wrote:
> > >> > I am in the process of build a Mendel using a mix of
> > >> > parts from the
> > >> > Prusa Mk2 and RRP designs. The ability to support
> > >> > multiple extruders is
> > >> > quite interesting.
> > >> > Currently the frame is assembled, but I'm still
> having
> > >> > troubles with the
> > >> > x-carriage print warping.
> > >> > J.
> > >> > On Tue, 2012-08-14 at 18:35 -0700,
> b...@iinet.net.au
> > >> > wrote:
> > >> > > Hi J,
> > >> > > Yes, I was told that at the show, that's why I wet
> > >> > Webbing for info on the RepRapPro kits. What was
> the
> > >> > PS problem - I'll check if fixed!
> > >> > > Anyone built the the RepRapPro Mendel in Adel?
> That
> > >> > is what I am interested in.
> > >> > > Brenton
> > >> > --
> > >> > You received this message because you are subscribed
> > >> > to the Google Groups "HackerSpace - Adelaide, South
> > >> > Australia" group.
> > >> > To post to this group, send email to
> > >> > hackerspace-adelaide@googlegroups.com.
> > >> > To unsubscribe from this group, send email to
> > >> > hackerspace-adelaide+unsubscribe@googlegroups.com.
> > >> > For more options, visit this group at
> > >> --
> > >> You received this message because you are subscribed to the Google
> Groups
> > >> "HackerSpace - Adelaide, South Australia" group.
> > >> To post to this group, send email to
> > >> hackerspace-adelaide@googlegroups.com.
> > >> To unsubscribe from this group, send email to
> > >> hackerspace-adelaide+unsubscribe@googlegroups.com.
> > >> For more options, visit this group at
> > >> http://groups.google.com/group/hackerspace-adelaide?hl=en.
> > > --
> > > You received this message because you are subscribed to the Google
> Groups
> > > "HackerSpace - Adelaide, South Australia" group.
> > > To post to this group, send email to
> hackerspace-adelaide@googlegroups.com.
> > > To unsubscribe from this group, send email to
> > > hackerspace-adelaide+unsubscribe@googlegroups.com.
> > > For more options, visit this group at
> > > http://groups.google.com/group/hackerspace-adelaide?hl=en.
> --
> You received this message because you are subscribed to the Google Groups
> "HackerSpace - Adelaide, South Australia" group.
> To post to this group, send email to hackerspace-adelaide@googlegroups.com
> .
> To unsubscribe from this group, send email to
> hackerspace-adelaide+unsubscribe@googlegroups.com.
> For more options, visit this group at
> http://groups.google.com/group/hackerspace-adelaide?hl=en.
i'm coming in really late to this thread to say ideally i'd like to take
the thingomatic apart and rebuild it so that i know how it works and how to
fix it when it (inevitably) breaks every three days while i'm a nomadic
fablab.
but that needs to be numpty-level (which is pre-beginner).
On 25 September 2012 13:38, Steven Pickles <thatpix...@gmail.com> wrote:
> On 25 September 2012 12:48, Jonathan Wheare <jonathanwhe...@gmail.com>wrote:
>> Pix & Ryan, I just double checked and the Start_PLA file in
>> skeinforge/skeinforge_applications/alterations/ has the line:
>> M92 X 80
>> This adjusts the steps per milimeter of the x-axis for the hackerspace
>> huxleys different gear size. I would suggest ensuring this line is
>> removed before using the profile with Paul or Ryans huxleys.
>> J.
>> On Tue, 2012-09-25 at 12:13 +0930, Paul Schulz wrote:
>> > Pix et.al. as a data point..
>> > I printed the 'tardis' from STL (rather than the gcode file that was
>> > there) and it came out square (ie with the correct aspect ratio).
>> > > there is some unnecessary bloat in there like gcode etc...
>> > > pix
>> > > On 25 September 2012 11:46, Jonathan Wheare <jonathanwhe...@gmail.com
>> > > wrote:
>> > >> Thanks Pix, I just realised I don't have the right profile on my
>> laptop.
>> > >> J.
>> > >> On Tue, 2012-09-25 at 11:45 +0930, Steven Pickles wrote:
>> > >> > i had trouble slicing with the latest git pull, weird aspect
>> ratio. i
>> > >> > ended up copying the profile from the huxley netbook too.
>> > >> > im uploading it to google drive now, will post a link shortly.
>> > >> > pix
>> > >> > On 25 September 2012 11:37, Ryan Leach <ryan.the.le...@gmail.com>
>> > >> > wrote:
>> > >> > Jon, any chance of getting the hackerspaces firmware and
>> > >> > skeinforge settings uploaded to the wiki or a github?
>> > >> > been trying to get back into hacking/3d printing but it's
>> > >> > doing my head in, (still facing the same old problems
>> assuming
>> > >> > its a combination of a bug fix in april, my skeinforge
>> > >> > settings being out of date, and possible thermistor
>> settings)
>> > >> > also does anyone happen to know what the default settings
>> for
>> > >> > the xmas huxley kits were supposed to be?
>> > >> > On Wed, Aug 15, 2012 at 11:27 AM, Jonathan Wheare
>> > >> > <jonathanwhe...@gmail.com> wrote:
>> > >> > I am in the process of build a Mendel using a mix
>> of
>> > >> > parts from the
>> > >> > Prusa Mk2 and RRP designs. The ability to support
>> > >> > multiple extruders is
>> > >> > quite interesting.
>> > >> > Currently the frame is assembled, but I'm still
>> having
>> > >> > troubles with the
>> > >> > x-carriage print warping.
>> > >> > J.
>> > >> > On Tue, 2012-08-14 at 18:35 -0700,
>> b...@iinet.net.au
>> > >> > wrote:
>> > >> > > Hi J,
>> > >> > > Yes, I was told that at the show, that's why I
>> wet
>> > >> > Webbing for info on the RepRapPro kits. What was
>> the
>> > >> > PS problem - I'll check if fixed!
>> > >> > > Anyone built the the RepRapPro Mendel in Adel?
>> That
>> > >> > is what I am interested in.
>> > >> > > Brenton
>> > >> > --
>> > >> > You received this message because you are
>> subscribed
>> > >> > to the Google Groups "HackerSpace - Adelaide, South
>> > >> > Australia" group.
>> > >> > To post to this group, send email to
>> > >> > hackerspace-adelaide@googlegroups.com.
>> > >> > To unsubscribe from this group, send email to
>> > >> > hackerspace-adelaide+unsubscribe@googlegroups.com.
>> > >> > For more options, visit this group at
>> > >> --
>> > >> You received this message because you are subscribed to the Google
>> Groups
>> > >> "HackerSpace - Adelaide, South Australia" group.
>> > >> To post to this group, send email to
>> > >> hackerspace-adelaide@googlegroups.com.
>> > >> To unsubscribe from this group, send email to
>> > >> hackerspace-adelaide+unsubscribe@googlegroups.com.
