On XP, I've been using cygwin and emacs for some time now.
One thing I have (incorrectly?) noted:
If I do START --> run --> cmd-window, and get that
little white-on-black blackboard-like window, yes
I can run sh, etc, and it all seems to work, even
complicated command-lines.
A problem with that (horrible) method is that:
a: there's no way to "paste" a long command or anything
else into that window -- you have to type everything
in *by hand*. So lots of typos you wouldn't have
if you could just cut from somewhere and pasted
into that blackboard-like window.
b: no way to get it to go full-screen.
c: and so on.
But yes, you can at least run a unix command-line,
pipes, `expand me exprs`, etc, all that good
stuff.
----
What would be really NICE would to be able to do
that from *shell*.
But I don't seem able to run the cygwin "sh" or
"tcsh" in *shell*. I can run cygwin stuff ok,
but not in complicated unix-like commands; it works
for me only if I do it one thing at a time, via
simple commands.
Question: is there a way to run complex command-lines
in *shell*?
> -----Original Message-----
> From: help-gnu-emacs-bounces+dougl=shubertticketing....@gnu.org
> [mailto:help-gnu-emacs-bounces+dougl=shubertticketing....@gnu.org] On
> Behalf Of David Combs
> Sent: Wednesday, 2012 October 03 00:40
> To: help-gnu-em...@gnu.org
> Subject: cygwin -- getting *shell* to parse pipes & other unix cmd-line
> stuff?
> On XP, I've been using cygwin and emacs for some time now.
> One thing I have (incorrectly?) noted:
> If I do START --> run --> cmd-window, and get that
> little white-on-black blackboard-like window, yes
> I can run sh, etc, and it all seems to work, even
> complicated command-lines.
> A problem with that (horrible) method is that:
> a: there's no way to "paste" a long command or anything
> else into that window -- you have to type everything
> in *by hand*. So lots of typos you wouldn't have
> if you could just cut from somewhere and pasted
> into that blackboard-like window.
> b: no way to get it to go full-screen.
> c: and so on.
> But yes, you can at least run a unix command-line,
> pipes, `expand me exprs`, etc, all that good
> stuff.
> ----
> What would be really NICE would to be able to do
> that from *shell*.
> But I don't seem able to run the cygwin "sh" or
> "tcsh" in *shell*. I can run cygwin stuff ok,
> but not in complicated unix-like commands; it works
> for me only if I do it one thing at a time, via
> simple commands.
> Question: is there a way to run complex command-lines
> in *shell*?
> On XP, I've been using cygwin and emacs for some time now.
> One thing I have (incorrectly?) noted:
> If I do START --> run --> cmd-window, and get that
> little white-on-black blackboard-like window, yes
> I can run sh, etc, and it all seems to work, even
> complicated command-lines.
> A problem with that (horrible) method is that:
> a: there's no way to "paste" a long command or anything
> else into that window -- you have to type everything
> in *by hand*. So lots of typos you wouldn't have
> if you could just cut from somewhere and pasted
> into that blackboard-like window.
Right-click the title bar of the cmd window and select Edit->Paste.
That's it!
>> On XP, I've been using cygwin and emacs for some time now.
>> One thing I have (incorrectly?) noted:
>> If I do START --> run --> cmd-window, and get that
>> little white-on-black blackboard-like window, yes
>> I can run sh, etc, and it all seems to work, even
>> complicated command-lines.
>> A problem with that (horrible) method is that:
>> a: there's no way to "paste" a long command or anything
>> else into that window -- you have to type everything
>> in *by hand*. So lots of typos you wouldn't have
>> if you could just cut from somewhere and pasted
>> into that blackboard-like window.
>Right-click the title bar of the cmd window and select Edit->Paste.
>That's it!
>> b: no way to get it to go full-screen.
>Try Alt-Enter.
>> c: and so on.
>What else?
Thanks!
OK, the edit--> paste works.
The alt-enter expands to full screen, but like a magnifying
glass. Same number of lines. Of course what you'd like
is a full 60 or so lines.
The enter--> menu has a greyed-out "copy" -- seems to be
now way to "blue out" (via sweeping the mouse) an area
within that window *to* "copy". What's the trick for
this one?
Thanks much!
Question: your use here is separate from using emacs,
yes?
Use emacs, *shell*, and within that (*shell*),
be able to pretend that I'm on a REAL computer,
and use the full unix/linix command-line parsing stuff,
eg "ls `cat foo.nam`", parens and subjobs, and >>EOF ... EOF,
all that stuff.
All without having to ever resort to the xp "cmd" window --
do it all straight out of the nice full-screen emacs
*shell* display.
Emacs already gives me the fiction that I'm on eg a
sun or linux, but where that falls down is in
*shell* typing in command-lines.
---
I've also tried, in *shell*, running the cygwin
tcsh, but with no success. (I forget the difficulty
I had, but it was complete, that difficulty.)