>> > >> For more options, visit this group at
>> > >> http://groups.google.com/group/hackerspace-adelaide?hl=en.
>> > > --
>> > > You received this message because you are subscribed to the Google
>> Groups
>> > > "HackerSpace - Adelaide, South Australia" group.
>> > > To post to this group, send email to
>> hackerspace-adelaide@googlegroups.com.
>> > > To unsubscribe from this group, send email to
>> > > hackerspace-adelaide+unsubscribe@googlegroups.com.
>> > > For more options, visit this group at
>> > > http://groups.google.com/group/hackerspace-adelaide?hl=en.
>> --
>> You received this message because you are subscribed to the Google Groups
>> "HackerSpace - Adelaide, South Australia" group.
>> To post to this group, send email to
>> hackerspace-adelaide@googlegroups.com.
>> To unsubscribe from this group, send email to
>> hackerspace-adelaide+unsubscribe@googlegroups.com.
>> For more options, visit this group at
>> http://groups.google.com/group/hackerspace-adelaide?hl=en.
> --
> You received this message because you are subscribed to the Google Groups
> "HackerSpace - Adelaide, South Australia" group.
> To post to this group, send email to hackerspace-adelaide@googlegroups.com
> .
> To unsubscribe from this group, send email to
> hackerspace-adelaide+unsubscribe@googlegroups.com.
> For more options, visit this group at
> http://groups.google.com/group/hackerspace-adelaide?hl=en.
On Friday, June 1, 2012 12:34:13 PM UTC+9:30, Scott B wrote:
> I have been having a bit of a chat to Pix behind the scenes regarding > building/purchasing my own 3D printer.
> At the moment we are looking at the possibility of building a > something like a MendelMax ( http://reprap.org/wiki/MendelMax ) - > using the reprap software and compatible electronics, but with my own > aluminium tube based frame and components to hopefully end up with a > higher quality machine than some of the questionable Huxley/Mendel > kits that are currently available.
> We may also choose to make our own compatible main board that will > allow modular plug in stepper motor drivers and seperate power > supplies for the controls, hot end and heated bed - plent of options > to discuss yet.
> So If anyone else is currently looking at building/buying a machine > also, stick your hand up if you want to get on board we can group > buy the motors, drivers etc. and work together on the development - > if I am going to fire up the CNC Mill/Lathe to make one part for mine, > I mght as well press the 'Start' button a few more times a make a > few...
> i'm coming in really late to this thread to say ideally i'd like to take
> the thingomatic apart and rebuild it so that i know how it works and how to
> fix it when it (inevitably) breaks every three days while i'm a nomadic
> fablab.
> but that needs to be numpty-level (which is pre-beginner).
> On 25 September 2012 13:38, Steven Pickles <thatpix...@gmail.com> wrote:
>> ahhh, so many questions answered now!
>> On 25 September 2012 12:48, Jonathan Wheare <jonathanwhe...@gmail.com>wrote:
>>> Pix & Ryan, I just double checked and the Start_PLA file in
>>> skeinforge/skeinforge_applications/alterations/ has the line:
>>> M92 X 80
>>> This adjusts the steps per milimeter of the x-axis for the hackerspace
>>> huxleys different gear size. I would suggest ensuring this line is
>>> removed before using the profile with Paul or Ryans huxleys.
>>> J.
>>> On Tue, 2012-09-25 at 12:13 +0930, Paul Schulz wrote:
>>> > Pix et.al. as a data point..
>>> > I printed the 'tardis' from STL (rather than the gcode file that was
>>> > there) and it came out square (ie with the correct aspect ratio).
>>> > > there is some unnecessary bloat in there like gcode etc...
>>> > > pix
>>> > > On 25 September 2012 11:46, Jonathan Wheare <
>>> jonathanwhe...@gmail.com>
>>> > > wrote:
>>> > >> Thanks Pix, I just realised I don't have the right profile on my
>>> laptop.
>>> > >> J.
>>> > >> On Tue, 2012-09-25 at 11:45 +0930, Steven Pickles wrote:
>>> > >> > i had trouble slicing with the latest git pull, weird aspect
>>> ratio. i
>>> > >> > ended up copying the profile from the huxley netbook too.
>>> > >> > im uploading it to google drive now, will post a link shortly.
>>> > >> > pix
>>> > >> > On 25 September 2012 11:37, Ryan Leach <ryan.the.le...@gmail.com>
>>> > >> > wrote:
>>> > >> > Jon, any chance of getting the hackerspaces firmware and
>>> > >> > skeinforge settings uploaded to the wiki or a github?
>>> > >> > been trying to get back into hacking/3d printing but it's
>>> > >> > doing my head in, (still facing the same old problems
>>> assuming
>>> > >> > its a combination of a bug fix in april, my skeinforge
>>> > >> > settings being out of date, and possible thermistor
>>> settings)
>>> > >> > also does anyone happen to know what the default settings
>>> for
>>> > >> > the xmas huxley kits were supposed to be?
>>> > >> > On Wed, Aug 15, 2012 at 11:27 AM, Jonathan Wheare
>>> > >> > <jonathanwhe...@gmail.com> wrote:
>>> > >> > I am in the process of build a Mendel using a mix
>>> of
>>> > >> > parts from the
>>> > >> > Prusa Mk2 and RRP designs. The ability to support
>>> > >> > multiple extruders is
>>> > >> > quite interesting.
>>> > >> > Currently the frame is assembled, but I'm still
>>> having
>>> > >> > troubles with the
>>> > >> > x-carriage print warping.
>>> > >> > J.
>>> > >> > On Tue, 2012-08-14 at 18:35 -0700,
>>> b...@iinet.net.au
>>> > >> > wrote:
>>> > >> > > Hi J,
>>> > >> > > Yes, I was told that at the show, that's why I
>>> wet
>>> > >> > Webbing for info on the RepRapPro kits. What was
>>> the
>>> > >> > PS problem - I'll check if fixed!
>>> > >> > > Anyone built the the RepRapPro Mendel in Adel?
>>> That
>>> > >> > is what I am interested in.
>>> > >> > > Brenton
>>> > >> > --
>>> > >> > You received this message because you are
>>> subscribed
>>> > >> > to the Google Groups "HackerSpace - Adelaide,
>>> South
>>> > >> > Australia" group.
>>> > >> > To post to this group, send email to
>>> > >> > hackerspace-adelaide@googlegroups.com.
>>> > >> > To unsubscribe from this group, send email to
>>> > >> > hackerspace-adelaide+unsubscribe@googlegroups.com
>>> .
>>> > >> > For more options, visit this group at
>>> > >> --
>>> > >> You received this message because you are subscribed to the Google
>>> Groups
>>> > >> "HackerSpace - Adelaide, South Australia" group.
>>> > >> To post to this group, send email to
>>> > >> hackerspace-adelaide@googlegroups.com.
>>> > >> To unsubscribe from this group, send email to
>>> > >> hackerspace-adelaide+unsubscribe@googlegroups.com.
>>> > >> For more options, visit this group at
>>> > >> http://groups.google.com/group/hackerspace-adelaide?hl=en.
>>> > > --
>>> > > You received this message because you are subscribed to the Google
>>> Groups
>>> > > "HackerSpace - Adelaide, South Australia" group.
>>> > > To post to this group, send email to
>>> hackerspace-adelaide@googlegroups.com.
>>> > > To unsubscribe from this group, send email to
>>> > > hackerspace-adelaide+unsubscribe@googlegroups.com.
>>> > > For more options, visit this group at
>>> > > http://groups.google.com/group/hackerspace-adelaide?hl=en.
>>> --
>>> You received this message because you are subscribed to the Google
>>> Groups "HackerSpace - Adelaide, South Australia" group.
>>> To post to this group, send email to
>>> hackerspace-adelaide@googlegroups.com.
>>> To unsubscribe from this group, send email to
>>> hackerspace-adelaide+unsubscribe@googlegroups.com.
>>> For more options, visit this group at
>>> http://groups.google.com/group/hackerspace-adelaide?hl=en.
>> --
>> You received this message because you are subscribed to the Google Groups
>> "HackerSpace - Adelaide, South Australia" group.
>> To post to this group, send email to
>> hackerspace-adelaide@googlegroups.com.
>> To unsubscribe from this group, send email to
>> hackerspace-adelaide+unsubscribe@googlegroups.com.
>> For more options, visit this group at
>> http://groups.google.com/group/hackerspace-adelaide?hl=en.
> --
> You received this message because you are subscribed to the Google Groups
> "HackerSpace - Adelaide, South Australia" group.
> To post to this group, send email to hackerspace-adelaide@googlegroups.com
> .
> To unsubscribe from this group, send email to
> hackerspace-adelaide+unsubscribe@googlegroups.com.
> For more options, visit this group at
> http://groups.google.com/group/hackerspace-adelaide?hl=en.
> i'm coming in really late to this thread to say ideally i'd like to take
> the thingomatic apart and rebuild it so that i know how it works and how to
> fix it when it (inevitably) breaks every three days while i'm a nomadic
> fablab.
> but that needs to be numpty-level (which is pre-beginner).
> On 25 September 2012 13:38, Steven Pickles <thatpix...@gmail.com> wrote:
>> ahhh, so many questions answered now!
>> On 25 September 2012 12:48, Jonathan Wheare <jonathanwhe...@gmail.com>wrote:
>>> Pix & Ryan, I just double checked and the Start_PLA file in
>>> skeinforge/skeinforge_applications/alterations/ has the line:
>>> M92 X 80
>>> This adjusts the steps per milimeter of the x-axis for the hackerspace
>>> huxleys different gear size. I would suggest ensuring this line is
>>> removed before using the profile with Paul or Ryans huxleys.
>>> J.
>>> On Tue, 2012-09-25 at 12:13 +0930, Paul Schulz wrote:
>>> > Pix et.al. as a data point..
>>> > I printed the 'tardis' from STL (rather than the gcode file that was
>>> > there) and it came out square (ie with the correct aspect ratio).
>>> > > there is some unnecessary bloat in there like gcode etc...
>>> > > pix
>>> > > On 25 September 2012 11:46, Jonathan Wheare <
>>> jonathanwhe...@gmail.com>
>>> > > wrote:
>>> > >> Thanks Pix, I just realised I don't have the right profile on my
>>> laptop.
>>> > >> J.
>>> > >> On Tue, 2012-09-25 at 11:45 +0930, Steven Pickles wrote:
>>> > >> > i had trouble slicing with the latest git pull, weird aspect
>>> ratio. i
>>> > >> > ended up copying the profile from the huxley netbook too.
>>> > >> > im uploading it to google drive now, will post a link shortly.
>>> > >> > pix
>>> > >> > On 25 September 2012 11:37, Ryan Leach <ryan.the.le...@gmail.com>
>>> > >> > wrote:
>>> > >> > Jon, any chance of getting the hackerspaces firmware and
>>> > >> > skeinforge settings uploaded to the wiki or a github?
>>> > >> > been trying to get back into hacking/3d printing but it's
>>> > >> > doing my head in, (still facing the same old problems
>>> assuming
>>> > >> > its a combination of a bug fix in april, my skeinforge
>>> > >> > settings being out of date, and possible thermistor
>>> settings)
>>> > >> > also does anyone happen to know what the default settings
>>> for
>>> > >> > the xmas huxley kits were supposed to be?
>>> > >> > On Wed, Aug 15, 2012 at 11:27 AM, Jonathan Wheare
>>> > >> > <jonathanwhe...@gmail.com> wrote:
>>> > >> > I am in the process of build a Mendel using a mix
>>> of
>>> > >> > parts from the
>>> > >> > Prusa Mk2 and RRP designs. The ability to support
>>> > >> > multiple extruders is
>>> > >> > quite interesting.
>>> > >> > Currently the frame is assembled, but I'm still
>>> having
>>> > >> > troubles with the
>>> > >> > x-carriage print warping.
>>> > >> > J.
>>> > >> > On Tue, 2012-08-14 at 18:35 -0700,
>>> b...@iinet.net.au
>>> > >> > wrote:
>>> > >> > > Hi J,
>>> > >> > > Yes, I was told that at the show, that's why I
>>> wet
>>> > >> > Webbing for info on the RepRapPro kits. What was
>>> the
>>> > >> > PS problem - I'll check if fixed!
>>> > >> > > Anyone built the the RepRapPro Mendel in Adel?
>>> That
>>> > >> > is what I am interested in.
>>> > >> > > Brenton
>>> > >> > --
>>> > >> > You received this message because you are
>>> subscribed
>>> > >> > to the Google Groups "HackerSpace - Adelaide,
>>> South
>>> > >> > Australia" group.
>>> > >> > To post to this group, send email to
>>> > >> > hackerspace-adelaide@googlegroups.com.
>>> > >> > To unsubscribe from this group, send email to
>>> > >> > hackerspace-adelaide+unsubscribe@googlegroups.com
>>> .
>>> > >> > For more options, visit this group at
>>> > >> --
>>> > >> You received this message because you are subscribed to the Google
>>> Groups
>>> > >> "HackerSpace - Adelaide, South Australia" group.
>>> > >> To post to this group, send email to
>>> > >> hackerspace-adelaide@googlegroups.com.
>>> > >> To unsubscribe from this group, send email to
>>> > >> hackerspace-adelaide+unsubscribe@googlegroups.com.
>>> > >> For more options, visit this group at
>>> > >> http://groups.google.com/group/hackerspace-adelaide?hl=en.
>>> > > --
>>> > > You received this message because you are subscribed to the Google
>>> Groups
>>> > > "HackerSpace - Adelaide, South Australia" group.
>>> > > To post to this group, send email to
>>> hackerspace-adelaide@googlegroups.com.