---
Something I noticed some time (years?) ago (still true?) was
that cygwin had two versions, new and old (or standard?),
but that the new one's bin had far fewer programs
than did the old one.
My version of cygwin is Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.
---------------------- OOPS: CURRENT AVAILABLE CYGWINI IS 1.7:
Just looked at http://cygwin.com/, saw that 1.7 is the
newest thing (I guess mine is pretty ancient), but that going to it requires lots of changes. Hmmm.
(Mine is 1.5)
Has everyone switched to 1.7, or are a lots of (smart)
people still using 1.5?
Sure wouldn't want to try to install the new one and
screw up and thus also lose the one I have!
Question: would 1.7 make my *shell* experience
a lot better, given the problems I've listed
above?
> Use emacs, *shell*, and within that (*shell*),
> be able to pretend that I'm on a REAL computer,
> and use the full unix/linix command-line parsing stuff,
> eg "ls `cat foo.nam`", parens and subjobs, and >>EOF ... EOF,
> all that stuff.
> All without having to ever resort to the xp "cmd" window --
> do it all straight out of the nice full-screen emacs
> *shell* display.
> The alt-enter expands to full screen, but like a magnifying
> glass. Same number of lines. Of course what you'd like
> is a full 60 or so lines.
I don't think it supports an arbitrary number of lines, only those
supported by the VGA mode of your video card. Try setting the cmd
window to 50 lines, and then I'd expect Alt-Enter to give you a
50-line full-screen display.
> The enter--> menu has a greyed-out "copy" -- seems to be
> now way to "blue out" (via sweeping the mouse) an area
> within that window *to* "copy". What's the trick for
> this one?
Edit->Mark, then mark with the mouse.
> Question: your use here is separate from using emacs,
> yes?
The above has nothing to do with Emacs at all, it's all basic Windows
trickery.
>> The alt-enter expands to full screen, but like a magnifying
>> glass. Same number of lines. Of course what you'd like
>> is a full 60 or so lines.
>I don't think it supports an arbitrary number of lines, only those
>supported by the VGA mode of your video card. Try setting the cmd
>window to 50 lines,
> In article <mailman.10880.1350113364.855.help-gnu-em...@gnu.org>,
> Eli Zaretskii <e...@gnu.org> wrote:
> >> From: dkco...@panix.com (David Combs)
> >> Date: Fri, 12 Oct 2012 21:11:33 +0000 (UTC)
> >> OK, the edit--> paste works.
> >> The alt-enter expands to full screen, but like a magnifying
> >> glass. Same number of lines. Of course what you'd like
> >> is a full 60 or so lines.
> >I don't think it supports an arbitrary number of lines, only those
> >supported by the VGA mode of your video card. Try setting the cmd
> >window to 50 lines,
> Thanks, but How?
Right-click on the window title bar, select Properties and under
"Layout" set the "Height" value in the "Window Size" group.
> > Right-click the title bar of the cmd window and select Edit->Paste.
> > That's it!
> I recommend instead use mintty from Cygwin (which replacement for rxvt and
> standard Cygwin terminal emulator).
> It allow paste by Shift+Inc and copy by mouse selection (whole line for double
> click).
So does the cmd window, if you set the QuickEdit option. (Well, no
Shift-Insert is supported, but right-clicking the mouse to paste is no
less convenient.)
>> > Right-click the title bar of the cmd window and select Edit->Paste.
>> > That's it!
>> I recommend instead use mintty from Cygwin (which replacement for rxvt and
>> standard Cygwin terminal emulator).
>> It allow paste by Shift+Inc and copy by mouse selection (whole line for
>> double click).
> So does the cmd window, if you set the QuickEdit option. (Well, no
> Shift-Insert is supported, but right-clicking the mouse to paste is no
> less convenient.)
Ok.
But most useful things from mintty is custom fonts and switchable background
colour (I definitely like black on white)...
Anyone can get another goodies, just read:
http://code.google.com/p/mintty/ Xterm-compatible terminal emulation
Comprehensive character encoding support, including UTF-8
256 colours
; 'Lucida Console' and 'Courier New' are the best fixed width font under Windows.
Font=Courier New
BoldAsFont=yes
FontHeight=10
AllowBlinking=no
FontSmoothing=None
BackspaceSendsBS=no
; Enable Ctrl+Ins and Shift+Ins.
ClipShortcuts=yes
; Disable Windows Alt+Space and Alt+Enter shortcuts.
WindowShortcuts=no
; Disable Ctrl+TAB and Ctrl+Shift+TAB shortcuts for use in screen(1).
SwitchShortcuts=no
; Enable font zooming shortcuts Ctrl+plus/minus/zero.
ZoomShortcuts=yes
; Shift, Ctrl, Alt, Off.
ScrollMod=Shift
CopyAsRTF=yes
; Use mouse copy on select like in X window.
CopyOnSelect=yes
ClicksPlaceCursor=no
RightClickAction=menu