>>> > > To unsubscribe from this group, send email to
>>> > > hackerspace-adelaide+unsubscribe@googlegroups.com.
>>> > > For more options, visit this group at
>>> > > http://groups.google.com/group/hackerspace-adelaide?hl=en.
>>> --
>>> You received this message because you are subscribed to the Google
>>> Groups "HackerSpace - Adelaide, South Australia" group.
>>> To post to this group, send email to
>>> hackerspace-adelaide@googlegroups.com.
>>> To unsubscribe from this group, send email to
>>> hackerspace-adelaide+unsubscribe@googlegroups.com.
>>> For more options, visit this group at
>>> http://groups.google.com/group/hackerspace-adelaide?hl=en.
>> --
>> You received this message because you are subscribed to the Google Groups
>> "HackerSpace - Adelaide, South Australia" group.
>> To post to this group, send email to
>> hackerspace-adelaide@googlegroups.com.
>> To unsubscribe from this group, send email to
>> hackerspace-adelaide+unsubscribe@googlegroups.com.
>> For more options, visit this group at
>> http://groups.google.com/group/hackerspace-adelaide?hl=en.
> --
> You received this message because you are subscribed to the Google Groups
> "HackerSpace - Adelaide, South Australia" group.
> To post to this group, send email to hackerspace-adelaide@googlegroups.com
> .
> To unsubscribe from this group, send email to
> hackerspace-adelaide+unsubscribe@googlegroups.com.
> For more options, visit this group at
> http://groups.google.com/group/hackerspace-adelaide?hl=en.
life is stupid right now, i'm barely ever in Adelaide :(
i agree that it shouldn't be a normal session.
it might have to be after the regional arts australia conference (oct
18-21) for me - before the masterclass? so sometime w/b 22nd (tho not 22nd
because i will need to sleep the sleep of the dead that day).
Tamsyn I'd be more than happy for others to be involved in this!
Jonathan had also offered to help out with this (training the numpty) too.
I had also suggested videoing it... maybe...
Big thanks x
On 25 September 2012 13:57, Steven Pickles <thatpix...@gmail.com> wrote:
> When's a good day for this Fee? It needn't be a normal session (in fact
> better not so I can stay focussed).
> pix
> On 25 September 2012 13:20, Fee Plumley <f...@technoevangelist.net> wrote:
>> i'm coming in really late to this thread to say ideally i'd like to take
>> the thingomatic apart and rebuild it so that i know how it works and how to
>> fix it when it (inevitably) breaks every three days while i'm a nomadic
>> fablab.
>> but that needs to be numpty-level (which is pre-beginner).
>> On 25 September 2012 13:38, Steven Pickles <thatpix...@gmail.com> wrote:
>>> ahhh, so many questions answered now!
>>> On 25 September 2012 12:48, Jonathan Wheare <jonathanwhe...@gmail.com>wrote:
>>>> Pix & Ryan, I just double checked and the Start_PLA file in
>>>> skeinforge/skeinforge_applications/alterations/ has the line:
>>>> M92 X 80
>>>> This adjusts the steps per milimeter of the x-axis for the hackerspace
>>>> huxleys different gear size. I would suggest ensuring this line is
>>>> removed before using the profile with Paul or Ryans huxleys.
>>>> J.
>>>> On Tue, 2012-09-25 at 12:13 +0930, Paul Schulz wrote:
>>>> > Pix et.al. as a data point..
>>>> > I printed the 'tardis' from STL (rather than the gcode file that was
>>>> > there) and it came out square (ie with the correct aspect ratio).
>>>> > > there is some unnecessary bloat in there like gcode etc...
>>>> > > pix
>>>> > > On 25 September 2012 11:46, Jonathan Wheare <
>>>> jonathanwhe...@gmail.com>
>>>> > > wrote:
>>>> > >> Thanks Pix, I just realised I don't have the right profile on my
>>>> laptop.
>>>> > >> J.
>>>> > >> On Tue, 2012-09-25 at 11:45 +0930, Steven Pickles wrote:
>>>> > >> > i had trouble slicing with the latest git pull, weird aspect
>>>> ratio. i
>>>> > >> > ended up copying the profile from the huxley netbook too.
>>>> > >> > im uploading it to google drive now, will post a link shortly.
>>>> > >> > pix
>>>> > >> > On 25 September 2012 11:37, Ryan Leach <ryan.the.le...@gmail.com
>>>> > >> > wrote:
>>>> > >> > Jon, any chance of getting the hackerspaces firmware and
>>>> > >> > skeinforge settings uploaded to the wiki or a github?
>>>> > >> > been trying to get back into hacking/3d printing but it's
>>>> > >> > doing my head in, (still facing the same old problems
>>>> assuming
>>>> > >> > its a combination of a bug fix in april, my skeinforge
>>>> > >> > settings being out of date, and possible thermistor
>>>> settings)
>>>> > >> > also does anyone happen to know what the default
>>>> settings for
>>>> > >> > the xmas huxley kits were supposed to be?
>>>> > >> > On Wed, Aug 15, 2012 at 11:27 AM, Jonathan Wheare
>>>> > >> > <jonathanwhe...@gmail.com> wrote:
>>>> > >> > I am in the process of build a Mendel using a
>>>> mix of
>>>> > >> > parts from the
>>>> > >> > Prusa Mk2 and RRP designs. The ability to
>>>> support
>>>> > >> > multiple extruders is
>>>> > >> > quite interesting.
>>>> > >> > Currently the frame is assembled, but I'm still
>>>> having
>>>> > >> > troubles with the
>>>> > >> > x-carriage print warping.
>>>> > >> > J.
>>>> > >> > On Tue, 2012-08-14 at 18:35 -0700,
>>>> b...@iinet.net.au
>>>> > >> > wrote:
>>>> > >> > > Hi J,
>>>> > >> > > Yes, I was told that at the show, that's why I
>>>> wet
>>>> > >> > Webbing for info on the RepRapPro kits. What
>>>> was the
>>>> > >> > PS problem - I'll check if fixed!
>>>> > >> > > Anyone built the the RepRapPro Mendel in Adel?
>>>> That
>>>> > >> > is what I am interested in.
>>>> > >> > > Brenton
>>>> > >> > --
>>>> > >> > You received this message because you are
>>>> subscribed
>>>> > >> > to the Google Groups "HackerSpace - Adelaide,
>>>> South
>>>> > >> > Australia" group.
>>>> > >> > To post to this group, send email to
>>>> > >> > hackerspace-adelaide@googlegroups.com.
>>>> > >> > To unsubscribe from this group, send email to
>>>> hackerspace-adelaide+unsubscribe@googlegroups.com.
>>>> > >> > For more options, visit this group at
>>>> > >> --
>>>> > >> You received this message because you are subscribed to the Google
>>>> Groups
>>>> > >> "HackerSpace - Adelaide, South Australia" group.
>>>> > >> To post to this group, send email to
>>>> > >> hackerspace-adelaide@googlegroups.com.
>>>> > >> To unsubscribe from this group, send email to
>>>> > >> hackerspace-adelaide+unsubscribe@googlegroups.com.
>>>> > >> For more options, visit this group at
>>>> > >> http://groups.google.com/group/hackerspace-adelaide?hl=en.
>>>> > > --
>>>> > > You received this message because you are subscribed to the Google
>>>> Groups
>>>> > > "HackerSpace - Adelaide, South Australia" group.
>>>> > > To post to this group, send email to
>>>> hackerspace-adelaide@googlegroups.com.
>>>> > > To unsubscribe from this group, send email to
>>>> > > hackerspace-adelaide+unsubscribe@googlegroups.com.
>>>> > > For more options, visit this group at
>>>> > > http://groups.google.com/group/hackerspace-adelaide?hl=en.
>>>> --
>>>> You received this message because you are subscribed to the Google
>>>> Groups "HackerSpace - Adelaide, South Australia" group.
>>>> To post to this group, send email to
>>>> hackerspace-adelaide@googlegroups.com.
>>>> To unsubscribe from this group, send email to
>>>> hackerspace-adelaide+unsubscribe@googlegroups.com.
>>>> For more options, visit this group at
>>>> http://groups.google.com/group/hackerspace-adelaide?hl=en.
>>> --
>>> You received this message because you are subscribed to the Google
>>> Groups "HackerSpace - Adelaide, South Australia" group.
>>> To post to this group, send email to
>>> hackerspace-adelaide@googlegroups.com.
>>> To unsubscribe from this group, send email to
>>> hackerspace-adelaide+unsubscribe@googlegroups.com.
>>> For more options, visit this group at
>>> http://groups.google.com/group/hackerspace-adelaide?hl=en.
>> --
>> You received this message because you are subscribed to the Google Groups
>> "HackerSpace - Adelaide, South Australia" group.
>> To post to this group, send email to
>> hackerspace-adelaide@googlegroups.com.
>> To unsubscribe from this group, send email to
>> hackerspace-adelaide+unsubscribe@googlegroups.com.
>> For more options, visit this group at
>> http://groups.google.com/group/hackerspace-adelaide?hl=en.
> --
> You received this message because you are subscribed to the Google Groups
> "HackerSpace - Adelaide, South Australia" group.
> To post to this group, send email to hackerspace-adelaide@googlegroups.com
> .
> To unsubscribe from this group, send email to
> hackerspace-adelaide+unsubscribe@googlegroups.com.
> For more options, visit this group at
> http://groups.google.com/group/hackerspace-adelaide?hl=en.
I want to get in on the session where you introduce a kits of parts all
bought in one hit from one place, guaranteed to work if assembled properly,
and not costing an arm and a leg.
Though I'd love a 3D printer, my head is still hurting from trying to get
XBee thingies to cooperate. So I don't want the added compexities of a
half-baked 3D printer.
I still have a lot of XBee reading/learning to do.
Things I've learnt so far:
- XBee is not for the faint hearted if you want more than two to talk to
each other.
- PHP doesn't know how to read a serial port reliably. Perl on the
other hand, does, with very little code.
- Manufacturer's documentation doesn't tell the whole story.
- Though it isn't spec'd to, the LM35 will send a decent temperate
reading at a supply voltage of 3v.
- It *is* possible to brick an XBee module. (But I believe it can be
unbricked -haven't tried it yet).
Sorry, hijacking a thread here. Got carried away.
My first sentence still holds.
Ken.
On 25 September 2012 14:44, Tamsyn Michael <tamsyn.j.mich...@gmail.com>wrote:
> Heh, just having a conversation with Jake, he'd like to get in on this
> build too.
> --
> You received this message because you are subscribed to the Google Groups
> "HackerSpace - Adelaide, South Australia" group.
> To post to this group, send email to hackerspace-adelaide@googlegroups.com
> .
> To unsubscribe from this group, send email to
> hackerspace-adelaide+unsubscribe@googlegroups.com.
> For more options, visit this group at
> http://groups.google.com/group/hackerspace-adelaide?hl=en.
I have a brand new copy of "Building Wireless Sensor Networks" if anyone
wants to buy it off me.
its focus is Series 2 XBee's, not series 1, of which I have 6, wish I had
bought the book before the xbee's!!
I'm broke and could really use the cash.
Also 2 Sparkfun XBee shields still in zap bags, as well as a couple of
regulated XBee Explorers.
On 25/09/2012 2:56 PM, "Ken" <k...@waggies.net> wrote:
I want to get in on the session where you introduce a kits of parts all
bought in one hit from one place, guaranteed to work if assembled properly,
and not costing an arm and a leg.
Though I'd love a 3D printer, my head is still hurting from trying to get
XBee thingies to cooperate. So I don't want the added compexities of a
half-baked 3D printer.
I still have a lot of XBee reading/learning to do.
Things I've learnt so far:
- XBee is not for the faint hearted if you want more than two to talk to
each other.
- PHP doesn't know how to read a serial port reliably. Perl on the
other hand, does, with very little code.
- Manufacturer's documentation doesn't tell the whole story.
- Though it isn't spec'd to, the LM35 will send a decent temperate
reading at a supply voltage of 3v.
- It *is* possible to brick an XBee module. (But I believe it can be
unbricked -haven't tried it yet).
Sorry, hijacking a thread here. Got carried away.
My first sentence still holds.
Ken.
On 25 September 2012 14:44, Tamsyn Michael <tamsyn.j.mich...@gmail.com>
wrote:
That may take a while, I have finally finished one of the two project that have been taking up all my time, so doing a bit of hacking again - I made my first bit for my printer on Friday night - cut 2 bits of threaded rod to length for the Z axis, and turned the ends down to suit bearings and the flexi-coupler that links them to the steppers. It's not much but at least its a start, next step the base of the frame I guess.
On Tuesday, September 25, 2012 2:56:04 PM UTC+9:30, Ken wrote:
> I want to get in on the session where you introduce a kits of parts all > bought in one hit from one place, guaranteed to work if assembled properly, > and not costing an arm and a leg.
> i'm coming in really late to this thread to say ideally i'd like to take
> the thingomatic apart and rebuild it so that i know how it works and how to
> fix it when it (inevitably) breaks every three days while i'm a nomadic
> fablab.
> but that needs to be numpty-level (which is pre-beginner).
> On 25 September 2012 13:38, Steven Pickles <thatpix...@gmail.com> wrote:
>> ahhh, so many questions answered now!
>> On 25 September 2012 12:48, Jonathan Wheare <jonathanwhe...@gmail.com>wrote:
>>> Pix & Ryan, I just double checked and the Start_PLA file in
>>> skeinforge/skeinforge_applications/alterations/ has the line:
>>> M92 X 80
>>> This adjusts the steps per milimeter of the x-axis for the hackerspace
>>> huxleys different gear size. I would suggest ensuring this line is
>>> removed before using the profile with Paul or Ryans huxleys.
>>> J.
>>> On Tue, 2012-09-25 at 12:13 +0930, Paul Schulz wrote:
>>> > Pix et.al. as a data point..
>>> > I printed the 'tardis' from STL (rather than the gcode file that was
>>> > there) and it came out square (ie with the correct aspect ratio).
>>> > > there is some unnecessary bloat in there like gcode etc...
>>> > > pix
>>> > > On 25 September 2012 11:46, Jonathan Wheare <
>>> jonathanwhe...@gmail.com>
>>> > > wrote:
>>> > >> Thanks Pix, I just realised I don't have the right profile on my
>>> laptop.
>>> > >> J.
>>> > >> On Tue, 2012-09-25 at 11:45 +0930, Steven Pickles wrote:
>>> > >> > i had trouble slicing with the latest git pull, weird aspect
>>> ratio. i
>>> > >> > ended up copying the profile from the huxley netbook too.
>>> > >> > im uploading it to google drive now, will post a link shortly.
>>> > >> > pix
>>> > >> > On 25 September 2012 11:37, Ryan Leach <ryan.the.le...@gmail.com>
>>> > >> > wrote:
>>> > >> > Jon, any chance of getting the hackerspaces firmware and
>>> > >> > skeinforge settings uploaded to the wiki or a github?
>>> > >> > been trying to get back into hacking/3d printing but it's
>>> > >> > doing my head in, (still facing the same old problems
>>> assuming
>>> > >> > its a combination of a bug fix in april, my skeinforge
>>> > >> > settings being out of date, and possible thermistor
>>> settings)
>>> > >> > also does anyone happen to know what the default settings
>>> for
>>> > >> > the xmas huxley kits were supposed to be?
>>> > >> > On Wed, Aug 15, 2012 at 11:27 AM, Jonathan Wheare
>>> > >> > <jonathanwhe...@gmail.com> wrote:
>>> > >> > I am in the process of build a Mendel using a mix
>>> of
>>> > >> > parts from the
>>> > >> > Prusa Mk2 and RRP designs. The ability to support
>>> > >> > multiple extruders is
>>> > >> > quite interesting.
>>> > >> > Currently the frame is assembled, but I'm still
>>> having
>>> > >> > troubles with the
>>> > >> > x-carriage print warping.
>>> > >> > J.
>>> > >> > On Tue, 2012-08-14 at 18:35 -0700,
>>> b...@iinet.net.au
>>> > >> > wrote:
>>> > >> > > Hi J,
>>> > >> > > Yes, I was told that at the show, that's why I
>>> wet
>>> > >> > Webbing for info on the RepRapPro kits. What was
>>> the
>>> > >> > PS problem - I'll check if fixed!
>>> > >> > > Anyone built the the RepRapPro Mendel in Adel?
>>> That
>>> > >> > is what I am interested in.
>>> > >> > > Brenton
>>> > >> > --
>>> > >> > You received this message because you are
>>> subscribed
>>> > >> > to the Google Groups "HackerSpace - Adelaide,
>>> South
>>> > >> > Australia" group.
>>> > >> > To post to this group, send email to
>>> > >> > hackerspace-adelaide@googlegroups.com.
>>> > >> > To unsubscribe from this group, send email to
>>> > >> > hackerspace-adelaide+unsubscribe@googlegroups.com
>>> .
>>> > >> > For more options, visit this group at
>>> > >> --
>>> > >> You received this message because you are subscribed to the Google
>>> Groups
>>> > >> "HackerSpace - Adelaide, South Australia" group.
>>> > >> To post to this group, send email to
>>> > >> hackerspace-adelaide@googlegroups.com.
>>> > >> To unsubscribe from this group, send email to
>>> > >> hackerspace-adelaide+unsubscribe@googlegroups.com.
>>> > >> For more options, visit this group at
>>> > >> http://groups.google.com/group/hackerspace-adelaide?hl=en.
>>> > > --
>>> > > You received this message because you are subscribed to the Google
>>> Groups
>>> > > "HackerSpace - Adelaide, South Australia" group.
>>> > > To post to this group, send email to
>>> hackerspace-adelaide@googlegroups.com.
>>> > > To unsubscribe from this group, send email to
>>> > > hackerspace-adelaide+unsubscribe@googlegroups.com.
>>> > > For more options, visit this group at
>>> > > http://groups.google.com/group/hackerspace-adelaide?hl=en.
>>> --
>>> You received this message because you are subscribed to the Google
>>> Groups "HackerSpace - Adelaide, South Australia" group.
>>> To post to this group, send email to
>>> hackerspace-adelaide@googlegroups.com.
>>> To unsubscribe from this group, send email to
>>> hackerspace-adelaide+unsubscribe@googlegroups.com.
>>> For more options, visit this group at
>>> http://groups.google.com/group/hackerspace-adelaide?hl=en.
>> --
>> You received this message because you are subscribed to the Google Groups
>> "HackerSpace - Adelaide, South Australia" group.
>> To post to this group, send email to
>> hackerspace-adelaide@googlegroups.com.
>> To unsubscribe from this group, send email to
>> hackerspace-adelaide+unsubscribe@googlegroups.com.
>> For more options, visit this group at
>> http://groups.google.com/group/hackerspace-adelaide?hl=en.
> --
> You received this message because you are subscribed to the Google Groups
> "HackerSpace - Adelaide, South Australia" group.
> To post to this group, send email to hackerspace-adelaide@googlegroups.com
> .
> To unsubscribe from this group, send email to
> hackerspace-adelaide+unsubscribe@googlegroups.com.
> For more options, visit this group at
> http://groups.google.com/group/hackerspace-adelaide?hl=en.
> On Tue, Sep 25, 2012 at 1:20 PM, Fee Plumley <f...@technoevangelist.net>wrote:
> > i'm coming in really late to this thread to say ideally i'd like to take
> > the thingomatic apart and rebuild it so that i know how it works and how to
> > fix it when it (inevitably) breaks every three days while i'm a nomadic
> > fablab.
> > but that needs to be numpty-level (which is pre-beginner).
> > On 25 September 2012 13:38, Steven Pickles <thatpix...@gmail.com> wrote:
> >> ahhh, so many questions answered now!
> >> On 25 September 2012 12:48, Jonathan Wheare <jonathanwhe...@gmail.com>wrote:
> >>> Pix & Ryan, I just double checked and the Start_PLA file in
> >>> skeinforge/skeinforge_applications/alterations/ has the line:
> >>> M92 X 80
> >>> This adjusts the steps per milimeter of the x-axis for the hackerspace
> >>> huxleys different gear size. I would suggest ensuring this line is
> >>> removed before using the profile with Paul or Ryans huxleys.
> >>> J.
> >>> On Tue, 2012-09-25 at 12:13 +0930, Paul Schulz wrote:
> >>> > Pix et.al. as a data point..
> >>> > I printed the 'tardis' from STL (rather than the gcode file that was
> >>> > there) and it came out square (ie with the correct aspect ratio).
> >>> > > there is some unnecessary bloat in there like gcode etc...
> >>> > > pix
> >>> > > On 25 September 2012 11:46, Jonathan Wheare <
> >>> jonathanwhe...@gmail.com>
> >>> > > wrote:
> >>> > >> Thanks Pix, I just realised I don't have the right profile on my
> >>> laptop.
> >>> > >> J.
> >>> > >> On Tue, 2012-09-25 at 11:45 +0930, Steven Pickles wrote:
> >>> > >> > i had trouble slicing with the latest git pull, weird aspect
> >>> ratio. i
> >>> > >> > ended up copying the profile from the huxley netbook too.
> >>> > >> > im uploading it to google drive now, will post a link shortly.
> >>> > >> > pix
> >>> > >> > On 25 September 2012 11:37, Ryan Leach <ryan.the.le...@gmail.com>
> >>> > >> > wrote:
> >>> > >> > Jon, any chance of getting the hackerspaces firmware and
> >>> > >> > skeinforge settings uploaded to the wiki or a github?
> >>> > >> > been trying to get back into hacking/3d printing but it's
> >>> > >> > doing my head in, (still facing the same old problems
> >>> assuming
> >>> > >> > its a combination of a bug fix in april, my skeinforge
> >>> > >> > settings being out of date, and possible thermistor
> >>> settings)
> >>> > >> > also does anyone happen to know what the default settings
> >>> for
> >>> > >> > the xmas huxley kits were supposed to be?
> >>> > >> > On Wed, Aug 15, 2012 at 11:27 AM, Jonathan Wheare
> >>> > >> > <jonathanwhe...@gmail.com> wrote:
> >>> > >> > I am in the process of build a Mendel using a mix
> >>> of
> >>> > >> > parts from the
> >>> > >> > Prusa Mk2 and RRP designs. The ability to support
> >>> > >> > multiple extruders is
> >>> > >> > quite interesting.
> >>> > >> > Currently the frame is assembled, but I'm still
> >>> having
> >>> > >> > troubles with the
> >>> > >> > x-carriage print warping.
> >>> > >> > J.
> >>> > >> > On Tue, 2012-08-14 at 18:35 -0700,
> >>> b...@iinet.net.au
> >>> > >> > wrote:
> >>> > >> > > Hi J,
> >>> > >> > > Yes, I was told that at the show, that's why I
> >>> wet
> >>> > >> > Webbing for info on the RepRapPro kits. What was
> >>> the
> >>> > >> > PS problem - I'll check if fixed!
> >>> > >> > > Anyone built the the RepRapPro Mendel in Adel?
> >>> That
> >>> > >> > is what I am interested in.
> >>> > >> > > Brenton
> >>> > >> > --
> >>> > >> > You received this message because you are
> >>> subscribed
> >>> > >> > to the Google Groups "HackerSpace - Adelaide,
> >>> South
> >>> > >> > Australia" group.
> >>> > >> > To post to this group, send email to
> >>> > >> > hackerspace-adelaide@googlegroups.com.
> >>> > >> > To unsubscribe from this group, send email to
> >>> > >> > hackerspace-adelaide+unsubscribe@googlegroups.com
> >>> .
> >>> > >> > For more options, visit this group at
> >>> > >> --
> >>> > >> You received this message because you are subscribed to the Google
> >>> Groups
> >>> > >> "HackerSpace - Adelaide, South Australia" group.
> >>> > >> To post to this group, send email to
> >>> > >> hackerspace-adelaide@googlegroups.com.
> >>> > >> To unsubscribe from this group, send email to
> >>> > >> hackerspace-adelaide+unsubscribe@googlegroups.com.
> >>> > >> For more options, visit this group at
> >>> > >>http://groups.google.com/group/hackerspace-adelaide?hl=en.
> >>> > > --
> >>> > > You received this message because you are subscribed to the Google
> >>> Groups
> >>> > > "HackerSpace - Adelaide, South Australia" group.
> >>> > > To post to this group, send email to
> >>> hackerspace-adelaide@googlegroups.com.
> >>> > > To unsubscribe from this group, send email to
> >>> > > hackerspace-adelaide+unsubscribe@googlegroups.com.
> >>> > > For more options, visit this group at
> >>> > >http://groups.google.com/group/hackerspace-adelaide?hl=en.
> >>> --
> >>> You received this message because you are subscribed to the Google
> >>> Groups "HackerSpace - Adelaide, South Australia" group.
> >>> To post to this group, send email to
> >>> hackerspace-adelaide@googlegroups.com.
> >>> To unsubscribe from this group, send email to
> >>> hackerspace-adelaide+unsubscribe@googlegroups.com.
> >>> For more options, visit this group at
> >>>http://groups.google.com/group/hackerspace-adelaide?hl=en.
> >> --
> >> You received this message because you are subscribed to the Google Groups
> >> "HackerSpace - Adelaide, South Australia" group.
> >> To post to this group, send email to
> >> hackerspace-adelaide@googlegroups.com.
> >> To unsubscribe from this group, send email to
> >> hackerspace-adelaide+unsubscribe@googlegroups.com.
> >> For more options, visit this group at
> >>http://groups.google.com/group/hackerspace-adelaide?hl=en.
> > --
> > You received this message because you are subscribed to the Google Groups
> > "HackerSpace - Adelaide, South Australia" group.
> > To post to this group, send email to hackerspace-adelaide@googlegroups.com
> > .
> > To unsubscribe from this group, send email to
> > hackerspace-adelaide+unsubscribe@googlegroups.com.
> > For more options, visit this group at
> >http://groups.google.com/group/hackerspace-adelaide?hl=en.
> I think this'd be a great dedicated hack session group build.
> Maybe Pix + fee on a desk in front of whoever is keen to watch, and
> pull apart / rebuild in a session.
> Separate it from general hacking so you don't get distracted, but
> please do run it during a hack session.
> si.
> On Sep 25, 3:11 pm, Ryan Leach <ryan.the.le...@gmail.com> wrote:
> > Sounds like smart thinking fee.
> > On Tue, Sep 25, 2012 at 1:20 PM, Fee Plumley <f...@technoevangelist.net
> >wrote:
> > > i'm coming in really late to this thread to say ideally i'd like to
> take
> > > the thingomatic apart and rebuild it so that i know how it works and
> how to
> > > fix it when it (inevitably) breaks every three days while i'm a nomadic
> > > fablab.
> > > but that needs to be numpty-level (which is pre-beginner).
> > > On 25 September 2012 13:38, Steven Pickles <thatpix...@gmail.com>
> wrote:
> > >> ahhh, so many questions answered now!
> > >> On 25 September 2012 12:48, Jonathan Wheare <jonathanwhe...@gmail.com
> >wrote:
> > >>> Pix & Ryan, I just double checked and the Start_PLA file in
> > >>> skeinforge/skeinforge_applications/alterations/ has the line:
> > >>> M92 X 80
> > >>> This adjusts the steps per milimeter of the x-axis for the
> hackerspace
> > >>> huxleys different gear size. I would suggest ensuring this line is
> > >>> removed before using the profile with Paul or Ryans huxleys.
> > >>> J.
> > >>> On Tue, 2012-09-25 at 12:13 +0930, Paul Schulz wrote:
> > >>> > Pix et.al. as a data point..
> > >>> > I printed the 'tardis' from STL (rather than the gcode file that
> was
> > >>> > there) and it came out square (ie with the correct aspect ratio).
> > >>> > > there is some unnecessary bloat in there like gcode etc...
> > >>> > > pix
> > >>> > > On 25 September 2012 11:46, Jonathan Wheare <
> > >>> jonathanwhe...@gmail.com>
> > >>> > > wrote:
> > >>> > >> Thanks Pix, I just realised I don't have the right profile on my
> > >>> laptop.
> > >>> > >> J.
> > >>> > >> On Tue, 2012-09-25 at 11:45 +0930, Steven Pickles wrote:
> > >>> > >> > i had trouble slicing with the latest git pull, weird aspect
> > >>> ratio. i
> > >>> > >> > ended up copying the profile from the huxley netbook too.
> > >>> > >> > im uploading it to google drive now, will post a link shortly.
> > >>> > >> > pix
> > >>> > >> > On 25 September 2012 11:37, Ryan Leach <
> ryan.the.le...@gmail.com>
> > >>> > >> > wrote:
> > >>> > >> > Jon, any chance of getting the hackerspaces firmware
> and
> > >>> > >> > skeinforge settings uploaded to the wiki or a github?
> > >>> > >> > been trying to get back into hacking/3d printing but
> it's
> > >>> > >> > doing my head in, (still facing the same old problems
> > >>> assuming
> > >>> > >> > its a combination of a bug fix in april, my skeinforge
> > >>> > >> > settings being out of date, and possible thermistor
> > >>> settings)
> > >>> > >> > also does anyone happen to know what the default
> settings
> > >>> for
> > >>> > >> > the xmas huxley kits were supposed to be?
> > >>> > >> > On Wed, Aug 15, 2012 at 11:27 AM, Jonathan Wheare
> > >>> > >> > <jonathanwhe...@gmail.com> wrote:
> > >>> > >> > I am in the process of build a Mendel using a
> mix
> > >>> of
> > >>> > >> > parts from the
> > >>> > >> > Prusa Mk2 and RRP designs. The ability to
> support
> > >>> > >> > multiple extruders is
> > >>> > >> > quite interesting.
> > >>> > >> > Currently the frame is assembled, but I'm
> still
> > >>> having
> > >>> > >> > troubles with the
> > >>> > >> > x-carriage print warping.
> > >>> > >> > J.
> > >>> > >> > On Tue, 2012-08-14 at 18:35 -0700,
> > >>> b...@iinet.net.au
> > >>> > >> > wrote:
> > >>> > >> > > Hi J,
> > >>> > >> > > Yes, I was told that at the show, that's
> why I
> > >>> wet
> > >>> > >> > Webbing for info on the RepRapPro kits. What
> was
> > >>> the
> > >>> > >> > PS problem - I'll check if fixed!
> > >>> > >> > > Anyone built the the RepRapPro Mendel in
> Adel?
> > >>> That
> > >>> > >> > is what I am interested in.
> > >>> > >> > > Brenton
> > >>> > >> > --
> > >>> > >> > You received this message because you are
> > >>> subscribed
> > >>> > >> > to the Google Groups "HackerSpace - Adelaide,
> > >>> South
> > >>> > >> > Australia" group.
> > >>> > >> > To post to this group, send email to
> > >>> > >> > hackerspace-adelaide@googlegroups.com.
> > >>> > >> > To unsubscribe from this group, send email to
> hackerspace-adelaide+unsubscribe@googlegroups.com
> > >>> .
> > >>> > >> > For more options, visit this group at
> > >>> > >> --
> > >>> > >> You received this message because you are subscribed to the
> Google
> > >>> Groups
> > >>> > >> "HackerSpace - Adelaide, South Australia" group.
> > >>> > >> To post to this group, send email to
> > >>> > >> hackerspace-adelaide@googlegroups.com.
> > >>> > >> To unsubscribe from this group, send email to
> > >>> > >> hackerspace-adelaide+unsubscribe@googlegroups.com.
> > >>> > >> For more options, visit this group at
> > >>> > >>http://groups.google.com/group/hackerspace-adelaide?hl=en.
> > >>> > > --
> > >>> > > You received this message because you are subscribed to the
> Google
> > >>> Groups
> > >>> > > "HackerSpace - Adelaide, South Australia" group.
> > >>> > > To post to this group, send email to
> > >>> hackerspace-adelaide@googlegroups.com.
> > >>> > > To unsubscribe from this group, send email to
> > >>> > > hackerspace-adelaide+unsubscribe@googlegroups.com.
> > >>> > > For more options, visit this group at
> > >>> > >http://groups.google.com/group/hackerspace-adelaide?hl=en.
> > >>> --
> > >>> You received this message because you are subscribed to the Google
> > >>> Groups "HackerSpace - Adelaide, South Australia" group.
> > >>> To post to this group, send email to
> > >>> hackerspace-adelaide@googlegroups.com.
> > >>> To unsubscribe from this group, send email to
> > >>> hackerspace-adelaide+unsubscribe@googlegroups.com.
> > >>> For more options, visit this group at
> > >>>http://groups.google.com/group/hackerspace-adelaide?hl=en.
> > >> --
> > >> You received this message because you are subscribed to the Google
> Groups
> > >> "HackerSpace - Adelaide, South Australia" group.
> > >> To post to this group, send email to
> > >> hackerspace-adelaide@googlegroups.com.
> > >> To unsubscribe from this group, send email to
> > >> hackerspace-adelaide+unsubscribe@googlegroups.com.
> > >> For more options, visit this group at
> > >>http://groups.google.com/group/hackerspace-adelaide?hl=en.
> > > --
> > > You received this message because you are subscribed to the Google
> Groups
> > > "HackerSpace - Adelaide, South Australia" group.
> > > To post to this group, send email to
> hackerspace-adelaide@googlegroups.com
> > > .
> > > To unsubscribe from this group, send email to
> > > hackerspace-adelaide+unsubscribe@googlegroups.com.
> > > For more options, visit this group at
> > >http://groups.google.com/group/hackerspace-adelaide?hl=en.
> --
> You received this message because you are subscribed to the Google Groups
> "HackerSpace - Adelaide, South Australia" group.
> To post to this group, send email to hackerspace-adelaide@googlegroups.com
> .
> To unsubscribe from this group, send email to
> hackerspace-adelaide+unsubscribe@googlegroups.com.
> For more options, visit this group at
> http://groups.google.com/group/hackerspace-adelaide?hl=en.
